On 12/20/2015 1:11 PM, Måns Rullgård wrote:
Julian Margetson <runaway@xxxxxxxx> writes:
On 12/19/2015 4:41 PM, Måns Rullgård wrote:
Andy Shevchenko <andy.shevchenko@xxxxxxxxx> writes:
On Sat, Dec 19, 2015 at 10:16 PM, Julian Margetson <runaway@xxxxxxxx> wrote:
On 12/19/2015 3:07 PM, Måns Rullgård wrote:
Julian Margetson <runaway@xxxxxxxx> writes:
Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sda8 console=ttyS0,115200
console=tty1 dw_dmac_core.dyndbg dw_dmac.dyndbg
Please add ignore_log_level.
Had to truncate the kernel command line to add it.
I guess Måns meant 'ignore_loglevel'
Obviously. I can never remember where the underscores go.
[ 18.362244] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 18.372454] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 18.405433] sd 3:0:0:0: [sdc] Write Protect is off
[ 18.420654] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 18.461731] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.502918] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 18.511807] dma dma0chan0: dwc_prep_slave_sg
[ 18.516083] dma dma0chan0: scanned 1 descriptors on freelist
[ 18.521753] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xedeaa800, count: 1 addr: 0xfffffffff6a14400
[ 18.531327] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue: tag=0 ap->link.sactive = 0x00000001 sactive=0x00000001
[ 18.541359] sata-dwc 4bffd1000.sata: sata_dwc_exec_command_by_tag cmd(0x60): READ FPDMA QUEUED tag=0
[ 18.553703] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x00000082 active_tag=-84148995
[ 18.561717] sata-dwc 4bffd1000.sata: sata_dwc_isr: NEWFP tag=0
[ 18.567561] sata-dwc 4bffd1000.sata: sata_dwc_bmdma_start_by_tag qc=ed2340b8 tag: 0 cmd: 0x60 dma_dir: from device start_dma? 1
[ 18.579043] sata-dwc 4bffd1000.sata: taskfile cmd: 0x60 protocol: ATA NCQ flags: 0x17 device: 40
[ 18.587836] sata-dwc 4bffd1000.sata: feature: 0x08 nsect: 0x0 lbal: 0x0 lbam: 0x0 lbah: 0x0
[ 18.596196] sata-dwc 4bffd1000.sata: hob_feature: 0x00 hob_nsect: 0x0 hob_lbal: 0x0 hob_lbam: 0x0 hob_lbah: 0x0
[ 18.606292] dma dma0chan0: dwc_tx_submit: queued 2
[ 18.611091] dma dma0chan0: dwc_dostart_first_queued: started 2
[ 48.748614] ata3: lost interrupt (Status 0x40)
Now we're getting somewhere. The dma transfer is set up and initiated,
but then nothing happens. Comparing the old sata_dwc driver, from
before the switch to dmaengine, with the dw_dma driver, I noticed an
obvious problem: the descriptors are filled in using the wrong byte
order. This patch might fix that.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.12.20 13:32:57 =~=~=~=~=~=~=~=~=~=~=~=
U-Boot 2015.a (May 16 2015 - 14:20:11)
CPU: AMCC PowerPC 460EX Rev. B at 1155 MHz (PLB=231 OPB=115 EBC=115)
No Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
Internal PCI arbiter enabled
32 kB I-Cache 32 kB D-Cache
Board: Sam460ex/cr, PCIe 4x + SATA-2
I2C: ready
DRAM: 2 GiB (ECC not enabled, 462 MHz, CL4)
PCI: Bus Dev VenId DevId Class Int
00 04 1095 3512 0104 00
00 06 126f 0501 0380 00
PCIE1: successfully set as root-complex
02 00 1002 683f 0300 ff
Net: ppc_4xx_eth0
FPGA: Revision 03 (2010-10-07)
SM502: found
PERMD2:not found
VGA: 1
VESA: OK
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.4.0-rc5-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #3 PREEMPT Sun Dec 20 13:24:01 AST 2015
[ 0.000000] Found legacy serial port 0 for /plb/opb/serial@ef600300
[ 0.000000] mem=4ef600300, taddr=4ef600300, irq=0, clk=11059200, speed=0
[ 0.000000] Found legacy serial port 1 for /plb/opb/serial@ef600400
[ 0.000000] mem=4ef600400, taddr=4ef600400, irq=0, clk=11059200, speed=0
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] free_area_init_node: node 0, pgdat c0a33dc8, node_mem_map eefed000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 327680 pages, LIFO batch:31
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sda8 console=ttyS0,115200 ignore_loglevel dw_dmac_core.dyndbg dw_dmac.dyndbg
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2068868K/2097152K available (6732K kernel code, 332K rwdata, 3232K rodata, 236K init, 368K bss, 28284K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000000] time_init: decrementer frequency = 1155.000010 MHz
[ 0.000000] time_init: processor frequency = 1155.000010 MHz
[ 0.000013] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns
[ 0.000024] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000035] clockevent: decrementer mult[93d70a53] shift[31] cpu[0]
[ 0.000146] Console: colour dummy device 80x25
[ 0.000175] pid_max: default: 32768 minimum: 301
[ 0.000276] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000288] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004011] devtmpfs: initialized
[ 0.006749] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.007137] xor: measuring software checksum speed
[ 0.016346] 8regs : 856.000 MB/sec
[ 0.026354] 8regs_prefetch: 784.000 MB/sec
[ 0.036385] 32regs : 1120.000 MB/sec
[ 0.046418] 32regs_prefetch: 996.000 MB/sec
[ 0.046424] xor: using function: 32regs (1120.000 MB/sec)
[ 0.046459] prandom: seed boundary self test passed
[ 0.048905] prandom: 100 self tests passed
[ 0.049444] NET: Registered protocol family 16
[ 0.052544] cpuidle: using governor ladder
[ 0.055577] cpuidle: using governor menu
[ 0.055978] 256k L2-cache enabled
[ 0.056063] PCIE0: Port disabled via device-tree
[ 0.056114] PCIE1: Checking link...
[ 0.056120] PCIE1: Device detected, waiting for link...
[ 0.056126] PCIE1: link is up !
[ 0.158410] PCI host bridge /plb/pciex@d20000000 (primary) ranges:
[ 0.158437] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.158453] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.158463] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.158486] 4xx PCI DMA offset set to 0x00000000
[ 0.158492] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158498] DMA window size 0x0000000080000000
[ 0.158522] PCIE1: successfully set as root-complex
[ 0.158588] PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
[ 0.158604] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.158618] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.158629] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.158643] 4xx PCI DMA offset set to 0x00000000
[ 0.158648] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158654] DMA window size 0x0000000080000000
[ 0.159140] PCI: Probing PCI hardware
[ 0.159241] PCI host bridge to bus 0000:80
[ 0.159259] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff])
[ 0.159273] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.159285] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.159298] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 0.159312] pci_bus 0000:80: busn_res: [bus 80-ff] end is updated to ff
[ 0.159349] pci 0000:80:00.0: [aaa1:bed1] type 01 class 0x060400
[ 0.159389] pci 0000:80:00.0: reg 0x10: [mem 0x00000000-0x7fffffff pref]
[ 0.159421] PCI: Hiding 4xx host bridge resources 0000:80:00.0
[ 0.159695] pci 0000:81:00.0: [1002:683f] type 00 class 0x030000
[ 0.159746] pci 0000:81:00.0: reg 0x10: [mem 0xea0000000-0xeafffffff 64bit pref]
[ 0.159767] pci 0000:81:00.0: reg 0x18: [mem 0xeb0000000-0xeb003ffff 64bit]
[ 0.159782] pci 0000:81:00.0: reg 0x20: [io 0xfffe2000-0xfffe20ff]
[ 0.159805] pci 0000:81:00.0: reg 0x30: [mem 0xf00100000-0xf0011ffff pref]
[ 0.159868] pci 0000:81:00.0: supports D1 D2
[ 0.159878] pci 0000:81:00.0: PME# supported from D1 D2 D3hot
[ 0.160029] pci 0000:81:00.1: [1002:aab0] type 00 class 0x040300
[ 0.160078] pci 0000:81:00.1: reg 0x10: [mem 0xf00100000-0xf00103fff 64bit]
[ 0.160161] pci 0000:81:00.1: supports D1 D2
[ 0.160286] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.160302] pci 0000:80:00.0: bridge window [io 0xfffe2000-0xfffe2fff]
[ 0.160314] pci 0000:80:00.0: bridge window [mem 0xea0000000-0xeb00fffff]
[ 0.160401] pci_bus 0000:80: busn_res: [bus 80-ff] end is updated to bf
[ 0.160493] PCI host bridge to bus 0001:00
[ 0.160507] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.160519] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.160531] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.160542] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.160553] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.160581] pci 0001:00:04.0: [1095:3512] type 00 class 0x010400
[ 0.160604] pci 0001:00:04.0: reg 0x10: [io 0x1000-0x1007]
[ 0.160617] pci 0001:00:04.0: reg 0x14: [io 0x1008-0x100b]
[ 0.160629] pci 0001:00:04.0: reg 0x18: [io 0x1010-0x1017]
[ 0.160642] pci 0001:00:04.0: reg 0x1c: [io 0x1018-0x101b]
[ 0.160654] pci 0001:00:04.0: reg 0x20: [io 0x1020-0x102f]
[ 0.160667] pci 0001:00:04.0: reg 0x24: [mem 0xd80000000-0xd800001ff]
[ 0.160680] pci 0001:00:04.0: reg 0x30: [mem 0xc0ee00000-0xc0ee7ffff pref]
[ 0.160706] pci 0001:00:04.0: supports D1 D2
[ 0.160827] pci 0001:00:06.0: [126f:0501] type 00 class 0x038000
[ 0.160851] pci 0001:00:06.0: reg 0x10: [mem 0xd84000000-0xd87ffffff]
[ 0.160863] pci 0001:00:06.0: reg 0x14: [mem 0xd88000000-0xd881fffff]
[ 0.160899] pci 0001:00:06.0: supports D1 D2
[ 0.161076] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.161167] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161179] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff]
[ 0.161190] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.161206] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161227] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit]
[ 0.161245] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref]
[ 0.161257] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit]
[ 0.161274] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.161287] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.161298] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.161309] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.161320] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161333] pci_bus 0000:80: resource 4 [io 0xfffe0000-0xfffeffff]
[ 0.161343] pci_bus 0000:80: resource 5 [mem 0xe80000000-0xeffffffff]
[ 0.161353] pci_bus 0000:80: resource 6 [mem 0xf00100000-0xf001fffff]
[ 0.161363] pci_bus 0000:81: resource 0 [io 0xfffe1000-0xfffe1fff]
[ 0.161372] pci_bus 0000:81: resource 1 [mem 0xe90000000-0xe900fffff]
[ 0.161382] pci_bus 0000:81: resource 2 [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161397] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.161410] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.161423] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref]
[ 0.161434] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.161445] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.161457] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.161468] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.161480] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.161492] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.161504] pci_bus 0001:00: resource 4 [io 0x0000-0xffff]
[ 0.161514] pci_bus 0001:00: resource 5 [mem 0xd80000000-0xdffffffff]
[ 0.161524] pci_bus 0001:00: resource 6 [mem 0xc0ee00000-0xc0eefffff]
[ 0.188262] raid6: int32x1 gen() 300 MB/s
[ 0.205415] raid6: int32x1 xor() 173 MB/s
[ 0.222442] raid6: int32x2 gen() 433 MB/s
[ 0.239489] raid6: int32x2 xor() 240 MB/s
[ 0.256581] raid6: int32x4 gen() 476 MB/s
[ 0.273660] raid6: int32x4 xor() 267 MB/s
[ 0.290716] raid6: int32x8 gen() 234 MB/s
[ 0.307887] raid6: int32x8 xor() 218 MB/s
[ 0.307894] raid6: using algorithm int32x4 gen() 476 MB/s
[ 0.307900] raid6: .... xor() 267 MB/s, rmw enabled
[ 0.307907] raid6: using intx1 recovery algorithm
[ 0.308205] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none
[ 0.308219] vgaarb: loaded
[ 0.308225] vgaarb: bridge control possible 0000:81:00.0
[ 0.308489] SCSI subsystem initialized
[ 0.308632] libata version 3.00 loaded.
