Hi,
On Thursday 23 April 2015 08:29 AM, Brian Norris wrote:
Hi,
Here are my updates based on everyone's feedback. I'll try to include most of
the changelog info in each patch, but a few summary points for v1 -> v2:
- reworked the PHY DT binding so that we don't need do any custom xlate in the
PHY driver
- moved all handling of the 'SATA_TOP_CTRL' block into the SATA driver,
instead of sharing it between SATA and PHY drivers. This means we have to do
a little extra work in sata_brcmstb.c to decide which ports to power on, but
at least this way, we're really describing the hardware, not just how the SW
frameworks want to use the hardware.
I don't see any problems with the PHY patches. Let me know If I can take this
via linux-phy tree.
Cheers
Kishon
Enjoy,
Brian
Brian Norris (5):
Documentation: devicetree: add Broadcom SATA binding
Documentation: devicetree: add Broadcom SATA PHY binding
ata: add Broadcom AHCI SATA3 driver for STB chips
phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
ARM: dts: brcmstb: add nodes for SATA controller and PHY
.../devicetree/bindings/ata/brcm,sata-brcmstb.txt | 35 +++
.../bindings/phy/brcm,brcmstb-sata-phy.txt | 40 +++
arch/arm/boot/dts/bcm7445.dtsi | 37 +++
drivers/ata/Kconfig | 9 +
drivers/ata/Makefile | 1 +
drivers/ata/sata_brcmstb.c | 285 +++++++++++++++++++++
drivers/phy/Kconfig | 9 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-brcmstb-sata.c | 216 ++++++++++++++++
9 files changed, 632 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
create mode 100644 drivers/ata/sata_brcmstb.c
create mode 100644 drivers/phy/phy-brcmstb-sata.c
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
