Linux IDE Archive

• Thread Index

• [PATCH] sata_sil: disable trim
  • From: Mikulas Patocka
• Re: [v6 6/7] phy: phy_brcmstb_sata: add data for phy version
  • From: Sergei Shtylyov
• [PATCH 1/1] AHCI: Fix softreset failed issue of Port Multiplier
  • From: Xiangliang Yu
• [v6 7/7] phy: phy_brcmstb_sata: add support for MIPS-based platforms
  • From: Jaedon Shin
• [v6 6/7] phy: phy_brcmstb_sata: add data for phy version
  • From: Jaedon Shin
• [v6 5/7] phy: phy_brcmstb_sata: remove duplicate definitions
  • From: Jaedon Shin
• [v6 4/7] ata: ahci_brcmstb: remove unused definitions
  • From: Jaedon Shin
• [v6 3/7] ata: ahci_brcmstb: add a quirk for MIPS-based platforms
  • From: Jaedon Shin
• [v6 2/7] ata: ahci_brcmstb: disable NCQ for MIPS-based platforms
  • From: Jaedon Shin
• [v6 1/7] ata: ahci_brcmstb: add support for MIPS-based platforms
  • From: Jaedon Shin
• [v6 0/7] add support SATA for BMIPS_GENERIC
  • From: Jaedon Shin
• Re: [v5 0/7] add support SATA for BMIPS_GENERIC
  • From: Jaedon Shin
• Re: [v5 0/7] add support SATA for BMIPS_GENERIC
  • From: Florian Fainelli
• Re: [PATCH] ata: sata_rcar: Remove obsolete platform_device_id entries
  • From: Tejun Heo
• [PATCH] ata: sata_rcar: Remove obsolete platform_device_id entries
  • From: Geert Uytterhoeven
• Re: [PATCH] ahci: don't use MSI when PCI is disabled
  • From: Arnd Bergmann
• Re: [PATCH] ahci: don't use MSI when PCI is disabled
  • From: Dan Williams
• Re: [PATCH v1 1/2] sata_dwc_460ex: move to generic DMA driver
  • From: Måns Rullgård
• Re: [PATCH v1 1/2] sata_dwc_460ex: move to generic DMA driver
  • From: Andy Shevchenko
• [PATCH] ahci: don't use MSI when PCI is disabled
  • From: Arnd Bergmann
• Re: [PATCH v1 1/2] sata_dwc_460ex: move to generic DMA driver
  • From: Måns Rullgård
• Re: [PATCH] sata_rcar: Add compatible string for r8a7795
  • From: Tejun Heo
• Re: [PATCH RESEND v2] sata/mvebu: use #ifdef around suspend/resume code
  • From: Tejun Heo
• Re: [PATCH] sata_rcar: Add compatible string for r8a7795
  • From: Simon Horman
• [PATCH] sata_rcar: Add compatible string for r8a7795
  • From: Yoshihiro Kaneko
• Re: [v5 2/7] ata: ahci_brcmstb: add quirk for broken ncq
  • From: Brian Norris
• [PATCH RESEND v2] sata/mvebu: use #ifdef around suspend/resume code
  • From: Arnd Bergmann
• Re: [v5 7/7] phy: phy_brcmstb_sata: add support MIPS-based platforms
  • From: Kishon Vijay Abraham I
• [v5 5/7] phy: phy_brcmstb_sata: remove duplicate definitions
  • From: Jaedon Shin
• [v5 7/7] phy: phy_brcmstb_sata: add support MIPS-based platforms
  • From: Jaedon Shin
• [v5 6/7] phy: phy_brcmstb_sata: add data for phy version
  • From: Jaedon Shin
• [v5 4/7] ata: ahci_brcmstb: remove unused definitions
  • From: Jaedon Shin
• [v5 3/7] ata: ahci_brcmstb: add quirk for different phy
  • From: Jaedon Shin
• [v5 2/7] ata: ahci_brcmstb: add quirk for broken ncq
  • From: Jaedon Shin
• [v5 1/7] ata: ahci_brcmstb: add support MIPS-based platforms
  • From: Jaedon Shin
• [v5 0/7] add support SATA for BMIPS_GENERIC
  • From: Jaedon Shin
• Re: [v4 03/10] ata: ahci_brcmstb: add quirk for different phy
  • From: Tejun Heo
• Re: [v4 02/10] ata: ahci_brcmstb: add quirk for broken ncq
  • From: Tejun Heo
• RE: [PATCH] drivers: ata: Move vendor specific sata port phy oob settings to device-tree
  • From: Anurag Kumar Vulisha
• Re: [v4 02/10] ata: ahci_brcmstb: add quirk for broken ncq
  • From: Jaedon Shin
• Re: [v4 00/10] add support SATA for BMIPS_GENERIC
  • From: Brian Norris
• Re: [v4 02/10] ata: ahci_brcmstb: add quirk for broken ncq
  • From: Brian Norris
• Re: [PATCH] ahci: kill 'intr_status'
  • From: Tejun Heo
• Re: [PATCH v3 2/2] ahci: switch from 'threaded' to 'hardirq' interrupt handling
  • From: Tejun Heo
• Re: [PATCH 4/4] ahci: switch from 'threaded' to 'hardirq' interrupt handling
  • From: Dan Williams
• Re: [PATCH] Ordered SATA device IDs codename Lewisburg
  • From: Tejun Heo
• Re: [PATCH v2] ahci: Add Device ID for Intel Sunrise Point PCH
  • From: Tejun Heo
• Re: [PATCH 4/4] ahci: switch from 'threaded' to 'hardirq' interrupt handling
  • From: Tejun Heo
• Re: [PATCH v2] libata: add support for NCQ commands for SG interface
  • From: Tejun Heo
• Re: [PATCH 4/4] ahci: switch from 'threaded' to 'hardirq' interrupt handling
  • From: Mark Lord
• Re: [PATCH v2] libata: add support for NCQ commands for SG interface
  • From: Mark Lord
• [PATCH] ide: constify ide_dma_ops structures
  • From: Julia Lawall
• Re: [v4 00/10] add support SATA for BMIPS_GENERIC
  • From: Jaedon Shin
• Re: [v4 00/10] add support SATA for BMIPS_GENERIC
  • From: Florian Fainelli
• [patch] ide: silence some underflow warnings
  • From: Dan Carpenter
• Re: [PATCH] drivers: ata: Move vendor specific sata port phy oob settings to device-tree
  • From: Rob Herring
• [PATCH] drivers: ata: Move vendor specific sata port phy oob settings to device-tree
  • From: Anurag Kumar Vulisha
• [PATCH] ahci: kill 'intr_status'
  • From: Dan Williams
• [PATCH v3 2/2] ahci: switch from 'threaded' to 'hardirq' interrupt handling
  • From: Dan Williams
• [PATCH v3 1/2] ahci: per-port msix support
  • From: Dan Williams
• [PATCH v3 0/2] ahci per-port msix support
  • From: Dan Williams
• Re: [PATCH 1/8] block/genhd.c: Add error handling
  • From: Jeff Moyer
• Re: [PATCH v2] block/floppy.c: handle blk_register_region() return value
  • From: kbuild test robot
• Re: [PATCH 1/8] block/genhd.c: Add error handling
  • From: Jens Axboe
• Re: [PATCH 1/8] block/genhd.c: Add error handling
  • From: Al Viro
• [PATCH v2] block/floppy.c: handle blk_register_region() return value
  • From: Vishnu Pratap Singh
• Re: [PATCH 3/8] block/floppy.c: handle blk_register_region() return value
  • From: Grant Grundler
• Re: [PATCH] mips: sb1250_swarm_defconfig: disable IDE subsystem
  • From: Sergei Shtylyov
• Re: [PATCH] mips: sb1250_swarm_defconfig: disable IDE subsystem
  • From: Maciej W. Rozycki
• Re: [PATCH] mips: sb1250_swarm_defconfig: disable IDE subsystem
  • From: Sergei Shtylyov
• Re: [PATCH] mips: sb1250_swarm_defconfig: disable IDE subsystem
  • From: Maciej W. Rozycki
• Re: [PATCH] mips: sb1250_swarm_defconfig: disable IDE subsystem
  • From: Ralf Baechle
• Re: [PATCH] mips: sb1250_swarm_defconfig: disable IDE subsystem
  • From: Maciej W. Rozycki
• [PATCH 2/8] mmc: handle add_disk() return value
  • From: Vishnu Pratap Singh
• [PATCH 3/8] block/floppy.c: handle blk_register_region() return value
  • From: Vishnu Pratap Singh
• Re: [PATCH 5/8] zram: handle add_disk() & blk_register_region() return value
  • From: Sergey Senozhatsky
• [PATCH] Ordered SATA device IDs codename Lewisburg
  • From: Alexandra Yates
• Re: [PATCH] Intel device IDs SATA
  • From: Alexandra Yates
• [PATCH v2] ahci: Add Device ID for Intel Sunrise Point PCH
  • From: Charles_Rose
• Re: [PATCH] Intel device IDs SATA
  • From: Andy Shevchenko
• Re: [PATCH 2/8] mmc: handle add_disk() return value
  • From: Ulf Hansson
• Re: [PATCH 3/8] block/floppy.c: handle blk_register_region() return value
  • From: kbuild test robot
• [PATCH 8/8] ide/ide-probe.c: handle blk_register_region() return value
  • From: Vishnu Pratap Singh
• [PATCH 7/8] cdrom/gdrom.c: handle add_disk() return value
  • From: Vishnu Pratap Singh
• [PATCH 6/8] md/md.c: handle blk_register_region() return value
  • From: Vishnu Pratap Singh
• [PATCH 5/8] zram: handle add_disk() & blk_register_region() return value
  • From: Vishnu Pratap Singh
• [PATCH 4/8] block/loop.c: handle add_disk() & blk_register_region() return value
  • From: Vishnu Pratap Singh
• [PATCH 3/8] block/floppy.c: handle blk_register_region() return value
  • From: Vishnu Pratap Singh
• [PATCH 2/8] mmc: handle add_disk() return value
  • From: Vishnu Pratap Singh
• [PATCH 1/8] block/genhd.c: Add error handling
  • From: Vishnu Pratap Singh
• [PATCH] ahci: Add Device ID for Intel Sunrise Point PCH
  • From: Charles_Rose
• [PATCH] ahci: Add Device ID for Intel Sunrise Point PCH
  • From: Charles_Rose
• [GIT PULL] libata changes for v4.4-rc1
  • From: Tejun Heo
• Re: [PATCH v2 0/2] ahci per-port msix support
  • From: Dan Williams
• Re: [PATCH v2 0/2] ahci per-port msix support
  • From: Tejun Heo
• Re: [PATCH V2] Intel device IDs SATA
  • From: Tejun Heo
• [PATCH V2] Intel device IDs SATA
  • From: Alexandra Yates
• [GIT] IDE
  • From: David Miller
• Re: [PATCH] Intel device IDs SATA
  • From: Tejun Heo
• [PATCH] Intel device IDs SATA
  • From: Alexandra Yates
• Re: [PATCH v2] ide: pdc202xx_new: Replace timeval with ktime_t
  • From: David Miller
• Re: [PATCH v2 0/2] ahci per-port msix support
  • From: Tejun Heo
• Re: [PATCH] ahci: Add Marvell 88se91a2 device id
  • From: Johannes Thumshirn
• [PATCH v2 2/2] ahci: switch from 'threaded' to 'hardirq' interrupt handling
  • From: Dan Williams
• [PATCH v2 1/2] ahci: per-port msix support
  • From: Dan Williams
• [PATCH v2 0/2] ahci per-port msix support
  • From: Dan Williams
• Re: [v2 06/10] phy: phy_brcmstb_sata: add data for phy version
  • From: Arnd Bergmann
• Re: [PATCH 4/4] ahci: switch from 'threaded' to 'hardirq' interrupt handling
  • From: Tejun Heo
• Re: [PATCH 4/4] ahci: switch from 'threaded' to 'hardirq' interrupt handling
  • From: Dan Williams
• Re: [PATCH 3/4] ahci: per-port msix support
  • From: Dan Williams
• Re: [PATCH] ahci: Add Marvell 88se91a2 device id
  • From: Tejun Heo
• Re: [PATCH 3/4] ahci: per-port msix support
  • From: Tejun Heo
• Re: [PATCH 2/4] ahci: cleanup ahci_host_activate_multi_irqs
  • From: Tejun Heo
• Re: [PATCH 4/4] ahci: switch from 'threaded' to 'hardirq' interrupt handling
  • From: Tejun Heo
• Re: [PATCH 1/3] ahci: qoriq: Rename LS2085A SoC support code to LS2080A
  • From: Tejun Heo
• [PATCH 4/4] ahci: switch from 'threaded' to 'hardirq' interrupt handling
  • From: Dan Williams
• [PATCH 3/4] ahci: per-port msix support
  • From: Dan Williams
• [PATCH 2/4] ahci: cleanup ahci_host_activate_multi_irqs
  • From: Dan Williams
• [PATCH 1/4] ahci: ahci_host_activate: kill IRQF_SHARED
  • From: Dan Williams
• [PATCH 0/4] ahci per-port msix support
  • From: Dan Williams
• [v4 10/10] MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7362
  • From: Jaedon Shin
• [v4 09/10] MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7346
  • From: Jaedon Shin
• [v4 08/10] MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7425
  • From: Jaedon Shin
• [v4 07/10] phy: phy_brcmstb_sata: add support MIPS-based platforms
  • From: Jaedon Shin
• [v4 06/10] phy: phy_brcmstb_sata: add data for phy version
  • From: Jaedon Shin
• [v4 05/10] phy: phy_brcmstb_sata: remove duplicate definitions
  • From: Jaedon Shin
• [v4 04/10] ata: ahci_brcmstb: remove unused definitions
  • From: Jaedon Shin
• [v4 03/10] ata: ahci_brcmstb: add quirk for different phy
  • From: Jaedon Shin
• [v4 02/10] ata: ahci_brcmstb: add quirk for broken ncq
  • From: Jaedon Shin
• [v4 01/10] ata: ahci_brcmstb: add support MIPS-based platforms
  • From: Jaedon Shin
• [v4 00/10] add support SATA for BMIPS_GENERIC
  • From: Jaedon Shin
• Re: [v3 00/10] add support SATA for BMIPS_GENERIC
  • From: Jaedon Shin
• Re: [v3 08/10] MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7425
  • From: Jaedon Shin
• [v3 10/10] MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7362
  • From: Jaedon Shin
• [v3 09/10] MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7346
  • From: Jaedon Shin
• [v3 08/10] MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7425
  • From: Jaedon Shin
• [v3 07/10] phy: phy_brcmstb_sata: add support MIPS-based platforms
  • From: Jaedon Shin
• [v3 06/10] phy: phy_brcmstb_sata: add data for phy version
  • From: Jaedon Shin
• [v3 05/10] phy: phy_brcmstb_sata: remove duplicate definitions
  • From: Jaedon Shin
• [v3 04/10] ata: ahci_brcmstb: remove unused definitions
  • From: Jaedon Shin
• [v3 03/10] ata: ahci_brcmstb: add quirk for different phy
  • From: Jaedon Shin
• [v3 02/10] ata: ahci_brcmstb: add quirk for broken ncq
  • From: Jaedon Shin
• [v3 01/10] ata: ahci_brcmstb: add support MIPS-based platforms
  • From: Jaedon Shin
• [v3 00/10] add support SATA for BMIPS_GENERIC
  • From: Jaedon Shin
• [PATCH 1/3] ahci: qoriq: Rename LS2085A SoC support code to LS2080A
  • From: Tang Yuantian
• [PATCH 3/3] devicetree: bindings: Fixed a few typos
  • From: Tang Yuantian
• [PATCH 2/3] ahci: qoriq: Disable NCQ on ls2080a SoC
  • From: Tang Yuantian
• Re: [v2 07/10] phy: phy_brcmstb_sata: add support MIPS-based platforms
  • From: Rob Herring
• Re: [v2 02/10] ata: ahci_brcmstb: add support MIPS-based platforms
  • From: Brian Norris
• Re: [v2 03/10] ata: ahci_brcmstb: add quick for broken phy
  • From: Florian Fainelli
• Re: [v2 01/10] ata: ahci_brcmstb: add quick for broken ncq
  • From: Florian Fainelli
• Re: [PATCH] ahci: Add Marvell 88se91a2 device id
  • From: Johannes Thumshirn
• Re: [PATCH 00/10] add support SATA for BMIPS_GENERIC
  • From: Ralf Baechle
• Re: [v2 03/10] ata: ahci_brcmstb: add quick for broken phy
  • From: Jaedon Shin
• Re: [v2 03/10] ata: ahci_brcmstb: add quick for broken phy
  • From: Rob Herring
• Re: [PATCH] libata: enable LBA flag in taskfile for ata_scsi_pass_thru()
  • From: Vinayak Kale
• Re: [PATCH] libata: enable LBA flag in taskfile for ata_scsi_pass_thru()
  • From: Tejun Heo
• [PATCH] libata: enable LBA flag in taskfile for ata_scsi_pass_thru()
  • From: vinayak . kale
• [v2 10/10] MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7362
  • From: Jaedon Shin
• [v2 09/10] MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7346
  • From: Jaedon Shin
• [v2 08/10] MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7425
  • From: Jaedon Shin
• [v2 07/10] phy: phy_brcmstb_sata: add support MIPS-based platforms
  • From: Jaedon Shin
• [v2 06/10] phy: phy_brcmstb_sata: add data for phy version
  • From: Jaedon Shin
• [v2 05/10] phy: phy_brcmstb_sata: remove duplicate definitions
  • From: Jaedon Shin
• [v2 04/10] ata: ahci_brcmstb: remove unused definitions
  • From: Jaedon Shin
• [v2 03/10] ata: ahci_brcmstb: add quick for broken phy
  • From: Jaedon Shin
• [v2 02/10] ata: ahci_brcmstb: add support MIPS-based platforms
  • From: Jaedon Shin
• [v2 01/10] ata: ahci_brcmstb: add quick for broken ncq
  • From: Jaedon Shin
• [v2 00/10] add support SATA for BMIPS_GENERIC
  • From: Jaedon Shin
• Re: [PATCH v2] libata: add support for NCQ commands for SG interface
  • From: Vinayak Kale
• Re: [PATCH v2] libata: add support for NCQ commands for SG interface
  • From: Tejun Heo
• [PATCH v2] libata: add support for NCQ commands for SG interface
  • From: vinayak . kale
• Re: [PATCH 03/10] ata: ahci_brcmstb: add support 40nm platforms
  • From: Brian Norris
• Re: [PATCH 00/10] add support SATA for BMIPS_GENERIC
  • From: Florian Fainelli
• Re: [PATCH 00/10] add support SATA for BMIPS_GENERIC
  • From: Jaedon Shin
• Re: [PATCH 03/10] ata: ahci_brcmstb: add support 40nm platforms
  • From: Jaedon Shin
• Re: [PATCH 00/10] add support SATA for BMIPS_GENERIC
  • From: Kevin Cernekee
• Re: [PATCH 02/10] ata: ahch_brcmstb: add data for port offset
  • From: Brian Norris
• Re: [PATCH 01/10] ata: ahci_brcmstb: make the driver buildable on BMIPS_GENERIC
  • From: Brian Norris
• Re: [PATCH 03/10] ata: ahci_brcmstb: add support 40nm platforms
  • From: Brian Norris
• Re: [PATCH 04/10] phy: phy_brcmstb_sata: make the driver buildable on BMIPS_GENERIC
  • From: Brian Norris
• Re: [PATCH 06/10] phy: phy_brcmstb_sata: add data for phy offset
  • From: Brian Norris
• Re: [PATCH 07/10] phy: phy_brcmstb_sata: add support 40nm platforms
  • From: Brian Norris
• Re: [PATCH 05/10] phy: phy_brcmstb_sata: remove unused definitions
  • From: Brian Norris
• Re: [PATCH 00/10] add support SATA for BMIPS_GENERIC
  • From: Brian Norris
• Re: [PATCH] libata: add support for NCQ commands for SG interface
  • From: Vinayak Kale
• Re: [PATCH 04/10] phy: phy_brcmstb_sata: make the driver buildable on BMIPS_GENERIC
  • From: Kishon Vijay Abraham I
• Re: [PATCH] libata: add support for NCQ commands for SG interface
  • From: Tejun Heo
• Re: [PATCH 07/10] phy: phy_brcmstb_sata: add support 40nm platforms
  • From: Florian Fainelli
• Re: [PATCH 06/10] phy: phy_brcmstb_sata: add data for phy offset
  • From: Florian Fainelli
• Re: [PATCH 05/10] phy: phy_brcmstb_sata: remove unused definitions
  • From: Florian Fainelli
• Re: [PATCH 04/10] phy: phy_brcmstb_sata: make the driver buildable on BMIPS_GENERIC
  • From: Florian Fainelli
• Re: [PATCH 03/10] ata: ahci_brcmstb: add support 40nm platforms
  • From: Florian Fainelli
• Re: [PATCH 02/10] ata: ahch_brcmstb: add data for port offset
  • From: Florian Fainelli
• Re: [PATCH 01/10] ata: ahci_brcmstb: make the driver buildable on BMIPS_GENERIC
  • From: Florian Fainelli
• Re: [PATCH 00/10] add support SATA for BMIPS_GENERIC
  • From: Florian Fainelli
• Re: [PATCH 00/10] add support SATA for BMIPS_GENERIC
  • From: Tejun Heo
• [PATCH 10/10] MIPS: BMIPS: brcmstb: add SATA nodes for bcm7362
  • From: Jaedon Shin
• [PATCH 09/10] MIPS: BMIPS: brcmstb: add SATA nodes for bcm7360
  • From: Jaedon Shin
• [PATCH 08/10] MIPS: BMIPS: brcmstb: add SATA nodes for bcm7346
  • From: Jaedon Shin
• [PATCH 07/10] phy: phy_brcmstb_sata: add support 40nm platforms
  • From: Jaedon Shin
• [PATCH 06/10] phy: phy_brcmstb_sata: add data for phy offset
  • From: Jaedon Shin
• [PATCH 05/10] phy: phy_brcmstb_sata: remove unused definitions
  • From: Jaedon Shin
• [PATCH 04/10] phy: phy_brcmstb_sata: make the driver buildable on BMIPS_GENERIC
  • From: Jaedon Shin
• [PATCH 03/10] ata: ahci_brcmstb: add support 40nm platforms
  • From: Jaedon Shin
• [PATCH 02/10] ata: ahch_brcmstb: add data for port offset
  • From: Jaedon Shin
• [PATCH 01/10] ata: ahci_brcmstb: make the driver buildable on BMIPS_GENERIC
  • From: Jaedon Shin
• [PATCH 00/10] add support SATA for BMIPS_GENERIC
  • From: Jaedon Shin
• Re: [Y2038] [PATCH v2] ide: pdc202xx_new: Replace timeval with ktime_t
  • From: Arnd Bergmann
• [PATCH v2] ide: pdc202xx_new: Replace timeval with ktime_t
  • From: Amitoj Kaur Chawla
• Re: [PATCH] libata: add support for NCQ commands for SG interface
  • From: Tejun Heo
• Re: [PATCH] libata: add support for NCQ commands for SG interface
  • From: Vinayak Kale
• [PATCH] ahci: Add Marvell 88se91a2 device id
  • From: Johannes Thumshirn
• Re: [PATCH] libata: add support for NCQ commands for SG interface
  • From: Vinayak Kale
• Re: [PATCH v2] ata: ahci: find eSATA ports and flag them as removable
  • From: Mark Lord
• Re: [PATCH] libata: add support for NCQ commands for SG interface
  • From: Sergei Shtylyov
• Re: [PATCH] libata: add support for NCQ commands for SG interface
  • From: Vinayak Kale
• Re: [PATCH] libata: add support for NCQ commands for SG interface
  • From: Sergei Shtylyov
• [PATCH] libata: add support for NCQ commands for SG interface
  • From: vinayak . kale
• Re: [PATCH v2] ata: ahci: find eSATA ports and flag them as removable
  • From: Tejun Heo
• Re: [PATCH v2] ata: ahci: find eSATA ports and flag them as removable
  • From: Mark Lord
• RE: [PATCH] ahci: qoriq: Fix a compiling warning
  • From: Yuantian Tang
• Re: [PATCH] ahci: qoriq: Fix a compiling warning
  • From: Arnd Bergmann
• Re: [PATCH] ahci: qoriq: Fix a compiling warning
  • From: Tejun Heo
• Re: [PATCH] ahci: qoriq: Fix a compiling warning
  • From: Arnd Bergmann
• Re: [PATCH] ahci: qoriq: Fix a compiling warning
  • From: Tejun Heo
• [PATCH] pata_it821x: use "const char *" for string literals
  • From: Tejun Heo
• [PATCH] ata/pata_it821x: set array of const as const
  • From: LABBE Corentin
• [PATCH] ahci: qoriq: Fix a compiling warning
  • From: Tang Yuantian
• Re: [PATCH] ata: Allow drivers to build if COMPILE_TEST is enabled
  • From: kbuild test robot
• Re: [PATCH] ata: Allow drivers to build if COMPILE_TEST is enabled
  • From: kbuild test robot
• [PATCH] ata: Allow drivers to build if COMPILE_TEST is enabled
  • From: Javier Martinez Canillas
• Re: [PATCH 1/2 v2] libata: only call ->done once all per-tag ressources are released
  • From: Tejun Heo
• Re: [PATCH v2] sata/mvebu: use #ifdef around suspend/resume code
  • From: Thomas Petazzoni
• [PATCH v2] sata/mvebu: use #ifdef around suspend/resume code
  • From: Arnd Bergmann
• Re: [PATCH] sata/mvebu: use #ifdef around suspend/resume code
  • From: Arnd Bergmann
• Re: [PATCH] sata/mvebu: use #ifdef around suspend/resume code
  • From: Thomas Petazzoni
• [PATCH] sata/mvebu: use #ifdef around suspend/resume code
  • From: Arnd Bergmann
• [PATCH 1/2 v2] libata: only call ->done once all per-tag ressources are released
  • From: Christoph Hellwig
• Re: [PATCH] ata: sata_rcar: Remove obsolete platform_device_id entries
  • From: Simon Horman
• Re: [RFT PATCH] mips: lemote2f_defconfig: convert to use libata PATA drivers
  • From: Aaro Koskinen
• [PATCH] ata: sata_rcar: Remove obsolete platform_device_id entries
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] libata: only call ->done once all per-tag ressources are released
  • From: Tejun Heo
• Re: [RFT PATCH] mips: bigsur_defconfig: convert to use libata PATA drivers
  • From: Ralf Baechle
• Re: missing PCI ID refs
  • From: Bjorn Helgaas
• Kinston HyperX M.2 PCIe drives
  • From: Guillermo Amaral
• Re: [PATCH 1/2] libata: only call ->done once all per-tag ressources are released
  • From: Christoph Hellwig
• Re: [PATCH 2/2] libata: cleanup ata_scsi_qc_complete
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: only call ->done once all per-tag ressources are released
  • From: Tejun Heo
• [PATCH 1/2] libata: only call ->done once all per-tag ressources are released
  • From: Christoph Hellwig
• libata: a fix and a cleanup
  • From: Christoph Hellwig
• [PATCH 2/2] libata: cleanup ata_scsi_qc_complete
  • From: Christoph Hellwig
• Re: [PATCH v2] ata: ahci: find eSATA ports and flag them as removable
  • From: Tejun Heo
• [PATCH v2] ata: ahci: find eSATA ports and flag them as removable
  • From: Manuel Lauss
• Re: [RFC PATCH] ata: ahci: find eSATA ports and flag them as removable
  • From: Manuel Lauss
• Re: [RFC PATCH] ata: ahci: find eSATA ports and flag them as removable
  • From: Tejun Heo
• Re: [PATCH v2 03/19] libata: samsung_cf: fix handling platform_get_irq result
  • From: Tejun Heo
• Re: linux: sata_nv: adma support
  • From: Pali Rohár
• [RFC PATCH] ata: ahci: find eSATA ports and flag them as removable
  • From: Manuel Lauss
• [PATCH v2 03/19] libata: samsung_cf: fix handling platform_get_irq result
  • From: Andrzej Hajda
• Re: [PATCH 03/19] libata: samsung_cf: fix handling platform_get_irq result
  • From: Tejun Heo
• [PATCH 03/19] libata: samsung_cf: fix handling platform_get_irq result
  • From: Andrzej Hajda
• [Announce] ZDM-Device-Mapper
  • From: Adrian Palmer
• Re: [PATCH] ata:Fix error handling in the function ahci_pci_reset_controller
  • From: Tejun Heo
• Re: [PATCH] ata:Check if D2H Register FIS command fails in the function ahci_do_softreset
  • From: Tejun Heo
• Re: [PATCH] ata:Add newer AHCI hardware documentation links for more current AHCI documentation
  • From: Tejun Heo
• Re: Potential data race in __scsi_init_queue/ata_sg_setup
  • From: Dmitry Vyukov
• Potential data race in __scsi_init_queue/ata_sg_setup
  • From: Dmitry Vyukov
• Re: [PATCH v3] ata: pata_macio: Fix module autoload for OF platform driver
  • From: Luis de Bethencourt
• Re: [PATCH v3] ata: pata_macio: Fix module autoload for OF platform driver
  • From: Tejun Heo
• Re: [PATCH v3] ata: pata_macio: Fix module autoload for OF platform driver
  • From: Luis de Bethencourt
• [PATCH v3] ata: pata_macio: Fix module autoload for OF platform driver
  • From: Luis de Bethencourt
• Re: [PATCH v2] ata: pata_macio: Fix module autoload for OF platform driver
  • From: Tejun Heo
• Re: [PATCH v2] ata: pata_macio: Fix module autoload for OF platform driver
  • From: Luis de Bethencourt
• Re: [PATCH v2] ata: pata_macio: Fix module autoload for OF platform driver
  • From: Tejun Heo
• Re: [PATCH] ata: pata_macio: Fix module autoload for OF platform driver
  • From: Luis de Bethencourt
• [PATCH v2] ata: pata_macio: Fix module autoload for OF platform driver
  • From: Luis de Bethencourt
• Re: [PATCH] ata: pata_macio: Fix module autoload for OF platform driver
  • From: Tejun Heo
• [PATCH] ata: pata_macio: Fix module autoload for OF platform driver
  • From: Luis de Bethencourt
• Re: [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Tejun Heo
• [RFT PATCH] mips: capcella_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: fuloong2e_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: lasat_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: lemote2f_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: malta_qemu_32r6_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: maltaup_xpa_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: mpc30x_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] mips: sb1250_swarm_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: maltaup_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: workpad_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: maltasmvp_eva_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: maltaaprp_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: malta_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: malta_kvm_guest_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: malta_kvm_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: e55_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] mips: bigsur_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Arnd Bergmann
• RE: [PATCH v3] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Yuantian Tang
• [PATCH v3] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Yuantian.Tang
• Re: [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Fengguang Wu
• RE: [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Yuantian Tang
• Re: [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Fengguang Wu
• RE: [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Yuantian Tang
• Re: [PATCH] ata: pata_pxa: dmaengine conversion
  • From: Robert Jarzmik
• Re: [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Tejun Heo
• RE: [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Yuantian Tang
• Re: [PATCH v2] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Fengguang Wu
• Re: [PATCH] ata: pata_pxa: dmaengine conversion
  • From: Tejun Heo
• [PATCH] ata: pata_pxa: dmaengine conversion
  • From: Robert Jarzmik
• Re: [PATCH v2] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Tejun Heo
• [PATCH v2] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Yuantian.Tang
• RE: [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Yuantian Tang
• RE: [PATCH 2/3] devicetree:bindings: add devicetree bindings for Freescale AHCI
  • From: Yuantian Tang
• Re: [PATCH 2/3] devicetree:bindings: add devicetree bindings for Freescale AHCI
  • From: Li Yang
• Re: [PATCH] ahci: added a new driver for supporting Freescale AHCI sata
  • From: Li Yang
• Re: raid5-cache I/O path improvements
  • From: Christoph Hellwig
• Re: [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Tejun Heo
• Re: [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Hans de Goede
• [PATCH] ahci: qoriq: fixed using uninitialized variable warnings
  • From: Yuantian.Tang
• Re: NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Andy Smith
• Re: raid5-cache I/O path improvements
  • From: Tejun Heo
• Re: raid5-cache I/O path improvements
  • From: Shaohua Li
• Re: raid5-cache I/O path improvements
  • From: Tejun Heo
• Re: raid5-cache I/O path improvements
  • From: Shaohua Li
• Re: [PATCH 1/3] Revert "ahci: added support for Freescale AHCI sata"
  • From: Tejun Heo
• Re: raid5-cache I/O path improvements
  • From: Christoph Hellwig
• Re: raid5-cache I/O path improvements
  • From: Tejun Heo
• Re: raid5-cache I/O path improvements
  • From: Tejun Heo
• Re: raid5-cache I/O path improvements
  • From: Christoph Hellwig
• Re: [PATCH 1/3] Revert "ahci: added support for Freescale AHCI sata"
  • From: Hans de Goede
• [PATCH 3/3 v2] ahci: added a new driver for supporting Freescale AHCI sata
  • From: Yuantian.Tang
• [PATCH 2/3] devicetree:bindings: add devicetree bindings for Freescale AHCI
  • From: Yuantian.Tang
• [PATCH 1/3] Revert "ahci: added support for Freescale AHCI sata"
  • From: Yuantian.Tang
• Re: [PATCH] ahci: added a new driver for supporting Freescale AHCI sata
  • From: Hans de Goede
• RE: [PATCH] ahci: added a new driver for supporting Freescale AHCI sata
  • From: Yuantian Tang
• [GIT PULL] libata changes for 4.3
  • From: Tejun Heo
• Re: [PATCH] ahci: added a new driver for supporting Freescale AHCI sata
  • From: Hans de Goede
• [PATCH] ahci: added a new driver for supporting Freescale AHCI sata
  • From: Yuantian.Tang
• [GIT PULL] libata fixes for v4.2-rc8
  • From: Tejun Heo
• Re: [PATCH] Add factory recertified Crucial M500s to blacklist
  • From: Guillermo Amaral
• Re: [PATCH] Add factory recertified Crucial M500s to blacklist
  • From: Tejun Heo
• Re: [PATCH] Add factory recertified Crucial M500s to blacklist
  • From: Martin K. Petersen
• Re: linux: sata_nv: adma support
  • From: Pali Rohár
• [PATCH] Add factory recertified Crucial M500s to blacklist
  • From: Guillermo A. Amaral
• libata-core: Trim blacklist entry for refurbished M500 SSDs
  • From: Guillermo A. Amaral
• Re: linux: sata_nv: adma support
  • From: Robert Hancock
• Re: [PATCH v3] MIPS: Remove all the uses of custom gpio.h
  • From: Linus Walleij
• Re: linux: sata_nv: adma support
  • From: Pali Rohár
• Re: linux: sata_nv: adma support
  • From: Mark Lord
• Re: ahci_imx: can read corrupted data successfully
  • From: Tejun Heo
• ahci_imx: can read corrupted data successfully
  • From: Russell King - ARM Linux
• Re: [PATCH] ata: pata_arasam_cf: Use devm_clk_get
  • From: Tejun Heo
• [PATCH] ata: pata_arasam_cf: Use devm_clk_get
  • From: Vaishali Thakkar
• Likely race condition for some disk interface / peripherals combinations (hung processes, high iowait)
  • From: Sergio Callegari
• Kernel broken for some disk interface / disks combinations
  • From: Sergio Callegari
• Re: [RFT PATCH] ia64: zx1_defconfig: convert to use libata PATA drivers
  • From: Émeric MASCHINO
• RE: [RFT PATCH] ia64: zx1_defconfig: convert to use libata PATA drivers
  • From: Luck, Tony
• [GIT PULL] libata fixes for v4.2-rc7
  • From: Tejun Heo
• Re: [RFT PATCH] ia64: zx1_defconfig: convert to use libata PATA drivers
  • From: Émeric MASCHINO
• Re: [RFT PATCH] ia64: generic_defconfig: convert to use libata PATA drivers
  • From: Sergei Shtylyov
• [RFT PATCH v2] ia64: generic_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH v2] ia64: tiger_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH v2] ia64: gensparse_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH v2] ia64: bigsur_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFT PATCH] ia64: generic_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFT PATCH] ia64: generic_defconfig: convert to use libata PATA drivers
  • From: Sergei Shtylyov
• [RFT PATCH] ia64: gensparse_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] ia64: generic_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] ia64: zx1_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] ia64: tiger_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] ia64: bigsur_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v3] MIPS: Remove all the uses of custom gpio.h
  • From: Alexandre Courbot
• Re: [RFT PATCH] arm: omap1_defconfig: convert to use libata PATA drivers
  • From: Tony Lindgren
• Re: [PATCH] arm: mainstone_defconfig: disable IDE subsystem
  • From: Robert Jarzmik
• Re: [PATCH] arm: footbridge_defconfig: disable IDE subsystem
  • From: Russell King - ARM Linux
• Re: [PATCH] arm: footbridge_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] arm: footbridge_defconfig: disable IDE subsystem
  • From: Russell King - ARM Linux
• Re: [RFT PATCH] arm: collie_defconfig: convert to use libata PATA drivers
  • From: Dmitry Eremin-Solenikov
• [PATCH] arm: badge4_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: cerfcube_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: colibri_pxa270_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: collie_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: corgi_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: footbridge_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: h3600_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: ixp4xx_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: jornada720_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: lart_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: lpda270_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: mainstone_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: omap1_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: netwinder_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: pxa255-idp_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: shannon_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: s3c2410_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: trizeps4_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: spitz_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] arm: assabet_defconfig: disable IDE subsystem
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] arm: am200epdkit_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt37x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] pata_hpt370x driver refuses to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• [Bug 102741] New: pata_hpt370x driver doesn't want to operate with Adaptec 1200A at UDMA/100
  • From: bugzilla-daemon
• mocking EH
  • From: Andy Falanga (afalanga)
• Re: NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Andrey Korolyov
• Re: NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Tim Small
• Re: NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Andy Smith
• Re: NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Andy Smith
• Re: NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Tim Small
• Re: [PATCH] libata: fix libata-core.c kernel-doc warning
  • From: Tejun Heo
• Re: 4.1-rc6: ATA link is slow to respond, please be patient (fwd)
  • From: Christian Kujau
• Re: 4.1-rc6: ATA link is slow to respond, please be patient (fwd)
  • From: Christian Kujau
• [PATCH] libata: fix libata-core.c kernel-doc warning
  • From: Randy Dunlap
• Re: 4.1-rc6: ATA link is slow to respond, please be patient
  • From: Michael Ellerman
• NCQ-related READ/WRITE frozen ATA errors with Intel C220 and Intel s3610 SSDs
  • From: Andy Smith
• [PATCH] ide: add IDE to libata host drivers conversion table document
  • From: Bartlomiej Zolnierkiewicz
• Re: AMD-Vi IO_PAGE_FAULTs and ata3.00: failed command: READ FPDMA QUEUED errors since Linux 4.0
  • From: Andreas Hartmann
• Re: [PATCH v2] ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  • From: Tejun Heo
• Re: [PATCH v2] ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  • From: Florian Fainelli
• Re: [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Tejun Heo
• [PATCH v2] ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  • From: Axel Lin
• Re: [PATCH RFT] ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  • From: Florian Fainelli
• [PATCH RFT] ata: ahci_brcmstb: Fix misuse of IS_ENABLED
  • From: Axel Lin
• Re: AMD-Vi IO_PAGE_FAULTs and ata3.00: failed command: READ FPDMA QUEUED errors since Linux 4.0
  • From: Andreas Hartmann
• Re: linux: sata_nv: adma support
  • From: Pali Rohár
• Re: AMD-Vi IO_PAGE_FAULTs and ata3.00: failed command: READ FPDMA QUEUED errors since Linux 4.0
  • From: Jeff Moyer
• [PATCH v3] MIPS: Remove all the uses of custom gpio.h
  • From: Alban Bedel
• Re: [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• Re: [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Joe Perches
• Re: [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• Re: [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• [PATCH] sata_sx4: Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Hannes Reinecke
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Hannes Reinecke
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: James Bottomley
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: James Bottomley
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• Re: [PATCH libata/for-4.2-fixes] libata: disable NCQ autosense
  • From: Tejun Heo
• Re: [PATCH 0/6] ZAC host-aware device support
  • From: James Bottomley
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• [PATCH libata/for-4.2-fixes] libata: disable NCQ autosense
  • From: Tejun Heo
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• Re: [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Linus Walleij
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Hannes Reinecke
• Re: [PATCH 0/6] ZAC host-aware device support
  • From: Hannes Reinecke
• Re: [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Ralf Baechle
• Re: [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Linus Walleij
• [PATCH] Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• Re: linux: sata_nv: adma support
  • From: Robert Hancock
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Joe Perches
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Joe Perches
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• [PATCH v2] MIPS: Remove all the uses of custom gpio.h
  • From: Alban Bedel
• Re: [PATCH 0/6] ZAC host-aware device support
  • From: James Bottomley
• Re: [PATCH 0/6] ZAC host-aware device support
  • From: Tejun Heo
• Re: [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Tejun Heo
• Re: [PATCH] Check return code from pdc20621_i2c_read()
  • From: Sergei Shtylyov
• [PATCH] Check return code from pdc20621_i2c_read()
  • From: Tomer Barletz
• Re: linux: sata_nv: adma support
  • From: Pali Rohár
• Re: linux: sata_nv: adma support
  • From: Robert Hancock
• Re: linux: sata_nv: adma support
  • From: Pali Rohár
• [PATCH 3/6] libata: implement ZBC IN translation
  • From: Hannes Reinecke
• [PATCH 4/6] libata: Implement ZBC OUT translation
  • From: Hannes Reinecke
• [PATCH 6/6] libata: support host-aware ZAC devices
  • From: Hannes Reinecke
• [PATCH 0/6] ZAC host-aware device support
  • From: Hannes Reinecke
• [PATCH 1/6] libata: Do not retry commands with valid autosense
  • From: Hannes Reinecke
• [PATCH 5/6] libata: support device-managed ZAC devices
  • From: Hannes Reinecke
• [PATCH 2/6] libata-scsi: use ata_scsi_set_sense when generating ATA sense
  • From: Hannes Reinecke
• Re: [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Manuel Lauss
• Re: [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Jonas Gorski
• [PATCH] MIPS: Remove all the uses of custom gpio.h
