The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware block for AHCI SATA3. The BCM7425 is flagship chipset of 40nm class. Other MIPS-based 40nm chipsets has same hardware block. so the compatible string may be use brcm,bcm7425-sata-phy. Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx> --- .../bindings/phy/brcm,brcmstb-sata-phy.txt | 1 + drivers/phy/Kconfig | 4 ++-- drivers/phy/phy-brcmstb-sata.c | 24 ++++++++++++++++------ 3 files changed, 21 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt index 7f81ef90146a..c4b31075ffef 100644 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt @@ -3,6 +3,7 @@ Required properties: - compatible: should be one or more of "brcm,bcm7445-sata-phy" + "brcm,bcm7425-sata-phy" "brcm,phy-sata3" - address-cells: should be 1 - size-cells: should be 0 diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 47da573d0bab..c83e48661fd7 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -364,11 +364,11 @@ config PHY_TUSB1210 config PHY_BRCMSTB_SATA tristate "Broadcom STB SATA PHY driver" - depends on ARCH_BRCMSTB + depends on ARCH_BRCMSTB || BMIPS_GENERIC depends on OF select GENERIC_PHY help - Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs. + Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs. Likely useful only with CONFIG_SATA_BRCMSTB enabled. endmenu diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c index 5de394f589c8..c8243581f196 100644 --- a/drivers/phy/phy-brcmstb-sata.c +++ b/drivers/phy/phy-brcmstb-sata.c @@ -32,8 +32,14 @@ /* Register offset between PHYs in PCB space */ #define SATA_MDIO_REG_28NM_SPACE_SIZE 0x1000 +/* The older SATA PHY registers duplicated per port registers within the map, + * rather than having a separate map per port. + */ +#define SATA_MDIO_REG_40NM_SPACE_SIZE 0x10 + enum brcm_sata_phy_version { BRCM_SATA_PHY_28NM, + BRCM_SATA_PHY_40NM, }; struct brcm_sata_port { @@ -51,7 +57,7 @@ struct brcm_sata_phy { struct brcm_sata_port phys[MAX_PORTS]; }; -enum sata_mdio_phy_regs_28nm { +enum sata_mdio_phy_regs { PLL_REG_BANK_0 = 0x50, PLL_REG_BANK_0_PLLCONTROL_0 = 0x81, @@ -69,10 +75,14 @@ enum sata_mdio_phy_regs_28nm { static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port) { struct brcm_sata_phy *priv = port->phy_priv; - u32 offset; + u32 offset = 0; if (priv->version == BRCM_SATA_PHY_28NM) offset = SATA_MDIO_REG_28NM_SPACE_SIZE; + else if (priv->version == BRCM_SATA_PHY_40NM) + offset = SATA_MDIO_REG_40NM_SPACE_SIZE; + else + dev_err(priv->dev, "should not happen\n"); return priv->phy_base + (port->portnum * offset); } @@ -93,7 +103,7 @@ static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs, #define FMAX_VAL_DEFAULT 0x3df #define FMAX_VAL_SSC 0x83 -static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port) +static void brcm_sata_cfg_ssc(struct brcm_sata_port *port) { void __iomem *base = brcm_sata_phy_base(port); struct brcm_sata_phy *priv = port->phy_priv; @@ -124,12 +134,12 @@ static int brcm_sata_phy_init(struct phy *phy) { struct brcm_sata_port *port = phy_get_drvdata(phy); - brcm_sata_cfg_ssc_28nm(port); + brcm_sata_cfg_ssc(port); return 0; } -static const struct phy_ops phy_ops_28nm = { +static const struct phy_ops phy_ops = { .init = brcm_sata_phy_init, .owner = THIS_MODULE, }; @@ -137,6 +147,8 @@ static const struct phy_ops phy_ops_28nm = { static const struct of_device_id brcm_sata_phy_of_match[] = { { .compatible = "brcm,bcm7445-sata-phy", .data = (void *)BRCM_SATA_PHY_28NM }, + { .compatible = "brcm,bcm7425-sata-phy", + .data = (void *)BRCM_SATA_PHY_40NM }, {}, }; MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match); @@ -193,7 +205,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev) port = &priv->phys[id]; port->portnum = id; port->phy_priv = priv; - port->phy = devm_phy_create(dev, child, &phy_ops_28nm); + port->phy = devm_phy_create(dev, child, &phy_ops); port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc"); if (IS_ERR(port->phy)) { dev_err(dev, "failed to create PHY\n"); -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html