Linux IDE Archive

• Thread Index

• [patch] sata_dwc_460ex: indent an if statement
  • From: Dan Carpenter
• Re: [PATCH 40/86] ide/generic: use uapi/linux/pci_ids.h directly
  • From: Michael S. Tsirkin
• Re: [PATCH 40/86] ide/generic: use uapi/linux/pci_ids.h directly
  • From: Sergei Shtylyov
• [PATCH 40/86] ide/generic: use uapi/linux/pci_ids.h directly
  • From: Michael S. Tsirkin
• Re: Samsung SSD 850Pro firmware update queued TRIM problems
  • From: Simon Bourne
• Re: [PATCH 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH 2/2] libata: Blacklist queued TRIM on Samsung SSD 850 Pro
  • From: Tejun Heo
• [PATCH 2/2] libata: Blacklist queued TRIM on Samsung SSD 850 Pro
  • From: Martin K. Petersen
• [PATCH 1/2] libata: Update Crucial/Micron blacklist
  • From: Martin K. Petersen
• RE: [V7 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Moore, Robert
• Re: [PATCH 0/9] libata sense code update
  • From: Tejun Heo
• [PATCH 6/9] libata: Implement NCQ autosense
  • From: Hannes Reinecke
• [PATCH 2/9] libata: whitespace cleanup in ata_get_cmd_descript()
  • From: Hannes Reinecke
• [PATCH 5/9] libata: use status bit definitions in ata_dump_status()
  • From: Hannes Reinecke
• [PATCH 7/9] libata: Implement support for sense data reporting
  • From: Hannes Reinecke
• [PATCH 9/9] libata: Add tracepoints
  • From: Hannes Reinecke
• [PATCH 8/9] libata-eh: Set 'information' field for autosense
  • From: Hannes Reinecke
• [PATCH 7/9] libata: Implement support for sense data reporting
  • From: Hannes Reinecke
• [PATCH 3/9] libata: whitespace fixes in ata_to_sense_error()
  • From: Hannes Reinecke
• [PATCH 0/9] libata sense code update
  • From: Hannes Reinecke
• [PATCH 1/9] libata: use READ_LOG_DMA_EXT
  • From: Hannes Reinecke
• [PATCH 4/9] ide,ata: Rename ATA_IDX to ATA_SENSE
  • From: Hannes Reinecke
• Re: [V7 PATCH 0/3] Introduce ACPI support for ahci_platform driver
  • From: Mark Salter
• [V7 PATCH 2/3] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• [V7 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Suravee Suthikulpanit
• [V7 PATCH 3/3] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suravee Suthikulpanit
• [V7 PATCH 0/3] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulpanit
• Re: [V6 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Suravee Suthikulpanit
• Re: [V6 PATCH 2/3] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• Re: [V6 PATCH 2/3] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Hanjun Guo
• Re: [V6 PATCH 3/3] ata: ahci_platform: Add ACPI _CLS matching
  • From: Hanjun Guo
• Re: [V6 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Hanjun Guo
• Re: [V6 PATCH 3/3] ata: ahci_platform: Add ACPI _CLS matching
  • From: Mika Westerberg
• Re: [V6 PATCH 2/3] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Mika Westerberg
• Re: [V6 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Mika Westerberg
• Re: [PATCH 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Kishon Vijay Abraham I
• [V6 PATCH 3/3] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suravee Suthikulpanit
• [V6 PATCH 2/3] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• [V6 PATCH 0/3] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulpanit
• [V6 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Suravee Suthikulpanit
• Re: [V5 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Mika Westerberg
• Re: [V5 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• Re: [V5 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• Re: [V5 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Rafael J. Wysocki
• Re: [RFC PATCH] sg3_utils: Added hybrid information log utility
  • From: Douglas Gilbert
• [GIT PULL] libata fixes for v4.0-rc5
  • From: Tejun Heo
• [libata/for-4.1 PATCH] libata: remove ATA_FLAG_LOWTAG
  • From: Tejun Heo
• Re: [PATCH v1 2/2] sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev
  • From: Tejun Heo
• Re: [PATCH 1/1] sata_dwc_460ex: join messages back
  • From: Tejun Heo
• Re: [V5 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Mika Westerberg
• Re: [V5 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• Re: [RFC PATCH] sg3_utils: Added hybrid information log utility
  • From: Phillip Susi
• [PATCH v2 1/9] ata: at91: use syscon to configure the smc
  • From: Alexandre Belloni
• [PATCH v2 4/9] ARM: at91: declare the at91rm9200 memory controller as a syscon
  • From: Alexandre Belloni
• [PATCH v2 3/9] mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  • From: Alexandre Belloni
• [PATCH v2 2/9] ARM: at91: drop sam9_smc.c
  • From: Alexandre Belloni
• [PATCH v2 5/9] pcmcia: at91_cf: Use syscon to configure the MC/smc
  • From: Alexandre Belloni
• [PATCH v2 6/9] ARM: at91/pm: use the atmel-mc syscon defines
  • From: Alexandre Belloni
• [PATCH v2 7/9] ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h
  • From: Alexandre Belloni
• [PATCH v2 8/9] ARM: at91: remove at91rm9200_sdramc.h
  • From: Alexandre Belloni
• [PATCH v2 9/9] ARM: at91: remove useless Makefile.boot
  • From: Alexandre Belloni
• [PATCH v2 0/9] ARM: at91 cleanups for 4.1 #2
  • From: Alexandre Belloni
• Re: [PATCH 03/10] ata: at91: use syscon to configure the smc
  • From: Alexandre Belloni
• Re: [PATCH 05/10] mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  • From: Lee Jones
• Re: [PATCH 05/10] mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  • From: Lee Jones
• Re: [PATCH 01/10] ARM: at91/pm: move the standby functions to pm.c
  • From: Nicolas Ferre
• Re: [PATCH 02/10] ARM: at91/pm: move AT91_MEMCTRL_* to pm.h
  • From: Nicolas Ferre
• Re: [PATCH 00/10] ARM: at91 cleanups for 4.1 #2
  • From: Nicolas Ferre
• Re: [PATCH 03/10] ata: at91: use syscon to configure the smc
  • From: Nicolas Ferre
• Re: [PATCH 09/10] ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h
  • From: Nicolas Ferre
• Re: [PATCH 05/10] mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  • From: Nicolas Ferre
• Re: [PATCH 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Hans de Goede
• Re: [PATCH 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Florian Fainelli
• Re: [PATCH 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Florian Fainelli
• [PATCH v5] SATA: OCTEON: support SATA on OCTEON platform
  • From: Aleksey Makarov
• Re: [PATCH v4] SATA: OCTEON: support SATA on OCTEON platform
  • From: Aleksey Makarov
• Re: [PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs
  • From: Geert Uytterhoeven
• Re: [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Hans de Goede
• Re: [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Brian Norris
• Re: [PATCH RESEND] sata: xgene: add ACPI support for APM X-Gene SATA ports
  • From: Tejun Heo
• Re: [PATCH] ata: sata_mv: add proper definitions for LP_PHY_CTL register values
  • From: Tejun Heo
• [PATCH libata/for-4.0-fixes] ata: Add a new flag to destinguish sas controller
  • From: Tejun Heo
• Re: [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Brian Norris
• Re: [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Hans de Goede
• Re: [PATCH] ata: sata_mv: add proper definitions for LP_PHY_CTL register values
  • From: Simon Guinot
• SMRFFS - EXT4, and a few stack changes
  • From: Adrian Palmer
• Re: [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Brian Norris
• Re: [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Brian Norris
• [PATCH] ata: sata_mv: add proper definitions for LP_PHY_CTL register values
  • From: Thomas Petazzoni
• Re: [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Sergei Shtylyov
• Re: [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Hans de Goede
• Re: [PATCH RESEND] sata: xgene: add ACPI support for APM X-Gene SATA ports
  • From: Rafael J. Wysocki
• Re: [PATCH RESEND] sata: xgene: add ACPI support for APM X-Gene SATA ports
  • From: Mika Westerberg
• [GIT] IDE
  • From: David Miller
• Re: [PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs
  • From: David Miller
• [PATCH 1/5] Documentation: devicetree: add Broadcom SATA binding
  • From: Brian Norris
• [PATCH 2/5] Documentation: devicetree: add Broadcom SATA PHY binding
  • From: Brian Norris
• [PATCH 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Brian Norris
• [PATCH 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Brian Norris
• [PATCH 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Brian Norris
• [PATCH RESEND] sata: xgene: add ACPI support for APM X-Gene SATA ports
  • From: Feng Kan
• Re: [PATCH 01/35 linux-next] ata: constify of_device_id array
  • From: Fabian Frederick
• Re: [PATCH] sata: xgene: add ACPI support for APM X-Gene SATA ports
  • From: Feng Kan
• [PATCH 02/10] ARM: at91/pm: move AT91_MEMCTRL_* to pm.h
  • From: Alexandre Belloni
• [PATCH 00/10] ARM: at91 cleanups for 4.1 #2
  • From: Alexandre Belloni
• [PATCH 05/10] mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  • From: Alexandre Belloni
• [PATCH 03/10] ata: at91: use syscon to configure the smc
  • From: Alexandre Belloni
• [PATCH 04/10] ARM: at91: drop sam9_smc.c
  • From: Alexandre Belloni
• [PATCH 01/10] ARM: at91/pm: move the standby functions to pm.c
  • From: Alexandre Belloni
• [PATCH 10/10] ARM: at91: remove at91rm9200_sdramc.h
  • From: Alexandre Belloni
• [PATCH 07/10] pcmcia: at91_cf: Use syscon to configure the MC/smc
  • From: Alexandre Belloni
• [PATCH 08/10] ARM: at91/pm: use the atmel-mc syscon defines
  • From: Alexandre Belloni
• [PATCH 06/10] ARM: at91: declare the at91rm9200 memory controller as a syscon
  • From: Alexandre Belloni
• [PATCH 09/10] ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h
  • From: Alexandre Belloni
• Re: [PATCH 01/35 linux-next] ata: constify of_device_id array
  • From: Richard Weinberger
• [PATCH 00/35 linux-next] constify of_device_id array
  • From: Fabian Frederick
• [PATCH 14/35 linux-next] ide: pmac: constify of_device_id array
  • From: Fabian Frederick
• [PATCH 01/35 linux-next] ata: constify of_device_id array
  • From: Fabian Frederick
• Re: [PATCH] ide: pdc202xxx_new: Remove do_gettimeofday() usage for ktime_get
  • From: John Stultz
• Re: [PATCH] ide: pdc202xxx_new: Remove do_gettimeofday() usage for ktime_get
  • From: Sergei Shtylyov
• Re: [PATCH] libata: revert "libata: use blk taging" et al.
  • From: Shaohua Li
• [PATCH] ide: pdc202xxx_new: Remove do_gettimeofday() usage for ktime_get
  • From: John Stultz
• Re: [PATCH] libata: revert "libata: use blk taging" et al.
  • From: Tejun Heo
• Re: [PATCH] libata: revert "libata: use blk taging" et al.
  • From: Tony Battersby
• Re: [PATCH] libata: revert "libata: use blk taging" et al.
  • From: Shaohua Li
• Re: [PATCH] libata: revert "libata: use blk taging" et al.
  • From: Tejun Heo
• Re: [PATCH] libata: revert "libata: use blk taging" et al.
  • From: Dan Williams
• Re: [PATCH] libata: revert "libata: use blk taging" et al.
  • From: Shaohua Li
• Re: [PATCH] libata: revert "libata: use blk taging" et al.
  • From: Shaohua Li
• Re: [PATCH] libata: revert "libata: use blk taging" et al.
  • From: Tony Battersby
• Re: [PATCH] libata: revert "libata: use blk taging" et al.
  • From: Jens Axboe
• [PATCH] libata: revert "libata: use blk taging" et al.
  • From: Tony Battersby
• Re: [PATCH v4] SATA: OCTEON: support SATA on OCTEON platform
  • From: Arnd Bergmann
• [PATCH v4] SATA: OCTEON: support SATA on OCTEON platform
  • From: Aleksey Makarov
• Re: [V5 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Mika Westerberg
• [GIT PULL] libata fixes for v4.0-rc3
  • From: Tejun Heo
• Re: [PATCH v3] SATA: OCTEON: support SATA on OCTEON platform
  • From: Arnd Bergmann
• eSata problem
  • From: Fleck
• Re: [PATCH v3] SATA: OCTEON: support SATA on OCTEON platform
  • From: Hans de Goede
• Re: [V4 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulanit
• Re: [PATCH v3] SATA: OCTEON: support SATA on OCTEON platform
  • From: David Daney
• Re: [PATCH v3] SATA: OCTEON: support SATA on OCTEON platform
  • From: Hans de Goede
• [V5 PATCH 0/2] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulpanit
• [V5 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• [V5 PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suravee Suthikulpanit
• [PATCH v3] SATA: OCTEON: support SATA on OCTEON platform
  • From: Aleksey Makarov
• [PATCH v1 2/2] sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev
  • From: Andy Shevchenko
• [PATCH v1 1/2] sata_dwc_460ex: move to generic DMA driver
  • From: Andy Shevchenko
• [PATCH v1 0/2] sata_dwc_460ex: move to generic DMA driver
  • From: Andy Shevchenko
• [PATCH 1/1] sata_dwc_460ex: join messages back
  • From: Andy Shevchenko
• Re: [PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs
  • From: Sergei Shtylyov
• Re: [PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs
  • From: Nicholas Mc Guire
• Re: [PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs
  • From: Sergei Shtylyov
• Re: [PATCH 0/3] Enable ahci_st for stih407 and fix hang
  • From: Maxime Coquelin
• Re: [PATCH] ide_tape: convert jiffies with jiffies_to_msecs
  • From: Nicholas Mc Guire
• Re: [PATCH] ide_tape: convert jiffies with jiffies_to_msecs
  • From: Joe Perches
• Re: [PATCH] ide_tape: convert jiffies with jiffies_to_msecs
  • From: Nicholas Mc Guire
• [PATCH v2] ide_tape: convert jiffies with jiffies_to_msecs
  • From: Nicholas Mc Guire
• Re: [PATCH] ide_tape: convert jiffies with jiffies_to_msecs
  • From: Joe Perches
• [PATCH] ide_tape: convert jiffies with jiffies_to_msecs
  • From: Nicholas Mc Guire
• Re: [PATCH 2/3] ARM: DT: STi: STiH407: Add sata DT nodes.
