The standby functions are now only used in pm.c, move them there.
Also, they are not inlined as a pointer to those functions is passed to the
cpuidle driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-at91/pm.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-at91/pm.h | 92 -------------------------------------------------
2 files changed, 89 insertions(+), 92 deletions(-)
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index f93a735ba327..5062699cbb12 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -222,6 +222,95 @@ static void at91_pm_set_standby(void (*at91_standby)(void))
at91_cpuidle_device.dev.platform_data = at91_standby;
}
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ *
+ * Self-refresh mode is exited as soon as a memory access is made, but we don't
+ * know for sure when that happens. However, we need to restore the low-power
+ * mode if it was enabled before going idle. Restoring low-power mode while
+ * still in self-refresh is "not recommended", but seems to work.
+ */
+static void at91rm9200_standby(void)
+{
+ u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
+
+ asm volatile(
+ "b 1f\n\t"
+ ".align 5\n\t"
+ "1: mcr p15, 0, %0, c7, c10, 4\n\t"
+ " str %0, [%1, %2]\n\t"
+ " str %3, [%1, %4]\n\t"
+ " mcr p15, 0, %0, c7, c0, 4\n\t"
+ " str %5, [%1, %2]"
+ :
+ : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
+ "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
+ "r" (lpr));
+}
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static void at91_ddr_standby(void)
+{
+ /* Those two values allow us to delay self-refresh activation
+ * to the maximum. */
+ u32 lpr0, lpr1 = 0;
+ u32 saved_lpr0, saved_lpr1 = 0;
+
+ if (at91_ramc_base[1]) {
+ saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+ lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+ }
+
+ saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+ lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+ lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+ /* self-refresh mode now */
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+
+ cpu_do_idle();
+
+ at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+}
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static void at91sam9_sdram_standby(void)
+{
+ u32 lpr0, lpr1 = 0;
+ u32 saved_lpr0, saved_lpr1 = 0;
+
+ if (at91_ramc_base[1]) {
+ saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+ lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+ }
+
+ saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
+ lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
+ lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+
+ /* self-refresh mode now */
+ at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
+
+ cpu_do_idle();
+
+ at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
+ if (at91_ramc_base[1])
+ at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
+}
+
static const struct of_device_id ramc_ids[] __initconst = {
{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index dcacfa1ad3fa..3223967d3460 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -23,96 +23,4 @@
#define AT91_PM_SLOW_CLOCK 0x01
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- *
- * Self-refresh mode is exited as soon as a memory access is made, but we don't
- * know for sure when that happens. However, we need to restore the low-power
- * mode if it was enabled before going idle. Restoring low-power mode while
- * still in self-refresh is "not recommended", but seems to work.
- */
-
-#ifndef __ASSEMBLY__
-static inline void at91rm9200_standby(void)
-{
- u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
-
- asm volatile(
- "b 1f\n\t"
- ".align 5\n\t"
- "1: mcr p15, 0, %0, c7, c10, 4\n\t"
- " str %0, [%1, %2]\n\t"
- " str %3, [%1, %4]\n\t"
- " mcr p15, 0, %0, c7, c0, 4\n\t"
- " str %5, [%1, %2]"
- :
- : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
- "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
- "r" (lpr));
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91_ddr_standby(void)
-{
- /* Those two values allow us to delay self-refresh activation
- * to the maximum. */
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
- lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
- lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
- lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
- lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91sam9_sdram_standby(void)
-{
- u32 lpr0, lpr1 = 0;
- u32 saved_lpr0, saved_lpr1 = 0;
-
- if (at91_ramc_base[1]) {
- saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
- lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
- lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
- }
-
- saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
- lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
- lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
-
- /* self-refresh mode now */
- at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
-
- cpu_do_idle();
-
- at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
- at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
-#endif
#endif
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
