IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts s3c2410_defconfig to use libata PATA drivers. Cc: Kukjin Kim <kgene@xxxxxxxxxx> Cc: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> Cc: linux-samsung-soc@xxxxxxxxxxxxxxx Cc: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx> Cc: Vincent Sanders <vince@xxxxxxxxxxxx> Cc: Simtec Linux Team <linux@xxxxxxxxxxxx> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx> --- Build tested only. If you have affected hardware please test. Thank you. arch/arm/configs/s3c2410_defconfig | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f314236..f44fa09 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -220,20 +220,16 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_ATA_OVER_ETH=m -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_PLATFORM=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_DM9000=y CONFIG_INPUT_EVDEV=y -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
