Re: [PATCH 09/10] ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 16/03/2015 23:44, Alexandre Belloni a écrit :
> mach/at91_ramc.h and mach/at91rm9200_mc.h are necessary anymore, remove them.

s/are/aren't/ ?

> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
> ---
>  arch/arm/mach-at91/Makefile                     |   3 -
>  arch/arm/mach-at91/include/mach/at91_ramc.h     |  28 ------
>  arch/arm/mach-at91/include/mach/at91rm9200_mc.h | 116 ------------------------
>  arch/arm/mach-at91/pm.h                         |  14 ++-
>  arch/arm/mach-at91/pm_suspend.S                 |   1 -
>  5 files changed, 13 insertions(+), 149 deletions(-)
>  delete mode 100644 arch/arm/mach-at91/include/mach/at91_ramc.h
>  delete mode 100644 arch/arm/mach-at91/include/mach/at91rm9200_mc.h
> 
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 3586d977e99d..fa4393ab3e7b 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -1,9 +1,6 @@
>  #
>  # Makefile for the linux kernel.
>  #
> -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
> -asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
> -
>  obj-y		:= soc.o
>  
>  # CPU-specific support
> diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h
> deleted file mode 100644
> index 39547496d4b0..000000000000
> --- a/arch/arm/mach-at91/include/mach/at91_ramc.h
> +++ /dev/null
> @@ -1,28 +0,0 @@
> -/*
> - * Header file for the Atmel RAM Controller
> - *
> - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
> - *
> - * Under GPLv2 only
> - */
> -
> -#ifndef __AT91_RAMC_H__
> -#define __AT91_RAMC_H__
> -
> -#ifndef __ASSEMBLY__
> -extern void __iomem *at91_ramc_base[];
> -
> -#define at91_ramc_read(id, field) \
> -	__raw_readl(at91_ramc_base[id] + field)
> -
> -#define at91_ramc_write(id, field, value) \
> -	__raw_writel(value, at91_ramc_base[id] + field)
> -#else
> -.extern at91_ramc_base
> -#endif
> -
> -#include <linux/mfd/syscon/atmel-mc.h>
> -#include <soc/at91/at91sam9_ddrsdr.h>
> -#include <soc/at91/at91sam9_sdramc.h>
> -
> -#endif /* __AT91_RAMC_H__ */
> diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
> deleted file mode 100644
> index aeaadfb452af..000000000000
> --- a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
> +++ /dev/null
> @@ -1,116 +0,0 @@
> -/*
> - * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
> - *
> - * Copyright (C) 2005 Ivan Kokshaysky
> - * Copyright (C) SAN People
> - *
> - * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
> - * Based on AT91RM9200 datasheet revision E.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#ifndef AT91RM9200_MC_H
> -#define AT91RM9200_MC_H
> -
> -/* Memory Controller */
> -#define AT91_MC_RCR		0x00			/* MC Remap Control Register */
> -#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
> -
> -#define AT91_MC_ASR		0x04			/* MC Abort Status Register */
> -#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
> -#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
> -#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
> -#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
> -#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
> -#define			AT91_MC_ABTSZ_WORD		(2 << 8)
> -#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
> -#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
> -#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
> -#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
> -#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
> -#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
> -#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
> -#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
> -#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
> -#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
> -#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
> -#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
> -
> -#define AT91_MC_AASR		0x08			/* MC Abort Address Status Register */
> -
> -#define AT91_MC_MPR		0x0c			/* MC Master Priority Register */
> -#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
> -#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
> -#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
> -#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
> -
> -/* External Bus Interface (EBI) registers */
> -#define AT91_EBI_CSA		0x60			/* Chip Select Assignment Register */
> -#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
> -#define			AT91_EBI_CS0A_SMC		(0 << 0)
> -#define			AT91_EBI_CS0A_BFC		(1 << 0)
> -#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
> -#define			AT91_EBI_CS1A_SMC		(0 << 1)
> -#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
> -#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
> -#define			AT91_EBI_CS3A_SMC		(0 << 3)
> -#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
> -#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
> -#define			AT91_EBI_CS4A_SMC		(0 << 4)
> -#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
> -#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
> -#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
> -
> -/* Static Memory Controller (SMC) registers */
> -#define	AT91_SMC_CSR(n)		(0x70 + ((n) * 4))	/* SMC Chip Select Register */
> -#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
> -#define			AT91_SMC_NWS_(x)	((x) << 0)
> -#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
> -#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
> -#define			AT91_SMC_TDF_(x)	((x) << 8)
> -#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
> -#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
> -#define			AT91_SMC_DBW_16		(1 << 13)
> -#define			AT91_SMC_DBW_8		(2 << 13)
> -#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
> -#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
> -#define			AT91_SMC_ACSS_STD	(0 << 16)
> -#define			AT91_SMC_ACSS_1		(1 << 16)
> -#define			AT91_SMC_ACSS_2		(2 << 16)
> -#define			AT91_SMC_ACSS_3		(3 << 16)
> -#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
> -#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
> -#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
> -#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
> -
> -/* Burst Flash Controller register */
> -#define AT91_BFC_MR		0xc0			/* Mode Register */
> -#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
> -#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
> -#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
> -#define			AT91_BFC_BFCOM_BURST	(2 << 0)
> -#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
> -#define			AT91_BFC_BFCC_MCK	(1 << 2)
> -#define			AT91_BFC_BFCC_DIV2	(2 << 2)
> -#define			AT91_BFC_BFCC_DIV4	(3 << 2)
> -#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
> -#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
> -#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
> -#define			AT91_BFC_PAGES_16	(1 << 8)
> -#define			AT91_BFC_PAGES_32	(2 << 8)
> -#define			AT91_BFC_PAGES_64	(3 << 8)
> -#define			AT91_BFC_PAGES_128	(4 << 8)
> -#define			AT91_BFC_PAGES_256	(5 << 8)
> -#define			AT91_BFC_PAGES_512	(6 << 8)
> -#define			AT91_BFC_PAGES_1024	(7 << 8)
> -#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
> -#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
> -#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
> -#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
> -#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
> -
> -#endif
> diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
> index ecd875a91d52..3fcf8810f14e 100644
> --- a/arch/arm/mach-at91/pm.h
> +++ b/arch/arm/mach-at91/pm.h
> @@ -13,7 +13,19 @@
>  
>  #include <asm/proc-fns.h>
>  
> -#include <mach/at91_ramc.h>
> +#include <linux/mfd/syscon/atmel-mc.h>
> +#include <soc/at91/at91sam9_ddrsdr.h>
> +#include <soc/at91/at91sam9_sdramc.h>
> +
> +#ifndef __ASSEMBLY__
> +extern void __iomem *at91_ramc_base[];
> +
> +#define at91_ramc_read(id, field) \
> +	__raw_readl(at91_ramc_base[id] + field)
> +
> +#define at91_ramc_write(id, field, value) \
> +	__raw_writel(value, at91_ramc_base[id] + field)
> +#endif
>  
>  #define AT91_MEMCTRL_MC		0
>  #define AT91_MEMCTRL_SDRAMC	1
> diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
> index fda4e0164ed7..0d95f488b47a 100644
> --- a/arch/arm/mach-at91/pm_suspend.S
> +++ b/arch/arm/mach-at91/pm_suspend.S
> @@ -13,7 +13,6 @@
>   */
>  #include <linux/linkage.h>
>  #include <linux/clk/at91_pmc.h>
> -#include <mach/at91_ramc.h>
>  #include "pm.h"
>  
>  #define	SRAMC_SELF_FRESH_ACTIVE		0x01
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux