I have
ata10.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: WDC WD6401AALS-00E8B0, 05.00K05, max UDMA/133
ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-8: WDC WD6401AALS-00E8B0, 05.00K05, max UDMA/133
ata4.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
all are LUKS-encrypted, no LVM, XFS, ata10 is root fs.
Asus P8Z68-V PRO GEN3 mobo. Fedora 22 and device-mapper 1.02.93-3.fc22
was installed ten days ago..
Ten days ago I booted 4.0.5 kernel and when mounting it I started getting
the following errors [1], device ata4.
xfs_repair cleared log and reported no other errors, and I was able to mount
it. Today I booted to 4.0.6 because I installed one PCI card, and
I got identical errors happening on device ata3 now! [2] (LUKS name was
also different so the ata devices did not just switch places.)
lspci in [3]
Troublesome sector around 625228244 in both devices.
SMART does not show problems and disks are working OK, but I have not
ran tests recently..
[1]
[ 244.984949] XFS (dm-1): Mounting V4 Filesystem
[ 245.141528] XFS (dm-1): Ending clean mount
[ 245.752941] XFS (dm-2): Mounting V4 Filesystem
[ 245.881053] ata4.00: exception Emask 0x60 SAct 0xe SErr 0x800 action 0x6 frozen
[ 245.881056] ata4.00: irq_stat 0x20000000, host bus error
[ 245.881058] ata4: SError: { HostInt }
[ 245.881060] ata4.00: failed command: WRITE FPDMA QUEUED
[ 245.881063] ata4.00: cmd 61/40:08:d4:39:44/05:00:25:00:00/40 tag 1 ncq 688128 out
res 40/00:1c:3c:45:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 245.881065] ata4.00: status: { DRDY }
[ 245.881066] ata4.00: failed command: WRITE FPDMA QUEUED
[ 245.881068] ata4.00: cmd 61/28:10:14:3f:44/06:00:25:00:00/40 tag 2 ncq 806912 out
res 40/00:1c:3c:45:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 245.881070] ata4.00: status: { DRDY }
[ 245.881071] ata4.00: failed command: WRITE FPDMA QUEUED
[ 245.881073] ata4.00: cmd 61/98:18:3c:45:44/04:00:25:00:00/40 tag 3 ncq 602112 out
res 40/00:1c:3c:45:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 245.881075] ata4.00: status: { DRDY }
[ 245.881077] ata4: hard resetting link
[ 246.186861] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 246.187479] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 246.187484] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 246.188309] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 246.188313] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 246.188491] ata4.00: configured for UDMA/133
[ 246.188505] ata4: EH complete
[ 246.202856] ata4.00: exception Emask 0x60 SAct 0xe0 SErr 0x800 action 0x6 frozen
[ 246.202858] ata4.00: irq_stat 0x20000000, host bus error
[ 246.202860] ata4: SError: { HostInt }
[ 246.202862] ata4.00: failed command: WRITE FPDMA QUEUED
[ 246.202865] ata4.00: cmd 61/98:28:3c:45:44/04:00:25:00:00/40 tag 5 ncq 602112 out
res 40/00:3c:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 246.202866] ata4.00: status: { DRDY }
[ 246.202868] ata4.00: failed command: WRITE FPDMA QUEUED
[ 246.202870] ata4.00: cmd 61/28:30:14:3f:44/06:00:25:00:00/40 tag 6 ncq 806912 out
res 40/00:3c:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 246.202872] ata4.00: status: { DRDY }
[ 246.202873] ata4.00: failed command: WRITE FPDMA QUEUED
[ 246.202875] ata4.00: cmd 61/40:38:d4:39:44/05:00:25:00:00/40 tag 7 ncq 688128 out
res 40/00:3c:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 246.202876] ata4.00: status: { DRDY }
[ 246.202879] ata4: hard resetting link
[ 246.507670] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 246.508290] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 246.508295] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 246.510057] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 246.510061] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 246.510240] ata4.00: configured for UDMA/133
[ 246.510253] ata4: EH complete
[ 246.525663] ata4.00: exception Emask 0x60 SAct 0x1c0000 SErr 0x800 action 0x6 frozen
[ 246.525665] ata4.00: irq_stat 0x20000000, host bus error
[ 246.525666] ata4: SError: { HostInt }
[ 246.525668] ata4.00: failed command: WRITE FPDMA QUEUED
[ 246.525671] ata4.00: cmd 61/40:90:d4:39:44/05:00:25:00:00/40 tag 18 ncq 688128 out
res 40/00:a4:3c:45:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 246.525673] ata4.00: status: { DRDY }
[ 246.525674] ata4.00: failed command: WRITE FPDMA QUEUED
[ 246.525677] ata4.00: cmd 61/28:98:14:3f:44/06:00:25:00:00/40 tag 19 ncq 806912 out
res 40/00:a4:3c:45:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 246.525678] ata4.00: status: { DRDY }
[ 246.525679] ata4.00: failed command: WRITE FPDMA QUEUED
[ 246.525682] ata4.00: cmd 61/98:a0:3c:45:44/04:00:25:00:00/40 tag 20 ncq 602112 out
res 40/00:a4:3c:45:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 246.525683] ata4.00: status: { DRDY }
[ 246.525685] ata4: hard resetting link
[ 246.830481] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 246.831090] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 246.831095] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 246.831913] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 246.831917] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 246.832092] ata4.00: configured for UDMA/133
[ 246.832105] ata4: EH complete
[ 246.846469] ata4.00: exception Emask 0x60 SAct 0x7 SErr 0x800 action 0x6 frozen
[ 246.846471] ata4.00: irq_stat 0x20000000, host bus error
[ 246.846473] ata4: SError: { HostInt }
[ 246.846474] ata4.00: failed command: WRITE FPDMA QUEUED
[ 246.846477] ata4.00: cmd 61/98:00:3c:45:44/04:00:25:00:00/40 tag 0 ncq 602112 out
res 40/00:14:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 246.846479] ata4.00: status: { DRDY }
[ 246.846480] ata4.00: failed command: WRITE FPDMA QUEUED
[ 246.846482] ata4.00: cmd 61/28:08:14:3f:44/06:00:25:00:00/40 tag 1 ncq 806912 out
res 40/00:14:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 246.846484] ata4.00: status: { DRDY }
[ 246.846485] ata4.00: failed command: WRITE FPDMA QUEUED
[ 246.846487] ata4.00: cmd 61/40:10:d4:39:44/05:00:25:00:00/40 tag 2 ncq 688128 out
res 40/00:14:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 246.846489] ata4.00: status: { DRDY }
[ 246.846491] ata4: hard resetting link
[ 247.151287] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 247.151902] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 247.151907] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 247.152734] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 247.152738] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 247.152910] ata4.00: configured for UDMA/133
[ 247.152924] ata4: EH complete
[ 247.168278] ata4.00: exception Emask 0x60 SAct 0xe000 SErr 0x800 action 0x6 frozen
[ 247.168280] ata4.00: irq_stat 0x20000000, host bus error
[ 247.168281] ata4: SError: { HostInt }
[ 247.168283] ata4.00: failed command: WRITE FPDMA QUEUED
[ 247.168286] ata4.00: cmd 61/40:68:d4:39:44/05:00:25:00:00/40 tag 13 ncq 688128 out
res 40/00:7c:3c:45:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 247.168288] ata4.00: status: { DRDY }
[ 247.168289] ata4.00: failed command: WRITE FPDMA QUEUED
[ 247.168291] ata4.00: cmd 61/28:70:14:3f:44/06:00:25:00:00/40 tag 14 ncq 806912 out
res 40/00:7c:3c:45:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 247.168293] ata4.00: status: { DRDY }
[ 247.168294] ata4.00: failed command: WRITE FPDMA QUEUED
[ 247.168296] ata4.00: cmd 61/98:78:3c:45:44/04:00:25:00:00/40 tag 15 ncq 602112 out
res 40/00:7c:3c:45:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 247.168298] ata4.00: status: { DRDY }
[ 247.168300] ata4: hard resetting link
[ 247.473092] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 247.473708] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 247.473714] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 247.474558] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 247.474562] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 247.475635] ata4.00: configured for UDMA/133
[ 247.475648] ata4: EH complete
[ 247.490086] ata4.00: exception Emask 0x60 SAct 0x1c000000 SErr 0x800 action 0x6 frozen
[ 247.490089] ata4.00: irq_stat 0x20000000, host bus error
[ 247.490090] ata4: SError: { HostInt }
[ 247.490092] ata4.00: failed command: WRITE FPDMA QUEUED
[ 247.490095] ata4.00: cmd 61/98:d0:3c:45:44/04:00:25:00:00/40 tag 26 ncq 602112 out
res 40/00:e4:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 247.490097] ata4.00: status: { DRDY }
[ 247.490098] ata4.00: failed command: WRITE FPDMA QUEUED
[ 247.490100] ata4.00: cmd 61/28:d8:14:3f:44/06:00:25:00:00/40 tag 27 ncq 806912 out
res 40/00:e4:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 247.490102] ata4.00: status: { DRDY }
[ 247.490103] ata4.00: failed command: WRITE FPDMA QUEUED
[ 247.490105] ata4.00: cmd 61/40:e0:d4:39:44/05:00:25:00:00/40 tag 28 ncq 688128 out
res 40/00:e4:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 247.490107] ata4.00: status: { DRDY }
[ 247.490109] ata4: hard resetting link
[ 247.794902] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 247.795517] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 247.795522] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 247.796359] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 247.796364] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 247.796552] ata4.00: configured for UDMA/133
[ 247.796636] sd 3:0:0:0: [sdb] tag#26 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 247.796638] sd 3:0:0:0: [sdb] tag#26 Sense Key : Aborted Command [current] [descriptor]
[ 247.796640] sd 3:0:0:0: [sdb] tag#26 Add. Sense: No additional sense information
[ 247.796643] sd 3:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 25 44 45 3c 00 04 98 00
[ 247.796660] blk_update_request: I/O error, dev sdb, sector 625231164
[ 247.796715] sd 3:0:0:0: [sdb] tag#27 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 247.796717] sd 3:0:0:0: [sdb] tag#27 Sense Key : Aborted Command [current] [descriptor]
[ 247.796719] sd 3:0:0:0: [sdb] tag#27 Add. Sense: No additional sense information
[ 247.796720] sd 3:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 25 44 3f 14 00 06 28 00
[ 247.796722] blk_update_request: I/O error, dev sdb, sector 625229588
[ 247.796756] sd 3:0:0:0: [sdb] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 247.796758] sd 3:0:0:0: [sdb] tag#28 Sense Key : Aborted Command [current] [descriptor]
[ 247.796759] sd 3:0:0:0: [sdb] tag#28 Add. Sense: No additional sense information
[ 247.796760] sd 3:0:0:0: [sdb] tag#28 CDB: Write(10) 2a 00 25 44 39 d4 00 05 40 00
[ 247.796762] blk_update_request: I/O error, dev sdb, sector 625228244
[ 247.796798] ata4: EH complete
[ 247.796821] XFS (dm-2): xfs_do_force_shutdown(0x1) called from line 1092 of file fs/xfs/xfs_buf.c. Return address = 0xffffffff81366db7
[ 247.796824] XFS (dm-2): I/O Error Detected. Shutting down filesystem
[ 247.796825] XFS (dm-2): Please umount the filesystem and rectify the problem(s)
[ 247.796827] XFS (dm-2): metadata I/O error: block 0x254421d4 ("xlog_bwrite") error 5 numblks 8192
[ 247.796964] XFS (dm-2): failed to locate log tail
[ 247.796966] XFS (dm-2): log mount/recovery failed: error -5
[ 247.797015] XFS (dm-2): log mount failed
[ 253.378978] XFS (dm-2): Mounting V4 Filesystem
[ 253.499494] ata4.00: exception Emask 0x60 SAct 0x700000 SErr 0x800 action 0x6 frozen
[ 253.499497] ata4.00: irq_stat 0x20000000, host bus error
[ 253.499498] ata4: SError: { HostInt }
[ 253.499500] ata4.00: failed command: WRITE FPDMA QUEUED
[ 253.499504] ata4.00: cmd 61/68:a0:d4:39:44/05:00:25:00:00/40 tag 20 ncq 708608 out
res 40/00:b4:3c:47:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 253.499505] ata4.00: status: { DRDY }
[ 253.499506] ata4.00: failed command: WRITE FPDMA QUEUED
[ 253.499509] ata4.00: cmd 61/00:a8:3c:3f:44/08:00:25:00:00/40 tag 21 ncq 1048576 out
res 40/00:b4:3c:47:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 253.499510] ata4.00: status: { DRDY }
[ 253.499512] ata4.00: failed command: WRITE FPDMA QUEUED
[ 253.499514] ata4.00: cmd 61/98:b0:3c:47:44/02:00:25:00:00/40 tag 22 ncq 339968 out
res 40/00:b4:3c:47:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 253.499515] ata4.00: status: { DRDY }
[ 253.499518] ata4: hard resetting link
[ 253.804305] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 253.804908] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 253.804913] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 253.805742] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 253.805747] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 253.805902] ata4.00: configured for UDMA/133
[ 253.805916] ata4: EH complete
[ 253.819300] ata4.00: exception Emask 0x60 SAct 0x7000000 SErr 0x800 action 0x6 frozen
[ 253.819302] ata4.00: irq_stat 0x20000000, host bus error
[ 253.819304] ata4: SError: { HostInt }
[ 253.819306] ata4.00: failed command: WRITE FPDMA QUEUED
[ 253.819309] ata4.00: cmd 61/98:c0:3c:47:44/02:00:25:00:00/40 tag 24 ncq 339968 out
res 40/00:d4:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 253.819311] ata4.00: status: { DRDY }
[ 253.819312] ata4.00: failed command: WRITE FPDMA QUEUED
[ 253.819314] ata4.00: cmd 61/00:c8:3c:3f:44/08:00:25:00:00/40 tag 25 ncq 1048576 out
res 40/00:d4:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 253.819316] ata4.00: status: { DRDY }
[ 253.819317] ata4.00: failed command: WRITE FPDMA QUEUED
[ 253.819319] ata4.00: cmd 61/68:d0:d4:39:44/05:00:25:00:00/40 tag 26 ncq 708608 out
res 40/00:d4:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 253.819321] ata4.00: status: { DRDY }
[ 253.819323] ata4: hard resetting link
[ 254.124112] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 254.124732] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 254.124737] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 254.125587] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 254.125591] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 254.125764] ata4.00: configured for UDMA/133