  • From: Lee Jones
• Re: [PATCH] sata-fsl: Apply link speed limits
  • From: Tejun Heo
• Re: [PATCH 3/3] ahci: st: st_configure_oob must be called after IP is clocked.
  • From: Lee Jones
• Re: [PATCH 1/3] ahci: st: Update the ahci_st DT documentation
  • From: Lee Jones
• Re: [V4 PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suthikulpanit, Suravee
• Re: [V4 PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Tejun Heo
• [PATCH 2/3] ARM: DT: STi: STiH407: Add sata DT nodes.
  • From: Peter Griffin
• [PATCH 3/3] ahci: st: st_configure_oob must be called after IP is clocked.
  • From: Peter Griffin
• [PATCH 1/3] ahci: st: Update the ahci_st DT documentation
  • From: Peter Griffin
• [PATCH 0/3] Enable ahci_st for stih407 and fix hang
  • From: Peter Griffin
• [V4 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• [V4 PATCH 0/2] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulpanit
• [V4 PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suravee Suthikulpanit
• please help ID delay source
  • From: Felix Miata
• Re: Samsung SSD 850Pro firmware update queued TRIM problems
  • From: dimitrios tranoudakis
• Re: Samsung SSD 850Pro firmware update queued TRIM problems
  • From: Martin K. Petersen
• Re: Samsung SSD 850Pro firmware update queued TRIM problems
  • From: Stefan Keller
• Re: Samsung SSD 850Pro firmware update queued TRIM problems
  • From: Martin K. Petersen
• Samsung SSD 850Pro firmware update queued TRIM problems
  • From: Stefan Keller
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• [PATCH] sata-fsl: Apply link speed limits
  • From: Martin Hicks
• Re: [V3 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Mika Westerberg
• Re: [V3 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suthikulpanit, Suravee
• Re: SATA_DWC COMPILE_TEST is nasty horrid stuff (was "GIT PULL] libata changes for v3.20-rc1")
  • From: Andy Shevchenko
• Re: [systemd-devel] Making udev emit a signal when it is done loading modules
  • From: Mark Brown
• [PATCH] sata_dwc_460ex: disable COMPILE_TEST
  • From: Tejun Heo
• SATA_DWC COMPILE_TEST is nasty horrid stuff (was "GIT PULL] libata changes for v3.20-rc1")
  • From: Linus Torvalds
• Re: [PATCH] libata: fixup return type of wait_for_completion_timeout
  • From: Sergei Shtylyov
• [PATCH v2] libata: fixup wait_for_completion_timeout return handling
  • From: Nicholas Mc Guire
• Re: [PATCH] libata: fixup return type of wait_for_completion_timeout
  • From: Tejun Heo
• Re: [PATCH] libata: fixup return type of wait_for_completion_timeout
  • From: Nicholas Mc Guire
• Re: [PATCH] libata: fixup return type of wait_for_completion_timeout
  • From: Tejun Heo
• Re: [V3 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Rafael J. Wysocki
• Re: [V3 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Mika Westerberg
• [PATCH] libata: fixup return type of wait_for_completion_timeout
  • From: Nicholas Mc Guire
• Re: SATA disks disabled on boot
  • From: Nuno Magalhães
• Re: [V3 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suthikulpanit, Suravee
• Re: SATA disks disabled on boot
  • From: Phillip Susi
• Re: SATA disks disabled on boot
  • From: Nuno Magalhães
• [GIT PULL] libata changes for v3.20-rc1
  • From: Tejun Heo
• Re: [V3 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Mika Westerberg
• Re: [V3 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Greg Kroah-Hartman
• Re: [V3 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Rafael J. Wysocki
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Kenneth R. Crudup
• [V3 PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suravee Suthikulpanit
• Re: [V2 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• [V3 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• [V3 PATCH 0/2] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulpanit
• Re: [PATCH] ata:Remove no longer valid FIXME comment in pata_ninja32.c for the function,ninja32_init_one
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata:Remove no longer valid FIXME comment in pata_ninja32.c for the function,ninja32_init_one
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ata:Remove no longer valid FIXME comment in pata_ninja32.c for the function,ninja32_init_one
  • From: Bartlomiej Zolnierkiewicz
• Re: SATA disks disabled on boot
  • From: Phillip Susi
• Re: SATA disks disabled on boot
  • From: Nuno Magalhães
• Re: [PATCH v3] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Tejun Heo
• Re: [PATCH v3] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Suman Tripathi
• Re: [PATCH v2] ata: libahci: Use of_platform_device_create only if supported
  • From: Tejun Heo
• Re: [PATCH 2/2] sata_mv: More error handling for phy_power_off() in mv_platform_remove()
  • From: Tejun Heo
• Re: [PATCH 1/2] sata_mv: Delete unnecessary checks before the function call "phy_power_off"
  • From: Tejun Heo
• Re: [PATCH] ata: Delete unnecessary checks before the function call "pci_dev_put"
  • From: Tejun Heo
• [PATCH 2/2] sata_mv: More error handling for phy_power_off() in mv_platform_remove()
  • From: SF Markus Elfring
• [PATCH 1/2] sata_mv: Delete unnecessary checks before the function call "phy_power_off"
  • From: SF Markus Elfring
• [PATCH 0/2] sata_mv: Deletion of a few unnecessary checks
  • From: SF Markus Elfring
• [PATCH] ata: Delete unnecessary checks before the function call "pci_dev_put"
  • From: SF Markus Elfring
• Re: [PATCH v3] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Suman Tripathi
• Re: [PATCH v3] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Sergei Shtylyov
• Re: [PATCH v3] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Sergei Shtylyov
• [PATCH v3] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Suman Tripathi
• [PATCH v3] Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Suman Tripathi
• Re: [PATCH v2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Sergei Shtylyov
• [PATCH v2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Suman Tripathi
• [PATCH v2] Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Suman Tripathi
• Re: [PATCH v1] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Sergei Shtylyov
• [PATCH v1] Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Suman Tripathi
• [PATCH v1] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Suman Tripathi
• [PATCH v2] ata: libahci: Use of_platform_device_create only if supported
  • From: Guenter Roeck
• Re: [PATCH] ata: libahci: Use of_platform_device_create only if supported
  • From: Guenter Roeck
• Re: [PATCH] ata: libahci: Use of_platform_device_create only if supported
  • From: Tejun Heo
• Re: [PATCH] ata: libahci: Use of_platform_device_create only if supported
  • From: Guenter Roeck
• Re: [PATCH] ata: libahci: Use of_platform_device_create only if supported
  • From: Tejun Heo
• Re: linux-next: libahci_platform has undefined symbol on sparc
  • From: Gregory CLEMENT
• Re: [PATCH] ata: libahci: Use of_platform_device_create only if supported
  • From: Hans de Goede
• [PATCH] ata: libahci: Use of_platform_device_create only if supported
  • From: Guenter Roeck
• Re: linux-next: libahci_platform has undefined symbol on sparc
  • From: Hans de Goede
• Re: [PATCH 02/15] sata_svw: remove the dependency on PPC_OF
  • From: Tejun Heo
• [PATCH 02/15] sata_svw: remove the dependency on PPC_OF
  • From: Kevin Hao
• linux-next: libahci_platform has undefined symbol on sparc
  • From: Yann Droneaud
• Re: SATA disks disabled on boot
  • From: Phillip Susi
• Re: SATA disks disabled on boot
  • From: Nuno Magalhães
• [PATCH v2 2/2] ata: pata_platform: fix owner module reference mismatch for scsi host
  • From: Akinobu Mita
• Re: [PATCH v2 2/2] ata: pata_platform: fix owner module reference mismatch for scsi host
  • From: Tejun Heo
• Re: SATA disks disabled on boot
  • From: Phillip Susi
• [PATCH v2 1/2] ata: ahci_platform: fix owner module reference mismatch for scsi host
  • From: Akinobu Mita
• Re: [PATCH] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Suman Tripathi
• Re: [systemd-devel] Making udev emit a signal when it is done loading modules
  • From: Lennart Poettering
• Re: SATA disks disabled on boot
  • From: Nuno Magalhães
• Re: [PATCH] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Tejun Heo
• [PATCH] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Suman Tripathi
• [PATCH] Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
  • From: Suman Tripathi
• Re: [PATCH 1/2] ata: ahci_platform: fix owner module reference mismatch for scsi host
  • From: Tejun Heo
• Re: [PATCH v3] ata: Use 64-bit timekeeping
  • From: Tejun Heo
• Re: [PATCH v3] ata: Use 64-bit timekeeping
  • From: Arnd Bergmann
• [PATCH v3] ata: Use 64-bit timekeeping
  • From: Tina Ruchandani
• [PATCH 2/2] ata: pata_platform: fix owner module reference mismatch for scsi host
  • From: Akinobu Mita
• [PATCH 1/2] ata: ahci_platform: fix owner module reference mismatch for scsi host
  • From: Akinobu Mita
• Re: 64 bit kernel won't mount /
  • From: One Thousand Gnomes
• Re: [PATCH] libata: make sata_sil24 use fifo tag allocator
  • From: Dan Williams
• Re: [PATCH] libata: make sata_sil24 use fifo tag allocator
  • From: Tejun Heo
• Re: 64 bit kernel won't mount /
  • From: Phillip Susi
• [PATCH] libata: make sata_sil24 use fifo tag allocator
  • From: Shaohua Li
• Re: [PATCH v3 3/3] libata: use blk taging
  • From: Jens Axboe
• Re: [PATCH v3 3/3] libata: use blk taging
  • From: Tejun Heo
• [PATCH v2] SATA: OCTEON: support SATA on OCTEON platform
  • From: Aleksey Makarov
• Re: [PATCH] [BUG] libata: NULL pointer panic in ata_eh_link_report()
  • From: Jack Williams
• [PATCH] [BUG] libata: NULL pointer panic in ata_eh_link_report()
  • From: Jack Williams
• Re: 64 bit kernel won't mount /
  • From: Gene Heskett
• Re: [PATCH] SATA: OCTEON: support SATA on OCTEON platform
  • From: Aaro Koskinen
• Re: [PATCH v3 3/3] libata: use blk taging
  • From: Shaohua Li
• Re: Sata_inic 162x support is broken message
  • From: One Thousand Gnomes
• Re: 64 bit kernel won't mount /
  • From: One Thousand Gnomes
• Re: [PATCH] SATA: OCTEON: support SATA on OCTEON platform
  • From: Mark Rutland
• Re: [PATCH] SATA: OCTEON: support SATA on OCTEON platform
  • From: Rob Herring
• Re: [PATCH v4 00/11] scsi: fix module reference mismatch for scsi host
  • From: Akinobu Mita
• Re: [V2 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Rafael J. Wysocki
• Sata_inic 162x support is broken message
  • From: Richard Nolde
• Re: [PATCH] SATA: OCTEON: support SATA on OCTEON platform
  • From: David Daney
• Re: 64 bit kernel won't mount /
  • From: Gene Heskett
• Re: 64 bit kernel won't mount /
  • From: One Thousand Gnomes
• Re: [PATCH] SATA: OCTEON: support SATA on OCTEON platform
  • From: Mark Rutland
• Re: next-20150120 broken on Tegra by "ata: libahci: Allow using multiple regulators"
  • From: Tejun Heo
• Re: next-20150120 broken on Tegra by "ata: libahci: Allow using multiple regulators"
  • From: Thierry Reding
• Re: next-20150120 broken on Tegra by "ata: libahci: Allow using multiple regulators"
  • From: Tejun Heo
• Re: next-20150120 broken on Tegra by "ata: libahci: Allow using multiple regulators"
  • From: Gregory CLEMENT
• Re: next-20150120 broken on Tegra by "ata: libahci: Allow using multiple regulators"
  • From: Thierry Reding
• next-20150120 broken on Tegra by "ata: libahci: Allow using multiple regulators"
  • From: Paul Walmsley
• [GIT PULL] libata fixes for v3.19-rc5
  • From: Tejun Heo
• Re: [PATCH v4 00/11] scsi: fix module reference mismatch for scsi host
  • From: Alan Stern
• Re: [PATCH v4 00/11] scsi: fix module reference mismatch for scsi host
  • From: Tejun Heo
• Re: [PATCH v4 00/11] scsi: fix module reference mismatch for scsi host
  • From: Akinobu Mita
• Re: 64 bit kernel won't mount /
  • From: Gene Heskett
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Kenneth R. Crudup
• Re: [PATCH] SATA: OCTEON: support SATA on OCTEON platform
  • From: Arnd Bergmann
• Re: [PATCH] SATA: OCTEON: support SATA on OCTEON platform
  • From: Rob Herring
• Re: [PATCH v2] libata: prevent HSM state change race between ISR and PIO
  • From: Tejun Heo
• Re: [PATCH v2] libata: prevent HSM state change race between ISR and PIO
  • From: David Milburn
• Re: [PATCH] SATA: OCTEON: support SATA on OCTEON platform
  • From: David Daney
• [PATCH v2] libata: prevent HSM state change race between ISR and PIO
  • From: Tejun Heo
• [PATCH v2] libata: prevent HSM state change race between ISR and PIO
  • From: David Milburn
• Re: [PATCH] libata: prevent HSM state change race between ISR and PIO
  • From: David Milburn
• Re: [PATCH] libata: prevent HSM state change race between ISR and PIO
  • From: Tejun Heo
• Re: [PATCHv2] libata: fixup oops in ata_eh_link_report()
  • From: Sergei Shtylyov
• 64 bit kernel won't mount /
  • From: Gene Heskett
• [PATCH] libata: prevent HSM state change race between ISR and PIO
  • From: David Milburn
• [PATCHv2] libata: fixup oops in ata_eh_link_report()
  • From: Hannes Reinecke
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Alan Stern
• Re: [PATCH] SATA: OCTEON: support SATA on OCTEON platform
  • From: Mark Rutland
• Re: [PATCH] libata: fixup oops in ata_eh_link_report()
  • From: Sergey Senozhatsky
• [PATCH] SATA: OCTEON: support SATA on OCTEON platform
  • From: Aleksey Makarov
• Re: [PATCH v4 0/4] ata: libahci: Allow using a regulator for each port
  • From: Andrew Lunn
• Re: [PATCH v4 0/4] ata: libahci: Allow using a regulator for each port
  • From: Tejun Heo
• Re: [PATCH] libata: fixup oops in ata_eh_link_report()
  • From: Hannes Reinecke
• Re: [PATCH] libata: fixup oops in ata_eh_link_report()
  • From: Sergey Senozhatsky
