Hello.
On 8/2/2015 1:12 PM, Tomer Barletz wrote:
The variable spd0 might be used uninitialized when pdc20621_i2c_read()
fails.
This also generates a compilation warning with gcc 5.1.
Signed-off-by: Tomer Barletz <barletz@xxxxxxxxx>
---
drivers/ata/sata_sx4.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 3a18a8a..bed311b 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -1238,8 +1238,11 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host)
readl(mmio + PDC_SDRAM_CONTROL);
/* Turn on for ECC */
- pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
- PDC_DIMM_SPD_TYPE, &spd0);
+ if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+ PDC_DIMM_SPD_TYPE, &spd0)) {
+ printk(KERN_ERR "Failed in i2c read: device=0x%d, subaddr=0x%d\n", PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
Please use pr_err() instead. And "0x%d" makes no sense at all, please use
"%#x" instead.
[...]
@@ -1380,8 +1383,11 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
/* ECC initiliazation. */
- pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
- PDC_DIMM_SPD_TYPE, &spd0);
+ if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+ PDC_DIMM_SPD_TYPE, &spd0)) {
+ printk(KERN_ERR "Failed in i2c read: device=0x%d, subaddr=0x%d\n", PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
Likewise.
MNR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
