include/soc/at91/at91rm9200_sdramc.h is replaced by include/linux/mfd/syscon/atmel-smc.h as this is actually a syscon device. Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx> --- include/soc/at91/at91rm9200_sdramc.h | 63 ------------------------------------ 1 file changed, 63 deletions(-) delete mode 100644 include/soc/at91/at91rm9200_sdramc.h diff --git a/include/soc/at91/at91rm9200_sdramc.h b/include/soc/at91/at91rm9200_sdramc.h deleted file mode 100644 index aa047f458f1b..000000000000 --- a/include/soc/at91/at91rm9200_sdramc.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Memory Controllers (SDRAMC only) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_SDRAMC_H -#define AT91RM9200_SDRAMC_H - -/* SDRAM Controller registers */ -#define AT91RM9200_SDRAMC_MR 0x90 /* Mode Register */ -#define AT91RM9200_SDRAMC_MODE (0xf << 0) /* Command Mode */ -#define AT91RM9200_SDRAMC_MODE_NORMAL (0 << 0) -#define AT91RM9200_SDRAMC_MODE_NOP (1 << 0) -#define AT91RM9200_SDRAMC_MODE_PRECHARGE (2 << 0) -#define AT91RM9200_SDRAMC_MODE_LMR (3 << 0) -#define AT91RM9200_SDRAMC_MODE_REFRESH (4 << 0) -#define AT91RM9200_SDRAMC_DBW (1 << 4) /* Data Bus Width */ -#define AT91RM9200_SDRAMC_DBW_32 (0 << 4) -#define AT91RM9200_SDRAMC_DBW_16 (1 << 4) - -#define AT91RM9200_SDRAMC_TR 0x94 /* Refresh Timer Register */ -#define AT91RM9200_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */ - -#define AT91RM9200_SDRAMC_CR 0x98 /* Configuration Register */ -#define AT91RM9200_SDRAMC_NC (3 << 0) /* Number of Column Bits */ -#define AT91RM9200_SDRAMC_NC_8 (0 << 0) -#define AT91RM9200_SDRAMC_NC_9 (1 << 0) -#define AT91RM9200_SDRAMC_NC_10 (2 << 0) -#define AT91RM9200_SDRAMC_NC_11 (3 << 0) -#define AT91RM9200_SDRAMC_NR (3 << 2) /* Number of Row Bits */ -#define AT91RM9200_SDRAMC_NR_11 (0 << 2) -#define AT91RM9200_SDRAMC_NR_12 (1 << 2) -#define AT91RM9200_SDRAMC_NR_13 (2 << 2) -#define AT91RM9200_SDRAMC_NB (1 << 4) /* Number of Banks */ -#define AT91RM9200_SDRAMC_NB_2 (0 << 4) -#define AT91RM9200_SDRAMC_NB_4 (1 << 4) -#define AT91RM9200_SDRAMC_CAS (3 << 5) /* CAS Latency */ -#define AT91RM9200_SDRAMC_CAS_2 (2 << 5) -#define AT91RM9200_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */ -#define AT91RM9200_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */ -#define AT91RM9200_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */ -#define AT91RM9200_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */ -#define AT91RM9200_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */ -#define AT91RM9200_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */ - -#define AT91RM9200_SDRAMC_SRR 0x9c /* Self Refresh Register */ -#define AT91RM9200_SDRAMC_LPR 0xa0 /* Low Power Register */ -#define AT91RM9200_SDRAMC_IER 0xa4 /* Interrupt Enable Register */ -#define AT91RM9200_SDRAMC_IDR 0xa8 /* Interrupt Disable Register */ -#define AT91RM9200_SDRAMC_IMR 0xac /* Interrupt Mask Register */ -#define AT91RM9200_SDRAMC_ISR 0xb0 /* Interrupt Status Register */ - -#endif -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