• Re: [PATCH 1/2] libata: allow sata_sil24 to opt-out of tag ordered submission
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: allow sata_sil24 to opt-out of tag ordered submission
  • From: Sergei Shtylyov
• Re: [PATCH] libata: fixup oops in ata_eh_link_report()
  • From: Tejun Heo
• Re: [PATCH v4 00/11] scsi: fix module reference mismatch for scsi host
  • From: Tejun Heo
• Re: [PATCH] sata_rcar: extend PM methods
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: micro-optimize tag allocation
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: allow sata_sil24 to opt-out of tag ordered submission
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: allow sata_sil24 to opt-out of tag ordered submission
  • From: Tejun Heo
• [PATCH] libata: fixup oops in ata_eh_link_report()
  • From: Hannes Reinecke
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Kenneth R. Crudup
• Re: Queued TRIM without NCQ support
  • From: Boszormenyi Zoltan
• Re: Queued TRIM without NCQ support
  • From: Robert Hancock
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Mark Brown
• Re: [PATCH v4 10/11] ata: ahci_platform: adjust module reference for scsi host
  • From: Hans de Goede
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Hans de Goede
• [PATCH v4 11/11] ata: pata_of_platform: adjust module reference for scsi host
  • From: Akinobu Mita
• [PATCH v4 10/11] ata: ahci_platform: adjust module reference for scsi host
  • From: Akinobu Mita
• [PATCH v4 07/11] scsi: move module reference from scsi_host_template to Scsi_Host
  • From: Akinobu Mita
• [PATCH v4 01/11] ata: prepare to move module reference from scsi_host_template to Scsi_Host
  • From: Akinobu Mita
• [PATCH v4 00/11] scsi: fix module reference mismatch for scsi host
  • From: Akinobu Mita
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Mark Brown
• n_sectors mismatch - revalidation failed - resume S3
  • From: poma
• Re: Queued TRIM without NCQ support
  • From: Boszormenyi Zoltan
• Re: Queued TRIM without NCQ support
  • From: Robert Hancock
• Re: [PATCH 1/2] libata: allow sata_sil24 to opt-out of tag ordered submission
  • From: Sergei Shtylyov
• Re: [systemd-devel] Making udev emit a signal when it is done loading modules
  • From: Kay Sievers
• Re: [systemd-devel] Making udev emit a signal when it is done loading modules
  • From: Zbigniew Jędrzejewski-Szmek
• Re: [systemd-devel] Making udev emit a signal when it is done loading modules
  • From: David Herrmann
• Re: [systemd-devel] Making udev emit a signal when it is done loading modules
  • From: jonsmirl@xxxxxxxxx
• Re: [systemd-devel] Making udev emit a signal when it is done loading modules
  • From: Hans de Goede
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Hans de Goede
• Re: [systemd-devel] Making udev emit a signal when it is done loading modules
  • From: Mark Brown
• Re: [systemd-devel] Making udev emit a signal when it is done loading modules
  • From: Greg KH
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Mark Brown
• Re: [PATCH 1/2] libata: allow sata_sil24 to opt-out of tag ordered submission
  • From: Sergei Shtylyov
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Hans de Goede
• Making udev emit a signal when it is done loading modules
  • From: Hans de Goede
• Re: [PATCH 2/2] libata: micro-optimize tag allocation
  • From: Shaohua Li
• Re: [PATCH 2/2] libata: micro-optimize tag allocation
  • From: Dan Williams
• Re: [PATCH 2/2] libata: micro-optimize tag allocation
  • From: Shaohua Li
• Re: [PATCH 2/2] libata: micro-optimize tag allocation
  • From: Dan Williams
• Re: [PATCH 2/2] libata: micro-optimize tag allocation
  • From: Dan Williams
• Re: [PATCH 2/2] libata: micro-optimize tag allocation
  • From: Shaohua Li
• Re: [PATCH 2/2] libata: micro-optimize tag allocation
  • From: Jens Axboe
• Re: [PATCH 2/2] libata: micro-optimize tag allocation
  • From: Dan Williams
• Re: [PATCH 2/2] libata: micro-optimize tag allocation
  • From: Jens Axboe
• [PATCH 2/2] libata: micro-optimize tag allocation
  • From: Dan Williams
• [PATCH 1/2] libata: allow sata_sil24 to opt-out of tag ordered submission
  • From: Dan Williams
• [PATCH 0/2] fix sil24 regression and muddy the ata tag allocation waters
  • From: Dan Williams
• [PATCH] sata_rcar: extend PM methods
  • From: Sergei Shtylyov
• Re: [PATCH v3 3/3] libata: use blk taging
  • From: Shaohua Li
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Mark Brown
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Mark Brown
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Hans de Goede
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Hans de Goede
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Mark Brown
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Gregory CLEMENT
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Mark Brown
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Hans de Goede
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Gregory CLEMENT
• Re: [PATCH v3 3/3] libata: use blk taging
  • From: Christoph Hellwig
• Re: [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Hans de Goede
• Re: [PATCH v4 0/4] ata: libahci: Allow using a regulator for each port
  • From: Hans de Goede
• [PATCH v3 3/3] libata: use blk taging
  • From: Shaohua Li
• [PATCH v3 2/3] blk-mq: add tag allocation policy
  • From: Shaohua Li
• [PATCH v3 1/3] block: support different tag allocation policy
  • From: Shaohua Li
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Jens Axboe
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Dan Williams
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Jens Axboe
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Tejun Heo
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Dan Williams
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Tejun Heo
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Shaohua Li
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Tejun Heo
• [PATCH v4 3/4] ata: libahci: Allow using multiple regulators
  • From: Gregory CLEMENT
• [PATCH v4 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Gregory CLEMENT
• [PATCH v4 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Gregory CLEMENT
• [PATCH v4 1/4] ata: libahci: Clean-up the ahci_platform_en/disable_phys functions
  • From: Gregory CLEMENT
• [PATCH v4 0/4] ata: libahci: Allow using a regulator for each port
  • From: Gregory CLEMENT
• Re: [PATCH v3 3/4] ata: libahci: Allow using multiple regulators
  • From: Gregory CLEMENT
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Christoph Hellwig
• Re: [PATCH v3 3/4] ata: libahci: Allow using multiple regulators
  • From: Hans de Goede
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Dan Williams
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Shaohua Li
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Dan Williams
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Shaohua Li
• Re: [Linaro-acpi] [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Grant Likely
• Re: ata_eh_report() unable to handle kernel NULL pointer dereference
  • From: Tejun Heo
• Re: ata_eh_report() unable to handle kernel NULL pointer dereference
  • From: Sergey Senozhatsky
• Re: [PATCH] ata: pata_at91: depend on !ARCH_MULTIPLATFORM
  • From: Nicolas Ferre
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Dan Williams
• Re: [PATCH] ata: pata_at91: depend on !ARCH_MULTIPLATFORM
  • From: Tejun Heo
• Re: [LSF/MM TOPIC] - SMR Modifications to EXT4 (and other generic file systems)
  • From: Adrian Palmer
• [PATCH] ata: pata_at91: depend on !ARCH_MULTIPLATFORM
  • From: Alexandre Belloni
• Re: [PATCH 1/1] ahci: Remove Device ID for Intel Sunrise Point PCH
  • From: Tejun Heo
• Re: ata_eh_report() unable to handle kernel NULL pointer dereference
  • From: Tejun Heo
• [PATCH v3 1/4] ata: libahci: Clean-up the ahci_platform_en/disable_phys functions
  • From: Gregory CLEMENT
• [PATCH v3 3/4] ata: libahci: Allow using multiple regulators
  • From: Gregory CLEMENT
• [PATCH v3 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Gregory CLEMENT
• [PATCH v3 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Gregory CLEMENT
• ata_eh_report() unable to handle kernel NULL pointer dereference
  • From: Sergey Senozhatsky
• [PATCH v3 0/4] ata: libahci: Allow using a regulator for each port
  • From: Gregory CLEMENT
• Re: [PATCH] sata: xgene: add ACPI support for APM X-Gene SATA ports
  • From: Hanjun Guo
• [PATCH 1/1] ahci: Remove Device ID for Intel Sunrise Point PCH
  • From: James Ralston
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• Re: SATA link power management issues
  • From: Suman Tripathi
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• Re: SATA link power management issues
  • From: Tejun Heo
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• Re: SATA link power management issues
  • From: Tejun Heo
• Re: sata_dwc_460ex build failures in -next
  • From: Mark Brown
• Re: [PATCH v1] sata_dwc_460ex: disable compilation on ARM and ARM64
  • From: Tejun Heo
• Re: sata_dwc_460ex build failures in -next
  • From: Andy Shevchenko
• [PATCH v1] sata_dwc_460ex: disable compilation on ARM and ARM64
  • From: Andy Shevchenko
• Re: sata_dwc_460ex build failures in -next
  • From: Russell King - ARM Linux
• Re: [PATCH v2 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Gregory CLEMENT
• sata_dwc_460ex build failures in -next
  • From: Mark Brown
• Re: Marvell 88SE9320 SATA controller failure during heavy load
  • From: Jeroen Van den Keybus
• Re: Marvell 88SE9320 SATA controller failure during heavy load
  • From: Tim Small
• Re: [PATCH] ata: libata-core: Remove unused function
  • From: Tejun Heo
• [PATCH] ata: libata-core: Remove unused function
  • From: Rickard Strandqvist
• Marvell 88SE9320 SATA controller failure during heavy load
  • From: Jeroen Van den Keybus
• Re: [PATCH v2 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Hans de Goede
• Re: [Lsf-pc] [LSF/MM TOPIC] - SMR Modifications to EXT4 (and other generic file systems)
  • From: Hannes Reinecke
• Re: [PATCH v2 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Mark Brown
• Re: [PATCH v2 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Hans de Goede
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Shaohua Li
• Re: SATA link power management issues
  • From: Tejun Heo
• Re: SATA link power management issues
  • From: Tejun Heo
• Re: SATA link power management issues
  • From: Tejun Heo
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Shaohua Li
• Re: [PATCH] ahci: Use dev_info() to inform about the lack of Device Sleep support
  • From: Tejun Heo
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Tejun Heo
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Tejun Heo
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• Re: [PATCH v2 3/3] libata: use blk taging
  • From: Shaohua Li
• Re: [PATCH v2 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Mark Brown
• Re: [PATCH v2 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Chen-Yu Tsai
• Re: [PATCH v2 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Gregory CLEMENT
• Re: [PATCH v2 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Hans de Goede
• [PATCH v2 2/4] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Gregory CLEMENT
• [PATCH v2 1/4] ata: libahci: Clean-up the ahci_platform_en/disable_phys functions
  • From: Gregory CLEMENT
• [PATCH v2 0/4] ata: libahci: Allow using a regulator for each port
  • From: Gregory CLEMENT
• [PATCH v2 4/4] ARM: mvebu: Armada 385 GP: Add regulators to the SATA port
  • From: Gregory CLEMENT
• [PATCH v2 3/4] ata: libahci: Allow using multiple regulators
  • From: Gregory CLEMENT
• LSF/MM 2015 Reminder about call for proposals
  • From: Mel Gorman
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Andreas Dilger
• SATA link power management issues
  • From: Gabriele Mazzotta
• [PATCH] ahci: Use dev_info() to inform about the lack of Device Sleep support
  • From: Gabriele Mazzotta
• Re: [PATCH] sata: xgene: add ACPI support for APM X-Gene SATA ports
  • From: Hanjun Guo
• Re: [PATCH] sata: xgene: add ACPI support for APM X-Gene SATA ports
  • From: Feng Kan
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Tim Small
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Tejun Heo
• [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Tejun Heo
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Phillip Susi
• Re: [PATCH v1 3/3] sata_dwc_460ex: convert to devm_kzalloc in ->probe()
  • From: Tejun Heo
• Re: [PATCH v1 4/4] sata_dwc_460ex: fix most of the sparse warnings
  • From: Tejun Heo
• Queued TRIM without NCQ support
  • From: Boszormenyi Zoltan
• [PATCH v1 3/3] sata_dwc_460ex: convert to devm_kzalloc in ->probe()
  • From: Andy Shevchenko
• [PATCH v1 2/3] sata_dwc_460ex: remove extra message
  • From: Andy Shevchenko
• [PATCH v1 1/3] sata_dwc_460ex: use np local variable in ->probe()
  • From: Andy Shevchenko
• Re: [PATCH] sata: xgene: add ACPI support for APM X-Gene SATA ports
  • From: Hanjun Guo
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Andreas Dilger
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Phillip Susi
• Re: [V2 PATCH 0/2] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulanit
• Re: [PATCH][RFC] ide: pdc202xxx_new: Remove do_gettimeofday() usage for ktime_get
  • From: Arnd Bergmann
• [PATCH][RFC] ide: pdc202xxx_new: Remove do_gettimeofday() usage for ktime_get
  • From: John Stultz
• Re: [PATCH] sata: xgene: add ACPI support for APM X-Gene SATA ports
  • From: Feng Kan
• RE: Faculty staff and student email notification
  • From: catering
• Re: [PATCH v1 4/4] sata_dwc_460ex: fix most of the sparse warnings
  • From: Tejun Heo
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Tejun Heo
• Re: [PATCH] libata: Remove FIXME comment in atapi_eh_request_sense
  • From: Tejun Heo
• Re: [Lsf-pc] [LSF/MM TOPIC] - SMR Modifications to EXT4 (and other generic file systems)
  • From: Sasha Levin
• Re: attempting task abort with block: remove artifical max_hw_sectors cap
  • From: Christoph Hellwig
• [PATCH v1 4/4] sata_dwc_460ex: fix most of the sparse warnings
  • From: Andy Shevchenko
• [PATCH v1 3/4] sata_dwc_460ex: enable COMPILE_TEST for the driver
  • From: Andy Shevchenko
• [PATCH v1 1/4] sata_dwc_460ex: fix resource leak on error path
  • From: Andy Shevchenko
• [PATCH v1 2/4] sata_dwc_460ex: remove redundant dev_set_drvdata
  • From: Andy Shevchenko
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Dave Chinner
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Tejun Heo
• Re: PMP product ID mismatch
  • From: Phillip Susi
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• [PATCH libata/for-3.19-fixes] ata: add MAINTAINERS entry for libata PATA drivers
  • From: Tejun Heo
• [PATCH libata/for-3.19-fixes] libata: clean up MAINTAINERS entries
  • From: Tejun Heo
• Re: [PATCH 3/3] ata: libahci: Allow to use multiple regulators
  • From: Gregory CLEMENT
• Re: [PATCH 1/2] regulator: core: Add a sanity check on the regulator_ enable/disable functions
  • From: Mark Brown
• Re: [PATCH v1 0/2] Add the PMP support for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Tejun Heo
• Re: [PATCH v1 0/2] Add the PMP support for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• Re: [PATCH v1 0/2] Add the PMP support for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• Re: [PATCH v1 0/2] Add the PMP support for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Tejun Heo
• Re: [PATCH 2/2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_PACKET PIO mode command.
  • From: Tejun Heo
• Re: [PATCH 1/2] regulator: core: Add a sanity check on the regulator_ enable/disable functions
  • From: Gregory CLEMENT
• Re: [PATCH 1/2] regulator: core: Add a sanity check on the regulator_ enable/disable functions
  • From: Mark Brown
• Re: [PATCH 1/2] regulator: core: Add a sanity check on the regulator_ enable/disable functions
  • From: Gregory CLEMENT
• attempting task abort with block: remove artifical max_hw_sectors cap
  • From: Stefan Priebe - Profihost AG
• [PATCH v1 2/2] ahci_xgene: Implement the workaround to support PMP enumeration and discovery.
  • From: Suman Tripathi
• [PATCH v1 0/2] Add the PMP support for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• [PATCH v1 1/2] ahci_xgene: Implement the xgene_ahci_poll_reg_val to support PMP.
  • From: Suman Tripathi
• Re: [PATCH 2/2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_PACKET PIO mode command.
  • From: Suman Tripathi
• Re: inic162x
  • From: Dale R. Worley
• PMP product ID mismatch
  • From: Phillip Susi
• Re: [V2 PATCH 0/2] Introduce ACPI support for ahci_platform driver
  • From: Rafael J. Wysocki
• [V2 PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suravee Suthikulpanit
• [V2 PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• [V2 PATCH 0/2] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulpanit
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Kenneth R. Crudup
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Alan Stern
• Re: [PATCH v1] libata: export ata_get_cmd_descript()
  • From: Andy Shevchenko
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Christoph Hellwig
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Christoph Hellwig
• Re: [PATCH] drivers:ata: Fix spelling typos in libata-scsi.c and the header file,ata.h
  • From: Tejun Heo
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Tejun Heo
• Re: [PATCH v1] libata: export ata_get_cmd_descript()
  • From: Tejun Heo
• Re: [PATCH] libata: add ledtrig support
  • From: Tejun Heo
• Re: inic162x
  • From: One Thousand Gnomes
• Re: [PATCH 1/2] ahci_xgene: Fix the xgene_ahci_restart_engine function to support Port Multiplier for APM X-Gene SoC AHCI SATA host controller driver.
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] ahci_xgene: Implement the workaround to support PMP enumeration and discovery for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Tejun Heo
• Re: [PATCH v3 2/2] ahci_xgene: Fix the DMA state machine lockup for the ATA_CMD_PACKET PIO mode command.
  • From: Tejun Heo
• Re: [PATCH 2/2] ahci_xgene: Implement the workaround to support PMP enumeration and discovery for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• Re: [PATCH 2/2] ahci_xgene: Implement the workaround to support PMP enumeration and discovery for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Tejun Heo
• Re: [PATCH 2/2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_PACKET PIO mode command.
  • From: Tejun Heo
• Re: [PATCH 2/2] ahci_xgene: Implement the workaround to support PMP enumeration and discovery for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Tejun Heo
• [PATCH 0/2] Add the PMP support for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• [PATCH 2/2] ahci_xgene: Implement the workaround to support PMP enumeration and discovery for APM X-Gene SoC AHCI SATA Host Controller driver.
  • From: Suman Tripathi
• [PATCH 1/2] ahci_xgene: Fix the xgene_ahci_restart_engine function to support Port Multiplier for APM X-Gene SoC AHCI SATA host controller driver.
  • From: Suman Tripathi
• inic162x
  • From: mtths
• Re: [PATCH v2 2/3] blk-mq: add tag allocation policy
  • From: Shaohua Li
• Re: Question about FIXME in au1xxx-ide.c
  • From: David Miller
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: James Bottomley
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Alan Stern
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Kenneth R. Crudup
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: James Bottomley
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Douglas Gilbert
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Alan Stern
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: James Bottomley
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Alan Stern
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Christoph Hellwig
• Re: [PATCH 2/2] regulator: core: Add the device tree version to the regulator_get family
  • From: Mark Brown
• Re: [PATCH 1/2] regulator: core: Add a sanity check on the regulator_ enable/disable functions
  • From: Mark Brown
• Re: [PATCH 2/2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_PACKET PIO mode command.
  • From: Sergei Shtylyov
• [PATCH v3 2/2] ahci_xgene: Fix the DMA state machine lockup for the ATA_CMD_PACKET PIO mode command.
  • From: Suman Tripathi
• [PATCH v3 1/2] ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver.
  • From: Suman Tripathi
• [PATCH v3 0/2] ahci_xgene: Bug fixes in APM X-Gene Soc AHCI SATA controller driver.
