Linux IDE Archive

• Thread Index

• Re: raid5-cache I/O path improvements
  • From: Shaohua Li
• Re: [PATCH 1/3] Revert "ahci: added support for Freescale AHCI sata"
  • From: Tejun Heo
• Re: raid5-cache I/O path improvements
  • From: Christoph Hellwig
• Re: raid5-cache I/O path improvements
  • From: Tejun Heo
• Re: raid5-cache I/O path improvements
  • From: Tejun Heo
• Re: raid5-cache I/O path improvements
  • From: Christoph Hellwig
• Re: [PATCH 1/3] Revert "ahci: added support for Freescale AHCI sata"
  • From: Hans de Goede
• [PATCH 3/3 v2] ahci: added a new driver for supporting Freescale AHCI sata
  • From: Yuantian.Tang
• [PATCH 2/3] devicetree:bindings: add devicetree bindings for Freescale AHCI
  • From: Yuantian.Tang
• [PATCH 1/3] Revert "ahci: added support for Freescale AHCI sata"
  • From: Yuantian.Tang
• Re: [PATCH] ahci: added a new driver for supporting Freescale AHCI sata
  • From: Hans de Goede
• RE: [PATCH] ahci: added a new driver for supporting Freescale AHCI sata
  • From: Yuantian Tang
• [GIT PULL] libata changes for 4.3
  • From: Tejun Heo
• Re: [PATCH] ahci: added a new driver for supporting Freescale AHCI sata
  • From: Hans de Goede
• [PATCH] ahci: added a new driver for supporting Freescale AHCI sata
  • From: Yuantian.Tang
• [GIT PULL] libata fixes for v4.2-rc8
  • From: Tejun Heo
• Re: [PATCH] Add factory recertified Crucial M500s to blacklist
  • From: Guillermo Amaral
• Re: [PATCH] Add factory recertified Crucial M500s to blacklist
  • From: Tejun Heo
• Re: [PATCH] Add factory recertified Crucial M500s to blacklist
  • From: Martin K. Petersen
• Re: linux: sata_nv: adma support
  • From: Pali Rohár
• [PATCH] Add factory recertified Crucial M500s to blacklist
  • From: Guillermo A. Amaral
• libata-core: Trim blacklist entry for refurbished M500 SSDs
  • From: Guillermo A. Amaral
• Re: linux: sata_nv: adma support
  • From: Robert Hancock
• Re: [PATCH v3] MIPS: Remove all the uses of custom gpio.h
  • From: Linus Walleij
• Re: linux: sata_nv: adma support
  • From: Pali Rohár
• Re: linux: sata_nv: adma support
  • From: Mark Lord
• Re: ahci_imx: can read corrupted data successfully
  • From: Tejun Heo
• ahci_imx: can read corrupted data successfully
  • From: Russell King - ARM Linux
• Re: [PATCH] ata: pata_arasam_cf: Use devm_clk_get
  • From: Tejun Heo
• [PATCH] ata: pata_arasam_cf: Use devm_clk_get
  • From: Vaishali Thakkar
• Likely race condition for some disk interface / peripherals combinations (hung processes, high iowait)
  • From: Sergio Callegari
• Kernel broken for some disk interface / disks combinations
  • From: Sergio Callegari
• Re: [RFT PATCH] ia64: zx1_defconfig: convert to use libata PATA drivers
  • From: Émeric MASCHINO
• RE: [RFT PATCH] ia64: zx1_defconfig: convert to use libata PATA drivers
  • From: Luck, Tony
• [GIT PULL] libata fixes for v4.2-rc7
  • From: Tejun Heo
• Re: [RFT PATCH] ia64: zx1_defconfig: convert to use libata PATA drivers
  • From: Émeric MASCHINO
• Re: [RFT PATCH] ia64: generic_defconfig: convert to use libata PATA drivers
  • From: Sergei Shtylyov
• [RFT PATCH v2] ia64: generic_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH v2] ia64: tiger_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH v2] ia64: gensparse_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH v2] ia64: bigsur_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFT PATCH] ia64: generic_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFT PATCH] ia64: generic_defconfig: convert to use libata PATA drivers
  • From: Sergei Shtylyov
• [RFT PATCH] ia64: gensparse_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] ia64: generic_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] ia64: zx1_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] ia64: tiger_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] ia64: bigsur_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v3] MIPS: Remove all the uses of custom gpio.h
  • From: Alexandre Courbot
• Re: [RFT PATCH] arm: omap1_defconfig: convert to use libata PATA drivers
  • From: Tony Lindgren
• Re: [PATCH] arm: mainstone_defconfig: disable IDE subsystem
  • From: Robert Jarzmik
• Re: [PATCH] arm: footbridge_defconfig: disable IDE subsystem
  • From: Russell King - ARM Linux
• Re: [PATCH] arm: footbridge_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] arm: footbridge_defconfig: disable IDE subsystem
  • From: Russell King - ARM Linux
• Re: [RFT PATCH] arm: collie_defconfig: convert to use libata PATA drivers
  • From: Dmitry Eremin-Solenikov
• [PATCH] arm: badge4_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: cerfcube_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: colibri_pxa270_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: collie_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: corgi_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: footbridge_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: h3600_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: ixp4xx_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: jornada720_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: lart_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: lpda270_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: mainstone_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: omap1_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: netwinder_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: pxa255-idp_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: shannon_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: s3c2410_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: trizeps4_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: spitz_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: assabet_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: am200epdkit_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt370x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] New: pata_hpt370x driver doesn't want to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• mocking EH
  • From: Andy Falanga (afalanga)
• Re: NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Andrey Korolyov
• Re: NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Tim Small
• Re: NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Andy Smith
• Re: NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Andy Smith
• Re: NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Tim Small
• Re: [PATCH] libata: fix libata-core.c kernel-doc warning
  • From: Tejun Heo
• Re: 4.1-rc6: ATA link is slow to respond, please be patient (fwd)
  • From: Christian Kujau
• Re: 4.1-rc6: ATA link is slow to respond, please be patient (fwd)
  • From: Christian Kujau
• [PATCH] libata: fix libata-core.c kernel-doc warning
  • From: Randy Dunlap
• Re: 4.1-rc6: ATA link is slow to respond, please be patient
  • From: Michael Ellerman
• NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Andy Smith
• [PATCH] ide: add IDE to libata host drivers conversion table document
  • From: Bartlomiej Zolnierkiewicz
• Re: AMD-Vi IO_PAGE_FAULTs and ata3.00: failed command: READ FPDMA QUEUED errors since Linux 4.0
  • From: Andreas Hartmann
• Re: [PATCH v2] ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  • From: Tejun Heo
• Re: [PATCH v2] ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  • From: Florian Fainelli
• Re: [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Tejun Heo
• [PATCH v2] ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  • From: Axel Lin
• Re: [PATCH RFT] ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  • From: Florian Fainelli
• [PATCH RFT] ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  • From: Axel Lin
• Re: AMD-Vi IO_PAGE_FAULTs and ata3.00: failed command: READ FPDMA QUEUED errors since Linux 4.0
  • From: Andreas Hartmann
• Re: linux: sata_nv: adma support
  • From: Pali Rohár
• Re: AMD-Vi IO_PAGE_FAULTs and ata3.00: failed command: READ FPDMA QUEUED errors since Linux 4.0
  • From: Jeff Moyer
• [PATCH v3] MIPS: Remove all the uses of custom gpio.h
  • From: Alban Bedel
• Re: [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• Re: [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Joe Perches
• Re: [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• Re: [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Hannes Reinecke
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Hannes Reinecke
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: James Bottomley
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: James Bottomley
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• Re: [PATCH libata/for-4.2-fixes] libata: disable NCQ autosense
  • From: Tejun Heo
• Re: [PATCH 0/6] ZAC host-aware device support
  • From: James Bottomley
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• [PATCH libata/for-4.2-fixes] libata: disable NCQ autosense
  • From: Tejun Heo
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• Re: [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Linus Walleij
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Hannes Reinecke
• Re: [PATCH 0/6] ZAC host-aware device support
  • From: Hannes Reinecke
• Re: [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Ralf Baechle
• Re: [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Linus Walleij
• [PATCH] Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• Re: linux: sata_nv: adma support
  • From: Robert Hancock
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Joe Perches
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Joe Perches
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• [PATCH v2] MIPS: Remove all the uses of custom gpio.h
  • From: Alban Bedel
• Re: [PATCH 0/6] ZAC host-aware device support
  • From: James Bottomley
• Re: [PATCH 0/6] ZAC host-aware device support
  • From: Tejun Heo
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• [PATCH] Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• Re: linux: sata_nv: adma support
  • From: Pali Rohár
• Re: linux: sata_nv: adma support
  • From: Robert Hancock
• Re: linux: sata_nv: adma support
  • From: Pali Rohár
• [PATCH 3/6] libata: implement ZBC IN translation
  • From: Hannes Reinecke
• [PATCH 4/6] libata: Implement ZBC OUT translation
  • From: Hannes Reinecke
• [PATCH 6/6] libata: support host-aware ZAC devices
  • From: Hannes Reinecke
• [PATCH 0/6] ZAC host-aware device support
  • From: Hannes Reinecke
• [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Hannes Reinecke
• [PATCH 5/6] libata: support device-managed ZAC devices
  • From: Hannes Reinecke
• [PATCH 2/6] libata-scsi: use ata_scsi_set_sense when generating ATA sense
  • From: Hannes Reinecke
• Re: [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Manuel Lauss
• Re: [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Jonas Gorski
• [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Alban Bedel
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Andreas Hartmann
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Joerg Roedel
• Re: [PATCH 4.2] ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
  • From: Tejun Heo
• Re: [PATCH 4.2] ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
  • From: Florian Fainelli
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Linus Walleij
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Andreas Hartmann
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Andreas Hartmann
• [GIT PULL] libata fixes for v4.2-rc3
  • From: Tejun Heo
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Andreas Hartmann
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Bjorn Helgaas
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Lars-Peter Clausen
• How do the upper layers know a SATA drive has just been plugged in
  • From: Andy Falanga (afalanga)
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Linus Walleij
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Alban
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Manuel Lauss
• [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Alban Bedel
• Re: [PATCH] libata: Do not blacklist M510DC
  • From: Tejun Heo
• [PATCH] libata: Do not blacklist M510DC
  • From: Martin K. Petersen
• Implementing aio cancel for SCSI/SATA devices
  • From: Rajat Jain
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Sergei Shtylyov
• Re: [PATCH] libata: increase the timeout when setting transfer mode
  • From: Tejun Heo
• Re: [PATCH] libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Greg KH
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Greg KH
• [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Arne Fitzenreiter
• [PATCH 0/2] disable trim for SuperSSpeed S238 SSD - v3
  • From: Arne Fitzenreiter
• [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Arne Fitzenreiter
• Re: [PATCH 4.2] ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
  • From: Brian Norris
• Re: [PATCH] libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER
  • From: Tejun Heo
• Re: [PATCH] ata: sata_rcar: Remove obsolete sata-r8a779* platform_device_id entries
  • From: Tejun Heo
• Re: [PATCH] ata: pmp: add quirk for Marvell 4140 SATA PMP
  • From: Tejun Heo
• [PATCH 4.2] ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
  • From: Florian Fainelli
• Re: [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Tejun Heo
• [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Arne Fitzenreiter
• [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Arne Fitzenreiter
• [PATCH 0/2] disable trim for SuperSSpeed S238 SSD - v2
  • From: Arne Fitzenreiter
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: arne_f
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Sergei Shtylyov
• [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Arne Fitzenreiter
• [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Arne Fitzenreiter
• [PATCH 0/2] disable trim for SuperSSpeed S238 SSD
  • From: Arne Fitzenreiter
• Re: [PATCH] libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
  • From: Jeff Moyer
• [PATCH] libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
  • From: David Milburn
• [PATCH] ide: Add helper macro for struct pci_driver bolierplate
  • From: Vaishali Thakkar
• [PATCH] libata: increase the timeout when setting transfer mode
  • From: Mikulas Patocka
• Re: Addresses in PxCLB and PxCLBU
  • From: Andy Falanga (afalanga)
• Re: Addresses in PxCLB and PxCLBU
  • From: Sergei Shtylyov
• Addresses in PxCLB and PxCLBU
  • From: Andy Falanga (afalanga)
• [PATCH] libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER
  • From: Aleksei Mamlin
• [PATCH] ata: pmp: add quirk for Marvell 4140 SATA PMP
  • From: Thomas Petazzoni
• Re: configurable discard parameters
  • From: Tom Yan
• [GIT PULL] libata changes for v4.2-rc1
  • From: Tejun Heo
• Re: configurable discard parameters
  • From: Martin K. Petersen
• Re: failed command: WRITE FPDMA QUEUED, suspiciously on two different disks
  • From: Sami Farin
• Re: configurable discard parameters
  • From: Tom Yan
• Re: failed command: WRITE FPDMA QUEUED, suspiciously on two different disks
  • From: Tim Small
• Re: failed command: WRITE FPDMA QUEUED, suspiciously on two different disks
  • From: Suman Tripathi
• Re: configurable discard parameters
  • From: Martin K. Petersen
• Re: [PATCH] ata: sata_rcar: Remove obsolete sata-r8a779* platform_device_id entries
  • From: Simon Horman
• Re: configurable discard parameters
  • From: Tom Yan
• failed command: WRITE FPDMA QUEUED, suspiciously on two different disks
  • From: Sami Farin
• Re: configurable discard parameters
  • From: Martin K. Petersen
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Martin K. Petersen
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Martin K. Petersen
• Re: configurable discard parameters
  • From: Tom Yan
• [PATCH] ata: sata_rcar: Remove obsolete sata-r8a779* platform_device_id entries
  • From: Geert Uytterhoeven
• Re: configurable discard parameters
  • From: Martin K. Petersen
• how to issue an ATA command
  • From: Andy Falanga (afalanga)
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Martin K. Petersen
• configurable discard parameters
  • From: Tom Yan
• Re: [PATCH] libata: Do not blacklist Micron M500DC
  • From: Tejun Heo
• [PATCH] libata: Do not blacklist Micron M500DC
  • From: Martin K. Petersen
• Re: [PATCH] ata: ahci_mvebu: add suspend/resume support
  • From: Tejun Heo
• Re: [PATCH v2] ahci, msix: Fix build error for !PCI_MSI
  • From: Tejun Heo
• [PATCH v2] ahci, msix: Fix build error for !PCI_MSI
  • From: Robert Richter
• [PATCH] ata: ahci_mvebu: add suspend/resume support
  • From: Thomas Petazzoni
• [PATCH] ahci, msix: Fix build error for !PCI_MSI
  • From: Robert Richter
• Re: [PATCH] ahci, msix: Fix build error for !PCI_MSI
  • From: Jiang Liu
• Re: [PATCH v5 0/2] ahci: Add generic MSI-X support for single interrupts to SATA PCI
  • From: Tejun Heo
• Re: [PATCH 4/4] libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
  • From: Martin K. Petersen
• Re: how to "decode" SG_IO: bad/missing sense data?
  • From: Tom Yan
• Re: [PATCH v5 0/2] ahci: Add generic MSI-X support for single interrupts to SATA PCI
  • From: Robert Richter
• Re: how to "decode" SG_IO: bad/missing sense data?
  • From: Douglas Gilbert
• how to "decode" SG_IO: bad/missing sense data?
  • From: Tom Yan
• Re: [PATCH 4/4] libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
  • From: David Milburn
• Re: [PATCH 4/4] libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
  • From: Martin K. Petersen
• Re: [PATCH 4/4] libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
  • From: David Milburn
• Device unreadable, no SMART errors found
  • From: Andre
• Re: Question about HighPoint RocketRAID 642L SCSI driver conflict with Linux AHCI driver
  • From: One Thousand Gnomes
• Re: [PATCH] libata: finally use __initconst in ata_parse_force_one()
  • From: Tejun Heo
• Re: [PATCH v3 0/2] Support for CEVA SATA Host controller
  • From: Tejun Heo
• Re: [PATCH v3 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Hans de Goede
• [PATCH] libata: finally use __initconst in ata_parse_force_one()
  • From: Rasmus Villemoes
• [PATCH v3 0/2] Support for CEVA SATA Host controller
  • From: Suneel Garapati
• [PATCH v3 1/2] devicetree:bindings: add devicetree bindings for ceva ahci
  • From: Suneel Garapati
• Re: [PATCH v3 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Tejun Heo
• [PATCH v3 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Suneel Garapati
• Re: [PATCH v2 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Hans de Goede
• Re: [PATCH v2 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Tejun Heo
• Re: [PATCH] ahci: added support for Freescale AHCI sata
  • From: Tejun Heo
• Re: [PATCH] pata_octeon_cf: fix broken build
  • From: Tejun Heo
• Re: [GIT PULL] libata fixes for v4.1-rc7
  • From: Tejun Heo
• [PATCH] pata_octeon_cf: fix broken build
  • From: Aaro Koskinen
• [GIT PULL] libata fixes for v4.1-rc7
  • From: Tejun Heo
• [PATCH v5 1/2] ahci: Add generic MSI-X support for single interrupts to SATA PCI driver
  • From: Robert Richter
• [PATCH v5 2/2] ahci: Add support for Cavium's ThunderX host controller
  • From: Robert Richter
• [PATCH v5 0/2] ahci: Add generic MSI-X support for single interrupts to SATA PCI
  • From: Robert Richter
• Re: [PATCH v2 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Michal Simek
• Re: [PATCH v2 1/2] devicetree:bindings: add devicetree bindings for ceva ahci
  • From: Michal Simek
• [PATCH v2 0/2] Support for CEVA SATA Host controller
  • From: Suneel Garapati
• [PATCH v2 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Suneel Garapati
• [PATCH v2 1/2] devicetree:bindings: add devicetree bindings for ceva ahci
  • From: Suneel Garapati
• Re: [PATCH v4 3/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Tejun Heo
• Re: [PATCH v4 3/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• [PATCH] ahci: added support for Freescale AHCI sata
  • From: Yuantian.Tang
• Re: Question about HighPoint RocketRAID 642L SCSI driver conflict with Linux AHCI driver
  • From: Tejun Heo
• Question about HighPoint RocketRAID 642L SCSI driver conflict with Linux AHCI driver
  • From: linux
• Re: [PATCH v4 3/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Tejun Heo
• Re: [PATCH v4 2/3] ahci: Store irq number in struct ahci_host_priv
  • From: Tejun Heo
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Gregory CLEMENT
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Ian Campbell
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Andrew Lunn
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Ian Campbell
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Felipe Balbi
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Kishon Vijay Abraham I
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Ian Campbell
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Andrew Lunn
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Andrew Lunn
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Ian Campbell
• [PATCH v4 3/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• [PATCH v4 1/3] ahci: Move interrupt enablement code to a separate function
  • From: Robert Richter
• [PATCH v4 2/3] ahci: Store irq number in struct ahci_host_priv
  • From: Robert Richter
• [PATCH v4 0/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Ian Campbell
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Felipe Balbi
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Sylwester Nawrocki
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Tejun Heo
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Maxime Coquelin
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Kishon Vijay Abraham I
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Kishon Vijay Abraham I
• Re: imx6 sata cdrom driver issue
  • From: Fabio Estevam
• Re: [PATCH] ahci: Store irq number in struct ahci_host_priv
  • From: Tejun Heo
• Re: [PATCH v3 1/3] ahci: Move interrupt enablement code to separate functions
  • From: Tejun Heo
• [PATCH] ahci: Store irq number in struct ahci_host_priv
  • From: Robert Richter
• Re: [PATCH v3 0/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Tejun Heo
• [PATCH v3 1/3] ahci: Move interrupt enablement code to separate functions
  • From: Robert Richter
• [PATCH v3 2/3] ahci: Store irq number in struct ahci_host_priv
  • From: Robert Richter
• [PATCH v3 3/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• [PATCH v3 0/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• Re: [PATCH] ata:sata_nv - Change 1 to true for bool type variable.
  • From: Tejun Heo
• Re: [PATCH] ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
  • From: Tejun Heo
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Felipe Balbi
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Arun Ramamurthy
• [PATCH] ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
  • From: Gregory CLEMENT
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Felipe Balbi
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Arun Ramamurthy
• [PATCH] ata:sata_nv - Change 1 to true for bool type variable.
  • From: Shailendra Verma
• Re: [PATCH v3 1/5] Documentation: devicetree: add Broadcom SATA binding
  • From: Tejun Heo
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Tejun Heo
• Re: [PATCH 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Paul Bolle
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH v3 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Tejun Heo
• Re: [PATCH v3 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Brian Norris
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Tejun Heo
• Re: [PATCH v3 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Tejun Heo
• Re: [PATCH v3 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Fabio Estevam
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Tejun Heo
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH v3 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Tejun Heo
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Tejun Heo
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Tejun Heo
• Re: [PATCH 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Tejun Heo
• Re: [PATCH] libata: Fix regression when the NCQ Send and Receive log page is absent
  • From: Tejun Heo
• Re: [PATCH] ata: hpt366: fix constant cast warning
  • From: Tejun Heo
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Kishon Vijay Abraham I
• Re: [PATCH v3 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Kishon Vijay Abraham I
• [PATCH 0/2] Support for CEVA SATA Host controller
  • From: Suneel Garapati
• [PATCH 1/2] devicetree:bindings: add devicetree bindings for ceva ahci
  • From: Suneel Garapati
• [PATCH 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Suneel Garapati
• [PATCH v4] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH] libata: Fix regression when the NCQ Send and Receive log page is absent
  • From: Sergei Shtylyov
• Re: [PATCH] ata: hpt366: fix constant cast warning
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] libata: Fix regression when the NCQ Send and Receive log page is absent
  • From: Martin K. Petersen
• Best way to store struct ata_host objects for later use
  • From: Andy Falanga (afalanga)
• RE: imx6 sata cdrom driver issue
  • From: Kevin Groeneveld
• Re: imx6 sata cdrom driver issue
  • From: Jonathan Bagg
• Re: [PATCH v2 0/9] ARM: at91 cleanups for 4.1 #2
  • From: Nicolas Ferre
• [PATCH] ata: hpt366: fix constant cast warning
  • From: Arnd Bergmann
• Re: READ LOG DMA EXT failed, trying unqueued
  • From: Sergey Senozhatsky
• Re: READ LOG DMA EXT failed, trying unqueued
  • From: Sergey Senozhatsky
• Re: READ LOG DMA EXT failed, trying unqueued
  • From: Sergey Senozhatsky
• Re: READ LOG DMA EXT failed, trying unqueued
  • From: Martin K. Petersen
• READ LOG DMA EXT failed, trying unqueued
  • From: Sergey Senozhatsky
• Re: [patch] ata: ahci_xgene: potential NULL dereference in probe
  • From: Tejun Heo
• Re: [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• Re: [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Alexander Gordeev
• [patch] ata: ahci_xgene: potential NULL dereference in probe
  • From: Dan Carpenter
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Felipe Balbi
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Mauro Carvalho Chehab
• Re: [PATCH v3 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Florian Fainelli
• Re: [PATCH v3 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH V2] ahci: Add support for EEH error recovery
  • From: Tejun Heo
• [PATCH V2] ahci: Add support for EEH error recovery
  • From: wenxiong
• Re: [PATCH] ahci: Add support for EEH error recovery
  • From: Brian King
• Re: [PATCH] ahci: Add support for EEH error recovery
  • From: Tejun Heo
• Re: [PATCH] ahci: Add support for EEH error recovery
  • From: Brian King
• Re: [PATCH] ahci: Add support for EEH error recovery
  • From: Tejun Heo
• Re: [PATCH v3 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Kishon Vijay Abraham I
• [PATCH] ahci: Add support for EEH error recovery
  • From: wenxiong
• Re: [PATCH v3 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Tejun Heo
• Re: [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• Re: [PATCH v3 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Florian Fainelli
• Re: [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Tejun Heo
• Re: [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• Re: [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Tejun Heo
• Re: [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Tejun Heo
• Re: [PATCH v3 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Kishon Vijay Abraham I
• [PATCH v3 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Brian Norris
• [PATCH v3 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Brian Norris
• [PATCH v3 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Brian Norris
• [PATCH v3 2/5] Documentation: devicetree: add Broadcom SATA PHY binding
  • From: Brian Norris
• [PATCH v3 1/5] Documentation: devicetree: add Broadcom SATA binding
  • From: Brian Norris
• [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• Re: [PATCH v2 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH 2/3] libata: Add firmware_default LPM policy
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: Add firmware_default LPM policy
  • From: Matthew Garrett
• Re: [PATCH 2/3] libata: Add firmware_default LPM policy
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: Add firmware_default LPM policy
  • From: Matthew Garrett
• Re: [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• [GIT PULL] libata fixes for v4.1-rc3
  • From: Tejun Heo
• Re: [PATCHv3 2/4] phy: core: Add devm_of_phy_get_by_index to phy-core
  • From: Kishon Vijay Abraham I
• Re: [PATCH v2 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Kishon Vijay Abraham I
• Re: [PATCHv3 0/4] add devm_of_phy_get_by_index and update platform drivers
  • From: Kishon Vijay Abraham I
• Re: [PATCH v6 1/1] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Suman Tripathi
• Re: [PATCH v6 1/1] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Tejun Heo
• [PATCH v6 1/1] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Suman Tripathi
• [PATCH v6 0/1] ata: ahci_xgene: Add support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller driver.
  • From: Suman Tripathi
• Re: [PATCH v5 3/3] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Suman Tripathi
• Re: [PATCH v5 3/3] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Tejun Heo
• Re: [PATCH v5 2/3] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Tejun Heo
• Re: [PATCH v2] ahci: avoton port-disable reset-quirk
  • From: Tejun Heo
• Re: imx6 sata cdrom driver issue
  • From: Jonathan Bagg
• [PATCH v2] ahci: avoton port-disable reset-quirk
  • From: Dan Williams
• Re: [PATCH v5 3/3] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Suman Tripathi
• Re: [PATCH v5 2/3] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Suman Tripathi
• Re: [RFC PATCH] ahci: avoton port-disable reset-quirk
  • From: Tejun Heo
• current libata documentation
  • From: Andy Falanga (afalanga)
• [RFC PATCH] ahci: avoton port-disable reset-quirk
  • From: Dan Williams
• Re: [PATCH 1/4] libata: Allow NCQ TRIM to be enabled or disabled with a module parameter
  • From: Martin K. Petersen
• Re: [PATCH 2/4] libata: Expose TRIM capability in sysfs
  • From: Martin K. Petersen
• [PATCH v5 0/3] ata: ahci_xgene: Add support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller driver.
  • From: Suman Tripathi
• [PATCH v5 3/3] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Suman Tripathi
• [PATCH v5 2/3] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Suman Tripathi
• [PATCH v5 1/3] libahci: Refactoring of ahci_single_irq_intr function.
  • From: Suman Tripathi
• Re: [PATCH 2/4] libata: Expose TRIM capability in sysfs
  • From: Christoph Hellwig
• Re: [PATCH v4 1/2] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Suman Tripathi
• [PATCH v4 1/2] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Suman Tripathi
• [PATCH v4 0/2] ata: ahci_xgene: Add support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller driver.
  • From: Suman Tripathi
• [PATCH v4 2/2] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Suman Tripathi
• Re: [PATCH v4 1/2] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Tejun Heo
• Re: [PATCH 1/4] libata: Allow NCQ TRIM to be enabled or disabled with a module parameter
  • From: Hannes Reinecke
• Re: [PATCH 1/1] ata: select DW_DMAC in case of SATA_DWC
  • From: Tejun Heo
• Re: [PATCH 1/4] libata: Allow NCQ TRIM to be enabled or disabled with a module parameter
  • From: Tejun Heo
• Re: [PATCH v3 1/2] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Tejun Heo
• Re: [PATCH 1/1] ata: select DW_DMAC in case of SATA_DWC
  • From: Julian Margetson
• Re: imx6 sata cdrom driver issue
  • From: Arnd Bergmann
• [PATCH 1/1] ata: select DW_DMAC in case of SATA_DWC
  • From: Andy Shevchenko
• Re: [PATCH 4/4] libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
  • From: Hannes Reinecke
• Re: [PATCH 3/4] libata: READ LOG DMA EXT support can be in either page 119 or 120
  • From: Hannes Reinecke
• Re: [PATCH v3 1/2] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Suman Tripathi
• Re: [PATCH 2/4] libata: Expose TRIM capability in sysfs
  • From: Hannes Reinecke
• Re: [PATCH 1/4] libata: Allow NCQ TRIM to be enabled or disabled with a module parameter
  • From: Hannes Reinecke
• [PATCH 4/4] libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
  • From: Martin K. Petersen
• [PATCH 3/4] libata: READ LOG DMA EXT support can be in either page 119 or 120
  • From: Martin K. Petersen
• [PATCH 2/4] libata: Expose TRIM capability in sysfs
  • From: Martin K. Petersen
• [PATCH 1/4] libata: Allow NCQ TRIM to be enabled or disabled with a module parameter
  • From: Martin K. Petersen
• Re: imx6 sata cdrom driver issue
  • From: Jonathan Bagg
• Re: imx6 sata cdrom driver issue
  • From: Arnd Bergmann
• Re: [PATCH v3 1/2] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Tejun Heo
• Re: Please help me to understand the interaction of the various ATA drivers
  • From: Andy Falanga (afalanga)
• Re: Samsung 840 EVO
  • From: Martin K. Petersen
• Re: [PATCH v3 1/2] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Suman Tripathi
• Re: Samsung 840 EVO
  • From: Günter Waller
• Re: Samsung 840 EVO
  • From: Martin K. Petersen
• Re: [PATCH] libata: Blacklist queued TRIM on all Samsung 800-series
  • From: Tejun Heo
• Re: Samsung 840 EVO
  • From: Sven Köhler
• Re: Samsung 840 EVO
  • From: Martin K. Petersen
• Re: Samsung 840 EVO
  • From: Martin K. Petersen
• [PATCH] libata: Blacklist queued TRIM on all Samsung 800-series
  • From: Martin K. Petersen
• Re: Samsung 840 EVO
  • From: Günter Waller
• Re: imx6 sata cdrom driver issue
  • From: Jonathan Bagg
• Re: [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Tejun Heo
• Re: Samsung 840 EVO
  • From: Sven Köhler
• Re: Samsung 840 EVO
  • From: Sven Köhler
• Re: [PATCH v3 1/2] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Tejun Heo
• Re: Samsung 840 EVO
  • From: Martin K. Petersen
• Re: [PATCH v3 1/2] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Sergei Shtylyov
• Samsung 840 EVO
  • From: Günter Waller
• [PATCH v2] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• Re: [PATCH v3 2/2] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Suman Tripathi
• Re: [PATCH v3 2/2] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Julian Calaby
• Re: [PATCH v3 2/2] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Suman Tripathi
• Re: [PATCH v3 2/2] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Julian Calaby
• [PATCH v3 2/2] ata: ahci_xgene: Add AHCI Support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller.
  • From: Suman Tripathi
• [PATCH v3 1/2] libahci: Add support to handle HOST_IRQ_STAT as edge trigger latch.
  • From: Suman Tripathi
• [PATCH v3 0/2] ata: ahci_xgene: Add support for 2nd HW version of APM X-Gene SoC AHCI SATA Host controller driver.
  • From: Suman Tripathi
• Re: [PATCH] libata: samsung_cf: Constify platform_device_id
  • From: Tejun Heo
• Re: printouts about removable disk in the kernel log
  • From: Alexey Orishko
• [PATCH] libata: samsung_cf: Constify platform_device_id
  • From: Krzysztof Kozlowski
• Re: SATA hdd refuses to reallocate a sector?
  • From: Pavel Machek
• Re: Please help me to understand the interaction of the various ATA drivers
  • From: Christoph Hellwig
• Re: Please help me to understand the interaction of the various ATA drivers
  • From: Andy Falanga (afalanga)
• Re: [PATCH 2/3] ARM: DT: STi: STiH407: Add sata DT nodes.
  • From: Maxime Coquelin
• Re: Please help me to understand the interaction of the various ATA drivers
  • From: One Thousand Gnomes
• Re: printouts about removable disk in the kernel log
  • From: Tim Small
• Re: [PATCH v2 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Arnd Bergmann
• Re: Please help me to understand the interaction of the various ATA drivers
  • From: Hendrik Visage
• Please help me to understand the interaction of the various ATA drivers
  • From: Andy Falanga (afalanga)
• Re: [PATCH v2] ata: ahci_st: fixup layering violations / drvdata errors
  • From: Maxime Coquelin
• Re: [PATCH v2 3/9] mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  • From: Lee Jones
• printouts about removable disk in the kernel log
  • From: Alexey Orishko
• [V9 PATCH 0/3] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulpanit
• [V9 PATCH 3/3] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suravee Suthikulpanit
• [V9 PATCH 2/3] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• [V9 PATCH 1/3] ACPICA: Utilities: Add _CLS processing
  • From: Suravee Suthikulpanit
• Re: [PATCH v2 3/9] mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  • From: Alexandre Belloni
• Re: [PATCH v2 3/9] mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  • From: Lee Jones
• Re: [V8 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Suravee Suthikulpanit
• Re: [PATCH v2 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Brian Norris
• Re: [V8 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Rafael J. Wysocki
• Re: [V8 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Suthikulpanit, Suravee
• [PATCH] Ata: ahci: reindent
  • From: Silvan Wicki
• Re: [PATCH v2 2/2] libata: Ignore spurious PHY event on LPM policy change
  • From: Tejun Heo
• Re: [PATCH v2 1/2] libata: Add helper to determine when PHY events should be ignored
  • From: Tejun Heo
• [PATCH v2 2/2] libata: Ignore spurious PHY event on LPM policy change
  • From: Gabriele Mazzotta
• [PATCH v2 1/2] libata: Add helper to determine when PHY events should be ignored
  • From: Gabriele Mazzotta
• [PATCH v2 0/2] libata: Ignore spurious PHY event on LPM policy change
  • From: Gabriele Mazzotta
• Re: [PATCH] libata: Ignore spurious PHY events on LPM policy change
  • From: Gabriele Mazzotta
• Re: [PATCH] libata: Ignore spurious PHY events on LPM policy change
  • From: Tejun Heo
• [PATCH] libata: Ignore spurious PHY events on LPM policy change
  • From: Gabriele Mazzotta
• Re: [V8 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Rafael J. Wysocki
• Re: SATA link power management issues
  • From: Tejun Heo
• Re: [V8 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Suravee Suthikulpanit
• Re: [V8 PATCH 0/3] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulpanit
• Re: imx6 sata cdrom driver issue
  • From: Arnd Bergmann
• Re: [PATCH v2 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Arnd Bergmann
• Re: [PATCH v2 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Brian Norris
• Re: [V8 PATCH 0/3] Introduce ACPI support for ahci_platform driver
  • From: Rafael J. Wysocki
• Re: [V8 PATCH 0/3] Introduce ACPI support for ahci_platform driver
  • From: Suthikulpanit, Suravee
• imx6 sata cdrom driver issue
  • From: Jonathan Bagg
• Re: [PATCHv3 0/4] add devm_of_phy_get_by_index and update platform drivers
  • From: Alan Stern
• Re: [PATCH v2 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Arnd Bergmann
• Re: [PATCHv3 0/4] add devm_of_phy_get_by_index and update platform drivers
  • From: Hans de Goede
• [PATCH v2 5/5] ARM: dts: brcmstb: add nodes for SATA controller and PHY
  • From: Brian Norris
• [PATCH v2 1/5] Documentation: devicetree: add Broadcom SATA binding
  • From: Brian Norris
• [PATCH v2 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Brian Norris
• [PATCH v2 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Brian Norris
• [PATCH v2 2/5] Documentation: devicetree: add Broadcom SATA PHY binding
  • From: Brian Norris
• [PATCH v2 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH v2] ata: ahci_st: fixup layering violations / drvdata errors
  • From: Brian Norris
• [PATCHv3 2/4] phy: core: Add devm_of_phy_get_by_index to phy-core
  • From: Arun Ramamurthy
• [PATCHv3 3/4] usb: ehci-platform: Use devm_of_phy_get_by_index
  • From: Arun Ramamurthy
• [PATCHv3 4/4] usb: ohci-platform: Use devm_of_phy_get_by_index
  • From: Arun Ramamurthy
• [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Arun Ramamurthy
• [PATCHv3 0/4] add devm_of_phy_get_by_index and update platform drivers
  • From: Arun Ramamurthy
• Re: [PATCH 3/3] libata: Change medium_power LPM policy to match Intel recommendations
  • From: Tejun Heo
• Re: [PATCH 2/3] libata: Add firmware_default LPM policy
  • From: Tejun Heo
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• Re: [PATCH 1/3] libata: Stash initial power management configuration
  • From: Tejun Heo
• Re: SATA link power management issues
  • From: Tejun Heo
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• Re: SATA link power management issues
  • From: Tejun Heo
• Re: Sporadic timeouts accessing shingled drives with 3.19.
  • From: Jason L Tibbitts III
• Re: Sporadic timeouts accessing shingled drives with 3.19.
  • From: Adrian Palmer
• Sporadic timeouts accessing shingled drives with 3.19.
  • From: Jason L Tibbitts III
• Re: SATA link power management issues
  • From: Gabriele Mazzotta
• [PATCH v2] ata: ahci_st: fixup layering violations / drvdata errors
  • From: Peter Griffin
• [PATCH v2] ata: ahci_st: fixup layering violations / drvdata errors
  • From: Peter Griffin
• Re: [PATCH] ata: ahci_st: fixup layering violations / drvdata errors
  • From: Peter Griffin
• [PATCH 1/3] libata: Stash initial power management configuration
  • From: Matthew Garrett
• [PATCH 2/3] libata: Add firmware_default LPM policy
  • From: Matthew Garrett
• [PATCH 3/3] libata: Change medium_power LPM policy to match Intel recommendations
  • From: Matthew Garrett
• Rework AHCI LPM handling a little
  • From: Matthew Garrett
• [GIT] IDE
  • From: David Miller
• Re: ahci Port to Host interrupt as edge trigger
  • From: Suman Tripathi
• Re: [PATCH] ata: ahci_st: fixup layering violations / drvdata errors
  • From: Tejun Heo
• Re: ahci Port to Host interrupt as edge trigger
  • From: Tejun Heo
• ahci Port to Host interrupt as edge trigger
  • From: Suman Tripathi
• RE: [V8 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Moore, Robert
• RE: [V8 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Zheng, Lv
• Re: [PATCH] resolve collision of generic ATA_FLAG_LOWTAG and driver specific flag
  • From: Ronny Hegewald
• Re: [PATCH 2/3] Remove celleb-only SCC PATA drivers
  • From: Tejun Heo
• Re: [PATCH v2 2/3] Remove celleb-only SCC PATA drivers
  • From: Tejun Heo
• Re: [PATCH v2 2/3] Remove celleb-only SCC PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH v2 2/3] Remove celleb-only SCC PATA drivers
  • From: Daniel Axtens
• [PATCH 2/3] Remove celleb-only SCC PATA drivers
  • From: Daniel Axtens
• Re: [PATCH] libata: Add an additional LPM policy to match Intel recommendations
  • From: Tejun Heo
• Re: [PATCH] libata: Add an additional LPM policy to match Intel recommendations
  • From: Matthew Garrett
• Re: [PATCH 1/2] ide: remove deprecated use of pci api
  • From: David Miller
• Re: [PATCH 1/2] ide: remove deprecated use of pci api
  • From: Dan Carpenter
• Re: [PATCH 1/2] ide: remove deprecated use of pci api
  • From: David Miller
• Re: [PATCH v2 1/1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Arnd Bergmann
• [GIT PULL] libata changes for 4.1-rc1
  • From: Tejun Heo
• Re: [PATCH] resolve collision of generic ATA_FLAG_LOWTAG and driver specific flag
  • From: Tejun Heo
• Re: [PATCH] libata: Add an additional LPM policy to match Intel recommendations
  • From: Tejun Heo
• Re: [V8 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Rafael J. Wysocki
• Re: [PATCH 1/2] ide: remove deprecated use of pci api
  • From: One Thousand Gnomes
• Re: [PATCH v2] ide: remove deprecated use of pci api
  • From: Dan Carpenter
• [PATCH v2 1/1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Suman Tripathi
• [PATCH v2 0/1] ata: ahci_xgene: Enable native NCQ and FBS for second generation of X-Gene SoC.
  • From: Suman Tripathi
• [PATCH v2] ide: remove deprecated use of pci api
  • From: Quentin Lambert
• [PATCH] libata: Add an additional LPM policy to match Intel recommendations
  • From: Matthew Garrett
• Re: [PATCH] resolve collision of generic ATA_FLAG_LOWTAG and driver specific flag
  • From: Sergei Shtylyov
• Re: [PATCH] resolve collision of generic ATA_FLAG_LOWTAG and driver specific flag
  • From: Sergei Shtylyov
• Re: [PATCH] resolve collision of generic ATA_FLAG_LOWTAG and driver specific flag
  • From: Christoph Hellwig
• [PATCH] resolve collision of generic ATA_FLAG_LOWTAG and driver specific flag
  • From: Ronny Hegewald
• Re: [PATCH] ata: ahci_st: fixup layering violations / drvdata errors
  • From: Brian Norris
• Re: [PATCH 2/2] ide: replace GFP_ATOMIC by GFP_KERNEL
  • From: Dan Carpenter
• Re: [PATCH 2/2] ide: replace GFP_ATOMIC by GFP_KERNEL
  • From: Julia Lawall
• Re: [PATCH 2/2] ide: replace GFP_ATOMIC by GFP_KERNEL
  • From: Quentin Lambert
• Re: [PATCH 2/2] ide: replace GFP_ATOMIC by GFP_KERNEL
  • From: Dan Carpenter
• Re: [PATCH 2/2] ide: replace GFP_ATOMIC by GFP_KERNEL
  • From: Dan Carpenter
• Re: [PATCH 2/2] ide: replace GFP_ATOMIC by GFP_KERNEL
  • From: Quentin Lambert
• Re: [PATCH 2/2] ide: replace GFP_ATOMIC by GFP_KERNEL
  • From: Dan Carpenter
• Re: [PATCH 1/2] ide: remove deprecated use of pci api
  • From: Dan Carpenter
• [PATCH 2/2] ide: replace GFP_ATOMIC by GFP_KERNEL
  • From: Quentin Lambert
• [PATCH 1/2] ide: remove deprecated use of pci api
  • From: Quentin Lambert
• [PATCH 0/2] pci to dma
  • From: Quentin Lambert
• Re: [PATCH] ata: ahci_st: fixup layering violations / drvdata errors
  • From: Peter Griffin
• Re: [PATCH] ata: ahci_st: fixup layering violations / drvdata errors
  • From: Sergei Shtylyov
• Re: [PATCH] ata: ahci_st: fixup layering violations / drvdata errors
  • From: Maxime Coquelin
• [PATCH] ata: ahci_st: fixup layering violations / drvdata errors
  • From: Brian Norris
• Re: [PATCH] libata: Fix division by zero
  • From: One Thousand Gnomes
• Re: [PATCH] ata: remove deprecated use of pci api
  • From: Tejun Heo
• Re: [PATCH] libata: Fix division by zero