[ 254.125778] ata4: EH complete
[ 254.141103] ata4.00: exception Emask 0x60 SAct 0x1c0 SErr 0x800 action 0x6 frozen
[ 254.141105] ata4.00: irq_stat 0x20000000, host bus error
[ 254.141107] ata4: SError: { HostInt }
[ 254.141108] ata4.00: failed command: WRITE FPDMA QUEUED
[ 254.141112] ata4.00: cmd 61/68:30:d4:39:44/05:00:25:00:00/40 tag 6 ncq 708608 out
res 40/00:44:3c:47:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 254.141113] ata4.00: status: { DRDY }
[ 254.141114] ata4.00: failed command: WRITE FPDMA QUEUED
[ 254.141117] ata4.00: cmd 61/00:38:3c:3f:44/08:00:25:00:00/40 tag 7 ncq 1048576 out
res 40/00:44:3c:47:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 254.141118] ata4.00: status: { DRDY }
[ 254.141119] ata4.00: failed command: WRITE FPDMA QUEUED
[ 254.141122] ata4.00: cmd 61/98:40:3c:47:44/02:00:25:00:00/40 tag 8 ncq 339968 out
res 40/00:44:3c:47:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 254.141123] ata4.00: status: { DRDY }
[ 254.141126] ata4: hard resetting link
[ 254.445818] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 254.446443] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 254.446449] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 254.447268] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 254.447273] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 254.447443] ata4.00: configured for UDMA/133
[ 254.447457] ata4: EH complete
[ 254.460807] ata4.00: exception Emask 0x60 SAct 0x380000 SErr 0x800 action 0x6 frozen
[ 254.460809] ata4.00: irq_stat 0x20000000, host bus error
[ 254.460810] ata4: SError: { HostInt }
[ 254.460812] ata4.00: failed command: WRITE FPDMA QUEUED
[ 254.460816] ata4.00: cmd 61/98:98:3c:47:44/02:00:25:00:00/40 tag 19 ncq 339968 out
res 40/00:ac:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 254.460817] ata4.00: status: { DRDY }
[ 254.460818] ata4.00: failed command: WRITE FPDMA QUEUED
[ 254.460821] ata4.00: cmd 61/00:a0:3c:3f:44/08:00:25:00:00/40 tag 20 ncq 1048576 out
res 40/00:ac:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 254.460822] ata4.00: status: { DRDY }
[ 254.460823] ata4.00: failed command: WRITE FPDMA QUEUED
[ 254.460826] ata4.00: cmd 61/68:a8:d4:39:44/05:00:25:00:00/40 tag 21 ncq 708608 out
res 40/00:ac:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 254.460827] ata4.00: status: { DRDY }
[ 254.460830] ata4: hard resetting link
[ 254.765518] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 254.766173] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 254.766178] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 254.767782] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 254.767786] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 254.767990] ata4.00: configured for UDMA/133
[ 254.768003] ata4: EH complete
[ 254.782519] ata4.00: exception Emask 0x60 SAct 0xe SErr 0x800 action 0x6 frozen
[ 254.782521] ata4.00: irq_stat 0x20000000, host bus error
[ 254.782523] ata4: SError: { HostInt }
[ 254.782525] ata4.00: failed command: WRITE FPDMA QUEUED
[ 254.782528] ata4.00: cmd 61/68:08:d4:39:44/05:00:25:00:00/40 tag 1 ncq 708608 out
res 40/00:1c:3c:47:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 254.782529] ata4.00: status: { DRDY }
[ 254.782531] ata4.00: failed command: WRITE FPDMA QUEUED
[ 254.782533] ata4.00: cmd 61/00:10:3c:3f:44/08:00:25:00:00/40 tag 2 ncq 1048576 out
res 40/00:1c:3c:47:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 254.782534] ata4.00: status: { DRDY }
[ 254.782536] ata4.00: failed command: WRITE FPDMA QUEUED
[ 254.782538] ata4.00: cmd 61/98:18:3c:47:44/02:00:25:00:00/40 tag 3 ncq 339968 out
res 40/00:1c:3c:47:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 254.782539] ata4.00: status: { DRDY }
[ 254.782542] ata4: hard resetting link
[ 255.087220] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 255.087824] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 255.087829] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 255.088655] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 255.088659] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 255.088830] ata4.00: configured for UDMA/133
[ 255.088843] ata4: EH complete
[ 255.102206] ata4.00: exception Emask 0x60 SAct 0x1c000 SErr 0x800 action 0x6 frozen
[ 255.102209] ata4.00: irq_stat 0x20000000, host bus error
[ 255.102210] ata4: SError: { HostInt }
[ 255.102212] ata4.00: failed command: WRITE FPDMA QUEUED
[ 255.102215] ata4.00: cmd 61/98:70:3c:47:44/02:00:25:00:00/40 tag 14 ncq 339968 out
res 40/00:84:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 255.102217] ata4.00: status: { DRDY }
[ 255.102218] ata4.00: failed command: WRITE FPDMA QUEUED
[ 255.102221] ata4.00: cmd 61/00:78:3c:3f:44/08:00:25:00:00/40 tag 15 ncq 1048576 out
res 40/00:84:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 255.102222] ata4.00: status: { DRDY }
[ 255.102223] ata4.00: failed command: WRITE FPDMA QUEUED
[ 255.102226] ata4.00: cmd 61/68:80:d4:39:44/05:00:25:00:00/40 tag 16 ncq 708608 out
res 40/00:84:d4:39:44/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 255.102227] ata4.00: status: { DRDY }
[ 255.102230] ata4: hard resetting link
[ 255.406909] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 255.407561] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 255.407566] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 255.408819] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 255.408825] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 255.409051] ata4.00: configured for UDMA/133
[ 255.409065] sd 3:0:0:0: [sdb] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 255.409068] sd 3:0:0:0: [sdb] tag#14 Sense Key : Aborted Command [current] [descriptor]
[ 255.409069] sd 3:0:0:0: [sdb] tag#14 Add. Sense: No additional sense information
[ 255.409072] sd 3:0:0:0: [sdb] tag#14 CDB: Write(10) 2a 00 25 44 47 3c 00 02 98 00
[ 255.409074] blk_update_request: I/O error, dev sdb, sector 625231676
[ 255.409096] sd 3:0:0:0: [sdb] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 255.409097] sd 3:0:0:0: [sdb] tag#15 Sense Key : Aborted Command [current] [descriptor]
[ 255.409099] sd 3:0:0:0: [sdb] tag#15 Add. Sense: No additional sense information
[ 255.409101] sd 3:0:0:0: [sdb] tag#15 CDB: Write(10) 2a 00 25 44 3f 3c 00 08 00 00
[ 255.409102] blk_update_request: I/O error, dev sdb, sector 625229628
[ 255.409142] sd 3:0:0:0: [sdb] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 255.409143] sd 3:0:0:0: [sdb] tag#16 Sense Key : Aborted Command [current] [descriptor]
[ 255.409145] sd 3:0:0:0: [sdb] tag#16 Add. Sense: No additional sense information
[ 255.409146] sd 3:0:0:0: [sdb] tag#16 CDB: Write(10) 2a 00 25 44 39 d4 00 05 68 00
[ 255.409147] blk_update_request: I/O error, dev sdb, sector 625228244
[ 255.409179] ata4: EH complete
[ 255.409204] XFS (dm-2): xfs_do_force_shutdown(0x1) called from line 1092 of file fs/xfs/xfs_buf.c. Return address = 0xffffffff81366db7
[ 255.409207] XFS (dm-2): I/O Error Detected. Shutting down filesystem
[ 255.409209] XFS (dm-2): Please umount the filesystem and rectify the problem(s)
[ 255.409210] XFS (dm-2): metadata I/O error: block 0x254421d4 ("xlog_bwrite") error 5 numblks 8192
[ 255.409336] XFS (dm-2): failed to locate log tail
[ 255.409338] XFS (dm-2): log mount/recovery failed: error -5
[ 255.409380] XFS (dm-2): log mount failed
[ 614.399141] XFS (dm-2): Mounting V4 Filesystem
[ 614.515847] XFS (dm-2): Ending clean mount
[ 658.290344] XFS (dm-2): Mounting V4 Filesystem
[ 658.407061] XFS (dm-2): Ending clean mount
[2]
[ 0.000000] CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.6+ (x@x) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #16 SMP Tue Jun 23 18:20:48 EEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/grub2/bzImage-4.0.6 rw boot=LABEL=3Tboot root=/dev/mapper/luks-bea602e1-d47d-4d88-a16a-1b06543077eb rd.luks.uuid=bea602e1-d47d-4d88-a16a-1b06543077eb rootfstype=xfs rootflags=noatime i915.modeset=1 hugepages=32 printk.time=1 log_buf_len=2048k usbhid.mousepoll=1 memtest=0 rd.info rd.md=0 rd.lvm=0 plymouth.enable=0 vconsole.keymap=fi vconsole.font=lat9w-08 SYSFONTACM=iso15 LANG=en_US.UTF-8 intel_iommu=on
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da390fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da391000-0x00000000da5f0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da5f1000-0x00000000da674fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da675000-0x00000000da940fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da941000-0x00000000dab85fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dab86000-0x00000000dab93fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dab94000-0x00000000dabc0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dabc1000-0x00000000dabc5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dabc6000-0x00000000dac08fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dac09000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8Z68-V PRO GEN3, BIOS 3402 05/07/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x41f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 41F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 41F600000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fce00-0x000fce0f] mapped at [ffff8800000fce00]
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0304a000, 0x0304afff] PGTABLE
[ 0.000000] BRK [0x0304b000, 0x0304bfff] PGTABLE
[ 0.000000] BRK [0x0304c000, 0x0304cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41f400000-0x41f5fffff]
[ 0.000000] [mem 0x41f400000-0x41f5fffff] page 2M
[ 0.000000] BRK [0x0304d000, 0x0304dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41f3fffff]
[ 0.000000] [mem 0x400000000-0x41f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x3e0000000-0x3ffffffff]
[ 0.000000] [mem 0x3e0000000-0x3ffffffff] page 2M
[ 0.000000] BRK [0x0304e000, 0x0304efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xda390fff]
[ 0.000000] [mem 0x40200000-0xda1fffff] page 2M
[ 0.000000] [mem 0xda200000-0xda390fff] page 4k
[ 0.000000] BRK [0x0304f000, 0x0304ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdac09000-0xdaffffff]
[ 0.000000] [mem 0xdac09000-0xdadfffff] page 4k
[ 0.000000] [mem 0xdae00000-0xdaffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3dfffffff]
[ 0.000000] [mem 0x100000000-0x3dfffffff] page 2M
[ 0.000000] log_buf_len: 2097152 bytes
[ 0.000000] early log buf free: 124792(95%)
[ 0.000000] RAMDISK: [mem 0x10b6c000-0x1fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DAB86070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DAB91C68 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DAB86168 00BAFE (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DABBFF80 000040
[ 0.000000] ACPI: APIC 0x00000000DAB91D60 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DAB91DD8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DAB91E18 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DAB91E50 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DAB921C0 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DAB92B70 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x00000000DAB93608 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41f3cb000-0x41f3f0fff]
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040ea00000-ffff88041e9fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009afff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000da390fff]
[ 0.000000] node 0: [mem 0x00000000dac09000-0x00000000daffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f5fffff]
[ 0.000000] On node 0 totalpages: 4167970
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 154 pages reserved
[ 0.000000] DMA zone: 3994 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13903 pages used for memmap
[ 0.000000] DMA32 zone: 889736 pages, LIFO batch:31
[ 0.000000] Normal zone: 51160 pages used for memmap
[ 0.000000] Normal zone: 3274240 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 480 pages/cpu @ffff88040e200000 s1928728 r8192 d29160 u2097152
[ 0.000000] pcpu-alloc: s1928728 r8192 d29160 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4102689
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/grub2/bzImage-4.0.6 rw boot=LABEL=3Tboot root=/dev/mapper/luks-bea602e1-d47d-4d88-a16a-1b06543077eb rd.luks.uuid=bea602e1-d47d-4d88-a16a-1b06543077eb rootfstype=xfs rootflags=noatime i915.modeset=1 hugepages=32 printk.time=1 log_buf_len=2048k usbhid.mousepoll=1 memtest=0 rd.info rd.md=0 rd.lvm=0 plymouth.enable=0 vconsole.keymap=fi vconsole.font=lat9w-08 SYSFONTACM=iso15 LANG=en_US.UTF-8 intel_iommu=on
[ 0.000000] Intel-IOMMU: enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 16048916K/16671880K available (9298K kernel code, 1242K rwdata, 4164K rodata, 3232K init, 12164K bss, 622964K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 8639 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] random: add_entropy_bytes (nbytes=8 source=1) called before rand_initialize
[ 0.000000] random: rand_initialize starting
[ 0.000000] random: add_entropy_bytes 144 while reseed_count == 0
[ 0.000000] random: add_entropy_bytes 312 while reseed_count == 0
[ 0.000000] random: add_entropy_bytes 390 while reseed_count == 0
[ 0.000000] random: fed 11 KiB from add_device_randomness
[ 0.000000] random: add_entropy_bytes 64 while reseed_count == 0
[ 0.000000] random: random_reseed() reseeds=1 pool0_len=910
[ 0.000000] random: rand_initialize finished (random_debug=0/debug_max=15
[ 0.000000] tsc: Detected 3310.575 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6621.15 BogoMIPS (lpj=3310575)
[ 0.000147] pid_max: default: 32768 minimum: 301
[ 0.000224] ACPI: Core revision 20150204
[ 0.012585] ACPI: All ACPI Tables successfully acquired
[ 0.229033] Security Framework initialized
[ 0.229108] Yama: becoming mindful.
