On 30/10/15 07:01, Jaedon Shin wrote:
> Hi all,
>
> This patch series add support SATA for BMIPS_GENERIC.
Sorry for the lag.
Tested on 7425b2, there is a small mistake in the interrupt number for
the AHCI controller in the 7425.dtsi file (40 -> 41, see below), after
fixing that, I get both drives (external and internal ports) to be
identified successfully:
# dmesg | grep scsi
<6>[ 0.964097] scsi host0: brcm-ahci
<6>[ 0.967982] scsi host1: brcm-ahci
<5>[ 1.122386] scsi 0:0:0:0: Direct-Access ATA WDC
WD2500AAKX-7 1H19 PQ: 0 ANSI: 5
<5>[ 1.124512] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 1.411546] scsi 1:0:0:0: Direct-Access ATA WDC
WD2500AAKX-7 1H19 PQ: 0 ANSI: 5
<5>[ 1.428870] sd 1:0:0:0: Attached scsi generic sg1 type 0
#
And performance looks good:
# hdparm -tT /dev/sda
/dev/sda:
[ 48.557068] random: nonblocking pool is initialized
Timing buffer-cache reads: 524 MB in 0.50 seconds = 1052111 kB/s
Timing buffered disk reads: 358 MB in 3.00 seconds = 122132 kB/s
# hdparm -tT /dev/sdb
/dev/sdb:
Timing buffer-cache reads: 528 MB in 0.50 seconds = 1060559 kB/s
Timing buffered disk reads: 374 MB in 3.00 seconds = 127496 kB/s
Tested-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
For interrupt numbers, computing them from the HIF_CPU_INTR1 register
works like this this:
HW IRQ# = N * 32 + M
where N ranges from 0->2 and M is the bit within the 32-bits word.
Thanks!
>
> Changes in v4:
> - remove unused properties from bcm{7425,7342,7362}.dtsi
>
> Changes in v3:
> - fix typo quirk instead of quick
> - disable NCQ before initialzing SATA controller endianness
> - fix misnomer controlling phy interface
> - remove brcm,broken-ncq and brcm,broken-phy properties from devicetree
> - use compatible string for quirks
> - use list for compatible strings
> - add "Acked-by:" tags
>
> Changes in v2:
> - adds quirk for ncq
> - adds quirk for phy interface control
> - remove unused definitions in ahci_brcmstb
> - combines compatible string
>
> Jaedon Shin (10):
> ata: ahci_brcmstb: add support MIPS-based platforms
> ata: ahci_brcmstb: add quirk for broken ncq
> ata: ahci_brcmstb: add quirk for different phy
> ata: ahci_brcmstb: remove unused definitions
> phy: phy_brcmstb_sata: remove duplicate definitions
> phy: phy_brcmstb_sata: add data for phy version
> phy: phy_brcmstb_sata: add support MIPS-based platforms
> MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7425
> MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7346
> MIPS: BMIPS: brcmstb: add SATA/PHY nodes for bcm7362
>
> .../devicetree/bindings/ata/brcm,sata-brcmstb.txt | 4 +-
> .../bindings/phy/brcm,brcmstb-sata-phy.txt | 1 +
> arch/mips/boot/dts/brcm/bcm7346.dtsi | 40 +++++++++++++++
> arch/mips/boot/dts/brcm/bcm7362.dtsi | 40 +++++++++++++++
> arch/mips/boot/dts/brcm/bcm7425.dtsi | 40 +++++++++++++++
> arch/mips/boot/dts/brcm/bcm97346dbsmb.dts | 8 +++
> arch/mips/boot/dts/brcm/bcm97362svmb.dts | 8 +++
> drivers/ata/Kconfig | 2 +-
> drivers/ata/ahci_brcmstb.c | 58 +++++++++++++++++++++-
> drivers/phy/Kconfig | 4 +-
> drivers/phy/phy-brcmstb-sata.c | 47 ++++++++++++++----
> 11 files changed, 236 insertions(+), 16 deletions(-)
>
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
