Hi,
On 06-09-15 07:39, Yuantian Tang wrote:
Hi,
-----Original Message-----
From: Hans de Goede [mailto:hdegoede@xxxxxxxxxx]
Sent: Wednesday, September 02, 2015 4:32 PM
To: Tang Yuantian-B29983 <Yuantian.Tang@xxxxxxxxxxxxx>
Cc: tj@xxxxxxxxxx; linux-ide@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Subject: Re: [PATCH] ahci: added a new driver for supporting Freescale AHCI
sata
Hi,
On 02-09-15 04:25, Yuantian.Tang@xxxxxxxxxxxxx wrote:
From: Tang Yuantian <Yuantian.Tang@xxxxxxxxxxxxx>
Currently Freescale QorIQ series SATA is supported by ahci_platform
driver. Some SoC specific settings have been put in uboot. So whether
SATA works or not heavily depends on uboot.
This patch will add a new driver to support QorIQ sata which removes
the dependency on any other boot loader.
Freescale QorIQ series sata, like ls1021a ls2085a ls1043a, is
compatible with serial ATA 3.0 and AHCI 1.3 specification.
Signed-off-by: Yuantian Tang <Yuantian.Tang@xxxxxxxxxxxxx>
Thanks for the patch looks good overall.
You need to add a Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
(or a similar named file) documenting the compatible strings and what the
devicetree nodes should contain wrt reg, interrupts, etc.
properties. See Documentation/devicetree/bindings/ata/ahci-platform.txt
as an example.
Further comments inline.
I was about to use ahci_platform driver, so I added the bindings stuff to
Documentation/devicetree/bindings/ata/ahci-platform.txt
So I need to revert the old bingings first and then add a new one.
---
drivers/ata/Kconfig | 9 ++
drivers/ata/Makefile | 1 +
drivers/ata/ahci_platform.c | 1 -
drivers/ata/ahci_qoriq.c | 308
++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 318 insertions(+), 1 deletion(-)
create mode 100644 drivers/ata/ahci_qoriq.c
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index
15e40ee..6aaa3f8 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -175,6 +175,15 @@ config AHCI_XGENE
help
This option enables support for APM X-Gene SoC SATA host
controller.
+config AHCI_QORIQ
+ tristate "Freescale QorIQ AHCI SATA support"
+ depends on OF
+ help
+ This option enables support for the Freescale QorIQ AHCI SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index
af70919..af45eff 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o
libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o
libahci_platform.o
obj-$(CONFIG_AHCI_TEGRA) += ahci_tegra.o libahci.o
libahci_platform.o
obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o
libahci_platform.o
+obj-$(CONFIG_AHCI_QORIQ) += ahci_qoriq.o libahci.o
libahci_platform.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 1befb11..04975b8 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -76,7 +76,6 @@ static const struct of_device_id ahci_of_match[] = {
{ .compatible = "ibm,476gtr-ahci", },
{ .compatible = "snps,dwc-ahci", },
{ .compatible = "hisilicon,hisi-ahci", },
- { .compatible = "fsl,qoriq-ahci", },
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
This will break booting new kernels with old dtb files, something which in
general is considered a big non-no, I suggest adding a comment that this has
been superseded by the new ahci_qoriq.c code, and maybe add a date to
retire the compatible in say a year from now.
There is no old dtb because LS* platforms are not been upstreamed yet.
So I think we can safely replace it without breaking anything.
Ok / ACK.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
