Hi,
On Friday 29 May 2015 08:34 PM, Felipe Balbi wrote:
Hi,
On Fri, May 29, 2015 at 05:04:38PM +0530, Kishon Vijay Abraham I wrote:
Hi Felipe,
On Wednesday 27 May 2015 12:09 AM, Felipe Balbi wrote:
On Tue, May 26, 2015 at 11:37:17AM -0700, Arun Ramamurthy wrote:
Hi
On 15-05-26 07:19 AM, Felipe Balbi wrote:
HI,
On Mon, May 25, 2015 at 02:19:58PM -0700, Arun Ramamurthy wrote:
On 15-05-14 05:52 PM, Felipe Balbi wrote:
Hi,
On Wed, Apr 22, 2015 at 04:04:10PM -0700, Arun Ramamurthy wrote:
Most of the phy providers use "select" to enable GENERIC_PHY. Since select
is only recommended when the config is not visible, GENERIC_PHY is changed
an invisible option. To maintain consistency, all phy providers are changed
to "select" GENERIC_PHY and all non-phy drivers use "depends on" when the
phy framework is explicity required. USB_MUSB_OMAP2PLUS has a cyclic
dependency, so it is left as "select".
Signed-off-by: Arun Ramamurthy <arun.ramamurthy@xxxxxxxxxxxx>
---
drivers/ata/Kconfig | 1 -
drivers/media/platform/exynos4-is/Kconfig | 2 +-
drivers/phy/Kconfig | 4 ++--
drivers/usb/host/Kconfig | 4 ++--
drivers/video/fbdev/exynos/Kconfig | 2 +-
5 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5f60155..6d2e881 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -301,7 +301,6 @@ config SATA_MV
tristate "Marvell SATA support"
depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
- select GENERIC_PHY
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] PCI(-X) chips,
diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index b7b2e47..b6f3eaa 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -31,7 +31,7 @@ config VIDEO_S5P_FIMC
config VIDEO_S5P_MIPI_CSIS
tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver"
depends on REGULATOR
- select GENERIC_PHY
+ depends on GENERIC_PHY
help
This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2
receiver (MIPI-CSIS) devices.
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 2962de2..edecdb1 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -5,7 +5,7 @@
menu "PHY Subsystem"
config GENERIC_PHY
- bool "PHY Core"
+ bool
help
Generic PHY support.
@@ -72,7 +72,7 @@ config PHY_MIPHY365X
config PHY_RCAR_GEN2
tristate "Renesas R-Car generation 2 USB PHY driver"
depends on ARCH_SHMOBILE
- depends on GENERIC_PHY
+ select GENERIC_PHY
so some you changed from depends to select...
help
Support for USB PHY found on Renesas R-Car generation 2 SoCs.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 5ad60e4..e2197e2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -182,7 +182,7 @@ config USB_EHCI_HCD_SPEAR
config USB_EHCI_HCD_STI
tristate "Support for ST STiHxxx on-chip EHCI USB controller"
depends on ARCH_STI && OF
- select GENERIC_PHY
+ depends on GENERIC_PHY
while others you changed from select to depends.
NAK.
Felipe, I dont understand your concern, could you please explain it more
detail? The logic behind the changes is that in cases where there was an
explicit dependency, I changed it to "depends on" and in other cases I
changed it to "selects". Thanks
Since GENERIC_PHY is visible from Kconfig, it would be much nicer to
avoid select altogether.
Felipe, after discussion with the maintainers, I have made GENERIC_PHY an
invisible option as part of this change. Thanks
Then, if the option is invisible, how can you "depend" on it ? It can
never be selected by poking around in Kconfig. IMO, it's
counterintuitive that you need to enable a PHY driver before you can see
your EHCI/OHCI/whatever controller listed in Kconfig.
If the controller requires PHY for it to be functional, it is okay to make
the controller depend on PHY IMHO. We want to try and minimize the usage of
'select' wherever possible or else 'select' is the most intuitive way. The
other option is just to leave the 'depends on' and let the user select PHY.
How can you 'depend' on something that the user can't select by
navigating through Kconfig ?
hmm... Actually it's selected when the user selects the PHY driver. Maybe we
should directly depend on the PHY driver instead of Generic PHY?
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
