This patch adds the support to handle HOST_IRQ_STAT as edge trigger
latch.
Signed-off-by: Suman Tripathi <stripathi@xxxxxxx>
---
drivers/ata/ahci.h | 2 ++
drivers/ata/libahci.c | 19 +++++++++++++++++++
2 files changed, 21 insertions(+)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 71262e0..2df2237 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -238,6 +238,8 @@ enum {
AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */
AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */
AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */
+ AHCI_HFLAG_EDGE_TRIG_IRQ = (1 << 19), /* HOST_IRQ_STAT behaves as
+ Edge Triggered */
/* ap->flags bits */
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 61a9c07..0e7e8b4 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1879,6 +1879,25 @@ static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance)
*/
writel(irq_stat, mmio + HOST_IRQ_STAT);
+ /*
+ * HOST_IRQ_STAT behaves as edge trigger latch. When HOST_IRQ_STAT
+ * detects a egde from PORT_IRQ_STAT, it happens to loose interrupts
+ * when interrupts are triggered from both ports. So handling of
+ * the residual interrupt is required.
+ */
+ if (hpriv->flags & AHCI_HFLAG_EDGE_TRIG_IRQ) {
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap;
+
+ ap = host->ports[i];
+ if (ap) {
+ ahci_port_intr(ap);
+ VPRINTK("Residual irq from port %u\n", i);
+ }
+ handled = 1;
+ }
+ }
+
spin_unlock(&host->lock);
VPRINTK("EXIT\n");
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