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: Fix division by zero
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2 1/9] ata: at91: use syscon to configure the smc
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] libata: Fix division by zero
  • From: Alan
• [PATCH] ata: remove deprecated use of pci api
  • From: Quentin Lambert
• Re: [PATCH v2 1/9] ata: at91: use syscon to configure the smc
  • From: Nicolas Ferre
• Re: [PATCH v2 1/9] ata: at91: use syscon to configure the smc
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2 1/9] ata: at91: use syscon to configure the smc
  • From: Alexandre Belloni
• Re: [PATCH v2 1/9] ata: at91: use syscon to configure the smc
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Kishon Vijay Abraham I
• Re: [PATCH 16/25] include/linux: Use bool function return values of true/false not 1/0
  • From: Sebastian Reichel
• Re: [V8 PATCH 0/3] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulanit
• Re: [PATCH 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH v1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Mark Rutland
• Re: [PATCH v1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Catalin Marinas
• Re: [PATCH v1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Russell King - ARM Linux
• Re: [PATCH v1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Mark Rutland
• Re: [PATCH v1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Catalin Marinas
• Re: [PATCH v1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Tejun Heo
• Re: [PATCH v1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Russell King - ARM Linux
• Re: [PATCH v1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Suman Tripathi
• Re: [PATCH v1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Tejun Heo
• Re: [PATCH v1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Tejun Heo
• Re: [PATCH 3/3] ahci: st: st_configure_oob must be called after IP is clocked.
  • From: Tejun Heo
• [PATCH v1] ata: ahci_xgene: Add AHCI Support for second generation of APM X-Gene SoC
  • From: Suman Tripathi
• [PATCH v1] ata: ahci_xgene: Enable native NCQ and FBS for second generation of X-Gene SoC.
  • From: Suman Tripathi
• Re: [PATCH 3/3] ahci: st: st_configure_oob must be called after IP is clocked.
  • From: Peter Griffin
• Re: [PATCH 4/9] ide,ata: Rename ATA_IDX to ATA_SENSE
  • From: David Miller
• Re: [PATCH 3/3] ahci: st: st_configure_oob must be called after IP is clocked.
  • From: Tejun Heo
• Re: [PATCH 3/3] ahci: st: st_configure_oob must be called after IP is clocked.
  • From: Peter Griffin
• Re: [PATCH 3/3] ahci: st: st_configure_oob must be called after IP is clocked.
  • From: Maxime Coquelin
• Re: [PATCH 3/3] ahci: st: st_configure_oob must be called after IP is clocked.
  • From: Tejun Heo
• Re: [PATCH 3/3] libata: support host-aware ZAC devices
  • From: One Thousand Gnomes
• [PATCH 1/3] libata: implement ZBC IN translation
  • From: Hannes Reinecke
• [PATCH 2/3] libata: Implement ZBC OUT translation
  • From: Hannes Reinecke
• [PATCH 3/3] libata: support host-aware ZAC devices
  • From: Hannes Reinecke
• [PATCH 0/3] libata: ZAC SATL implementation
  • From: Hannes Reinecke
• Re: [PATCH 16/25] include/linux: Use bool function return values of true/false not 1/0
  • From: Lee Jones
• [PATCH 3/3] ahci: st: st_configure_oob must be called after IP is clocked.
  • From: Peter Griffin
• [PATCH 2/3] ARM: DT: STi: STiH407: Add sata DT nodes.
  • From: Peter Griffin
• [PATCH 1/3] ahci: st: Update the ahci_st DT documentation
  • From: Peter Griffin
• [PATCH RESEND 0/3] Enable ahci_st for stih407 and fix hang
  • From: Peter Griffin
• Re: [PATCH] sata_mv: Manage SATA port multiplier while searching for active links
  • From: Gregory CLEMENT
• Re: [PATCH 4/5] phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
  • From: Kishon Vijay Abraham I
• Re: [PATCH 00/25] treewide: Use bool function return values of true/false not 1/0
  • From: Joe Perches
• Re: [PATCH 00/25] treewide: Use bool function return values of true/false not 1/0
  • From: Casey Schaufler
• [PATCH 16/25] include/linux: Use bool function return values of true/false not 1/0
  • From: Joe Perches
• [PATCH 00/25] treewide: Use bool function return values of true/false not 1/0
  • From: Joe Perches
• [V8 PATCH 0/3] Introduce ACPI support for ahci_platform driver
  • From: Suravee Suthikulpanit
• [V8 PATCH 2/3] ACPI / scan: Add support for ACPI _CLS device matching
  • From: Suravee Suthikulpanit
• [V8 PATCH 3/3] ata: ahci_platform: Add ACPI _CLS matching
  • From: Suravee Suthikulpanit
• [V8 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Suravee Suthikulpanit
• Re: [PATCH] sata_mv: Manage SATA port multiplier while searching for active links
  • From: Tejun Heo
• [PATCH] sata_mv: Manage SATA port multiplier while searching for active links
  • From: Gregory CLEMENT
• [GIT PULL] libata fixes for v4.0-rc6
  • From: Tejun Heo
• Re: [patch] sata_dwc_460ex: indent an if statement
  • From: Tejun Heo
• RE: [V7 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Moore, Robert
• Re: [V7 PATCH 1/3] ACPICA: Add ACPI _CLS processing
  • From: Suravee Suthikulanit
• Re: [patch] sata_dwc_460ex: indent an if statement
  • From: Andy Shevchenko