On Tue, Aug 25, 2015 at 6:58 AM, Pali Rohár <pali.rohar@xxxxxxxxx> wrote: > On Tuesday 25 August 2015 07:20:05 Mark Lord wrote: >> On 15-08-01 09:45 PM, Robert Hancock wrote: >> >On Sat, Aug 1, 2015 at 2:09 PM, Pali Rohár <pali.rohar@xxxxxxxxx> wrote: >> >>On Thursday 25 December 2014 07:22:13 Robert Hancock wrote: >> >>>On Tue, Dec 23, 2014 at 1:51 PM, Pali Rohár <pali.rohar@xxxxxxxxx> >> >>>wrote: >> >>>>Hello, >> >>>> >> >>>>I have nvidia nforce4 motherboard with nvidia sata controller: >> .. >> >>>It looks like something is trying to issue a command to disable APM >> >>>power management on the drive, and the command fails (likely because >> >>>it doesn't support that command). >> .. >> >> /sbin/hdparm -B254 $DRIVE >> >> >> >>And that -B254 cause above error message in dmesg log. Output from >> >>hdparm is: >> >> >> >> /dev/sda: >> >> setting Advanced Power Management level to 0xfe (254) >> >> APM_level = not supported >> .. >> >> $ sudo hdparm -I /dev/sda | grep -i power >> >> * Power Management feature set >> >> That's not the same as APM ("Advanced" Power Management). >> >> >However, these NVIDIA SATAs are black boxes, and rather buggy ones at that, >> >so it's possible there's an unknown issue there. >> >> I wonder if NVIDIA simply bought out the IP from Pacific Digital >> when they went bust? Pacific Digital invented the original "ADMA", >> and the pdc_adma.c driver in the kernel knows all about it. >> If the IP is pretty similar (identical?) then we could probably >> improve things. >> > > Can you check if nvidia ADMA code and that Pacific Digital ADMA code is > similar or not? The ADMA spec that Pacific Digital adapter (somewhat) implements was documented in a standard, T13 1510D, ATA/ATAPI Host Adapters Standard. My guess is that is where NVIDIA got the ideas for this controller setup. I would be fairly surprised if the controller actually contained any Pacific Digital IP, as the NVIDIA controllers are quite different (the original ADMA spec didn't envision SATA, NCQ or 64-bit DMA while the NVIDIA controllers support these for example). Even if there is some shared IP, the issues with these controllers seem to be more controller bugs than issues with how the controller is being used. In fact, the later NVIDIA Windows drivers suspiciously removed all references to NCQ support in the control panel, which suggests that maybe even they gave up on it. Even if you don't use any ADMA features at all (even when using the default Microsoft IDE driver in Windows), the error handling is very shaky - things like disc read errors on an optical drive connected to the controller will sometimes hard-lock the machine. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html