[ 0.229909] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.232443] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.233602] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.233693] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.234105] Initializing cgroup subsys blkio
[ 0.234177] Initializing cgroup subsys freezer
[ 0.234253] Initializing cgroup subsys net_cls
[ 0.234336] Initializing cgroup subsys perf_event
[ 0.234409] Initializing cgroup subsys net_prio
[ 0.234502] CPU: Physical Processor ID: 0
[ 0.234572] CPU: Processor Core ID: 0
[ 0.234644] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.234718] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.234793] mce: CPU supports 9 MCE banks
[ 0.234873] CPU0: Thermal monitoring enabled (TM1)
[ 0.234953] process: using mwait in idle threads
[ 0.235026] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.235099] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.235269] Freeing SMP alternatives memory: 32K (ffffffff82460000 - ffffffff82468000)
[ 0.236741] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.246810] TSC deadline timer enabled
[ 0.246814] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[ 0.247051] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.247361] ... version: 3
[ 0.247432] ... bit width: 48
[ 0.247502] ... generic registers: 8
[ 0.247573] ... value mask: 0000ffffffffffff
[ 0.248289] ... max period: 0000ffffffffffff
[ 0.248362] ... fixed-purpose events: 3
[ 0.248432] ... event mask: 00000007000000ff
[ 0.249303] x86: Booting SMP configuration:
[ 0.249374] .... node #0, CPUs: #1
[ 0.260734] CPU1 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.262885] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.263259] #2
[ 0.274542] CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.276757] #3
[ 0.288179] CPU3 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.290275] x86: Booted up 1 node, 4 CPUs
[ 0.290450] smpboot: Total of 4 processors activated (26484.60 BogoMIPS)
[ 0.293075] devtmpfs: initialized
[ 0.293574] PM: Registering ACPI NVS region [mem 0xda5f1000-0xda674fff] (540672 bytes)
[ 0.293684] PM: Registering ACPI NVS region [mem 0xda941000-0xdab85fff] (2379776 bytes)
[ 0.293816] PM: Registering ACPI NVS region [mem 0xdab94000-0xdabc0fff] (184320 bytes)
[ 0.293921] PM: Registering ACPI NVS region [mem 0xdabc6000-0xdac08fff] (274432 bytes)
[ 0.294195] xor: automatically using best checksumming function:
[ 0.303801] avx : 22980.000 MB/sec
[ 0.303875] prandom: seed boundary self test passed
[ 0.304339] prandom: 100 self tests passed
[ 0.304413] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 0.304488] pinctrl core: initialized pinctrl subsystem
[ 0.304926] NET: Registered protocol family 16
[ 0.309829] cpuidle: using governor ladder
[ 0.315844] cpuidle: using governor menu
[ 0.316031] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.316139] ACPI: bus type PCI registered
[ 0.316303] dca service started, version 1.12.1
[ 0.316405] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.316512] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.316656] PCI: Using configuration type 1 for base access
[ 0.342884] raid6: sse2x1 8765 MB/s
[ 0.359898] raid6: sse2x2 11105 MB/s
[ 0.376910] raid6: sse2x4 12820 MB/s
[ 0.376980] raid6: using algorithm sse2x4 (12820 MB/s)
[ 0.377052] raid6: using ssse3x2 recovery algorithm
[ 0.377244] ACPI: Added _OSI(Module Device)
[ 0.377317] ACPI: Added _OSI(Processor Device)
[ 0.377389] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.377460] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.387330] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.393705] ACPI: Dynamic OEM Table Load:
[ 0.393861] ACPI: SSDT 0xFFFF88040C307000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.395624] ACPI: Dynamic OEM Table Load:
[ 0.395776] ACPI: SSDT 0xFFFF88040BD36000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.397418] ACPI: Dynamic OEM Table Load:
[ 0.397567] ACPI: SSDT 0xFFFF88040B40F400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.399947] ACPI: Interpreter enabled
[ 0.400028] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.400223] ACPI: (supports S0 S1 S3 S5)
[ 0.400294] ACPI: Using IOAPIC for interrupt routing
[ 0.400405] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.413935] ACPI: Power Resource [FN00] (off)
[ 0.414187] ACPI: Power Resource [FN01] (off)
[ 0.414416] ACPI: Power Resource [FN02] (off)
[ 0.414646] ACPI: Power Resource [FN03] (off)
[ 0.414874] ACPI: Power Resource [FN04] (off)
[ 0.416360] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.416439] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.416652] \_SB_.PCI0:_OSC invalid UUID
[ 0.416653] _OSC request data:1 1f 0
[ 0.416656] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.417291] PCI host bridge to bus 0000:00
[ 0.417363] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.417437] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.417512] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.417587] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.417689] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.417792] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.417895] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.418000] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.418103] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.418205] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.418322] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.418510] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.418559] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.418663] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.418814] pci 0000:00:02.0: [8086:0112] type 00 class 0x030000
[ 0.418827] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.418835] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.418840] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.419049] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.419082] pci 0000:00:16.0: reg 0x10: [mem 0xf7d2c000-0xf7d2c00f 64bit]
[ 0.419196] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.419373] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.419399] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[ 0.419411] pci 0000:00:19.0: reg 0x14: [mem 0xf7d29000-0xf7d29fff]
[ 0.419422] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.419527] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.419623] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.419772] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.419803] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d28000-0xf7d283ff]
[ 0.419932] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.420052] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.420202] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.420229] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d20000-0xf7d23fff 64bit]
[ 0.420351] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.420449] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.420593] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.420727] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.420831] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.420975] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.421108] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.421209] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.421354] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.421486] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.421587] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.421730] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.421864] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.421964] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.422111] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[ 0.422245] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.422345] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.422489] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.422621] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.422718] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.422867] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.422896] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d27000-0xf7d273ff]
[ 0.423034] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.423205] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
[ 0.423506] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.423538] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.423550] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.423561] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.423572] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.423584] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.423596] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d26000-0xf7d267ff]
[ 0.423674] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.423833] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.423854] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d25000-0xf7d250ff 64bit]
[ 0.423886] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.424113] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.424288] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.424510] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.424551] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c07fff 64bit]
[ 0.424759] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.424807] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.427081] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.427179] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.427320] pci 0000:04:00.0: [197b:2362] type 00 class 0x010185
[ 0.427369] pci 0000:04:00.0: reg 0x10: [io 0xe040-0xe047]
[ 0.427389] pci 0000:04:00.0: reg 0x14: [io 0xe030-0xe033]
[ 0.427408] pci 0000:04:00.0: reg 0x18: [io 0xe020-0xe027]
[ 0.427428] pci 0000:04:00.0: reg 0x1c: [io 0xe010-0xe013]
[ 0.427448] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe00f]
[ 0.427467] pci 0000:04:00.0: reg 0x24: [mem 0xf7b10000-0xf7b101ff]
[ 0.427487] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.427579] pci 0000:04:00.0: PME# supported from D3hot
[ 0.427626] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.429085] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.429179] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.429184] pci 0000:00:1c.3: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.429330] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.429372] pci 0000:05:00.0: reg 0x10: [mem 0xf7a00000-0xf7a07fff 64bit]
[ 0.429585] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 0.429633] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.431089] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.431187] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.431314] pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401
[ 0.431484] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.431619] pci 0000:00:1c.6: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.431698] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.431703] pci 0000:00:1c.6: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.431710] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.431712] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.431713] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.431715] pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.431716] pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.431717] pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.431718] pci 0000:00:1c.6: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.431720] pci 0000:00:1c.6: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.431721] pci 0000:00:1c.6: bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode)
[ 0.431821] pci 0000:07:02.0: [1106:3044] type 00 class 0x0c0010
[ 0.431856] pci 0000:07:02.0: reg 0x10: [mem 0xf7900000-0xf79007ff]
[ 0.431876] pci 0000:07:02.0: reg 0x14: [io 0xd000-0xd07f]
[ 0.432034] pci 0000:07:02.0: supports D2
[ 0.432035] pci 0000:07:02.0: PME# supported from D2 D3hot D3cold
[ 0.432198] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.432283] pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
[ 0.432289] pci 0000:06:00.0: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.432301] pci 0000:06:00.0: bridge window [io 0xd000-0xdfff] (subtractive decode)
[ 0.432302] pci 0000:06:00.0: bridge window [mem 0xf7900000-0xf79fffff] (subtractive decode)
[ 0.432303] pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.432305] pci 0000:06:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.432306] pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.432307] pci 0000:06:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.432308] pci 0000:06:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.432310] pci 0000:06:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.432311] pci 0000:06:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.432312] pci 0000:06:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.432314] pci 0000:06:00.0: bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode)
[ 0.432451] pci 0000:08:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.432476] pci 0000:08:00.0: reg 0x10: [io 0xc040-0xc047]
[ 0.432492] pci 0000:08:00.0: reg 0x14: [io 0xc030-0xc033]
[ 0.432508] pci 0000:08:00.0: reg 0x18: [io 0xc020-0xc027]
[ 0.432525] pci 0000:08:00.0: reg 0x1c: [io 0xc010-0xc013]
[ 0.432540] pci 0000:08:00.0: reg 0x20: [io 0xc000-0xc00f]
[ 0.432556] pci 0000:08:00.0: reg 0x24: [mem 0xf7810000-0xf78101ff]
[ 0.432572] pci 0000:08:00.0: reg 0x30: [mem 0xf7800000-0xf780ffff pref]
[ 0.432661] pci 0000:08:00.0: PME# supported from D3hot
[ 0.432701] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.432856] pci 0000:00:1c.7: PCI bridge to [bus 08]
[ 0.432932] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.432936] pci 0000:00:1c.7: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.433808] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.434373] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.434929] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.435487] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.436042] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.436600] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.437263] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.437819] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.438760] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.438948] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.439282] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.439357] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.439467] vgaarb: loaded
[ 0.439535] vgaarb: bridge control possible 0000:00:02.0
[ 0.439971] SCSI subsystem initialized
[ 0.440112] libata version 3.00 loaded.