  • From: Alban Bedel
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Andreas Hartmann
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Joerg Roedel
• Re: [PATCH 4.2] ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
  • From: Tejun Heo
• Re: [PATCH 4.2] ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
  • From: Florian Fainelli
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Linus Walleij
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Andreas Hartmann
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Andreas Hartmann
• [GIT PULL] libata fixes for v4.2-rc3
  • From: Tejun Heo
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Andreas Hartmann
• Re: Since Linux 4.1: A lot of AMD-Vi IO_PAGE_FAULTs
  • From: Bjorn Helgaas
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Lars-Peter Clausen
• How do the upper layers know a SATA drive has just been plugged in
  • From: Andy Falanga (afalanga)
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Linus Walleij
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Alban
• Re: [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Manuel Lauss
• [PATCH] MIPS: Remove most of the custom gpio.h
  • From: Alban Bedel
• Re: [PATCH] libata: Do not blacklist M510DC
  • From: Tejun Heo
• [PATCH] libata: Do not blacklist M510DC
  • From: Martin K. Petersen
• Implementing aio cancel for SCSI/SATA devices
  • From: Rajat Jain
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Sergei Shtylyov
• Re: [PATCH] libata: increase the timeout when setting transfer mode
  • From: Tejun Heo
• Re: [PATCH] libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Tejun Heo
• Re: [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Greg KH
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Greg KH
• [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Arne Fitzenreiter
• [PATCH 0/2] disable trim for SuperSSpeed S238 SSD - v3
  • From: Arne Fitzenreiter
• [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Arne Fitzenreiter
• Re: [PATCH 4.2] ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
  • From: Brian Norris
• Re: [PATCH] libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER
  • From: Tejun Heo
• Re: [PATCH] ata: sata_rcar: Remove obsolete sata-r8a779* platform_device_id entries
  • From: Tejun Heo
• Re: [PATCH] ata: pmp: add quirk for Marvell 4140 SATA PMP
  • From: Tejun Heo
• [PATCH 4.2] ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
  • From: Florian Fainelli
• Re: [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Tejun Heo
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Tejun Heo
• [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Arne Fitzenreiter
• [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Arne Fitzenreiter
• [PATCH 0/2] disable trim for SuperSSpeed S238 SSD - v2
  • From: Arne Fitzenreiter
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: arne_f
• Re: [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Sergei Shtylyov
• [PATCH 2/2] libata: force disable trim for SuperSSpeed S238
  • From: Arne Fitzenreiter
• [PATCH 1/2] libata: add ATA_HORKAGE_NOTRIM
  • From: Arne Fitzenreiter
• [PATCH 0/2] disable trim for SuperSSpeed S238 SSD
  • From: Arne Fitzenreiter
• Re: [PATCH] libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
  • From: Jeff Moyer
• [PATCH] libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit
  • From: David Milburn
• [PATCH] ide: Add helper macro for struct pci_driver bolierplate
  • From: Vaishali Thakkar
• [PATCH] libata: increase the timeout when setting transfer mode
  • From: Mikulas Patocka
• Re: Addresses in PxCLB and PxCLBU
  • From: Andy Falanga (afalanga)
• Re: Addresses in PxCLB and PxCLBU
  • From: Sergei Shtylyov
• Addresses in PxCLB and PxCLBU
  • From: Andy Falanga (afalanga)
• [PATCH] libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for HP 250GB SATA disk VB0250EAVER
  • From: Aleksei Mamlin
• [PATCH] ata: pmp: add quirk for Marvell 4140 SATA PMP
  • From: Thomas Petazzoni
• Re: configurable discard parameters
  • From: Tom Yan
• [GIT PULL] libata changes for v4.2-rc1
  • From: Tejun Heo
• Re: configurable discard parameters
  • From: Martin K. Petersen
• Re: failed command: WRITE FPDMA QUEUED, suspiciously on two different disks
  • From: Sami Farin
• Re: configurable discard parameters
  • From: Tom Yan
• Re: failed command: WRITE FPDMA QUEUED, suspiciously on two different disks
  • From: Tim Small
• Re: failed command: WRITE FPDMA QUEUED, suspiciously on two different disks
  • From: Suman Tripathi
• Re: configurable discard parameters
  • From: Martin K. Petersen
• Re: [PATCH] ata: sata_rcar: Remove obsolete sata-r8a779* platform_device_id entries
  • From: Simon Horman
• Re: configurable discard parameters
  • From: Tom Yan
• failed command: WRITE FPDMA QUEUED, suspiciously on two different disks
  • From: Sami Farin
• Re: configurable discard parameters
  • From: Martin K. Petersen
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Martin K. Petersen
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Martin K. Petersen
• Re: configurable discard parameters
  • From: Tom Yan
• [PATCH] ata: sata_rcar: Remove obsolete sata-r8a779* platform_device_id entries
  • From: Geert Uytterhoeven
• Re: configurable discard parameters
  • From: Martin K. Petersen
• how to issue an ATA command
  • From: Andy Falanga (afalanga)
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Tom Yan
• Re: configurable discard parameters
  • From: Martin K. Petersen
• configurable discard parameters
  • From: Tom Yan
• Re: [PATCH] libata: Do not blacklist Micron M500DC
  • From: Tejun Heo
• [PATCH] libata: Do not blacklist Micron M500DC
  • From: Martin K. Petersen
• Re: [PATCH] ata: ahci_mvebu: add suspend/resume support
  • From: Tejun Heo
• Re: [PATCH v2] ahci, msix: Fix build error for !PCI_MSI
  • From: Tejun Heo
• [PATCH v2] ahci, msix: Fix build error for !PCI_MSI
  • From: Robert Richter
• [PATCH] ata: ahci_mvebu: add suspend/resume support
  • From: Thomas Petazzoni
• [PATCH] ahci, msix: Fix build error for !PCI_MSI
  • From: Robert Richter
• Re: [PATCH] ahci, msix: Fix build error for !PCI_MSI
  • From: Jiang Liu
• Re: [PATCH v5 0/2] ahci: Add generic MSI-X support for single interrupts to SATA PCI
  • From: Tejun Heo
• Re: [PATCH 4/4] libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
  • From: Martin K. Petersen
• Re: how to "decode" SG_IO: bad/missing sense data?
  • From: Tom Yan
• Re: [PATCH v5 0/2] ahci: Add generic MSI-X support for single interrupts to SATA PCI
  • From: Robert Richter
• Re: how to "decode" SG_IO: bad/missing sense data?
  • From: Douglas Gilbert
• how to "decode" SG_IO: bad/missing sense data?
  • From: Tom Yan
• Re: [PATCH 4/4] libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
  • From: David Milburn
• Re: [PATCH 4/4] libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
  • From: Martin K. Petersen
• Re: [PATCH 4/4] libata: Fall back to unqueued READ LOG EXT if the DMA variant fails
  • From: David Milburn
• Device unreadable, no SMART errors found
  • From: Andre
• Re: Question about HighPoint RocketRAID 642L SCSI driver conflict with Linux AHCI driver
  • From: One Thousand Gnomes
• Re: [PATCH] libata: finally use __initconst in ata_parse_force_one()
  • From: Tejun Heo
• Re: [PATCH v3 0/2] Support for CEVA SATA Host controller
  • From: Tejun Heo
• Re: [PATCH v3 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Hans de Goede
• [PATCH] libata: finally use __initconst in ata_parse_force_one()
  • From: Rasmus Villemoes
• [PATCH v3 0/2] Support for CEVA SATA Host controller
  • From: Suneel Garapati
• [PATCH v3 1/2] devicetree:bindings: add devicetree bindings for ceva ahci
  • From: Suneel Garapati
• Re: [PATCH v3 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Tejun Heo
• [PATCH v3 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Suneel Garapati
• Re: [PATCH v2 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Hans de Goede
• Re: [PATCH v2 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Tejun Heo
• Re: [PATCH] ahci: added support for Freescale AHCI sata
  • From: Tejun Heo
• Re: [PATCH] pata_octeon_cf: fix broken build
  • From: Tejun Heo
• Re: [GIT PULL] libata fixes for v4.1-rc7
  • From: Tejun Heo
• [PATCH] pata_octeon_cf: fix broken build
  • From: Aaro Koskinen
• [GIT PULL] libata fixes for v4.1-rc7
  • From: Tejun Heo
• [PATCH v5 1/2] ahci: Add generic MSI-X support for single interrupts to SATA PCI driver
  • From: Robert Richter
• [PATCH v5 2/2] ahci: Add support for Cavium's ThunderX host controller
  • From: Robert Richter
• [PATCH v5 0/2] ahci: Add generic MSI-X support for single interrupts to SATA PCI
  • From: Robert Richter
• Re: [PATCH v2 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Michal Simek
• Re: [PATCH v2 1/2] devicetree:bindings: add devicetree bindings for ceva ahci
  • From: Michal Simek
• [PATCH v2 0/2] Support for CEVA SATA Host controller
  • From: Suneel Garapati
• [PATCH v2 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Suneel Garapati
• [PATCH v2 1/2] devicetree:bindings: add devicetree bindings for ceva ahci
  • From: Suneel Garapati
• Re: [PATCH v4 3/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Tejun Heo
• Re: [PATCH v4 3/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• [PATCH] ahci: added support for Freescale AHCI sata
  • From: Yuantian.Tang
• Re: Question about HighPoint RocketRAID 642L SCSI driver conflict with Linux AHCI driver
  • From: Tejun Heo
• Question about HighPoint RocketRAID 642L SCSI driver conflict with Linux AHCI driver
  • From: linux
• Re: [PATCH v4 3/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Tejun Heo
• Re: [PATCH v4 2/3] ahci: Store irq number in struct ahci_host_priv
  • From: Tejun Heo
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Gregory CLEMENT
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Ian Campbell
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Andrew Lunn
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Ian Campbell
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Felipe Balbi
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Kishon Vijay Abraham I
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Ian Campbell
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Andrew Lunn
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Andrew Lunn
• Re: QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Ian Campbell
• [PATCH v4 3/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• [PATCH v4 1/3] ahci: Move interrupt enablement code to a separate function
  • From: Robert Richter
• [PATCH v4 2/3] ahci: Store irq number in struct ahci_host_priv
  • From: Robert Richter
• [PATCH v4 0/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• QNAP TS-419: sata_mv fails to initialise with "can't set global reset"
  • From: Ian Campbell
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Felipe Balbi
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Sylwester Nawrocki
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Tejun Heo
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Maxime Coquelin
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Kishon Vijay Abraham I
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Kishon Vijay Abraham I
• Re: imx6 sata cdrom driver issue
  • From: Fabio Estevam
• Re: [PATCH] ahci: Store irq number in struct ahci_host_priv
  • From: Tejun Heo
• Re: [PATCH v3 1/3] ahci: Move interrupt enablement code to separate functions
  • From: Tejun Heo
• [PATCH] ahci: Store irq number in struct ahci_host_priv
  • From: Robert Richter
• Re: [PATCH v3 0/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Tejun Heo
• [PATCH v3 1/3] ahci: Move interrupt enablement code to separate functions
  • From: Robert Richter
• [PATCH v3 2/3] ahci: Store irq number in struct ahci_host_priv
  • From: Robert Richter
• [PATCH v3 3/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• [PATCH v3 0/3] AHCI: Add generic MSI-X interrupt support to SATA PCI driver
  • From: Robert Richter
• Re: [PATCH] ata:sata_nv - Change 1 to true for bool type variable.
  • From: Tejun Heo
• Re: [PATCH] ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
  • From: Tejun Heo
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Felipe Balbi
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Arun Ramamurthy
• [PATCH] ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
  • From: Gregory CLEMENT
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Felipe Balbi
• Re: [PATCHv3 1/4] phy: phy-core: Make GENERIC_PHY an invisible option
  • From: Arun Ramamurthy
• [PATCH] ata:sata_nv - Change 1 to true for bool type variable.
  • From: Shailendra Verma
• Re: [PATCH v3 1/5] Documentation: devicetree: add Broadcom SATA binding
  • From: Tejun Heo
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Tejun Heo
• Re: [PATCH 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Paul Bolle
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH v3 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Tejun Heo
• Re: [PATCH v3 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Brian Norris
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Tejun Heo
• Re: [PATCH v3 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Tejun Heo
• Re: [PATCH v3 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Fabio Estevam
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Tejun Heo
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Brian Norris
• Re: [PATCH v3 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips
  • From: Tejun Heo
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Tejun Heo
• Re: [PATCH v3 0/5] AHCI and SATA PHY support for Broadcom STB SoCs
  • From: Tejun Heo
• Re: [PATCH 2/2] drivers: ata: add support for Ceva sata host controller
  • From: Tejun Heo