  • From: Suman Tripathi
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Alan Stern
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Christoph Hellwig
• Re: [PATCH 3/3] ata: libahci: Allow to use multiple regulators
  • From: Hans de Goede
• Re: [PATCH 3/3] ata: libahci: Allow to use multiple regulators
  • From: Hans de Goede
• [PATCH 2/3] Documentation: bindings: Add the regulator property to the sub-nodes AHCI bindings
  • From: Gregory CLEMENT
• [PATCH 3/3] ata: libahci: Allow to use multiple regulators
  • From: Gregory CLEMENT
• [PATCH 1/3] ata: libahci: Clean-up the ahci_platform_en/disable_phys functions
  • From: Gregory CLEMENT
• [PATCH 0/3] ata: libahci: Allow using a regulator for each port
  • From: Gregory CLEMENT
• Re: [PATCHv2] drivers:ata: Remove unneeded fix me comment for the function,mv_print_info in sata_mv.c
  • From: Tejun Heo
• Re: [PATCH] drivers:ata: Remove unneeded fix me comment for the function,mv_print_info in sata_mv.c
  • From: Tejun Heo
• Re: Question about mv_print_info in sata_mv.c in sata_mv.c
  • From: tj@xxxxxxxxxx >> Tejun Heo
• Re: Question about mv_print_info in sata_mv.c in sata_mv.c
  • From: Rob Herring
• [no subject]
  • From: Gregory CLEMENT
• [PATCH 2/2] regulator: core: Add the device tree version to the regulator_get family
  • From: Gregory CLEMENT
• [PATCH 1/2] regulator: core: Add a sanity check on the regulator_ enable/disable functions
  • From: Gregory CLEMENT
• Re: [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Tejun Heo
• Re: [PATCH] drivers:ata: Fix spelling typos in libata-scsi.c and the header file,ata.h
  • From: Tejun Heo
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Kenneth R. Crudup
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Kenneth R. Crudup
• Re: Issues with commit 34b48db6 ("block: remove artifical max_hw_sectors cap")
  • From: Christoph Hellwig
• Re: [PATCH v2 2/3] blk-mq: add tag allocation policy
  • From: Jens Axboe
• Re: [PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Hanjun Guo
• Re: [PATCH v5 2/3] libata: async resume
  • From: Phillip Susi
• Re: [PATCH v5 2/3] libata: async resume
  • From: Phillip Susi
• [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suravee Suthikulpanit
• [PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• [PATCH 0/2] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulpanit
• Re: [RFC PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulanit
• Re: [Linaro-acpi] [RFC PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suravee Suthikulanit
• Re: [RFC PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Hanjun Guo
• Driver for Initio inic162x
  • From: Dale R. Worley
• [PATCH v2 3/3] libata: use blk taging
  • From: Shaohua Li
• [PATCH v2 1/3] block: support different tag allocation policy
  • From: Shaohua Li
• [PATCH v2 2/3] blk-mq: add tag allocation policy
  • From: Shaohua Li
• Re: [Linaro-acpi] [RFC PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Arnd Bergmann
• Re: [RFC PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Hans de Goede
• [RFC PATCH 0/2] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulpanit
• [RFC PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suravee Suthikulpanit
• [RFC PATCH 1/2] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• Re: [PATCH 2/2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_PACKET PIO mode command.
  • From: Sergei Shtylyov
• [PATCH v1 2/2] ahci_xgene: Fix the DMA state machine lockup for the ATA_CMD_PACKET PIO mode command.
  • From: Suman Tripathi
• [PATCH v1 1/2] ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver.
  • From: Suman Tripathi
• Re: [PATCH 2/2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_PACKET PIO mode command.
  • From: Sergei Shtylyov
• [PATCH 2/2] ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_PACKET PIO mode command.
  • From: Suman Tripathi
• [PATCH 1/2] ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver.
  • From: Suman Tripathi
• [PATCH RESEND 0/2] ahci_xgene: Bug fixes in APM X-Gene Soc AHCI SATA controller driver.
  • From: Suman Tripathi
• [PATCH 0/2] * ahci_xgene: Bug fixes in APM X-Gene Soc AHCI SATA controller driver.
  • From: Suman Tripathi
• Re: [RFC PATCH] sg3_utils: Added hybrid information log utility
  • From: Phillip Susi
• Re: [PATCH 1/2] block: support different tag allocation policy
  • From: Christoph Hellwig
• Re: [PATCH 1/2] block: support different tag allocation policy
  • From: Shaohua Li
• Re: [PATCH 2/2] libata: use generic taging
  • From: Christoph Hellwig
• Re: [PATCH 1/2] block: support different tag allocation policy
  • From: Christoph Hellwig
• [PATCH 2/2] libata: use generic taging
  • From: Shaohua Li
• [PATCH 1/2] block: support different tag allocation policy
  • From: Shaohua Li
• [PATCH v2] libata: add ledtrig support
  • From: Daniel Golle
• [GIT] IDE
  • From: David Miller
• Re: [PATCH] drivers: ide: Fix mostly harmless off-by-one hardcoded value
  • From: David Miller
• Re: [PATCH 1/1] IDE: Deletion of an unnecessary check before the function call "module_put"
  • From: David Miller
• [PATCH] libata: add ledtrig support
  • From: Daniel Golle
• Re: [PATCH v1] libata: export ata_get_cmd_descript()
  • From: Andy Shevchenko
• Re: [PATCH v1] libata: export ata_get_cmd_descript()
  • From: Sergei Shtylyov
• [PATCH v1] libata: export ata_get_cmd_descript()
  • From: Andy Shevchenko
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Ming Lei
• [PATCH] sata: xgene: add ACPI support for APM X-Gene SATA ports
  • From: Feng Kan
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: James Bottomley
• [GIT PULL] libata changes for v3.19-rc1
  • From: Tejun Heo
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Tim Small
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Tejun Heo
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: James Bottomley
• Re: [PATCH 1/3] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: One Thousand Gnomes
• Re: [PATCH 1/3] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: James Bottomley
• Re: [PATCH 1/3] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Theodore Ts'o
• [GIT PULL] libata fixes for v3.18-rc7
  • From: Tejun Heo
• RE: [PATCH 1/3] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Elliott, Robert (Server Storage)
• Re: SATA disks disabled on boot
  • From: Nuno Magalhães
• Re: [PATCH 1/3] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Paolo Bonzini
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Tejun Heo
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• Re: SATA disks disabled on boot
  • From: Phillip Susi
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: One Thousand Gnomes
• Re: Another FIXME in libata-scsi.c
  • From: Tejun Heo
• Re: Another FIXME in libata-scsi.c
  • From: Tejun Heo
• [PATCH] ahci: disable MSI on SAMSUNG 0xa800 SSD
  • From: Tejun Heo
• [PATCH libata/for-3.19] libata: Remove FIXME comment in atapi_request_sense()
  • From: Tejun Heo
• Re: SATA disks disabled on boot
  • From: Tejun Heo
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Tejun Heo
• Re: [PATCH] ata: add MAINTAINERS entry for libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Phillip Susi
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Phillip Susi
• Re: [PATCH] libata: Whitelist SSDs that are known to properly return zeroes after TRIM
  • From: Martin K. Petersen