Re: [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I see how it makes sense to add a tab to align with the previous line
of code, as it will always look similar in all editors, no matter how
their tab character is set up to be.
However, adding more tabs will just mess up editors that are not set
up with 8-space width tabs.

Is this a bug in checkpatch.pl, or are we saying everyone should have
their editor set to 8-spaces width tabs?

--Tomer


On Mon, Aug 3, 2015 at 11:52 AM, Sergei Shtylyov
<sergei.shtylyov@xxxxxxxxxxxxxxxxxx> wrote:
> On 08/03/2015 09:46 PM, Tomer Barletz wrote:
>
>> The variable spd0 might be used uninitialized when pdc20621_i2c_read()
>> fails.
>> This also generates a compilation warning with gcc 5.1.
>
>
>> Signed-off-by: Tomer Barletz <barletz@xxxxxxxxx>
>> ---
>>   drivers/ata/sata_sx4.c | 16 ++++++++++++----
>>   1 file changed, 12 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
>> index 3a18a8a..e1c1423 100644
>> --- a/drivers/ata/sata_sx4.c
>> +++ b/drivers/ata/sata_sx4.c
>> @@ -1238,8 +1238,12 @@ static unsigned int
>> pdc20621_prog_dimm_global(struct ata_host *host)
>>         readl(mmio + PDC_SDRAM_CONTROL);
>>
>>         /* Turn on for ECC */
>> -       pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
>> -                         PDC_DIMM_SPD_TYPE, &spd0);
>> +       if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
>> +                              PDC_DIMM_SPD_TYPE, &spd0)) {
>
>
>    That won't do, you didn't fix the indentation here.
>
>> +               printk(KERN_ERR "Failed in i2c read: device=%#x,
>> subaddr=%#x\n",
>> +                      PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
>> +               return 1;
>> +       }
>>         if (spd0 == 0x02) {
>>                 data |= (0x01 << 16);
>>                 writel(data, mmio + PDC_SDRAM_CONTROL);
>> @@ -1380,8 +1384,12 @@ static unsigned int pdc20621_dimm_init(struct
>> ata_host *host)
>>
>>         /* ECC initiliazation. */
>>
>> -       pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
>> -                         PDC_DIMM_SPD_TYPE, &spd0);
>> +       if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
>> +                              PDC_DIMM_SPD_TYPE, &spd0)) {
>
>
>    And here.
>
>> +               printk(KERN_ERR "Failed in i2c read: device=%#x,
>> subaddr=%#x\n",
>> +                      PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
>> +               return 1;
>> +       }
>>         if (spd0 == 0x02) {
>>                 void *buf;
>>                 VPRINTK("Start ECC initialization\n");
>
>
> MBR, Sergei
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux