The variable spd0 might be used uninitialized when pdc20621_i2c_read() fails. This also generates a compilation warning with gcc 5.1. Signed-off-by: Tomer Barletz <barletz@xxxxxxxxx> --- drivers/ata/sata_sx4.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 3a18a8a..bed311b 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -1238,8 +1238,11 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host) readl(mmio + PDC_SDRAM_CONTROL); /* Turn on for ECC */ - pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); + if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0)) { + printk(KERN_ERR "Failed in i2c read: device=0x%d, subaddr=0x%d\n", PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE); + return 1; + } if (spd0 == 0x02) { data |= (0x01 << 16); writel(data, mmio + PDC_SDRAM_CONTROL); @@ -1380,8 +1383,11 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host) /* ECC initiliazation. */ - pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); + if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0)) { + printk(KERN_ERR "Failed in i2c read: device=0x%d, subaddr=0x%d\n", PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE); + return 1; + } if (spd0 == 0x02) { void *buf; VPRINTK("Start ECC initialization\n"); -- 2.4.3 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html