Hi, Here are my updates based on everyone's feedback. I'll try to include most of the changelog info in each patch, but a few summary points for v1 -> v2: - reworked the PHY DT binding so that we don't need do any custom xlate in the PHY driver - moved all handling of the 'SATA_TOP_CTRL' block into the SATA driver, instead of sharing it between SATA and PHY drivers. This means we have to do a little extra work in sata_brcmstb.c to decide which ports to power on, but at least this way, we're really describing the hardware, not just how the SW frameworks want to use the hardware. Enjoy, Brian Brian Norris (5): Documentation: devicetree: add Broadcom SATA binding Documentation: devicetree: add Broadcom SATA PHY binding ata: add Broadcom AHCI SATA3 driver for STB chips phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs ARM: dts: brcmstb: add nodes for SATA controller and PHY .../devicetree/bindings/ata/brcm,sata-brcmstb.txt | 35 +++ .../bindings/phy/brcm,brcmstb-sata-phy.txt | 40 +++ arch/arm/boot/dts/bcm7445.dtsi | 37 +++ drivers/ata/Kconfig | 9 + drivers/ata/Makefile | 1 + drivers/ata/sata_brcmstb.c | 285 +++++++++++++++++++++ drivers/phy/Kconfig | 9 + drivers/phy/Makefile | 1 + drivers/phy/phy-brcmstb-sata.c | 216 ++++++++++++++++ 9 files changed, 632 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt create mode 100644 drivers/ata/sata_brcmstb.c create mode 100644 drivers/phy/phy-brcmstb-sata.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