[ 0.440224] EDAC MC: Ver: 3.0.0
[ 0.440543] PCI: Using ACPI for IRQ routing
[ 0.442209] PCI: pci_cache_line_size set to 64 bytes
[ 0.442310] e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff]
[ 0.442312] e820: reserve RAM buffer [mem 0xda391000-0xdbffffff]
[ 0.442314] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.442315] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff]
[ 0.442544] nfc: nfc_init: NFC Core ver 0.1
[ 0.442641] NET: Registered protocol family 39
[ 0.442803] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.443215] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.445357] Switched to clocksource hpet
[ 0.459117] pnp: PnP ACPI init
[ 0.459333] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.459434] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.459564] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.459640] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.459715] system 00:01: [io 0xffff] has been reserved
[ 0.459787] system 00:01: [io 0xffff] has been reserved
[ 0.459861] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 0.459935] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.460009] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.460082] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.460157] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.460211] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.460304] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.460398] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.460541] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.460619] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.460711] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.460789] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.461272] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.461361] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.461436] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.461510] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.461586] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.461661] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.461736] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.461811] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.461886] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.461961] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.462036] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.462113] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.462368] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[ 0.462446] system 00:07: [mem 0x40000000-0x401fffff] has been reserved
[ 0.462522] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.462559] pnp: PnP ACPI: found 8 devices
[ 0.470378] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.470381] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.470382] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.470451] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.470453] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.470454] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.470460] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
[ 0.470542] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref]
[ 0.470646] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.470721] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.470798] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.470872] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.470950] pci 0000:00:1c.0: bridge window [mem 0xdfb00000-0xdfcfffff]
[ 0.471029] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfefffff 64bit pref]
[ 0.471139] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.471216] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.471302] pci 0000:04:00.0: BAR 6: assigned [mem 0xf7b00000-0xf7b0ffff pref]
[ 0.472062] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.472136] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.472214] pci 0000:00:1c.3: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.472299] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 0.472390] pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.472475] pci 0000:06:00.0: PCI bridge to [bus 07]
[ 0.472550] pci 0000:06:00.0: bridge window [io 0xd000-0xdfff]
[ 0.472631] pci 0000:06:00.0: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.472721] pci 0000:00:1c.6: PCI bridge to [bus 06-07]
[ 0.472795] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.472874] pci 0000:00:1c.6: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.472958] pci 0000:00:1c.7: PCI bridge to [bus 08]
[ 0.473032] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.473111] pci 0000:00:1c.7: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.473198] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.473199] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.473201] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.473202] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.473203] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.473204] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.473206] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[ 0.473207] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
[ 0.473208] pci_bus 0000:00: resource 12 [mem 0xdfa00000-0xfeafffff window]
[ 0.473210] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.473211] pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfcfffff]
[ 0.473213] pci_bus 0000:02: resource 2 [mem 0xdfd00000-0xdfefffff 64bit pref]
[ 0.473214] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.473215] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.473217] pci_bus 0000:04: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.473218] pci_bus 0000:05: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.473219] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 0.473221] pci_bus 0000:06: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.473222] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.473223] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.473224] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.473226] pci_bus 0000:06: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.473227] pci_bus 0000:06: resource 8 [mem 0x000d8000-0x000dbfff window]
[ 0.473228] pci_bus 0000:06: resource 9 [mem 0x000dc000-0x000dffff window]
[ 0.473230] pci_bus 0000:06: resource 10 [mem 0x000e0000-0x000e3fff window]
[ 0.473231] pci_bus 0000:06: resource 11 [mem 0x000e4000-0x000e7fff window]
[ 0.473232] pci_bus 0000:06: resource 12 [mem 0xdfa00000-0xfeafffff window]
[ 0.473234] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.473235] pci_bus 0000:07: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.473236] pci_bus 0000:07: resource 4 [io 0xd000-0xdfff]
[ 0.473237] pci_bus 0000:07: resource 5 [mem 0xf7900000-0xf79fffff]
[ 0.473239] pci_bus 0000:07: resource 6 [io 0x0000-0x0cf7 window]
[ 0.473240] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window]
[ 0.473241] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.473242] pci_bus 0000:07: resource 9 [mem 0x000d4000-0x000d7fff window]
[ 0.473244] pci_bus 0000:07: resource 10 [mem 0x000d8000-0x000dbfff window]
[ 0.473245] pci_bus 0000:07: resource 11 [mem 0x000dc000-0x000dffff window]
[ 0.473246] pci_bus 0000:07: resource 12 [mem 0x000e0000-0x000e3fff window]
[ 0.473248] pci_bus 0000:07: resource 13 [mem 0x000e4000-0x000e7fff window]
[ 0.473249] pci_bus 0000:07: resource 14 [mem 0xdfa00000-0xfeafffff window]
[ 0.473250] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.473252] pci_bus 0000:08: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.473294] NET: Registered protocol family 2
[ 0.473658] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.474140] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes)
[ 0.475961] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.476070] TCP: reno registered
[ 0.476210] UDP hash table entries: 8192 (order: 8, 1572864 bytes)
[ 0.476791] UDP-Lite hash table entries: 8192 (order: 8, 1572864 bytes)
[ 0.477396] NET: Registered protocol family 1
[ 0.477484] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.723858] PCI: CLS 64 bytes, default 64
[ 0.723941] Trying to unpack rootfs image as initramfs...
[ 4.205076] Freeing initrd memory: 250448K (ffff880010b6c000 - ffff880020000000)
[ 4.205189] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.205263] software IO TLB [mem 0xd6391000-0xda391000] (64MB) mapped at [ffff8800d6391000-ffff8800da390fff]
[ 4.205730] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 4.206015] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
[ 4.206096] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
[ 4.206177] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
[ 4.206258] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
[ 4.206407] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 4.207378] AVX version of gcm_enc/dec engaged.
[ 4.207450] AES CTR mode by8 optimization enabled
[ 4.208065] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 4.208200] sha256_ssse3: Using AVX optimized SHA-256 implementation
[ 4.208334] sha512_ssse3: Using AVX optimized SHA-512 implementation
[ 4.209315] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 4.209465] audit: initializing netlink subsys (disabled)
[ 4.209570] audit: type=2000 audit(1435074993.990:1): initialized
[ 4.210300] HugeTLB registered 2 MB page size, pre-allocated 32 pages
[ 4.213933] VFS: Disk quotas dquot_6.5.2
[ 4.214063] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.214953] SGI XFS with ACLs, security attributes, no debug enabled
[ 4.217516] async_tx: api initialized (async)
[ 4.217607] bounce: pool size: 64 pages
[ 4.217691] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 4.217864] io scheduler noop registered
[ 4.217938] io scheduler deadline registered
[ 4.218019] io scheduler cfq registered (default)
[ 4.218092] Running resizable hashtable tests...
[ 4.218167] Adding 2048 keys
[ 4.218800] Traversal complete: counted=2048, nelems=2048, entries=2048
[ 4.220905] Table expansion iteration 0...
[ 4.713352] Verifying lookups...
[ 4.714677] Table expansion iteration 1...
[ 4.996085] Verifying lookups...
[ 4.997008] Table expansion iteration 2...
[ 5.193899] Verifying lookups...
[ 5.194632] Table expansion iteration 3...
[ 5.205914] tsc: Refined TSC clocksource calibration: 3310.799 MHz
[ 5.295807] Verifying lookups...
[ 5.296446] Table shrinkage iteration 0...
[ 5.307795] Verifying lookups...
[ 5.308519] Table shrinkage iteration 1...
[ 5.319783] Verifying lookups...
[ 5.320702] Table shrinkage iteration 2...
[ 5.332769] Verifying lookups...
[ 5.334080] Table shrinkage iteration 3...
[ 5.344757] Verifying lookups...
[ 5.346863] Traversal complete: counted=2048, nelems=2048, entries=2048
[ 5.346938] Deleting 2048 keys
[ 5.348342] xz_dec_test: module loaded
[ 5.348413] xz_dec_test: Create a device node with 'mknod xz_dec_test c 251 0' and write .xz files to it.
[ 5.349753] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.349883] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 5.349964] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[ 5.350065] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[ 5.350171] cpcihp_generic: not configured, disabling.
[ 5.350271] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.350418] intel_idle: MWAIT substates: 0x1120
[ 5.350419] intel_idle: v0.4 model 0x2A
[ 5.350420] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 5.350845] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 5.350963] ACPI: Power Button [PWRB]
[ 5.351101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.351212] ACPI: Power Button [PWRF]
[ 5.352672] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.352757] ACPI: Thermal Zone [TZ00] (28 C)
[ 5.353214] thermal LNXTHERM:01: registered as thermal_zone1
[ 5.353288] ACPI: Thermal Zone [TZ01] (30 C)
[ 5.353558] GHES: HEST is not enabled!
[ 5.353642] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 5.353787] xenfs: not registering filesystem on non-xen platform
[ 5.354013] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.354634] random: module_init call_rand_initialize
[ 5.355001] Linux agpgart interface v0.103
[ 5.355213] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
[ 5.355294] AMD IOMMUv2 functionality not available on this system
[ 5.355385] [drm] Initialized drm 1.1.0 20060810
[ 5.358438] brd: module loaded
[ 5.364194] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 5.364313] mpt3sas version 04.100.00.00 loaded
[ 5.364501] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 5.364609] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 5.364714] osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 5.364957] ahci 0000:00:1f.2: version 3.0
[ 5.375809] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3c impl SATA mode
[ 5.375924] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 5.383029] scsi host0: ahci
[ 5.383321] scsi host1: ahci
[ 5.383603] scsi host2: ahci
[ 5.383846] scsi host3: ahci
[ 5.384062] scsi host4: ahci
[ 5.384271] scsi host5: ahci
[ 5.384431] ata1: DUMMY
[ 5.384501] ata2: DUMMY
[ 5.384570] ata3: SATA max UDMA/133 abar m2048@0xf7d26000 port 0xf7d26200 irq 26
[ 5.384673] ata4: SATA max UDMA/133 abar m2048@0xf7d26000 port 0xf7d26280 irq 26
[ 5.384797] ata5: SATA max UDMA/133 abar m2048@0xf7d26000 port 0xf7d26300 irq 26
[ 5.384899] ata6: SATA max UDMA/133 abar m2048@0xf7d26000 port 0xf7d26380 irq 26
[ 5.385178] ahci 0000:04:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 5.385284] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 5.385811] scsi host6: ahci
[ 5.386039] scsi host7: ahci
[ 5.386210] ata7: SATA max UDMA/133 abar m512@0xf7b10000 port 0xf7b10100 irq 19
[ 5.386316] ata8: SATA max UDMA/133 abar m512@0xf7b10000 port 0xf7b10180 irq 19
[ 5.386600] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 5.386718] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 5.387274] scsi host8: ahci
[ 5.387489] scsi host9: ahci
[ 5.387651] ata9: SATA max UDMA/133 abar m512@0xf7810000 port 0xf7810100 irq 27
[ 5.387782] ata10: SATA max UDMA/133 abar m512@0xf7810000 port 0xf7810180 irq 27
[ 5.388725] VFIO - User Level meta-driver version: 0.3
[ 5.388923] random: random_reseed() reseeds=2 pool0_len=318
[ 5.389155] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 5.391596] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.391681] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.391897] mousedev: PS/2 mouse device common for all mice
[ 5.392354] md: linear personality registered for level -1
[ 5.392437] md: raid0 personality registered for level 0
[ 5.392512] md: raid1 personality registered for level 1
[ 5.392585] md: raid10 personality registered for level 10
[ 5.392757] md: raid6 personality registered for level 6
[ 5.392835] md: raid5 personality registered for level 5
[ 5.392907] md: raid4 personality registered for level 4
[ 5.393215] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@xxxxxxxxxx
[ 5.393568] AMD64 EDAC driver v3.4.0
[ 5.393713] Intel P-state driver initializing.
[ 5.393999] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.394383] GACT probability on
[ 5.394456] Mirror/redirect action on
[ 5.394586] TCP: bic registered
[ 5.394656] Initializing XFRM netlink socket
[ 5.395045] NET: Registered protocol family 10
[ 5.395415] sit: IPv6 over IPv4 tunneling driver
[ 5.395660] NET: Registered protocol family 17
[ 5.395790] Key type dns_resolver registered
[ 5.395867] Key type ceph registered
[ 5.396024] libceph: loaded (mon/osd proto 15/24)
[ 5.397342] registered taskstats version 1
[ 5.398056] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 5.398341] random: random_int_secret_init
[ 5.689500] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.689641] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.689772] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.689902] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.690371] ACPI Error: [DSSP]
[ 5.690502] ata7: SATA link down (SStatus 0 SControl 300)
[ 5.690580] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.690761] Namespace lookup failure, AE_NOT_FOUND
[ 5.690869] (20150204/psargs-359)
[ 5.690937] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 5.691285] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 5.691529] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 5.691847] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 5.692071] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88040dcba708), AE_NOT_FOUND (20150204/psparse-536)
[ 5.692396] ACPI Error: [DSSP]
[ 5.692533] ata9: SATA link down (SStatus 0 SControl 300)
[ 5.692686] Namespace lookup failure, AE_NOT_FOUND
[ 5.692794] (20150204/psargs-359)
[ 5.692862] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88040dcba780), AE_NOT_FOUND (20150204/psparse-536)
[ 5.693124] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB01, max UDMA/100
[ 5.693273] ata3.00: ATA-8: WDC WD6401AALS-00E8B0, 05.00K05, max UDMA/133
[ 5.693359] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.693494] ata4.00: ATA-8: WDC WD6401AALS-00E8B0, 05.00K05, max UDMA/133
[ 5.693586] ata4.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.694566] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 5.694784] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 5.695337] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 5.695573] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 5.695914] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 5.696138] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88040dcba780), AE_NOT_FOUND (20150204/psparse-536)
[ 5.696402] ata6.00: configured for UDMA/100
[ 5.696552] ata3.00: configured for UDMA/133
[ 5.696834] ata4.00: configured for UDMA/133
[ 5.696870] scsi 2:0:0:0: Direct-Access ATA WDC WD6401AALS-0 0K05 PQ: 0 ANSI: 5
[ 5.697395] sd 2:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 5.697469] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 5.697853] scsi 3:0:0:0: Direct-Access ATA WDC WD6401AALS-0 0K05 PQ: 0 ANSI: 5
[ 5.697892] sd 2:0:0:0: [sda] Write Protect is off
[ 5.697893] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.698014] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.698468] sd 3:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 5.698543] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 5.698762] sd 3:0:0:0: [sdb] Write Protect is off
[ 5.698836] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.698885] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.733318] sdb: sdb1
[ 5.734059] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 5.734961] sda: sda1
[ 5.735627] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.738973] ata5.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 5.739048] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.764482] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 5.764700] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88040dcba708), AE_NOT_FOUND (20150204/psparse-536)
[ 5.797258] ata5.00: configured for UDMA/133
[ 5.797535] scsi 4:0:0:0: Direct-Access ATA ST3320620AS E PQ: 0 ANSI: 5
[ 5.798120] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 5.798122] sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 5.798219] sd 4:0:0:0: [sdc] Write Protect is off
[ 5.798221] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.798257] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.801013] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB01 PQ: 0 ANSI: 5
[ 5.827193] sr 5:0:0:0: [sr0] scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.827322] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.827617] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 5.827764] sr 5:0:0:0: Attached scsi generic sg3 type 5
[ 5.847358] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5.848123] ata10.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
[ 5.848200] ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.849052] ata10.00: configured for UDMA/133
[ 5.849330] scsi 9:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5
[ 5.849848] sd 9:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 5.849977] sd 9:0:0:0: [sdd] 4096-byte physical blocks
[ 5.850076] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 5.850258] sd 9:0:0:0: [sdd] Write Protect is off
[ 5.850375] sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 5.850447] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.857686] sdc: sdc1
[ 5.858130] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 5.895116] sdd: sdd1 sdd2 sdd3 sdd4
[ 5.896087] sd 9:0:0:0: [sdd] Attached SCSI disk
[ 5.896854] Freeing unused kernel memory: 3232K (ffffffff82138000 - ffffffff82460000)
[ 5.896958] Write protecting the kernel read-only data: 16384k
[ 5.897666] Freeing unused kernel memory: 928K (ffff880001918000 - ffff880001a00000)
[ 5.898304] Freeing unused kernel memory: 1980K (ffff880001e11000 - ffff880002000000)
[ 5.900919] systemd[1]: Inserted module 'autofs4'
[ 5.902387] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.902750] systemd[1]: Detected architecture x86-64.
[ 5.902824] systemd[1]: Running in initial RAM disk.
[ 5.903354] systemd[1]: No hostname configured.
[ 5.903434] systemd[1]: Set hostname to <localhost>.
[ 5.903530] systemd[1]: Initializing machine ID from random generator.
[ 5.932581] systemd[1]: Reached target Timers.
[ 5.932659] systemd[1]: Starting Timers.
[ 5.933054] systemd[1]: Reached target Local File Systems.
[ 5.933132] systemd[1]: Starting Local File Systems.
[ 5.933547] systemd[1]: Reached target Swap.
[ 5.933622] systemd[1]: Starting Swap.
[ 5.934291] systemd[1]: Created slice -.slice.
[ 5.934368] systemd[1]: Starting -.slice.
[ 5.934802] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.934881] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.935338] systemd[1]: Listening on udev Control Socket.
[ 5.935415] systemd[1]: Starting udev Control Socket.
[ 5.935837] systemd[1]: Listening on Journal Socket.
[ 5.935915] systemd[1]: Starting Journal Socket.
[ 5.936357] systemd[1]: Listening on udev Kernel Socket.
[ 5.936435] systemd[1]: Starting udev Kernel Socket.
[ 5.936841] systemd[1]: Listening on Journal Audit Socket.
[ 5.936917] systemd[1]: Starting Journal Audit Socket.
[ 5.937369] systemd[1]: Reached target Sockets.
[ 5.937445] systemd[1]: Starting Sockets.
[ 5.937935] systemd[1]: Created slice System Slice.
[ 5.938012] systemd[1]: Starting System Slice.
[ 5.938600] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.939416] systemd[1]: Starting Setup Virtual Console...
[ 5.940237] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.940319] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.940412] systemd[1]: Started Device-Mapper Multipath Device Controller.
[ 5.940990] systemd[1]: Starting Journal Service...
[ 5.941622] systemd[1]: Reached target Slices.
[ 5.941702] systemd[1]: Starting Slices.
[ 5.941812] systemd[1]: Started dracut ask for additional cmdline parameters.
[ 5.942493] systemd[1]: Starting Load Kernel Modules...
[ 5.945724] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 5.945800] systemd[1]: Starting system-systemd\x2dcryptsetup.slice.
[ 5.946502] systemd[1]: Starting dracut cmdline hook...
[ 5.947807] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.947947] audit: type=1130 audit(1435074995.730:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.949471] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.954421] systemd[1]: Started Setup Virtual Console.
[ 5.954505] audit: type=1130 audit(1435074995.737:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.955299] systemd[1]: Started Create Static Device Nodes in /dev.
[ 5.955369] audit: type=1130 audit(1435074995.738:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.980332] systemd[1]: Started Journal Service.
[ 5.980434] audit: type=1130 audit(1435074995.763:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.047786] audit: type=1130 audit(1435074995.830:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.054335] audit: type=1130 audit(1435074995.837:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 6.059105] audit: type=1130 audit(1435074995.842:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.064687] RPC: Registered named UNIX socket transport module.
[ 6.064776] RPC: Registered udp transport module.
[ 6.064848] RPC: Registered tcp transport module.
[ 6.064919] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.102093] audit: type=1130 audit(1435074995.885:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.107153] audit: type=1130 audit(1435074995.890:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.183795] random: random_reseed() reseeds=3 pool0_len=270
[ 6.205035] Switched to clocksource tsc
[ 6.251308] wmi: Mapper loaded
[ 6.272436] ACPI: bus type USB registered
[ 6.275043] pps_core: LinuxPPS API ver. 1 registered
[ 6.275123] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 6.275322] usbcore: registered new interface driver usbfs
[ 6.275492] usbcore: registered new interface driver hub
[ 6.275603] usbcore: registered new device driver usb
[ 6.277297] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 6.277405] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[ 6.278088] [drm] Memory usable by graphics device = 2048M
[ 6.278265] [drm] Replacing VGA console driver
[ 6.280866] Console: switching to colour dummy device 80x25
[ 6.281767] PTP clock support registered
[ 6.283623] firewire_ohci: Unknown symbol fw_card_add (err 0)
[ 6.283631] firewire_ohci: Unknown symbol fw_core_handle_request (err 0)
[ 6.283640] firewire_ohci: Unknown symbol fw_core_remove_card (err 0)
[ 6.283653] firewire_ohci: Unknown symbol fw_core_handle_response (err 0)
[ 6.283658] firewire_ohci: Unknown symbol fw_fill_response (err 0)
[ 6.283663] firewire_ohci: Unknown symbol fw_schedule_bus_reset (err 0)
[ 6.283668] firewire_ohci: Unknown symbol fw_card_initialize (err 0)
[ 6.283678] firewire_ohci: Unknown symbol fw_core_handle_bus_reset (err 0)
[ 6.283854] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 6.283866] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 6.291988] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.291993] [drm] Driver supports precise vblank timestamp query.
[ 6.292161] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.338644] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 6.338939] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.338944] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.338945] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.338946] usb usb1: Product: xHCI Host Controller
[ 6.338947] usb usb1: Manufacturer: Linux 4.0.6+ xhci-hcd
[ 6.338948] usb usb1: SerialNumber: 0000:03:00.0
[ 6.339540] hub 1-0:1.0: USB hub found
[ 6.339571] hub 1-0:1.0: 2 ports detected
[ 6.339592] acpi device:62: registered as cooling_device9
[ 6.339729] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 6.340590] random: random_reseed() reseeds=4 pool0_len=261
[ 6.340698] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
[ 6.340943] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 6.340952] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 6.341034] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 6.341039] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.341044] usb usb2: Product: xHCI Host Controller
[ 6.341047] usb usb2: Manufacturer: Linux 4.0.6+ xhci-hcd
[ 6.341050] usb usb2: SerialNumber: 0000:03:00.0
[ 6.341321] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 6.341364] hub 2-0:1.0: USB hub found
[ 6.341380] hub 2-0:1.0: 2 ports detected
[ 6.341634] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 6.341643] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 6.343745] fbcon: inteldrmfb (fb0) is primary device
[ 6.345039] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.345243] ehci-pci: EHCI PCI platform driver
[ 6.371434] Console: switching to colour frame buffer device 240x75
[ 6.375408] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.375410] i915 0000:00:02.0: registered panic notifier
[ 6.402741] xhci_hcd 0000:05:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 6.403017] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.403029] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.403042] usb usb3: Product: xHCI Host Controller
[ 6.403050] usb usb3: Manufacturer: Linux 4.0.6+ xhci-hcd
[ 6.403060] usb usb3: SerialNumber: 0000:05:00.0
[ 6.403273] hub 3-0:1.0: USB hub found
[ 6.403298] hub 3-0:1.0: 2 ports detected
[ 6.403492] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 6.403508] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[ 6.403589] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 6.403601] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.403613] usb usb4: Product: xHCI Host Controller
[ 6.403621] usb usb4: Manufacturer: Linux 4.0.6+ xhci-hcd
[ 6.403631] usb usb4: SerialNumber: 0000:05:00.0
[ 6.403912] hub 4-0:1.0: USB hub found
[ 6.403933] hub 4-0:1.0: 2 ports detected
[ 6.607176] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 6.607189] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 54:04:a6:3c:ae:df
[ 6.607201] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 6.607265] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 6.607577] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 6.607597] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
[ 6.607626] ehci-pci 0000:00:1a.0: debug port 2
[ 6.609010] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 6.611587] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 6.611608] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d28000
[ 6.709371] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 6.724049] usb 4-2: New USB device found, idVendor=8564, idProduct=4000
[ 6.724079] usb 4-2: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[ 6.724103] usb 4-2: Product: GL3220
[ 6.724121] usb 4-2: Manufacturer: Genesys
[ 6.724128] usb 4-2: SerialNumber: 000001272
[ 6.727104] usb-storage 4-2:1.0: USB Mass Storage device detected
[ 6.727230] usb-storage 4-2:1.0: Quirks match for vid 8564 pid 4000: 4000
[ 6.727268] scsi host10: usb-storage 4-2:1.0
[ 6.727404] usbcore: registered new interface driver usb-storage
[ 6.727858] usbcore: registered new interface driver uas
[ 6.755524] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 6.761486] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.761884] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.761896] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.761908] usb usb5: Product: EHCI Host Controller
[ 6.761916] usb usb5: Manufacturer: Linux 4.0.6+ ehci_hcd
[ 6.761925] usb usb5: SerialNumber: 0000:00:1a.0
[ 6.762224] hub 5-0:1.0: USB hub found
[ 6.762250] hub 5-0:1.0: 2 ports detected
[ 6.762903] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 6.762921] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 6.762946] ehci-pci 0000:00:1d.0: debug port 2
[ 6.766858] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 6.766884] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d27000
[ 6.920305] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.920421] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.920433] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.920444] usb usb6: Product: EHCI Host Controller
[ 6.920452] usb usb6: Manufacturer: Linux 4.0.6+ ehci_hcd
[ 6.920461] usb usb6: SerialNumber: 0000:00:1d.0
[ 6.920764] hub 6-0:1.0: USB hub found
[ 6.920782] hub 6-0:1.0: 2 ports detected
[ 6.932282] usb 3-1: New USB device found, idVendor=12d1, idProduct=157d
[ 6.932298] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.932310] usb 3-1: Product: HUAWEI_MOBILE
[ 6.932318] usb 3-1: Manufacturer: HUAWEI_MOBILE
[ 6.932326] usb 3-1: SerialNumber: 0123456789ABCDEF
[ 6.958933] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 6.959121] scsi host11: usb-storage 3-1:1.0
[ 7.065218] usb 5-1: new high-speed USB device number 2 using ehci-pci
[ 7.179885] usb 5-1: New USB device found, idVendor=8087, idProduct=0024
[ 7.179898] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.180327] hub 5-1:1.0: USB hub found
[ 7.180408] hub 5-1:1.0: 6 ports detected
[ 7.222072] usb 6-1: new high-speed USB device number 2 using ehci-pci
[ 7.336738] usb 6-1: New USB device found, idVendor=8087, idProduct=0024
[ 7.336751] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.337095] hub 6-1:1.0: USB hub found
[ 7.337252] hub 6-1:1.0: 8 ports detected
[ 7.613799] usb 6-1.1: new full-speed USB device number 3 using ehci-pci
[ 7.701418] usb 6-1.1: New USB device found, idVendor=04d9, idProduct=fa50
[ 7.701432] usb 6-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7.701443] usb 6-1.1: Product: USB Laser Game Mouse
[ 7.709141] input: USB Laser Game Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/0003:04D9:FA50.0001/input/input6
[ 7.709372] hid-generic 0003:04D9:FA50.0001: input,hidraw0: USB HID v1.10 Mouse [USB Laser Game Mouse] on usb-0000:00:1d.0-1.1/input0
[ 7.713168] input: USB Laser Game Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/0003:04D9:FA50.0002/input/input7
[ 7.728573] scsi 10:0:0:0: Direct-Access Generic STORAGE DEVICE TS07 PQ: 0 ANSI: 0
[ 7.729093] scsi 10:0:0:1: Direct-Access Generic STORAGE DEVICE TS07 PQ: 0 ANSI: 0
[ 7.729675] scsi 10:0:0:2: Direct-Access Generic STORAGE DEVICE TS07 PQ: 0 ANSI: 0
[ 7.730289] sd 10:0:0:0: Attached scsi generic sg5 type 0
[ 7.731573] sd 10:0:0:0: [sde] Attached SCSI removable disk
[ 7.732634] sd 10:0:0:1: Attached scsi generic sg6 type 0
[ 7.735820] sd 10:0:0:1: [sdf] Attached SCSI removable disk
[ 7.737893] sd 10:0:0:2: [sdg] Attached SCSI removable disk
[ 7.738531] sd 10:0:0:2: Attached scsi generic sg7 type 0
[ 7.763868] hid-generic 0003:04D9:FA50.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Laser Game Mouse] on usb-0000:00:1d.0-1.1/input1
[ 7.775631] usb 6-1.2: new low-speed USB device number 4 using ehci-pci
[ 7.883094] usb 6-1.2: New USB device found, idVendor=04d9, idProduct=1818
[ 7.883108] usb 6-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 7.883119] usb 6-1.2: Product: USB Keyboard
[ 7.893956] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:04D9:1818.0004/input/input8
[ 7.944623] hid-generic 0003:04D9:1818.0004: input,hidraw2: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 7.961986] scsi 11:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 7.962360] scsi 11:0:0:1: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 7.963613] sr 11:0:0:0: [sr1] scsi-1 drive
[ 7.963978] sr 11:0:0:0: Attached scsi CD-ROM sr1
[ 7.964115] sr 11:0:0:0: Attached scsi generic sg8 type 5
[ 7.966197] sd 11:0:0:1: Attached scsi generic sg9 type 0
[ 7.969435] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:04D9:1818.0005/input/input9
[ 7.972569] sd 11:0:0:1: [sdh] Attached SCSI removable disk
[ 8.020526] hid-generic 0003:04D9:1818.0005: input,hidraw3: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:1d.0-1.2/input1
[ 8.093364] usb 6-1.4: new high-speed USB device number 5 using ehci-pci
[ 8.178522] usb 6-1.4: New USB device found, idVendor=0409, idProduct=005a
[ 8.178535] usb 6-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.178925] hub 6-1.4:1.0: USB hub found
[ 8.179073] hub 6-1.4:1.0: 4 ports detected
[ 8.253217] usb 6-1.6: new high-speed USB device number 6 using ehci-pci
[ 8.355397] usb 6-1.6: New USB device found, idVendor=0bda, idProduct=2838
[ 8.355410] usb 6-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.355421] usb 6-1.6: Product: RTL2838UHIDIR
[ 8.355428] usb 6-1.6: Manufacturer: Realtek
[ 8.355435] usb 6-1.6: SerialNumber: 00000001
[ 8.437037] usb 6-1.7: new full-speed USB device number 7 using ehci-pci
[ 8.523987] usb 6-1.7: New USB device found, idVendor=0cf3, idProduct=3000
[ 8.525036] usb 6-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 13.593428] input: USB Laser Game Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.2/0003:04D9:FA50.0003/input/input10
[ 13.645532] hid-generic 0003:04D9:FA50.0003: input,hiddev0,hidraw4: USB HID v1.10 Device [USB Laser Game Mouse] on usb-0000:00:1d.0-1.1/input2
[ 13.646748] usbcore: registered new interface driver usbhid
[ 13.647930] usbhid: USB HID core driver
[ 46.225306] random: random_reseed() reseeds=5 pool0_len=582
[ 71.716746] NET: Registered protocol family 38
[ 72.198371] audit_printk_skb: 9 callbacks suppressed
[ 72.199587] audit: type=1130 audit(1435075062.043:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-cryptsetup@luks\x2dbea602e1\x2dd47d\x2d4d88\x2da16a\x2d1b06543077eb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 72.203746] audit: type=1130 audit(1435075062.048:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 72.223833] audit: type=1130 audit(1435075062.069:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 72.230453] audit: type=1130 audit(1435075062.075:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-mapper-luks\x2dbea602e1\x2dd47d\x2d4d88\x2da16a\x2d1b06543077eb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 72.236803] XFS (dm-0): Mounting V4 Filesystem
[ 72.368162] XFS (dm-0): Ending clean mount
[ 72.501681] audit: type=1130 audit(1435075062.347:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 72.503024] audit: type=1131 audit(1435075062.348:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 72.728488] audit: type=1130 audit(1435075062.574:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 72.741991] audit: type=1130 audit(1435075062.587:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-ask-password-console comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 72.743445] audit: type=1131 audit(1435075062.589:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-ask-password-console comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 72.746728] audit: type=1130 audit(1435075062.592:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 72.927418] systemd-journald[1372]: Received SIGTERM from PID 1 (systemd).
[ 74.240234] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 74.241545] systemd[1]: Inserted module 'ip_tables'
[ 77.837006] systemd-sysv-generator[2857]: Configuration file /usr/lib/systemd/system/3proxy.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 78.376527] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/grsec.txt.service with real service
[ 78.377841] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/mysql-proxy.service with real service
[ 78.379089] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/tux.bak.service with real service
[ 78.380388] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/xttpd.service with real service
[ 78.381668] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/globus-gridftp-sshftp.service with real service
[ 78.382914] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/globus-gatekeeper.service with real service
[ 78.384222] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb-2.6.27.service with real service
[ 78.385499] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb.localnet.service with real service
[ 78.386794] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb-nohyst.service with real service
[ 78.388071] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/monotone.service with real service
[ 78.389360] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb-2.6.25.service with real service
[ 78.390636] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/smsd.service with real service
[ 78.391907] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/perlbal.service with real service
[ 78.393182] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/voms.service with real service
[ 78.394440] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/qmail.bak.service with real service
[ 78.395701] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/grsec.service with real service
[ 78.396941] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/opentracker-ipv6.service with real service
[ 78.398205] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/shmpps.service with real service
[ 78.399451] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb-100Mbps.service with real service
[ 78.400698] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb.init.service with real service
[ 78.401960] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb.service with real service
[ 78.403207] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb-ctconn.service with real service
[ 78.404467] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/mdns.service with real service
[ 78.405716] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb.sauna.service with real service
[ 78.406977] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/isicom.service with real service
[ 78.408226] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/tbf.service with real service
[ 78.409454] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/netconsole.service with real service
[ 78.410696] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb.ipy.service with real service
[ 78.411923] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/alsasound.service with real service
[ 78.413162] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/ceph-radosgw.service with real service
[ 78.414380] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/cbq.service with real service
[ 78.415591] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/alsa.service with real service
[ 78.416876] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/sysklogd.service with real service
[ 78.418118] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb.dns.service with real service
[ 78.419334] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/spawn-fcgi.service with real service
[ 78.420534] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/hfsc.service with real service
[ 78.421733] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb-safarisfq.service with real service
[ 78.422938] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb.20120530.service with real service
[ 78.424127] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/gearmand.service with real service
[ 78.425318] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb-simple.service with real service
[ 78.426485] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/powerman.service with real service
[ 78.427654] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/bayonne.service with real service
[ 78.428838] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/systemtap.service with real service
[ 78.430028] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/dpm-gsiftp.service with real service
[ 78.431209] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/rootd.service with real service
[ 78.432373] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/fcron.service with real service
[ 78.433530] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/ntpd.orig.service with real service
[ 78.434707] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/fcron_watch_config.service with real service
[ 78.435865] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/dahdi.service with real service
[ 78.437041] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb.codel.ok.service with real service
[ 78.438201] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/squid.service with real service
[ 78.439374] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/qmail.service with real service
[ 78.440542] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/opentracker-ipv4.service with real service
[ 78.441694] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb.512kbps.service with real service
[ 78.442846] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/globus-gridftp-server.service with real service
[ 78.444005] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/network.service with real service
[ 78.445161] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/rbdmap.service with real service
[ 78.446308] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/pcmcia.N.service with real service
[ 78.447436] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/i8k.service with real service
[ 78.448560] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/ntpd.bak.service with real service
[ 78.449696] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/globus-scheduler-event-generator.service with real service
[ 78.450820] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/djb.service with real service
[ 78.451959] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/ceph.service with real service
[ 78.453063] systemd-sysv-generator[2857]: Overwriting existing symlink /run/systemd/generator.late/htb-stop.service with real service
[ 79.988792] audit_printk_skb: 78 callbacks suppressed
[ 79.989860] audit: type=1130 audit(1435075069.841:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 79.990978] audit: type=1131 audit(1435075069.844:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 79.993646] audit: type=1130 audit(1435075069.846:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 79.994777] audit: type=1131 audit(1435075069.847:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 80.281176] audit: type=1130 audit(1435075070.133:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 80.282293] audit: type=1131 audit(1435075070.135:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 80.513171] audit: type=1130 audit(1435075070.366:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-mapper-luks\x2dbea602e1\x2dd47d\x2d4d88\x2da16a\x2d1b06543077eb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 80.515381] audit: type=1131 audit(1435075070.369:57): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-mapper-luks\x2dbea602e1\x2dd47d\x2d4d88\x2da16a\x2d1b06543077eb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 80.521379] audit: type=1130 audit(1435075070.374:58): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-cryptsetup@luks\x2dbea602e1\x2dd47d\x2d4d88\x2da16a\x2d1b06543077eb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 80.523606] audit: type=1131 audit(1435075070.377:59): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-cryptsetup@luks\x2dbea602e1\x2dd47d\x2d4d88\x2da16a\x2d1b06543077eb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 82.850087] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 87.862480] audit_printk_skb: 33 callbacks suppressed
[ 87.863677] audit: type=1130 audit(1435075077.722:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 88.104711] audit: type=1130 audit(1435075077.964:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 88.268401] audit: type=1130 audit(1435075078.128:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 88.636982] systemd-journald[2874]: Received request to flush runtime journal from PID 1
[ 90.075220] usb 6-1.4.1: new high-speed USB device number 8 using ehci-pci
[ 90.162790] usb 6-1.4.1: New USB device found, idVendor=18d1, idProduct=4ee7
[ 90.164086] usb 6-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 90.165359] usb 6-1.4.1: Product: XT1068
[ 90.166652] usb 6-1.4.1: Manufacturer: motorola
[ 90.167936] usb 6-1.4.1: SerialNumber: ZX1D22GKJS
[ 90.655048] audit: type=1130 audit(1435075080.517:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 90.893180] TCP: cubic registered
[ 92.049020] audit: type=1130 audit(1435075081.912:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 96.687602] audit: type=1130 audit(1435075086.555:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 96.970308] rtc_cmos 00:02: RTC can wake from S4
[ 96.970568] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 96.970607] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 97.130673] audit: type=1130 audit(1435075086.999:77): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:acpi_video0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 97.369520] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150204/utaddress-254)
[ 97.369525] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 97.369529] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254)
[ 97.369532] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPCB.GPBX) (20150204/utaddress-254)
[ 97.369534] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 97.369535] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254)
[ 97.369537] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPCB.GPBX) (20150204/utaddress-254)
[ 97.369540] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 97.369541] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150204/utaddress-254)
[ 97.369543] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPCB.GPBX) (20150204/utaddress-254)
[ 97.369545] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 97.369546] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 97.450825] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
[ 97.450831] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 98.042173] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 99.923524] sr 11:0:0:0: [sr1] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 99.923528] sr 11:0:0:0: [sr1] Sense Key : Medium Error [current]
[ 99.923530] sr 11:0:0:0: [sr1] Add. Sense: Unrecovered read error
[ 99.923533] sr 11:0:0:0: [sr1] CDB: Read(10) 28 00 00 00 0f fe 00 00 02 00
[ 99.923545] blk_update_request: critical medium error, dev sr1, sector 16376
[ 99.928483] sr 11:0:0:0: [sr1] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 99.928488] sr 11:0:0:0: [sr1] Sense Key : Medium Error [current]
[ 99.928491] sr 11:0:0:0: [sr1] Add. Sense: Unrecovered read error
[ 99.928502] sr 11:0:0:0: [sr1] CDB: Read(10) 28 00 00 00 0f fe 00 00 02 00
[ 99.928503] blk_update_request: critical medium error, dev sr1, sector 16376
[ 99.928516] Buffer I/O error on dev sr1, logical block 2047, async page read
[ 100.460799] XFS (sdc1): Mounting V4 Filesystem
[ 100.684733] XFS (sdc1): Ending clean mount
[ 101.471050] usb 6-1.6: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
[ 101.518686] iTCO_vendor_support: vendor-support=0
[ 101.528336] usb 6-1.6: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 101.528394] DVB: registering new adapter (Realtek RTL2832U reference design)
[ 101.530225] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 101.530271] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 101.530505] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 101.755078] sound hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 101.755081] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 101.755082] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 101.755083] sound hdaudioC0D0: mono: mono_out=0x0
[ 101.755084] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 101.755085] sound hdaudioC0D0: inputs:
[ 101.755088] sound hdaudioC0D0: Front Mic=0x19
[ 101.755090] sound hdaudioC0D0: Rear Mic=0x18
[ 101.755091] sound hdaudioC0D0: Line=0x1a
[ 101.977908] i2c i2c-9: Added multiplexed i2c bus 10
[ 101.977910] rtl2832 9-0010: Realtek RTL2832 successfully attached
[ 101.977941] usb 6-1.6: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 102.012623] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 102.012850] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 102.012958] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 102.013058] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 102.013155] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 102.013251] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 102.013347] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 102.013444] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 102.013541] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 102.218472] r820t 10-001a: creating new instance
[ 102.218809] XFS (sdd2): Mounting V4 Filesystem
[ 102.230195] r820t 10-001a: Rafael Micro r820t successfully identified
[ 102.591493] asus_wmi: ASUS WMI generic driver loaded
[ 102.790314] asus_wmi: Initialization: 0x0
[ 102.790349] asus_wmi: BIOS WMI version: 0.9
[ 102.790413] asus_wmi: SFUN value: 0x0
[ 102.790877] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input21
[ 102.791974] asus_wmi: Disabling ACPI video driver
[ 103.165080] media: Linux media interface: v0.10
[ 103.842528] Linux video capture interface: v2.00
[ 103.909797] Bluetooth: Core ver 2.20
[ 103.909821] NET: Registered protocol family 31
[ 103.909822] Bluetooth: HCI device and connection manager initialized
[ 103.909893] Bluetooth: HCI socket layer initialized
[ 103.909896] Bluetooth: L2CAP socket layer initialized
[ 103.909907] Bluetooth: SCO socket layer initialized
[ 104.024869] rtl2832_sdr rtl2832_sdr.0.auto: Registered as swradio0
[ 104.024872] rtl2832_sdr rtl2832_sdr.0.auto: Realtek RTL2832 SDR attached
[ 104.024873] rtl2832_sdr rtl2832_sdr.0.auto: SDR API is still slightly experimental and functionality changes may follow
[ 104.032043] Registered IR keymap rc-empty
[ 104.032242] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.6/rc/rc0/input22
[ 104.032322] rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.6/rc/rc0
[ 104.035883] usb 6-1.6: dvb_usb_v2: schedule remote query interval to 400 msecs
[ 104.044055] usb 6-1.6: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
[ 104.044158] usbcore: registered new interface driver dvb_usb_rtl28xxu
[ 104.208611] IR RC5(x/sz) protocol handler initialized
[ 104.218879] IR NEC protocol handler initialized
[ 104.228405] IR RC6 protocol handler initialized
[ 104.235111] IR JVC protocol handler initialized
[ 104.242074] IR Sony protocol handler initialized
[ 104.254580] IR SANYO protocol handler initialized
[ 104.266595] IR Sharp protocol handler initialized
[ 104.276930] lirc_dev: IR Remote Control driver registered, major 244
[ 104.281895] rc rc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
[ 104.281897] IR LIRC bridge handler initialized
[ 104.295201] IR XMP protocol handler initialized
[ 104.296554] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input23
[ 104.296840] IR MCE Keyboard/mouse protocol handler initialized
[ 104.379081] XFS (sdd2): Ending clean mount
[ 104.392698] usbcore: registered new interface driver ath3k
[ 104.468314] usb 6-1.7: USB disconnect, device number 7
[ 104.996929] audit: type=1130 audit(1435075094.872:78): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 104.996964] audit: type=1131 audit(1435075094.873:79): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 105.020478] audit: type=1130 audit(1435075094.896:80): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 105.101990] audit: type=1130 audit(1435075094.978:81): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=fedora-autorelabel-mark comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 105.103808] audit: type=1130 audit(1435075094.979:82): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 105.129403] audit: type=1130 audit(1435075095.005:83): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 105.165376] audit: type=1130 audit(1435075095.041:84): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 105.667415] usb 6-1.7: new full-speed USB device number 9 using ehci-pci
[ 105.753396] usb 6-1.7: New USB device found, idVendor=0b05, idProduct=179c
[ 105.753402] usb 6-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 106.112576] audit: type=1130 audit(1435075095.989:85): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 106.234641] usbcore: registered new interface driver btusb
[ 106.376744] audit: type=1130 audit(1435075096.254:86): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 106.376760] audit: type=1131 audit(1435075096.254:87): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 106.760927] usb 3-1: usbfs: interface 0 claimed by usb-storage while 'usb_modeswitch' sets config #2
[ 107.100269] usb-storage 3-1:2.2: USB Mass Storage device detected
[ 107.100481] scsi host12: usb-storage 3-1:2.2
[ 108.104897] scsi 12:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
[ 108.105620] sd 12:0:0:0: Attached scsi generic sg8 type 0
[ 108.107186] sd 12:0:0:0: [sdh] Attached SCSI removable disk
[ 139.007071] audit_printk_skb: 13 callbacks suppressed
[ 139.007073] audit: type=1130 audit(1435075128.915:92): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 139.092268] audit: type=1130 audit(1435075129.000:93): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 139.099888] audit: type=1130 audit(1435075129.008:94): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 139.676038] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 139.798877] audit: type=1325 audit(1435075129.705:95): table=filter family=10 entries=0
[ 139.798955] audit: type=1300 audit(1435075129.705:95): arch=c000003e syscall=313 success=yes exit=0 a0=0 a1=41a2dc a2=0 a3=0 items=0 ppid=4424 pid=4425 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
[ 139.798963] audit: type=1327 audit(1435075129.705:95): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D006970367461626C655F66696C746572
[ 140.006735] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 140.682714] audit: type=1325 audit(1435075130.164:96): table=filter family=10 entries=4
[ 140.682743] audit: type=1300 audit(1435075130.164:96): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=29 a2=40 a3=11beac0 items=0 ppid=4409 pid=4421 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip6tables-resto" exe="/usr/sbin/xtables-multi" key=(null)
[ 140.682751] audit: type=1327 audit(1435075130.164:96): proctitle=6970367461626C65732D726573746F7265002F6574632F737973636F6E6669672F6970367461626C6573
[ 141.742196] audit: type=1130 audit(1435075131.652:97): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 143.155938] w83627ehf: Found NCT6776F chip at 0x290
[ 143.290711] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 143.290713] Bluetooth: BNEP filters: protocol multicast
[ 143.290719] Bluetooth: BNEP socket layer initialized
[ 144.097066] audit_printk_skb: 30 callbacks suppressed
[ 144.097067] audit: type=1325 audit(1435075134.009:108): table=filter family=10 entries=0
[ 144.097627] audit: type=1300 audit(1435075134.009:108): arch=c000003e syscall=272 success=yes exit=0 a0=40000000 a1=7ffd57224e50 a2=40000040 a3=7fac34214e00 items=0 ppid=1 pid=4536 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="(ostnamed)" exe="/usr/lib/systemd/systemd" key=(null)
[ 144.097635] audit: type=1327 audit(1435075134.009:108): proctitle="(ostnamed)"
[ 144.099332] audit: type=1130 audit(1435075134.012:109): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=chronyd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 144.100962] audit: type=1130 audit(1435075134.013:110): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lm_sensors comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 144.212222] audit: type=1130 audit(1435075134.125:111): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=console-kit-log-system-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 144.319203] audit: type=1130 audit(1435075134.232:112): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mcelog comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 144.436917] audit: type=1130 audit(1435075134.350:113): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 144.538722] audit: type=1130 audit(1435075134.452:114): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=gssproxy comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 144.952639] audit: type=1130 audit(1435075134.866:115): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ModemManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 146.318409] Process accounting resumed
[ 156.107918] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 156.361770] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 156.364545] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 156.367597] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 163.186207] cfg80211: Calling CRDA to update world regulatory domain
[ 163.380493] cfg80211: World regulatory domain updated:
[ 163.380495] cfg80211: DFS Master region: unset
[ 163.380496] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 163.380498] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 163.380499] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 163.380500] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 163.380502] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 163.380503] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 163.380504] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 163.380506] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 163.380507] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 165.052264] ata3.00: configured for UDMA/133
[ 165.052271] ata3: EH complete
[ 165.052551] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 165.056192] ata4.00: configured for UDMA/133
[ 165.056195] ata4: EH complete
[ 165.056311] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 165.161503] ata5.00: configured for UDMA/133
[ 165.161511] ata5: EH complete
[ 165.161696] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 165.384165] ata10.00: configured for UDMA/133
[ 165.384173] ata10: EH complete
[ 165.482110] sd 9:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 165.543200] arp_tables: (C) 2002 David S. Miller
[ 180.982194] Ebtables v2.0 registered
[ 221.910060] fuse init (API version 7.23)
[ 245.146504] Bluetooth: RFCOMM TTY layer initialized
[ 245.146514] Bluetooth: RFCOMM socket layer initialized
[ 245.146521] Bluetooth: RFCOMM ver 1.11
[ 269.176765] XFS (dm-1): Mounting V4 Filesystem
[ 269.340001] XFS (dm-1): Ending clean mount
[ 270.356397] XFS (dm-2): Mounting V4 Filesystem
[ 270.496583] ata4.00: exception Emask 0x60 SAct 0xe000 SErr 0x800 action 0x6 frozen
[ 270.496586] ata4.00: irq_stat 0x20000000, host bus error
[ 270.496587] ata4: SError: { HostInt }
[ 270.496589] ata4.00: failed command: WRITE FPDMA QUEUED
[ 270.496592] ata4.00: cmd 61/40:68:30:9d:43/05:00:25:00:00/40 tag 13 ncq 688128 out
res 40/00:7c:d8:a9:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 270.496594] ata4.00: status: { DRDY }
[ 270.496595] ata4.00: failed command: WRITE FPDMA QUEUED
[ 270.496597] ata4.00: cmd 61/68:70:70:a2:43/07:00:25:00:00/40 tag 14 ncq 970752 out
res 40/00:7c:d8:a9:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 270.496599] ata4.00: status: { DRDY }
[ 270.496600] ata4.00: failed command: WRITE FPDMA QUEUED
[ 270.496602] ata4.00: cmd 61/58:78:d8:a9:43/03:00:25:00:00/40 tag 15 ncq 438272 out
res 40/00:7c:d8:a9:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 270.496604] ata4.00: status: { DRDY }
[ 270.496606] ata4: hard resetting link
[ 270.801290] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 270.801947] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 270.801952] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 270.803172] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 270.803177] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 270.803352] ata4.00: configured for UDMA/133
[ 270.803365] ata4: EH complete
[ 270.818274] ata4.00: exception Emask 0x60 SAct 0xe0000 SErr 0x800 action 0x6 frozen
[ 270.818276] ata4.00: irq_stat 0x20000000, host bus error
[ 270.818278] ata4: SError: { HostInt }
[ 270.818280] ata4.00: failed command: WRITE FPDMA QUEUED
[ 270.818283] ata4.00: cmd 61/58:88:d8:a9:43/03:00:25:00:00/40 tag 17 ncq 438272 out
res 40/00:9c:30:9d:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 270.818284] ata4.00: status: { DRDY }
[ 270.818285] ata4.00: failed command: WRITE FPDMA QUEUED
[ 270.818288] ata4.00: cmd 61/68:90:70:a2:43/07:00:25:00:00/40 tag 18 ncq 970752 out
res 40/00:9c:30:9d:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 270.818289] ata4.00: status: { DRDY }
[ 270.818290] ata4.00: failed command: WRITE FPDMA QUEUED
[ 270.818293] ata4.00: cmd 61/40:98:30:9d:43/05:00:25:00:00/40 tag 19 ncq 688128 out
res 40/00:9c:30:9d:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 270.818294] ata4.00: status: { DRDY }
[ 270.818296] ata4: hard resetting link
[ 271.122988] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 271.123614] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 271.123619] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 271.124481] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 271.124486] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 271.125535] ata4.00: configured for UDMA/133
[ 271.125547] ata4: EH complete
[ 271.140972] ata4.00: exception Emask 0x60 SAct 0x40000003 SErr 0x800 action 0x6 frozen
[ 271.140975] ata4.00: irq_stat 0x20000000, host bus error
[ 271.140977] ata4: SError: { HostInt }
[ 271.140979] ata4.00: failed command: WRITE FPDMA QUEUED
[ 271.140982] ata4.00: cmd 61/68:00:70:a2:43/07:00:25:00:00/40 tag 0 ncq 970752 out
res 40/00:0c:d8:a9:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 271.140983] ata4.00: status: { DRDY }
[ 271.140984] ata4.00: failed command: WRITE FPDMA QUEUED
[ 271.140987] ata4.00: cmd 61/58:08:d8:a9:43/03:00:25:00:00/40 tag 1 ncq 438272 out
res 40/00:0c:d8:a9:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 271.140988] ata4.00: status: { DRDY }
[ 271.140990] ata4.00: failed command: WRITE FPDMA QUEUED
[ 271.140992] ata4.00: cmd 61/40:f0:30:9d:43/05:00:25:00:00/40 tag 30 ncq 688128 out
res 40/00:0c:d8:a9:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 271.140993] ata4.00: status: { DRDY }
[ 271.140996] ata4: hard resetting link
[ 271.445679] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 271.446294] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 271.446298] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 271.447169] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 271.447173] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040dcba690), AE_NOT_FOUND (20150204/psparse-536)
[ 271.447343] ata4.00: configured for UDMA/133
[ 271.447356] ata4: EH complete
[ 271.502359] XFS (dm-2): Ending clean mount
[ 271.945311] do_general_protection: 27 callbacks suppressed
[ 271.945314] traps: xfdesktop[5688] general protection ip:4312a8 sp:7fff70b8b670 error:0 in xfdesktop[400000+57000]
[ 276.050009] XFS (dm-1): Mounting V4 Filesystem
[ 276.187200] ata3.00: exception Emask 0x60 SAct 0x3800000 SErr 0x800 action 0x6 frozen
[ 276.187202] ata3.00: irq_stat 0x20000000, host bus error
[ 276.187204] ata3: SError: { HostInt }
[ 276.187206] ata3.00: failed command: WRITE FPDMA QUEUED
[ 276.187209] ata3.00: cmd 61/60:b8:58:db:43/05:00:25:00:00/40 tag 23 ncq 704512 out
res 40/00:cc:b8:e8:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 276.187211] ata3.00: status: { DRDY }
[ 276.187212] ata3.00: failed command: WRITE FPDMA QUEUED
[ 276.187214] ata3.00: cmd 61/00:c0:b8:e0:43/08:00:25:00:00/40 tag 24 ncq 1048576 out
res 40/00:cc:b8:e8:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 276.187216] ata3.00: status: { DRDY }
[ 276.187217] ata3.00: failed command: WRITE FPDMA QUEUED
[ 276.187219] ata3.00: cmd 61/a0:c8:b8:e8:43/02:00:25:00:00/40 tag 25 ncq 344064 out
res 40/00:cc:b8:e8:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 276.187221] ata3.00: status: { DRDY }
[ 276.187224] ata3: hard resetting link
[ 276.491908] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 276.492527] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 276.492531] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 276.493345] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 276.493350] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 276.493525] ata3.00: configured for UDMA/133
[ 276.493538] ata3: EH complete
[ 276.507893] ata3.00: exception Emask 0x60 SAct 0x38000000 SErr 0x800 action 0x6 frozen
[ 276.507895] ata3.00: irq_stat 0x20000000, host bus error
[ 276.507897] ata3: SError: { HostInt }
[ 276.507899] ata3.00: failed command: WRITE FPDMA QUEUED
[ 276.507902] ata3.00: cmd 61/a0:d8:b8:e8:43/02:00:25:00:00/40 tag 27 ncq 344064 out
res 40/00:ec:58:db:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 276.507903] ata3.00: status: { DRDY }
[ 276.507905] ata3.00: failed command: WRITE FPDMA QUEUED
[ 276.507907] ata3.00: cmd 61/00:e0:b8:e0:43/08:00:25:00:00/40 tag 28 ncq 1048576 out
res 40/00:ec:58:db:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 276.507909] ata3.00: status: { DRDY }
[ 276.507910] ata3.00: failed command: WRITE FPDMA QUEUED
[ 276.507912] ata3.00: cmd 61/60:e8:58:db:43/05:00:25:00:00/40 tag 29 ncq 704512 out
res 40/00:ec:58:db:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 276.507913] ata3.00: status: { DRDY }
[ 276.507916] ata3: hard resetting link
[ 276.812604] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 276.813217] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 276.813222] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 276.814045] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 276.814050] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 276.814236] ata3.00: configured for UDMA/133
[ 276.814250] ata3: EH complete
[ 276.826591] ata3.00: exception Emask 0x60 SAct 0xe00 SErr 0x800 action 0x6 frozen
[ 276.826593] ata3.00: irq_stat 0x20000000, host bus error
[ 276.826595] ata3: SError: { HostInt }
[ 276.826596] ata3.00: failed command: WRITE FPDMA QUEUED
[ 276.826599] ata3.00: cmd 61/60:48:58:db:43/05:00:25:00:00/40 tag 9 ncq 704512 out
res 40/00:5c:b8:e8:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 276.826601] ata3.00: status: { DRDY }
[ 276.826602] ata3.00: failed command: WRITE FPDMA QUEUED
[ 276.826605] ata3.00: cmd 61/00:50:b8:e0:43/08:00:25:00:00/40 tag 10 ncq 1048576 out
res 40/00:5c:b8:e8:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 276.826606] ata3.00: status: { DRDY }
[ 276.826607] ata3.00: failed command: WRITE FPDMA QUEUED
[ 276.826610] ata3.00: cmd 61/a0:58:b8:e8:43/02:00:25:00:00/40 tag 11 ncq 344064 out
res 40/00:5c:b8:e8:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 276.826611] ata3.00: status: { DRDY }
[ 276.826613] ata3: hard resetting link
[ 277.131300] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 277.131918] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 277.131922] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 277.132795] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 277.132799] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 277.133652] ata3.00: configured for UDMA/133
[ 277.133665] ata3: EH complete
[ 277.148286] ata3.00: exception Emask 0x60 SAct 0x1c00000 SErr 0x800 action 0x6 frozen
[ 277.148288] ata3.00: irq_stat 0x20000000, host bus error
[ 277.148290] ata3: SError: { HostInt }
[ 277.148291] ata3.00: failed command: WRITE FPDMA QUEUED
[ 277.148294] ata3.00: cmd 61/a0:b0:b8:e8:43/02:00:25:00:00/40 tag 22 ncq 344064 out
res 40/00:c4:58:db:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 277.148296] ata3.00: status: { DRDY }
[ 277.148297] ata3.00: failed command: WRITE FPDMA QUEUED
[ 277.148300] ata3.00: cmd 61/00:b8:b8:e0:43/08:00:25:00:00/40 tag 23 ncq 1048576 out
res 40/00:c4:58:db:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 277.148301] ata3.00: status: { DRDY }
[ 277.148302] ata3.00: failed command: WRITE FPDMA QUEUED
[ 277.148305] ata3.00: cmd 61/60:c0:58:db:43/05:00:25:00:00/40 tag 24 ncq 704512 out
res 40/00:c4:58:db:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 277.148306] ata3.00: status: { DRDY }
[ 277.148308] ata3: hard resetting link
[ 277.452994] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 277.453608] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 277.453613] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 277.454422] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 277.454426] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 277.454605] ata3.00: configured for UDMA/133
[ 277.454619] ata3: EH complete
[ 277.466985] ata3.00: exception Emask 0x60 SAct 0x70 SErr 0x800 action 0x6 frozen
[ 277.466987] ata3.00: irq_stat 0x20000000, host bus error
[ 277.466989] ata3: SError: { HostInt }
[ 277.466990] ata3.00: failed command: WRITE FPDMA QUEUED
[ 277.466993] ata3.00: cmd 61/60:20:58:db:43/05:00:25:00:00/40 tag 4 ncq 704512 out
res 40/00:34:b8:e8:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 277.466995] ata3.00: status: { DRDY }
[ 277.466996] ata3.00: failed command: WRITE FPDMA QUEUED
[ 277.466999] ata3.00: cmd 61/00:28:b8:e0:43/08:00:25:00:00/40 tag 5 ncq 1048576 out
res 40/00:34:b8:e8:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 277.467000] ata3.00: status: { DRDY }
[ 277.467001] ata3.00: failed command: WRITE FPDMA QUEUED
[ 277.467003] ata3.00: cmd 61/a0:30:b8:e8:43/02:00:25:00:00/40 tag 6 ncq 344064 out
res 40/00:34:b8:e8:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 277.467005] ata3.00: status: { DRDY }
[ 277.467007] ata3: hard resetting link
[ 277.771695] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 277.772313] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 277.772318] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 277.773136] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 277.773140] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 277.773315] ata3.00: configured for UDMA/133
[ 277.773329] ata3: EH complete
[ 277.787682] ata3.00: exception Emask 0x60 SAct 0xe0000 SErr 0x800 action 0x6 frozen
[ 277.787684] ata3.00: irq_stat 0x20000000, host bus error
[ 277.787686] ata3: SError: { HostInt }
[ 277.787688] ata3.00: failed command: WRITE FPDMA QUEUED
[ 277.787691] ata3.00: cmd 61/a0:88:b8:e8:43/02:00:25:00:00/40 tag 17 ncq 344064 out
res 40/00:9c:58:db:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 277.787692] ata3.00: status: { DRDY }
[ 277.787693] ata3.00: failed command: WRITE FPDMA QUEUED
[ 277.787696] ata3.00: cmd 61/00:90:b8:e0:43/08:00:25:00:00/40 tag 18 ncq 1048576 out
res 40/00:9c:58:db:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 277.787697] ata3.00: status: { DRDY }
[ 277.787698] ata3.00: failed command: WRITE FPDMA QUEUED
[ 277.787701] ata3.00: cmd 61/60:98:58:db:43/05:00:25:00:00/40 tag 19 ncq 704512 out
res 40/00:9c:58:db:43/00:00:25:00:00/40 Emask 0x60 (host bus error)
[ 277.787702] ata3.00: status: { DRDY }
[ 277.787704] ata3: hard resetting link
[ 278.092392] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 278.093034] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 278.093039] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 278.094396] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 278.094401] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040dcba618), AE_NOT_FOUND (20150204/psparse-536)
[ 278.094559] ata3.00: configured for UDMA/133
[ 278.094571] sd 2:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 278.094574] sd 2:0:0:0: [sda] tag#17 Sense Key : Aborted Command [current] [descriptor]
[ 278.094576] sd 2:0:0:0: [sda] tag#17 Add. Sense: No additional sense information
[ 278.094578] sd 2:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 25 43 e8 b8 00 02 a0 00
[ 278.094580] blk_update_request: I/O error, dev sda, sector 625207480
[ 278.094680] sd 2:0:0:0: [sda] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 278.094682] sd 2:0:0:0: [sda] tag#18 Sense Key : Aborted Command [current] [descriptor]
[ 278.094683] sd 2:0:0:0: [sda] tag#18 Add. Sense: No additional sense information
[ 278.094685] sd 2:0:0:0: [sda] tag#18 CDB: Write(10) 2a 00 25 43 e0 b8 00 08 00 00
[ 278.094686] blk_update_request: I/O error, dev sda, sector 625205432
[ 278.094731] sd 2:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 278.094733] sd 2:0:0:0: [sda] tag#19 Sense Key : Aborted Command [current] [descriptor]
[ 278.094734] sd 2:0:0:0: [sda] tag#19 Add. Sense: No additional sense information
[ 278.094736] sd 2:0:0:0: [sda] tag#19 CDB: Write(10) 2a 00 25 43 db 58 00 05 60 00
[ 278.094737] blk_update_request: I/O error, dev sda, sector 625204056
[ 278.094772] ata3: EH complete
[ 278.094795] XFS (dm-1): xfs_do_force_shutdown(0x1) called from line 1092 of file fs/xfs/xfs_buf.c. Return address = 0xffffffff81366cd7
[ 278.094797] XFS (dm-1): I/O Error Detected. Shutting down filesystem
[ 278.094799] XFS (dm-1): Please umount the filesystem and rectify the problem(s)
[ 278.094800] XFS (dm-1): metadata I/O error: block 0x2543c358 ("xlog_bwrite") error 5 numblks 8192
[ 278.094925] XFS (dm-1): failed to locate log tail
[ 278.094927] XFS (dm-1): log mount/recovery failed: error -5
[ 278.094965] XFS (dm-1): log mount failed
[ 279.436663] XFS (dm-2): Mounting V4 Filesystem
[ 279.603897] XFS (dm-2): Ending clean mount
[ 516.144494] XFS (dm-1): Mounting V4 Filesystem
[ 516.302218] XFS (dm-1): Ending clean mount
[ 516.858839] XFS (dm-2): Mounting V4 Filesystem
[ 517.017742] XFS (dm-2): Ending clean mount
[ 521.506007] XFS (dm-1): Mounting V4 Filesystem
[ 521.660364] XFS (dm-1): Ending clean mount
[ 522.162118] XFS (dm-2): Mounting V4 Filesystem
[ 522.320952] XFS (dm-2): Ending clean mount
[3]
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. P8P67/P8H67 Series Motherboard
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: snb_uncore
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: [88] Subsystem: ASUSTeK Computer Inc. Device 844d
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [a0] Express Root Port (Slot+), MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [140] Root Complex Link
Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: ASUSTeK Computer Inc. Device 844d
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: ASUSTeK Computer Inc. P8 series motherboard
Flags: bus master, fast devsel, latency 0, IRQ 25
Memory at f7d2c000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: mei_me
00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 05)
DeviceName: Onboard LAN
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 34
Memory at f7d00000 (32-bit, non-prefetchable) [size=128K]
Memory at f7d29000 (32-bit, non-prefetchable) [size=4K]
I/O ports at f080 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] PCI Advanced Features
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P8 series motherboard
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at f7d28000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 8410
Flags: bus master, fast devsel, latency 0, IRQ 40
Memory at f7d20000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [130] Root Complex Link
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dfb00000-dfcfffff
Prefetchable memory behind bridge: 00000000dfd00000-00000000dfefffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. P8 series motherboard
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 844d
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 19
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7b00000-f7bfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 844d
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: f7a00000-f7afffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 844d
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0, IRQ 18
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7900000-f79fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. P8 series motherboard
Capabilities: [a0] Power Management version 2
00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 19
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f7800000-f78fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. P8 series motherboard
Capabilities: [a0] Power Management version 2
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P8 series motherboard
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f7d27000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset Family LPC Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 844d
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P8 series motherboard
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 26
I/O ports at f0d0 [size=8]
I/O ports at f0c0 [size=4]
I/O ports at f0b0 [size=8]
I/O ports at f0a0 [size=4]
I/O ports at f060 [size=32]
Memory at f7d26000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. P8 series motherboard
Flags: medium devsel, IRQ 18
Memory at f7d25000 (64-bit, non-prefetchable) [size=256]
I/O ports at f040 [size=32]
Kernel modules: i2c_i801
03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. P8B WS Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f7c00000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [68] MSI-X: Enable+ Count=8 Masked-
Capabilities: [78] Power Management version 3
Capabilities: [80] Express Legacy Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
04:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 19
I/O ports at e040 [size=8]
I/O ports at e030 [size=4]
I/O ports at e020 [size=8]
I/O ports at e010 [size=4]
I/O ports at e000 [size=16]
Memory at f7b10000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at f7b00000 [disabled] [size=64K]
Capabilities: [8c] Power Management version 3
Capabilities: [50] Express Legacy Endpoint, MSI 00
Kernel driver in use: ahci
05:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. P8B WS Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f7a00000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [68] MSI-X: Enable+ Count=8 Masked-
Capabilities: [78] Power Management version 3
Capabilities: [80] Express Legacy Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
06:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 01) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0, IRQ 18
Bus: primary=06, secondary=07, subordinate=07, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7900000-f79fffff
Capabilities: [c0] Subsystem: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge
07:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Motherboard
Flags: bus master, medium devsel, latency 32, IRQ 17
Memory at f7900000 (32-bit, non-prefetchable) [size=2K]
I/O ports at d000 [size=128]
Capabilities: [50] Power Management version 2
Kernel modules: firewire_ohci
08:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 8477
Flags: bus master, fast devsel, latency 0, IRQ 27
I/O ports at c040 [size=8]
I/O ports at c030 [size=4]
I/O ports at c020 [size=8]
I/O ports at c010 [size=4]
I/O ports at c000 [size=16]
Memory at f7810000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at f7800000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: ahci
--
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