[ 0.308870] usbcore: registered new interface driver usbfs
[ 0.308914] usbcore: registered new interface driver hub
[ 0.308968] usbcore: registered new device driver usb
[ 0.309064] pps_core: LinuxPPS API ver. 1 registered
[ 0.309071] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.309098] PTP clock support registered
[ 0.309245] EDAC MC: Ver: 3.0.0
[ 0.309591] Advanced Linux Sound Architecture Driver Initialized.
[ 0.329536] DMA-API: preallocated 65536 debug entries
[ 0.329549] DMA-API: debugging enabled by kernel config
[ 0.329594] clocksource: Switched to clocksource timebase
[ 0.336215] NET: Registered protocol family 2
[ 0.336799] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.336894] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 0.337234] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.337345] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.337410] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.337757] NET: Registered protocol family 1
[ 0.338072] RPC: Registered named UNIX socket transport module.
[ 0.338081] RPC: Registered udp transport module.
[ 0.338087] RPC: Registered tcp transport module.
[ 0.338093] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338163] PCI: CLS mismatch (32 != 4), using 32 bytes
[ 0.338848] Could not remap bcsr
[ 0.342055] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 0.345037] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.355249] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.355793] fuse init (API version 7.23)
[ 0.359968] async_tx: api initialized (async)
[ 0.360067] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.360084] io scheduler noop registered
[ 0.360226] io scheduler cfq registered (default)
[ 0.362204] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.362214] crc32: self tests passed, processed 225944 bytes in 891814 nsec
[ 0.363231] crc32c: CRC_LE_BITS = 64
[ 0.363240] crc32c: self tests passed, processed 225944 bytes in 446500 nsec
[ 0.429692] crc32_combine: 8373 self tests passed
[ 0.496340] crc32c_combine: 8373 self tests passed
[ 0.496393] glob: 64 self-tests passed, 0 failed
[ 0.534682] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.535443] console [ttyS0] disabled
[ 0.555608] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A
[ 1.837753] console [ttyS0] enabled
[ 1.861879] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A
[ 1.871729] console [ttyS0] disabled
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.4.0-rc5-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #3 PREEMPT Sun Dec 20 13:24:01 AST 2015
[ 0.000000] Found legacy serial port 0 for /plb/opb/serial@ef600300
[ 0.000000] mem=4ef600300, taddr=4ef600300, irq=0, clk=11059200, speed=0
[ 0.000000] Found legacy serial port 1 for /plb/opb/serial@ef600400
[ 0.000000] mem=4ef600400, taddr=4ef600400, irq=0, clk=11059200, speed=0
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] free_area_init_node: node 0, pgdat c0a33dc8, node_mem_map eefed000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 327680 pages, LIFO batch:31
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sda8 console=ttyS0,115200 ignore_loglevel dw_dmac_core.dyndbg dw_dmac.dyndbg
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2068868K/2097152K available (6732K kernel code, 332K rwdata, 3232K rodata, 236K init, 368K bss, 28284K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000000] time_init: decrementer frequency = 1155.000010 MHz
[ 0.000000] time_init: processor frequency = 1155.000010 MHz
[ 0.000013] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns
[ 0.000024] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000035] clockevent: decrementer mult[93d70a53] shift[31] cpu[0]
[ 0.000146] Console: colour dummy device 80x25
[ 0.000175] pid_max: default: 32768 minimum: 301
[ 0.000276] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000288] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004011] devtmpfs: initialized
[ 0.006749] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.007137] xor: measuring software checksum speed
[ 0.016346] 8regs : 856.000 MB/sec
[ 0.026354] 8regs_prefetch: 784.000 MB/sec
[ 0.036385] 32regs : 1120.000 MB/sec
[ 0.046418] 32regs_prefetch: 996.000 MB/sec
[ 0.046424] xor: using function: 32regs (1120.000 MB/sec)
[ 0.046459] prandom: seed boundary self test passed
[ 0.048905] prandom: 100 self tests passed
[ 0.049444] NET: Registered protocol family 16
[ 0.052544] cpuidle: using governor ladder
[ 0.055577] cpuidle: using governor menu
[ 0.055978] 256k L2-cache enabled
[ 0.056063] PCIE0: Port disabled via device-tree
[ 0.056114] PCIE1: Checking link...
[ 0.056120] PCIE1: Device detected, waiting for link...
[ 0.056126] PCIE1: link is up !
[ 0.158410] PCI host bridge /plb/pciex@d20000000 (primary) ranges:
[ 0.158437] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.158453] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.158463] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.158486] 4xx PCI DMA offset set to 0x00000000
[ 0.158492] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158498] DMA window size 0x0000000080000000
[ 0.158522] PCIE1: successfully set as root-complex
[ 0.158588] PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
[ 0.158604] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.158618] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.158629] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.158643] 4xx PCI DMA offset set to 0x00000000
[ 0.158648] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158654] DMA window size 0x0000000080000000
[ 0.159140] PCI: Probing PCI hardware
[ 0.159241] PCI host bridge to bus 0000:80
[ 0.159259] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff])
[ 0.159273] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.159285] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.159298] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 0.159312] pci_bus 0000:80: busn_res: [bus 80-ff] end is updated to ff
[ 0.159349] pci 0000:80:00.0: [aaa1:bed1] type 01 class 0x060400
[ 0.159389] pci 0000:80:00.0: reg 0x10: [mem 0x00000000-0x7fffffff pref]
[ 0.159421] PCI: Hiding 4xx host bridge resources 0000:80:00.0
[ 0.159695] pci 0000:81:00.0: [1002:683f] type 00 class 0x030000
[ 0.159746] pci 0000:81:00.0: reg 0x10: [mem 0xea0000000-0xeafffffff 64bit pref]
[ 0.159767] pci 0000:81:00.0: reg 0x18: [mem 0xeb0000000-0xeb003ffff 64bit]
[ 0.159782] pci 0000:81:00.0: reg 0x20: [io 0xfffe2000-0xfffe20ff]
[ 0.159805] pci 0000:81:00.0: reg 0x30: [mem 0xf00100000-0xf0011ffff pref]
[ 0.159868] pci 0000:81:00.0: supports D1 D2
[ 0.159878] pci 0000:81:00.0: PME# supported from D1 D2 D3hot
[ 0.160029] pci 0000:81:00.1: [1002:aab0] type 00 class 0x040300
[ 0.160078] pci 0000:81:00.1: reg 0x10: [mem 0xf00100000-0xf00103fff 64bit]
[ 0.160161] pci 0000:81:00.1: supports D1 D2
[ 0.160286] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.160302] pci 0000:80:00.0: bridge window [io 0xfffe2000-0xfffe2fff]
[ 0.160314] pci 0000:80:00.0: bridge window [mem 0xea0000000-0xeb00fffff]
[ 0.160401] pci_bus 0000:80: busn_res: [bus 80-ff] end is updated to bf
[ 0.160493] PCI host bridge to bus 0001:00
[ 0.160507] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.160519] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.160531] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.160542] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.160553] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.160581] pci 0001:00:04.0: [1095:3512] type 00 class 0x010400
[ 0.160604] pci 0001:00:04.0: reg 0x10: [io 0x1000-0x1007]
[ 0.160617] pci 0001:00:04.0: reg 0x14: [io 0x1008-0x100b]
[ 0.160629] pci 0001:00:04.0: reg 0x18: [io 0x1010-0x1017]
[ 0.160642] pci 0001:00:04.0: reg 0x1c: [io 0x1018-0x101b]
[ 0.160654] pci 0001:00:04.0: reg 0x20: [io 0x1020-0x102f]
[ 0.160667] pci 0001:00:04.0: reg 0x24: [mem 0xd80000000-0xd800001ff]
[ 0.160680] pci 0001:00:04.0: reg 0x30: [mem 0xc0ee00000-0xc0ee7ffff pref]
[ 0.160706] pci 0001:00:04.0: supports D1 D2
[ 0.160827] pci 0001:00:06.0: [126f:0501] type 00 class 0x038000
[ 0.160851] pci 0001:00:06.0: reg 0x10: [mem 0xd84000000-0xd87ffffff]
[ 0.160863] pci 0001:00:06.0: reg 0x14: [mem 0xd88000000-0xd881fffff]
[ 0.160899] pci 0001:00:06.0: supports D1 D2
[ 0.161076] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.161167] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161179] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff]
[ 0.161190] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.161206] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161227] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit]
[ 0.161245] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref]
[ 0.161257] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit]
[ 0.161274] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.161287] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.161298] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.161309] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.161320] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161333] pci_bus 0000:80: resource 4 [io 0xfffe0000-0xfffeffff]
[ 0.161343] pci_bus 0000:80: resource 5 [mem 0xe80000000-0xeffffffff]
[ 0.161353] pci_bus 0000:80: resource 6 [mem 0xf00100000-0xf001fffff]
[ 0.161363] pci_bus 0000:81: resource 0 [io 0xfffe1000-0xfffe1fff]
[ 0.161372] pci_bus 0000:81: resource 1 [mem 0xe90000000-0xe900fffff]
[ 0.161382] pci_bus 0000:81: resource 2 [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161397] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.161410] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.161423] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref]
[ 0.161434] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.161445] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.161457] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.161468] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.161480] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.161492] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.161504] pci_bus 0001:00: resource 4 [io 0x0000-0xffff]
[ 0.161514] pci_bus 0001:00: resource 5 [mem 0xd80000000-0xdffffffff]
[ 0.161524] pci_bus 0001:00: resource 6 [mem 0xc0ee00000-0xc0eefffff]
[ 0.188262] raid6: int32x1 gen() 300 MB/s
[ 0.205415] raid6: int32x1 xor() 173 MB/s
[ 0.222442] raid6: int32x2 gen() 433 MB/s
[ 0.239489] raid6: int32x2 xor() 240 MB/s
[ 0.256581] raid6: int32x4 gen() 476 MB/s
[ 0.273660] raid6: int32x4 xor() 267 MB/s
[ 0.290716] raid6: int32x8 gen() 234 MB/s
[ 0.307887] raid6: int32x8 xor() 218 MB/s
[ 0.307894] raid6: using algorithm int32x4 gen() 476 MB/s
[ 0.307900] raid6: .... xor() 267 MB/s, rmw enabled
[ 0.307907] raid6: using intx1 recovery algorithm
[ 0.308205] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none
[ 0.308219] vgaarb: loaded
[ 0.308225] vgaarb: bridge control possible 0000:81:00.0
[ 0.308489] SCSI subsystem initialized
[ 0.308632] libata version 3.00 loaded.
[ 0.308870] usbcore: registered new interface driver usbfs
[ 0.308914] usbcore: registered new interface driver hub
[ 0.308968] usbcore: registered new device driver usb
[ 0.309064] pps_core: LinuxPPS API ver. 1 registered
[ 0.309071] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.309098] PTP clock support registered
[ 0.309245] EDAC MC: Ver: 3.0.0
[ 0.309591] Advanced Linux Sound Architecture Driver Initialized.
[ 0.329536] DMA-API: preallocated 65536 debug entries
[ 0.329549] DMA-API: debugging enabled by kernel config
[ 0.329594] clocksource: Switched to clocksource timebase
[ 0.336215] NET: Registered protocol family 2
[ 0.336799] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.336894] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 0.337234] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.337345] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.337410] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.337757] NET: Registered protocol family 1
[ 0.338072] RPC: Registered named UNIX socket transport module.
[ 0.338081] RPC: Registered udp transport module.
[ 0.338087] RPC: Registered tcp transport module.
[ 0.338093] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338163] PCI: CLS mismatch (32 != 4), using 32 bytes
[ 0.338848] Could not remap bcsr
[ 0.342055] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 0.345037] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.355249] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.355793] fuse init (API version 7.23)
[ 0.359968] async_tx: api initialized (async)
[ 0.360067] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.360084] io scheduler noop registered
[ 0.360226] io scheduler cfq registered (default)
[ 0.362204] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.362214] crc32: self tests passed, processed 225944 bytes in 891814 nsec
[ 0.363231] crc32c: CRC_LE_BITS = 64
[ 0.363240] crc32c: self tests passed, processed 225944 bytes in 446500 nsec
[ 0.429692] crc32_combine: 8373 self tests passed
[ 0.496340] crc32c_combine: 8373 self tests passed
[ 0.496393] glob: 64 self-tests passed, 0 failed
[ 0.534682] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.535443] console [ttyS0] disabled
[ 0.555608] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A
[ 1.837753] console [ttyS0] enabled
[ 1.861879] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A
[ 1.871729] console [ttyS0] disabled
[ 1.875384] 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a 16550
[ 3.182362] console [ttyS0] enabled
[ 3.186477] 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a 16550
[ 3.195850] Generic non-volatile memory driver v1.1
[ 3.201000] [drm] Initialized drm 1.1.0 20060810
[ 3.205707] [drm] radeon kernel modesetting enabled.
[ 3.211406] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x1545:0x7750).
[ 3.219400] [drm] register mmio base: 0xe90000000
[ 3.224136] [drm] register mmio size: 262144
[ 3.560222] ATOM BIOS: C44501
[ 3.563457] radeon 0000:81:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 3.572366] radeon 0000:81:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[ 3.580032] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 3.584917] [drm] RAM width 128bits DDR
[ 3.588945] [TTM] Zone kernel: Available graphics memory: 379074 kiB
[ 3.595418] [TTM] Zone highmem: Available graphics memory: 1034434 kiB
[ 3.601949] [TTM] Initializing pool allocator
[ 3.606405] [drm] radeon: 1024M of VRAM memory ready
[ 3.611387] [drm] radeon: 2048M of GTT memory ready.
[ 3.616420] [drm] Loading verde Microcode
[ 3.620472] [drm] Internal thermal controller with fan control
[ 3.626542] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 3.680136] [drm] radeon: dpm initialized
[ 3.684367] radeon 0000:81:00.0: Direct firmware load for radeon/TAHITI_vce.bin failed with error -2
[ 3.693564] radeon 0000:81:00.0: radeon_vce: Can't load firmware "radeon/TAHITI_vce.bin"
[ 3.701712] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 3.718424] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 3.777173] [drm] PCIE GART of 2048M enabled (table at 0x0000000000277000).
[ 3.784463] radeon 0000:81:00.0: WB enabled
[ 3.788698] radeon 0000:81:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xedccec00
[ 3.798794] radeon 0000:81:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xedccec04
[ 3.808889] radeon 0000:81:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xedccec08
[ 3.818984] radeon 0000:81:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xedccec0c
[ 3.829080] radeon 0000:81:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xedccec10
[ 3.869588] radeon 0000:81:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xf5135a18
[ 3.879699] radeon 0000:81:00.0: VCE init error (-22).
[ 3.884852] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.891472] [drm] Driver supports precise vblank timestamp query.
[ 3.897576] radeon 0000:81:00.0: radeon: MSI limited to 32-bit
[ 3.903490] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 3.911753] radeon 0000:81:00.0: radeon: using MSI.
[ 3.916699] [drm] radeon: irq initialized.
[ 4.675950] [drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)
[ 4.684763] radeon 0000:81:00.0: disabling GPU acceleration
[ 4.894037] [drm] Radeon Display Connectors
[ 4.898287] [drm] Connector 0:
[ 4.901358] [drm] HDMI-A-1
[ 4.904247] [drm] HPD4
[ 4.906794] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 4.914196] [drm] Encoders:
[ 4.917174] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.921453] [drm] Connector 1:
[ 4.924516] [drm] DVI-I-1
[ 4.927319] [drm] HPD2
[ 4.929859] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 4.937259] [drm] Encoders:
[ 4.940237] [drm] DFP2: INTERNAL_UNIPHY
[ 4.944430] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.061510] [drm] fb mappable at 0x80678000
[ 5.065706] [drm] vram apper at 0x80000000
[ 5.069812] [drm] size 8294400
[ 5.072876] [drm] fb depth is 24
[ 5.076114] [drm] pitch is 7680
[ 5.370437] Console: switching to colour frame buffer device 240x67
[ 5.448312] radeon 0000:81:00.0: fb0: radeondrmfb frame buffer device
[ 5.457660] [drm] Initialized radeon 2.43.0 20080528 for 0000:81:00.0 on minor 0
[ 5.474428] brd: module loaded
[ 5.482038] loop: module loaded
[ 5.485427] sata_sil 0001:00:04.0: version 2.4
[ 5.489994] sata_sil 0001:00:04.0: Applying R_ERR on DMA activate FIS errata fix
[ 5.498038] scsi host0: sata_sil
[ 5.501572] scsi host1: sata_sil
[ 5.504964] ata1: SATA max UDMA/100 mmio m512@0xd84280000 tf 0xd84280080 irq 21
[ 5.512291] ata2: SATA max UDMA/100 mmio m512@0xd84280000 tf 0xd842800c0 irq 21
[ 5.520223] PPC 4xx OCP EMAC driver, version 3.54
[ 5.525496] MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels
[ 5.531376] ZMII /plb/opb/emac-zmii@ef600d00 initialized
[ 5.536804] RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
[ 5.543961] TAH /plb/opb/emac-tah@ef601350 initialized
[ 5.549159] TAH /plb/opb/emac-tah@ef601450 initialized
[ 5.554573] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
[ 5.561717] eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:50:c2:80:d5:c5
[ 5.568618] eth0: found Generic MII PHY (0x00)
[ 5.573244] /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode
[ 5.580330] eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:00:00:00:00:00
[ 5.587232] eth1: found Generic MII PHY (0x01)
[ 5.591727] PPP generic driver version 2.4.2
[ 5.596173] PPP BSD Compression module registered
[ 5.600903] PPP Deflate Compression module registered
[ 5.605964] NET: Registered protocol family 24
[ 5.610616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.617302] ppc-of-ehci 4bffd0400.ehci: OF EHCI
[ 5.622015] ppc-of-ehci 4bffd0400.ehci: new USB bus registered, assigned bus number 1
[ 5.630449] ppc-of-ehci 4bffd0400.ehci: irq 31, io mem 0x4bffd0400
[ 5.642612] ppc-of-ehci 4bffd0400.ehci: USB 2.0 started, EHCI 1.00
[ 5.649001] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.655807] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.663036] usb usb1: Product: OF EHCI
[ 5.666794] usb usb1: Manufacturer: Linux 4.4.0-rc5-Sam460ex ehci_hcd
[ 5.673243] usb usb1: SerialNumber: PPC-OF USB
[ 5.678096] hub 1-0:1.0: USB hub found
[ 5.681946] hub 1-0:1.0: 1 port detected
[ 5.686182] ehci-pci: EHCI PCI platform driver
[ 5.690739] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.697059] ppc-of-ohci 4bffd0000.usb: OF OHCI
[ 5.701687] ppc-of-ohci 4bffd0000.usb: new USB bus registered, assigned bus number 2
[ 5.709483] ppc-of-ohci 4bffd0000.usb: irq 32, io mem 0x4bffd0000
[ 5.833620] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 5.873150] ata1.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 5.885659] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 5.904873] ata1.00: configured for UDMA/100
[ 5.927866] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1D05 PQ: 0 ANSI: 5
[ 5.941267] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.949714] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.960834] sd 0:0:0:0: [sda] Write Protect is off
[ 5.970600] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.980675] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.989752] usb 1-1: new high-speed USB device number 2 using ppc-of-ehci
[ 6.013544] sda: RDSK (512) sda1 (DOS^G)(res 2 spb 1) sda2 (SFS^@)(res 2 spb 1) sda3 (SFS^@)(res 2 spb 1) sda4 (SFS^@)(res 2 spb 1) sda5 (SFS^@)(res 2 spb 1) sda6 (SFS^@)(res 2 spb 1) sda7 (NTFS)(res 2 spb 2) sda8 (EXT^C)(res 2 spb 1)
[ 6.055924] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.116047] usb 1-1: New USB device found, idVendor=0424, idProduct=2517
[ 6.128599] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.144697] hub 1-1:1.0: USB hub found
[ 6.151782] hub 1-1:1.0: 7 ports detected
[ 6.268624] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6.297734] ata2.00: ATAPI: ASUS DRW-24B3ST i, 1.00, max UDMA/100
[ 6.314712] ata2.00: configured for UDMA/100
[ 6.330526] scsi 1:0:0:0: CD-ROM ASUS DRW-24B3ST i 1.00 PQ: 0 ANSI: 5
[ 6.373847] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.388598] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.400199] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.410668] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.435611] usb 1-1.1: new high-speed USB device number 3 using ppc-of-ehci
[ 6.444718] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.451581] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.458896] usb usb2: Product: OF OHCI
[ 6.462707] usb usb2: Manufacturer: Linux 4.4.0-rc5-Sam460ex ohci_hcd
[ 6.469188] usb usb2: SerialNumber: PPC-OF USB
[ 6.474158] hub 2-0:1.0: USB hub found
[ 6.477979] hub 2-0:1.0: 1 port detected
[ 6.482241] ohci-pci: OHCI PCI platform driver
[ 6.486969] usbcore: registered new interface driver usblp
[ 6.492720] usbcore: registered new interface driver usb-storage
[ 6.498856] usbcore: registered new interface driver usbserial
[ 6.504745] usbcore: registered new interface driver usbserial_generic
[ 6.511325] usbserial: USB Serial support registered for generic
[ 6.517646] mousedev: PS/2 mouse device common for all mice
[ 6.523317] i2c /dev entries driver
[ 6.529204] rtc-m41t80 8-0068: rtc core: registered m41t80 as rtc0
[ 6.536365] ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
[ 6.542649] ibm-iic 4ef600800.i2c: using standard (100 kHz) mode
[ 6.548793] md: linear personality registered for level -1
[ 6.554364] md: raid0 personality registered for level 0
[ 6.559718] md: raid1 personality registered for level 1
[ 6.565082] md: raid10 personality registered for level 10
[ 6.570764] md: raid6 personality registered for level 6
[ 6.576162] md: raid5 personality registered for level 5
[ 6.581568] md: raid4 personality registered for level 4
[ 6.587277] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101
[ 6.594412] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@xxxxxxxxxx
[ 6.602904] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.610274] EDAC PPC4xx MC: v1.0.0
[ 6.613721] usb 1-1.1: Product: USB 2.0 Hub
[ 6.617923] EDAC PPC4xx MC: Reporting type: interrupt
[ 6.623513] hub 1-1.1:1.0: USB hub found
[ 6.627615] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.633401] hub 1-1.1:1.0: 4 ports detected
[ 6.637840] usbcore: registered new interface driver usbhid
[ 6.643500] usbhid: USB HID core driver
[ 6.647974] usbcore: registered new interface driver snd-usb-audio
[ 6.654327] usbcore: registered new interface driver snd-ua101
[ 6.660313] usbcore: registered new interface driver snd-usb-usx2y
[ 6.667029] ipip: IPv4 over IPv4 tunneling driver
[ 6.672359] Initializing XFRM netlink socket
[ 6.677391] NET: Registered protocol family 10
[ 6.682995] sit: IPv6 over IPv4 tunneling driver
[ 6.688173] NET: Registered protocol family 17
[ 6.692666] NET: Registered protocol family 15
[ 6.697425] Running MSI bitmap self-tests ...
[ 6.703510] Key type encrypted registered
[ 6.709071] rtc-m41t80 8-0068: setting system clock to 2015-12-20 13:30:54 UTC (1450618254)
[ 6.717703] ALSA device list:
[ 6.720705] No soundcards found.
[ 6.724660] md: Waiting for all devices to be available before autodetect
[ 6.731494] md: If you don't use raid, use raid=noautodetect
[ 6.737827] md: Autodetecting RAID arrays.
[ 6.741965] md: Scanned 0 and added 0 devices.
[ 6.746419] md: autorun ...
[ 6.749223] md: ... autorun DONE.
[ 6.752620] usb 1-1.2: new low-speed USB device number 4 using ppc-of-ehci
[ 6.784922] EXT4-fs (sda8): mounting ext3 file system using the ext4 subsystem
[ 6.802166] EXT4-fs (sda8): INFO: recovery required on readonly filesystem
[ 6.809087] EXT4-fs (sda8): write access will be enabled during recovery
[ 6.854016] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 6.860945] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.868299] usb 1-1.2: Product: USB Keyboard
[ 6.872612] usb 1-1.2: Manufacturer: CHICONY
[ 6.883809] input: CHICONY USB Keyboard as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F2:0116.0001/input/input0
[ 6.946881] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-PPC-OF USB-1.2/input0
[ 6.959153] usb 1-1.1.1: new full-speed USB device number 5 using ppc-of-ehci
[ 6.967922] EXT4-fs (sda8): recovery complete
[ 6.985001] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 6.992783] VFS: Mounted root (ext3 filesystem) readonly on device 8:8.
[ 7.026165] devtmpfs: mounted
[ 7.029821] Freeing unused kernel memory: 236K (c09be000 - c09f9000)
[ 7.063753] usb 1-1.1.1: New USB device found, idVendor=0d8c, idProduct=000c
[ 7.071353] usb 1-1.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.079059] usb 1-1.1.1: Product: C-Media USB Audio Device
[ 7.108040] input: C-Media USB Audio Device as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.3/0003:0D8C:000C.0002/input/input1
[ 7.136617] usb 1-1.6: new full-speed USB device number 6 using ppc-of-ehci
[ 7.172909] hid-generic 0003:0D8C:000C.0002: input,hidraw1: USB HID v1.00 Device [C-Media USB Audio Device ] on usb-PPC-OF USB-1.1.1/input3
[ 7.232505] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c52b
[ 7.239698] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.247549] usb 1-1.6: Product: USB Receiver
[ 7.251879] usb 1-1.6: Manufacturer: Logitech
[ 7.260371] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C52B.0003/input/input2
[ 7.323893] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input0
[ 7.342219] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C52B.0004/input/input3
[ 7.405987] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input1
[ 7.422968] random: nonblocking pool is initialized
[ 7.429055] hid-generic 0003:046D:C52B.0005: hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input2
[ 7.513622] usb 1-1.7: new high-speed USB device number 7 using ppc-of-ehci
[ 7.613243] usb 1-1.7: New USB device found, idVendor=0424, idProduct=2240
[ 7.620175] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.628106] usb 1-1.7: Product: Ultra Fast Media
[ 7.633009] usb 1-1.7: Manufacturer: Generic
[ 7.637650] usb 1-1.7: SerialNumber: 000000225001
[ 7.643284] usb-storage 1-1.7:1.0: USB Mass Storage device detected
[ 7.649880] scsi host2: usb-storage 1-1.7:1.0
[ 8.198414] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 8.300902] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 8.319381] systemd[1]: Detected architecture ppc.
Welcome to Ubuntu 16.04!
[ 8.365718] systemd[1]: Set hostname to <Sam460ex>.
[ 8.655519] scsi 2:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.98 PQ: 0 ANSI: 0
[ 8.664717] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 8.672113] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 8.677837] systemd-fstab-generator[116]: Mount point is not a valid path, ignoring.
[ 8.725159] systemd[110]: /lib/systemd/system-generators/systemd-fstab-generator terminated by signal ABRT.
[ 9.616540] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 9.629970] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 9.642000] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 9.653032] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 9.664869] systemd[1]: Reached target User and Group Name Lookups.
[ OK ] Reached target User and Group Name Lookups.
[ 9.679657] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
[ 9.699056] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 9.709835] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 9.720099] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 9.746959] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 9.764360] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 9.781244] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 9.796964] systemd[1]: Started Read required files in advance.
[ OK ] Started Read required files in advance.
[ 9.866708] systemd[1]: Mounting Debug File System...
Mounting Debug File System...
[ 9.891868] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 9.909046] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 9.923848] systemd[1]: Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 9.937836] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 9.955010] systemd[1]: Starting Uncomplicated firewall...
Starting Uncomplicated firewall...
[ 9.970067] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 9.986916] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 9.998407] systemd[1]: Reached target Encrypted Volumes.
[ OK ] Reached target Encrypted Volumes.
[ 10.014911] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required st... nodes for the current kernel...
[ 10.039084] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 10.062414] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 10.076045] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 10.096121] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 10.106983] systemd[1]: Failed to start Load Kernel Modules.
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
[ 10.127780] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[ 10.136459] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 10.147588] systemd[1]: Mounting Configuration File System...
Mounting Configuration File System...
[ 10.171770] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 10.190188] systemd[1]: Mounting FUSE Control File System...
Mounting FUSE Control File System...
[ 10.244402] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ 10.270311] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 10.289802] systemd[1]: Started Uncomplicated firewall.
[ OK ] Started Uncomplicated firewall.
[ 10.533584] systemd[1]: Mounted FUSE Control File System.
[ OK ] Mounted FUSE Control File System.
[ 10.557074] systemd[1]: Mounted Configuration File System.
[ OK ] Mounted Configuration File System.
[ 10.571007] systemd[1]: Mounted Debug File System.
[ OK ] Mounted Debug File System.
[ 10.582979] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 10.613271] systemd[1]: Started Apply Kernel Variables.
[ OK ] Started Apply Kernel Variables.
[ 10.773178] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
[ 10.794464] systemd[1]: ureadahead.service: Unit entered failed state.
[ 10.801304] systemd[1]: ureadahead.service: Failed with result 'exit-code'.
[ 11.031758] systemd[1]: Started Create Static Device Nodes in /dev.
[ OK ] Started Create Static Device Nodes in /dev.
[ 11.053753] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting File System Check on Root Device...
[ OK ] Started File System Check Daemon to report status.
[ OK ] Started File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ 12.784900] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 12.795053] systemd-remount[154]: unhandled signal 11 at 0000000c nip 203a39a4 lr 203a371c code 30001
[FAILED] Failed to start Remount Root and Kernel File Systems.
See 'systemctl status systemd-remount-fs.service' for details.
[ OK ] Reached target Local File Systems (Pre).
Starting Load/Save Random Seed...
Starting Flush Journal to Persistent Storage...
Starting udev Coldplug all Devices...
[ OK ] Started Load/Save Random Seed.
[ 13.055008] systemd-journald[133]: Received request to flush runtime journal from PID 1
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ 14.368384] sata-dwc 4bffd1000.sata: ioremap done for SATA register address
[ OK ] Found device /dev/ttyS0.
[ 14.439908] sata-dwc 4bffd1000.sata: id 0, controller version 1.82
[ 14.512672] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 14.627745] sata-dwc 4bffd1000.sata: DW_PARAMS: 0x10800804
[ 14.670723] sata-dwc 4bffd1000.sata: DWC_PARAMS[0]: 0x49230b1b
[ 14.725763] sata-dwc 4bffd1000.sata: DesignWare DMA Controller, 1 channels
[ 14.762694] sata-dwc 4bffd1000.sata: sata_dwc_port_start: port_no=0
[ 14.809548] dma dma0chan0: dwc_alloc_chan_resources
[ 14.841745] dma dma0chan0: moving desc ffa0c000 to freelist
[ 14.876445] dma dma0chan0: moving desc ffa0c060 to freelist
[ 14.921276] dma dma0chan0: moving desc ffa0c0c0 to freelist
[ 14.964470] dma dma0chan0: moving desc ffa0c120 to freelist
[ 15.079296] dma dma0chan0: moving desc ffa0c180 to freelist
[ 15.114112] dma dma0chan0: moving desc ffa0c1e0 to freelist
[ 15.137708] dma dma0chan0: moving desc ffa0c240 to freelist
[ 15.163666] dma dma0chan0: moving desc ffa0c2a0 to freelist
[ 15.182164] dma dma0chan0: moving desc ffa0c300 to freelist
[ 15.201724] dma dma0chan0: moving desc ffa0c360 to freelist
[ 15.219671] dma dma0chan0: moving desc ffa0c3c0 to freelist
[ 15.240108] dma dma0chan0: moving desc ffa0c420 to freelist
[ 15.258221] dma dma0chan0: moving desc ffa0c480 to freelist
[ OK ] [ 15.281646] dma dma0chan0: moving desc ffa0c4e0 to freelist
Reached target Sound Card.
[ 15.303698] dma dma0chan0: moving desc ffa0c540 to freelist
[ 15.324628] dma dma0chan0: moving desc ffa0c5a0 to freelist
[ 15.337637] dma dma0chan0: moving desc ffa0c600 to freelist
[ 15.351633] dma dma0chan0: moving desc ffa0c660 to freelist
[ 15.368971] dma dma0chan0: moving desc ffa0c6c0 to freelist
[ OK ] Created slice syste[ 15.381513] dma dma0chan0: moving desc ffa0c720 to freelist
m-ifup.slice.
[ 15.416682] dma dma0chan0: moving desc ffa0c780 to freelist
[ OK ] Found device /sys/subsystem/net/devices/eth0.
[ 15.459033] dma dma0chan0: moving desc ffa0c7e0 to freelist
[ 15.501662] dma dma0chan0: moving desc ffa0c840 to freelist
[ 15.532653] dma dma0chan0: moving desc ffa0c8a0 to freelist
[ 15.582851] dma dma0chan0: moving desc ffa0c900 to freelist
[ 15.632695] dma dma0chan0: moving desc ffa0c960 to freelist
[ 15.673581] dma dma0chan0: moving desc ffa0c9c0 to freelist
[ 15.721666] dma dma0chan0: moving desc ffa0ca20 to freelist
[ 15.751309] dma dma0chan0: moving desc ffa0ca80 to freelist
[ 15.781667] dma dma0chan0: moving desc ffa0cae0 to freelist
[ 15.815651] dma dma0chan0: moving desc ffa0cb40 to freelist
[ 15.851693] dma dma0chan0: moving desc ffa0cba0 to freelist
[ 15.896656] dma dma0chan0: moving desc ffa0cc00 to freelist
[ 15.942782] dma dma0chan0: moving desc ffa0cc60 to freelist
[ 16.007672] dma dma0chan0: moving desc ffa0ccc0 to freelist
[ OK ] Found device WDC_WD5000AAKS-00V1A0 NTFS.
[ 16.090507] dma dma0chan0: moving desc ffa0cd20 to freelist
[ 16.159658] dma dma0chan0: moving desc ffa0cd80 to freelist
Mounting /media/NTFS...
[ 16.240647] dma dma0chan0: moving desc ffa0cde0 to freelist
[ 16.314691] dma dma0chan0: moving desc ffa0ce40 to freelist
[ 16.372678] dma dma0chan0: moving desc ffa0cea0 to freelist
[ 16.437024] dma dma0chan0: moving desc ffa0cf00 to freelist
[ 16.467026] dma dma0chan0: moving desc ffa0cf60 to freelist
[ 16.526705] dma dma0chan0: moving desc ffa0d000 to freelist
[ 16.581372] dma dma0chan0: moving desc ffa0d060 to freelist
[ 16.623690] dma dma0chan0: moving desc ffa0d0c0 to freelist
[ 16.666401] dma dma0chan0: moving desc ffa0d120 to freelist
[ 16.699750] dma dma0chan0: moving desc ffa0d180 to freelist
[ 16.738776] dma dma0chan0: moving desc ffa0d1e0 to freelist
[ 16.781696] dma dma0chan0: moving desc ffa0d240 to freelist
[ 16.822544] dma dma0chan0: moving desc ffa0d2a0 to freelist
[ 16.872354] dma dma0chan0: moving desc ffa0d300 to freelist
[ 16.912212] dma dma0chan0: moving desc ffa0d360 to freelist
[ 16.953597] dma dma0chan0: moving desc ffa0d3c0 to freelist
[ 16.991684] dma dma0chan0: moving desc ffa0d420 to freelist
[ 17.032723] dma dma0chan0: moving desc ffa0d480 to freelist
[ 17.083692] dma dma0chan0: moving desc ffa0d4e0 to freelist
[ OK ] Mounted /media/NTFS.
[ 17.163810] dma dma0chan0: moving desc ffa0d540 to freelist
32m OK ] Reached target Local File Systems.
Starting LSB: AppArmor initialization...
Starting Clean up any mess left by 0dns-up...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Wait for all "auto" /etc/n... up for network-online.target...
Starting Create Volatile Files and Directories...
[ 17.334683] dma dma0chan0: moving desc ffa0d5a0 to freelist
[ 17.403183] dma dma0chan0: moving desc ffa0d600 to freelist
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shut[ 17.497944] dma dma0chan0: moving desc ffa0d660 to freelist
down...
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ 17.629289] dma dma0chan0: moving desc ffa0d6c0 to freelist
[ 17.691590] dma dma0chan0: moving desc ffa0d720 to freelist
[ 17.746676] dma dma0chan0: moving desc ffa0d780 to freelist
[ 17.797816] dma dma0chan0: moving desc ffa0d7e0 to freelist
[ 17.835660] dma dma0chan0: dwc_alloc_chan_resources: allocated 64 descriptors
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ 17.912649] dmaengine: __dma_request_channel: success (dma0chan0)
[ 17.951854] sata-dwc 4bffd1000.sata: sata_dwc_port_start: clearing TXCHEN, RXCHEN in DMAC
[ OK ] Started Clean up any mess left by 0dns-up.
Starting Nameserver information manager...
[ 18.070651] sata-dwc 4bffd1000.sata: sata_dwc_port_start: setting burst size in DBTSR
[ 18.196668] sata-dwc 4bffd1000.sata: sata_dwc_port_start: done
[ 18.209685] scsi host3: sata-dwc
[ 18.209901] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000000
[ 18.209908] ata3: SATA max UDMA/133 irq 36
[ 18.209984] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000000
[ 18.209992] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000000
[ 18.210000] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000301
[ 18.210007] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
[ 18.211671] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
[ 18.211680] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000300
[ 18.412685] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 18.412694] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.418735] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.424689] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.430671] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.436679] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.448729] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.454699] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.460693] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.466677] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.472686] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.478679] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.484682] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.490686] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.504345] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.509673] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515688] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515697] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 18.515705] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 18.515712] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515728] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 18.515735] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515743] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515750] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515769] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 18.515775] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 18.515782] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515789] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 18.515795] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515802] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.515812] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515837] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 18.515844] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 18.515852] dma dma0chan0: dwc_prep_slave_sg
[ 18.515859] dma dma0chan0: scanned 1 descriptors on freelist
[ 18.515868] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c88, count: 1 addr: 0xfffffffff6a18400
[ 18.518791] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 18.518801] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 18.518808] dma dma0chan0: dwc_prep_slave_sg
[ 18.518814] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 18.527820] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 18.527830] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 18.527836] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 18.527843] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 18.527891] ata3.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133
[ 18.527898] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 1/32)
[ 18.527939] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 18.527947] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 18.527954] dma dma0chan0: dwc_prep_slave_sg
[ 18.527960] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 18.530728] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 18.530738] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 18.530745] dma dma0chan0: dwc_prep_slave_sg
[ 18.530753] dma dma0chan0: scanned 1 descriptors on freelist
[ 18.530762] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 18.533800] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 18.533809] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 18.533816] dma dma0chan0: dwc_prep_slave_sg
[ 18.533822] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 18.534763] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 18.534772] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 18.534779] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 18.534786] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 18.534844] ata3.00: configured for UDMA/133
[ 18.538182] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5
[ 18.539025] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 18.539236] sd 3:0:0:0: [sdc] Write Protect is off
[ 18.539245] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 18.539338] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.540049] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 18.540362] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 18.540370] dma dma0chan0: dwc_prep_slave_sg
[ 18.540378] dma dma0chan0: scanned 1 descriptors on freelist
[ 18.540387] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed37f200, count: 1 addr: 0xfffffffff6a18400
[ 18.540395] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue: tag=0 ap->link.sactive = 0x00000001 sactive=0x00000001
[ 18.540426] sata-dwc 4bffd1000.sata: sata_dwc_exec_command_by_tag cmd(0x60): READ FPDMA QUEUED tag=0
[ 18.556592] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x00000082 active_tag=-84148995
[ 18.556599] sata-dwc 4bffd1000.sata: sata_dwc_isr: NEWFP tag=0
[ 18.556609] sata-dwc 4bffd1000.sata: sata_dwc_bmdma_start_by_tag qc=ed2180b8 tag: 0 cmd: 0x60 dma_dir: from device start_dma? 1
[ 18.556616] sata-dwc 4bffd1000.sata: taskfile cmd: 0x60 protocol: ATA NCQ flags: 0x17 device: 40
[ 18.556623] sata-dwc 4bffd1000.sata: feature: 0x08 nsect: 0x0 lbal: 0x0 lbam: 0x0 lbah: 0x0
[ 18.556631] sata-dwc 4bffd1000.sata: hob_feature: 0x00 hob_nsect: 0x0 hob_lbal: 0x0 hob_lbam: 0x0 hob_lbah: 0x0
[ 18.556639] dma dma0chan0: dwc_tx_submit: queued 2
[ 18.556646] dma dma0chan0: dwc_dostart_first_queued: started 2
[ OK ] Started Nameserver information manager.
[ OK ] Started LSB: AppArmor initialization.
[ OK ] Started ifup for eth0.
Starting LSB: Raise network interfaces....
[ 21.434701] eth0: link is up, 1000 FDX, pause enabled
Starting LSB: start Samba SMB/CIFS daemon (smbd)...
[ OK ] Started LSB: start Samba SMB/CIFS daemon (smbd).
[ OK ] Started Wait for all "auto" /etc/ne...be up for network-online.target.
[** ] A start job is running for LSB: Rai...ork interfaces. (32s / no limit)
[* ] A start job is running for LSB: Rai...ork interfaces. (33s / no limit)
[** ] A start job is running for LSB: Rai...ork interfaces. (33s / no limit)
[*** ] A start job is running for LSB: Rai...ork interfaces. (34s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (34s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (35s / no limit)
[ ***] A start job is running for LSB: Rai...ork interfaces. (35s / no limit)
[ **] A start job is running for LSB: Rai...ork interfaces. (36s / no limit)
[ *] A start job is running for LSB: Rai...ork interfaces. (36s / no limit)
[ **] A start job is running for LSB: Rai...ork interfaces. (37s / no limit)
[ ***] A start job is running for LSB: Rai...ork interfaces. (37s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (38s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (38s / no limit)[ 48.748634] ata3: lost interrupt (Status 0x40)
[ 48.753465] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 48.761369] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 48.769671] ata3.00: failed command: READ FPDMA QUEUED
[ 48.775573] ata3.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 48.775573] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
;31[ 48.790815] ata3.00: status: { DRDY }
m*[ 48.790838] ata3: hard resetting link
48.790852] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
0;[ 48.790860] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
1;[ 48.790886] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000301
31[ 48.790892] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
m*[ 48.794722] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
48.794729] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000300
0m* ] A start job is running for LSB: Rai...ork interfaces. (39s / no limit)[ 48.995623] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 49.003501] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.018630] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.031627] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.044684] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.057631] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.070627] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.083627] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.096627] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.109627] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.117516] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 49.127031] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 49.135034] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.144511] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 49.154001] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.163472] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.171394] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.180909] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 49.188822] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 49.198390] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.206314] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 49.215822] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.223737] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 49.231040] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.238957] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.248440] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.262617] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 49.271495] dma dma0chan0: dwc_prep_slave_sg
[ 49.275775] dma dma0chan0: scanned 1 descriptors on freelist
[ 49.281445] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[**[ 49.295512] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.311143] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 49.319412] dma dma0chan0: dwc_prep_slave_sg
[ 49.323691] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 49.332355] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 49.339821] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 49.348439] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 49.355150] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
] A start job is running for LSB: Rai...ork interfaces. (39s / no limit)[ 49.373094] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.387366] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 49.395635] dma dma0chan0: dwc_prep_slave_sg
[ 49.399906] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 49.411833] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.426012] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 49.434888] dma dma0chan0: dwc_prep_slave_sg
[ 49.439160] dma dma0chan0: scanned 1 descriptors on freelist
[ 49.444830] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 49.458577] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.474154] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 49.482424] dma dma0chan0: dwc_prep_slave_sg
[ 49.486702] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 49.495358] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 49.502763] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 49.511382] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 49.518092] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 49.526146] ata3.00: configured for UDMA/133
[ 49.530497] ata3.00: device reported invalid CHS sector 0
[ 49.535990] ata3: EH complete
[ 49.539247] ------------[ cut here ]------------
[ 49.543870] WARNING: at drivers/ata/libata-core.c:5051
[ 49.549007] Modules linked in: input_leds led_class sata_dwc_460ex
[ 49.555264] CPU: 0 PID: 293 Comm: scsi_eh_3 Not tainted 4.4.0-rc5-Sam460ex #3
[ 49.562405] task: ed271140 ti: ed2e0000 task.ti: ed2e0000
[ 49.567802] NIP: c043bbe0 LR: c0440d58 CTR: c0442bd4
[ 49.572767] REGS: ed2e1c70 TRAP: 0700 Not tainted (4.4.0-rc5-Sam460ex)
[ 49.579554] MSR: 00021000 <CE,ME> CR: 22000048 XER: 00000000
[ 49.585474]
GPR00: c0440d58 ed2e1d20 ed271140 ed2180b8 ed219a48 00000000 00000000 00000000
GPR08: 00000006 00000004 00000001 ed2e1d50 28000022 00000000 00000005 00002710
GPR16: c04264b4 c0944a03 c08fb4b8 c094492f c09020db ed145c1c 0000001e 00000000
GPR24: ed1450e0 ed1fa9a0 edc485b0 c0442bd4 ed218000 ed2197c8 ed218000 ed2180b8
[ 49.615694] NIP [c043bbe0] ata_qc_issue+0x4c/0x3a0
[ 49.620487] LR [c0440d58] ata_scsi_translate+0xf4/0x150
[ 49.625709] Call Trace:
[ 49.628162] [ed2e1d20] [c0442d6c] ata_scsi_rw_xlat+0x198/0x1e4 (unreliable)
[ 49.635148] [ed2e1d50] [c0440d58] ata_scsi_translate+0xf4/0x150
[ 49.641086] [ed2e1d70] [c0444154] ata_scsi_queuecmd+0x1e8/0x238
[ 49.647024] [ed2e1d90] [c04251f0] scsi_dispatch_cmd+0xd4/0x110
[ 49.652875] [ed2e1da0] [c0427b70] scsi_request_fn+0x52c/0x55c
[ 49.658641] [ed2e1df0] [c024cd34] __blk_run_queue+0x44/0x58
[ 49.664236] [ed2e1e00] [c024cf30] blk_run_queue+0x28/0x44
[ 49.669653] [ed2e1e10] [c0425d4c] scsi_run_queue+0x240/0x268
[ 49.675331] [ed2e1e50] [c0427bd8] scsi_run_host_queues+0x30/0x44
[ 49.681346] [ed2e1e60] [c0424e18] scsi_error_handler+0x3e0/0x44c
[ 49.687369] [ed2e1ed0] [c0039798] kthread+0xc8/0xcc
[ 49.692269] [ed2e1f40] [c000b0d0] ret_from_kernel_thread+0x5c/0x64
[ 49.698460] Instruction dump:
[ 49.701447] 815e0004 83a90000 89230014 814a0058 2f8a0000 419e0038 815d0120 2b8a001f
[ 49.709328] 419d002c 3d40c0a3 894a575b 694a0001 <0f0a0000> 2f8a0000 41be0014 3d40c0a3
[ 49.717386] ---[ end trace 0b0316debe3b1cf8 ]---
[ 49.722024] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 49.730904] dma dma0chan0: dwc_prep_slave_sg
[ 49.735176] dma dma0chan0: scanned 1 descriptors on freelist
[ 49.740846] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed37f200, count: 1 addr: 0xfffffffff6a18400
[ 49.750419] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue: tag=0 ap->link.sactive = 0x00000001 sactive=0x00000001
[ 49.760450] sata-dwc 4bffd1000.sata: sata_dwc_exec_command_by_tag cmd(0x60): READ FPDMA QUEUED tag=0
[ 49.774412] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x00000082 active_tag=0
[ 49.781740] sata-dwc 4bffd1000.sata: sata_dwc_isr: NEWFP tag=0
[ 49.787583] sata-dwc 4bffd1000.sata: sata_dwc_bmdma_start_by_tag qc=ed2180b8 tag: 0 cmd: 0x60 dma_dir: from device start_dma? 1
[ 49.799064] sata-dwc 4bffd1000.sata: taskfile cmd: 0x60 protocol: ATA NCQ flags: 0x17 device: 40
[ 49.807849] sata-dwc 4bffd1000.sata: feature: 0x08 nsect: 0x0 lbal: 0x0 lbam: 0x0 lbah: 0x0
[ 49.816200] sata-dwc 4bffd1000.sata: hob_feature: 0x00 hob_nsect: 0x0 hob_lbal: 0x0 hob_lbam: 0x0 hob_lbah: 0x0
[ 49.826296] dma dma0chan0: dwc_tx_submit: queued 3
[* ] A start job is running for LSB: Rai...ork interfaces. (40s / no limit)
[** ] A start job is running for LSB: Rai...ork interfaces. (40s / no limit)
[*** ] A start job is running for LSB: Rai...ork interfaces. (41s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (41s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (42s / no limit)
[ ***] A start job is running for LSB: Rai...ork interfaces. (42s / no limit)
[ **] A start job is running for LSB: Rai...ork interfaces. (43s / no limit)
[ *] A start job is running for LSB: Rai...ork interfaces. (43s / no limit)
[ **] A start job is running for LSB: Rai...ork interfaces. (44s / no limit)
[ ***] A start job is running for LSB: Rai...ork interfaces. (44s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (45s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (45s / no limit)
[*** ] A start job is running for LSB: Rai...ork interfaces. (46s / no limit)
[** ] A start job is running for LSB: Rai...ork interfaces. (46s / no limit)
[* ] A start job is running for LSB: Rai...ork interfaces. (47s / no limit)
[** ] A start job is running for LSB: Rai...ork interfaces. (47s / no limit)
[*** ] A start job is running for LSB: Rai...ork interfaces. (48s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (48s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (49s / no limit)
[ ***] A start job is running for LSB: Rai...ork interfaces. (49s / no limit)
[ **] A start job is running for LSB: Rai...ork interfaces. (50s / no limit)
[ *] A start job is running for LSB: Rai...ork interfaces. (50s / no limit)
[ **] A start job is running for LSB: Rai...ork interfaces. (51s / no limit)
[ ***] A start job is running for LSB: Rai...ork interfaces. (51s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (52s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (52s / no limit)
[*** ] A start job is running for LSB: Rai...ork interfaces. (53s / no limit)
[** ] A start job is running for LSB: Rai...ork interfaces. (53s / no limit)
[* ] A start job is running for LSB: Rai...ork interfaces. (54s / no limit)
[** ] A start job is running for LSB: Rai...ork interfaces. (54s / no limit)
[*** ] A start job is running for LSB: Rai...ork interfaces. (55s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (55s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (56s / no limit)
[ ***] A start job is running for LSB: Rai...ork interfaces. (56s / no limit)
[ **] A start job is running for LSB: Rai...ork interfaces. (57s / no limit)
[ *] A start job is running for LSB: Rai...ork interfaces. (57s / no limit)
[ **] A start job is running for LSB: Rai...ork interfaces. (58s / no limit)
[ ***] A start job is running for LSB: Rai...ork interfaces. (58s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (59s / no limit)
[ *** ] A start job is running for LSB: Rai...ork interfaces. (59s / no limit)
[*** ] A start job is running for LSB: Rai...rk interfaces. (1min / no limit)
[** ] A start job is running for LSB: Rai...rk interfaces. (1min / no limit)
[* ] A start job is running for LSB: Rai...interfaces. (1min 1s / no limit)
[** ] A start job is running for LSB: Rai...interfaces. (1min 1s / no limit)
[*** ] A start job is running for LSB: Rai...interfaces. (1min 2s / no limit)
[ *** ] A start job is running for LSB: Rai...interfaces. (1min 2s / no limit)
[ *** ] A start job is running for LSB: Rai...interfaces. (1min 3s / no limit)
[ ***] A start job is running for LSB: Rai...interfaces. (1min 3s / no limit)
[ **] A start job is running for LSB: Rai...interfaces. (1min 4s / no limit)
[ *] A start job is running for LSB: Rai...interfaces. (1min 4s / no limit)
[ **] A start job is running for LSB: Rai...interfaces. (1min 5s / no limit)
[ ***] A start job is running for LSB: Rai...interfaces. (1min 5s / no limit)
[ *** ] A start job is running for LSB: Rai...interfaces. (1min 6s / no limit)
[ *** ] A start job is running for LSB: Rai...interfaces. (1min 6s / no limit)
[*** ] A start job is running for LSB: Rai...interfaces. (1min 7s / no limit)
[** ] A start job is running for LSB: Rai...interfaces. (1min 7s / no limit)
[* ] A start job is running for LSB: Rai...interfaces. (1min 8s / no limit)
[** ] A start job is running for LSB: Rai...interfaces. (1min 8s / no limit)
[*** ] A start job is running for LSB: Rai...interfaces. (1min 9s / no limit)
[ *** ] A start job is running for LSB: Rai...interfaces. (1min 9s / no limit)[ 79.724633] ata3: lost interrupt (Status 0x40)
[ 79.729536] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 79.737456] ata3.00: NCQ disabled due to excessive errors
[ 79.744035] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 79.751166] ata3.00: failed command: READ FPDMA QUEUED
[ 79.756753] ata3.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 79.756753] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.771407] ata3.00: status: { DRDY }
79.776177] ata3: hard resetting link
K[[ 79.780060] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
* 79.789323] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
1m*[ 79.797374] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000301
* ] A st[ 79.807363] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
art job is running[ 79.816704] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
f[ 79.824736] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000300
or LSB: Rai...nterfaces. (1min 10s / no limit)[ 80.035631] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 80.043514] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.058630] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.071628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.084630] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.097628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.110628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.123629] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.136628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.149628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.157505] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 80.166975] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 80.174978] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.184508] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 80.194002] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.203499] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.211422] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.220946] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 80.228862] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 80.238418] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.246343] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x000003
[ *] A start job is running for LSB: Rai...nterfaces. (1min 11s / no limit)
[ **] A start job is running for LSB: Rai...nterfaces. (1min 12s / no limit)
[ ***] A start job is running for LSB: Rai...nterfaces. (1min 12s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 13s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 13s / no limit)
[*** ] A start job is running for LSB: Rai...nterfaces. (1min 14s / no limit)
[** ] A start job is running for LSB: Rai...nterfaces. (1min 14s / no limit)
[* ] A start job is running for LSB: Rai...nterfaces. (1min 15s / no limit)
[** ] A start job is running for LSB: Rai...nterfaces. (1min 15s / no limit)
[*** ] A start job is running for LSB: Rai...nterfaces. (1min 16s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 16s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 17s / no limit)
[ ***] A start job is running for LSB: Rai...nterfaces. (1min 17s / no limit)
[ **] A start job is running for LSB: Rai...nterfaces. (1min 18s / no limit)
[ *] A start job is running for LSB: Rai...nterfaces. (1min 18s / no limit)
[ **] A start job is running for LSB: Rai...nterfaces. (1min 19s / no limit)
[ ***] A start job is running for LSB: Rai...nterfaces. (1min 19s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 20s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 20s / no limit)
[*** ] A start job is running for LSB: Rai...nterfaces. (1min 21s / no limit)
[** ] A start job is running for LSB: Rai...nterfaces. (1min 21s / no limit)
[* ] A start job is running for LSB: Rai...nterfaces. (1min 22s / no limit)
[** ] A start job is running for LSB: Rai...nterfaces. (1min 22s / no limit)
[*** ] A start job is running for LSB: Rai...nterfaces. (1min 23s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 23s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 24s / no limit)
[ ***] A start job is running for LSB: Rai...nterfaces. (1min 24s / no limit)
[ **] A start job is running for LSB: Rai...nterfaces. (1min 25s / no limit)
[ *] A start job is running for LSB: Rai...nterfaces. (1min 25s / no limit)
[ **] A start job is running for LSB: Rai...nterfaces. (1min 26s / no limit)
[ ***] A start job is running for LSB: Rai...nterfaces. (1min 26s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 27s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 27s / no limit)
[*** ] A start job is running for LSB: Rai...nterfaces. (1min 28s / no limit)
[** ] A start job is running for LSB: Rai...nterfaces. (1min 28s / no limit)
[* ] A start job is running for LSB: Rai...nterfaces. (1min 29s / no limit)
[** ] A start job is running for LSB: Rai...nterfaces. (1min 29s / no limit)
[*** ] A start job is running for LSB: Rai...nterfaces. (1min 30s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 30s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 31s / no limit)
[ ***] A start job is running for LSB: Rai...nterfaces. (1min 31s / no limit)
[ **] A start job is running for LSB: Rai...nterfaces. (1min 32s / no limit)
[ *] A start job is running for LSB: Rai...nterfaces. (1min 32s / no limit)
[ **] A start job is running for LSB: Rai...nterfaces. (1min 33s / no limit)
[ ***] A start job is running for LSB: Rai...nterfaces. (1min 33s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 34s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 34s / no limit)
[*** ] A start job is running for LSB: Rai...nterfaces. (1min 35s / no limit)
[** ] A start job is running for LSB: Rai...nterfaces. (1min 35s / no limit)
[* ] A start job is running for LSB: Rai...nterfaces. (1min 36s / no limit)
[** ] A start job is running for LSB: Rai...nterfaces. (1min 36s / no limit)
[*** ] A start job is running for LSB: Rai...nterfaces. (1min 37s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 37s / no limit)
[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 38s / no limit)
[ ***] A start job is running for LSB: Rai...nterfaces. (1min 38s / no limit)
[ **] A start job is running for LSB: Rai...nterfaces. (1min 39s / no limit)
[ *] A start job is running for LSB: Rai...nterfaces. (1min 39s / no limit)
[ **] A start job is running for LSB: Rai...nterfaces. (1min 40s / no limit)
[ ***] A start job is running for LSB: Rai...nterfaces. (1min 40s / no limit)[ 110.764630] ata3: lost interrupt (Status 0x50)
[ 110.770729] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ [ 110.778767] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
** 110.788782] ata3: limiting SATA link speed to 1.5 Gbps
;3[ 110.794156] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
1m* [ 110.801914] ata3.00: failed command: READ DMA
] [ 110.806437] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 110.806437] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
A start [ 110.821727] ata3.00: status: { DRDY }
job is [ 110.825984] ata3: hard resetting link
runn[ 110.829905] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
ing for LSB: Rai.[ 110.839297] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
..n[ 110.847359] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000304
terfaces. (1min 41s / no[ 110.857372] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000304
li[ 110.865453] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000314
mit)[ 110.875490] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000314
[ 110.883443] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ [ 205.804214] ata3: lost interrupt (Status 0x50)
[ 205.812254] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 205.829280] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 205.847215] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 205.864228] ata3.00: failed command: READ DMA
[ 205.886299] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 205.886299] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 205.928198] ata3.00: status: { DRDY }
[ 205.936199] ata3: hard resetting link
[ 205.944209] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 205.961211] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 205.978234] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 205.996205] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 206.016218] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 206.031246] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 206.249218] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 206.265258] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.288222] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.309232] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.331206] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.353207] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.374234] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.390195] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 206.407209] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 206.425203] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.441609] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 206.462289] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.480232] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.497210] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.516214] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 206.532219] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 206.550186] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.567188] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 206.585204] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.602194] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 206.616233] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.629948] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.638108] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 206.652285] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 206.661166] dma dma0chan0: dwc_prep_slave_sg
[ 206.665446] dma dma0chan0: scanned 1 descriptors on freelist
[ 206.671116] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 206.690289] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 206.705867] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 206.714135] dma dma0chan0: dwc_prep_slave_sg
[ 206.718413] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 206.727070] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 206.734474] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 206.743092] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 206.749794] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 206.809267] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 206.823541] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 206.831809] dma dma0chan0: dwc_prep_slave_sg
[ 206.836087] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 206.850944] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 206.865129] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 206.874005] dma dma0chan0: dwc_prep_slave_sg
[ 206.878285] dma dma0chan0: scanned 1 descriptors on freelist
[ 206.883954] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 206.903285] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 206.918862] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 206.927129] dma dma0chan0: dwc_prep_slave_sg
[ 206.931408] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 206.940064] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 206.947469] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 206.956087] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 206.962789] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 207.020254] ata3.00: configured for UDMA/33
[ 207.031768] ata3.00: device reported invalid CHS sector 0
[ 207.043222] sd 3:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 207.061244] sd 3:0:0:0: [sdc] tag#0 Sense Key : 0x5 [current] [descriptor]
[ 207.077229] sd 3:0:0:0: [sdc] tag#0 ASC=0x21 ASCQ=0x4
[ 207.089269] sd 3:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
[ 207.108222] blk_update_request: I/O error, dev sdc, sector 0
[ 207.122229] Buffer I/O error on dev sdc, logical block 0, async page read
[ 207.137508] ata3: EH complete
[ 207.145553] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 207.154443] dma dma0chan0: dwc_prep_slave_sg
[ 207.158719] dma dma0chan0: scanned 1 descriptors on freelist
[ 207.164388] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 237.803993] ata3: lost interrupt (Status 0x50)
[ 237.811990] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 237.831015] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 237.850803] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 237.866982] ata3.00: failed command: READ DMA
[ 237.878740] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 237.878740] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 237.926703] ata3.00: status: { DRDY }
[ 237.934826] ata3: hard resetting link
[ 237.944972] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 237.963503] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 237.984026] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 238.000998] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 238.024001] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 238.038977] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 238.261980] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 238.282997] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.306975] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.327949] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.348981] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.369987] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.390974] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.405964] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 238.423934] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 238.440995] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.457941] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 238.480031] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.499012] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.516000] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.536988] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 238.552997] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 238.568966] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.585990] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 238.603985] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.621983] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 238.634973] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.652001] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.669001] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 238.683194] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 238.692069] dma dma0chan0: dwc_prep_slave_sg
[ 238.696348] dma dma0chan0: scanned 1 descriptors on freelist
[ 238.702019] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 238.759979] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 238.775554] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 238.783823] dma dma0chan0: dwc_prep_slave_sg
[ 238.788101] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 238.796755] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 238.804161] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 238.812780] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 238.819491] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 238.874029] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 238.888306] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 238.896574] dma dma0chan0: dwc_prep_slave_sg
[ 238.900852] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 238.948972] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 238.963159] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 238.972035] dma dma0chan0: dwc_prep_slave_sg
[ 238.976314] dma dma0chan0: scanned 1 descriptors on freelist
[ 238.981984] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 239.047000] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 239.062578] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 239.070845] dma dma0chan0: dwc_prep_slave_sg
[ 239.075123] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 239.083792] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 239.091193] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 239.099811] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 239.106513] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 239.159993] ata3.00: configured for UDMA/33
[ 239.170009] ata3.00: device reported invalid CHS sector 0
[ 239.182000] ata3: EH complete
[ 239.188999] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 239.197887] dma dma0chan0: dwc_prep_slave_sg
[ 239.202164] dma dma0chan0: scanned 1 descriptors on freelist
[ 239.207834] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 269.806747] ata3: lost interrupt (Status 0x50)
[ 269.814786] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 269.828313] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 269.836215] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 269.846547] ata3.00: failed command: READ DMA
[ 269.851025] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 269.851025] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 269.868224] ata3.00: status: { DRDY }
[ 269.874166] ata3: hard resetting link
[ 269.880202] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 269.888210] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 269.898231] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 269.911767] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 269.930705] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 269.938565] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 270.149682] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 270.157543] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.173682] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.186670] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.199672] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.212672] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.225672] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.241679] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.254671] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.267671] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.277113] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 270.285113] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 270.295227] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.303153] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 270.314710] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.322600] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.332543] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.343601] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 270.353191] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 270.361174] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.371172] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 270.379265] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.389290] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 270.395560] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.404986] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.412895] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 270.427068] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 270.435948] dma dma0chan0: dwc_prep_slave_sg
[ 270.440229] dma dma0chan0: scanned 1 descriptors on freelist
[ 270.445899] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 270.459802] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 270.475380] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 270.483647] dma dma0chan0: dwc_prep_slave_sg
[ 270.487918] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 270.496568] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 270.503971] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 270.512588] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 270.519290] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 270.536410] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 270.550683] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 270.558952] dma dma0chan0: dwc_prep_slave_sg
[ 270.563231] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 270.577594] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 270.591787] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 270.600662] dma dma0chan0: dwc_prep_slave_sg
[ 270.604942] dma dma0chan0: scanned 1 descriptors on freelist
[ 270.610612] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 270.624793] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 270.640371] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 270.648639] dma dma0chan0: dwc_prep_slave_sg
[ 270.652917] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 270.661659] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 270.669066] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 270.677684] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 270.684387] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 270.750334] ata3.00: configured for UDMA/33
[ 270.754591] ata3.00: device reported invalid CHS sector 0
[ 270.761021] ata3: EH complete
[ 270.764650] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 270.773538] dma dma0chan0: dwc_prep_slave_sg
[ 270.777815] dma dma0chan0: scanned 1 descriptors on freelist
[ 270.783485] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 301.035525] ata3: lost interrupt (Status 0x50)
[ 301.045475] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 301.072471] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.095537] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 301.119475] ata3.00: failed command: READ DMA
[ 301.135460] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 301.135460] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 301.178470] ata3.00: status: { DRDY }
[ 301.191515] ata3: hard resetting link
[ 301.204516] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 301.229499] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 301.252489] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 301.281470] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 301.307465] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 301.330447] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 301.557484] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 301.579469] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.607462] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.634442] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.660437] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.688490] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.708499] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 301.732465] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 301.749469] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.767476] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 301.788471] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.806467] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.824466] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.842547] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 301.859628] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 301.878486] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.895501] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 301.913476] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.931476] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 301.944485] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.962514] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.980581] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 301.994772] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 302.003648] dma dma0chan0: dwc_prep_slave_sg
[ 302.007928] dma dma0chan0: scanned 1 descriptors on freelist
[ 302.013597] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 302.082479] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 302.098053] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 302.106322] dma dma0chan0: dwc_prep_slave_sg
[ 302.110600] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 302.119266] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 302.126669] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 302.135288] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 302.141998] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 302.210501] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 302.224773] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 302.233040] dma dma0chan0: dwc_prep_slave_sg
[ 302.237319] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 302.337140] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 302.351326] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 302.360203] dma dma0chan0: dwc_prep_slave_sg
[ 302.364482] dma dma0chan0: scanned 1 descriptors on freelist
[ 302.370151] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 302.482263] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 302.497845] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 302.506113] dma dma0chan0: dwc_prep_slave_sg
[ 302.510391] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 302.519048] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 302.526453] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 302.535071] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 302.541782] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 302.641338] ata3.00: configured for UDMA/33
[ 302.655066] ata3.00: device reported invalid CHS sector 0
[ 302.671340] ata3: EH complete
[ 302.682403] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 302.691299] dma dma0chan0: dwc_prep_slave_sg
[ 302.695575] dma dma0chan0: scanned 1 descriptors on freelist
[ 302.701245] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 304.475842] systemd-fstab-generator[1544]: Mount point is not a valid path, ignoring.
[ 333.035211] ata3: lost interrupt (Status 0x50)
[ 333.041036] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 333.058733] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.073826] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 333.080926] ata3.00: failed command: READ DMA
[ 333.086272] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 333.086272] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 333.100904] ata3.00: status: { DRDY }
[ 333.105483] ata3: hard resetting link
[ 333.109191] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 333.118620] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 333.126522] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 333.136662] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 333.146561] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 333.164401] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 333.380201] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 333.388069] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.405187] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.418179] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.431179] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.445179] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.464956] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.485201] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.498178] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.507654] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 333.515551] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 333.525693] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.533606] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 333.545235] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.553133] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.571868] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.586532] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 333.594403] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 333.604711] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.612889] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 333.623031] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.631034] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 333.638972] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.646881] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.656930] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 333.671115] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 333.679993] dma dma0chan0: dwc_prep_slave_sg
[ 333.684274] dma dma0chan0: scanned 1 descriptors on freelist
[ 333.689943] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 333.712304] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 333.727880] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 333.736147] dma dma0chan0: dwc_prep_slave_sg
[ 333.740426] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 333.749086] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 333.756487] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 333.765105] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 333.771808] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 333.795131] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 333.809407] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 333.817675] dma dma0chan0: dwc_prep_slave_sg
[ 333.821954] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 333.842307] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 333.856499] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 333.865375] dma dma0chan0: dwc_prep_slave_sg
[ 333.869655] dma dma0chan0: scanned 1 descriptors on freelist
[ 333.875324] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 333.897596] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 333.913174] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 333.921443] dma dma0chan0: dwc_prep_slave_sg
[ 333.925721] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 333.934376] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 333.941782] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 333.950401] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 333.957111] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 333.976320] ata3.00: configured for UDMA/33
[ 333.990244] ata3.00: device reported invalid CHS sector 0
[ 333.997438] ata3: EH complete
[ 334.000798] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 334.009682] dma dma0chan0: dwc_prep_slave_sg
[ 334.013960] dma dma0chan0: scanned 1 descriptors on freelist
[ 334.019631] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 364.074997] ata3: lost interrupt (Status 0x50)
[ 364.080422] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 364.088311] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.098397] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 364.105521] ata3.00: failed command: READ DMA
[ 364.110721] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 364.110721] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 364.125966] ata3.00: status: { DRDY }
[ 364.129669] ata3: hard resetting link
[ 364.134087] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 364.141956] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 364.151973] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 364.169453] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 364.185972] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 364.193835] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 364.404960] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 364.412818] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.428946] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.441938] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.454940] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.477975] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.490940] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.503938] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.516938] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.526406] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 364.534308] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 364.544450] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.552368] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 364.574519] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.587242] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.595116] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.605334] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 364.613333] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 364.624185] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.632274] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 364.642673] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.650618] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 364.658461] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.676303] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.690919] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 364.705111] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 364.713985] dma dma0chan0: dwc_prep_slave_sg
[ 364.718266] dma dma0chan0: scanned 1 descriptors on freelist
[ 364.723936] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 364.738059] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 364.753633] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 364.761903] dma dma0chan0: dwc_prep_slave_sg
[ 364.766181] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 364.774855] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 364.782259] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 364.790877] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 364.797579] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 364.829477] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 364.843748] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 364.852015] dma dma0chan0: dwc_prep_slave_sg
[ 364.856285] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 364.869331] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 364.883521] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 364.892398] dma dma0chan0: dwc_prep_slave_sg
[ 364.896678] dma dma0chan0: scanned 1 descriptors on freelist
[ 364.902346] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 364.926069] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 364.941647] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 364.949915] dma dma0chan0: dwc_prep_slave_sg
[ 364.954193] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 364.962855] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 364.970254] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 364.978872] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 364.985575] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 365.009141] ata3.00: configured for UDMA/33
[ 365.013402] ata3.00: device reported invalid CHS sector 0
[ 365.027037] ata3: EH complete
[ 365.034834] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 365.043729] dma dma0chan0: dwc_prep_slave_sg
[ 365.048005] dma dma0chan0: scanned 1 descriptors on freelist
[ 365.053675] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 396.074726] ata3: lost interrupt (Status 0x50)
[ 396.080426] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 396.088353] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.098535] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 396.105660] ata3.00: failed command: READ DMA
[ 396.110870] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 396.110870] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 396.136202] ata3.00: status: { DRDY }
[ 396.143199] ata3: hard resetting link
[ 396.147554] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 396.157166] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 396.165064] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 396.175324] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 396.185076] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 396.192973] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 396.403714] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 396.411577] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.427695] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.450730] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.463692] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.476692] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.489691] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.502691] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.515692] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.525133] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 396.533031] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 396.550755] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.566387] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 396.575836] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.586086] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.593991] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.604072] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 396.611976] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 396.622103] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.630291] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 396.640936] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.658807] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 396.671545] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.679555] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.689807] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 396.703989] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 396.712866] dma dma0chan0: dwc_prep_slave_sg
[ 396.717146] dma dma0chan0: scanned 1 descriptors on freelist
[ 396.722815] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 396.736788] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 396.752366] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 396.760635] dma dma0chan0: dwc_prep_slave_sg
[ 396.764914] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 396.773571] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 396.780974] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 396.789592] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 396.796295] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 396.828253] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 396.842523] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 396.850791] dma dma0chan0: dwc_prep_slave_sg
[ 396.855070] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 396.868286] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 396.882470] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 396.891347] dma dma0chan0: dwc_prep_slave_sg
[ 396.895626] dma dma0chan0: scanned 1 descriptors on freelist
[ 396.901296] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 396.923817] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 396.939398] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 396.947666] dma dma0chan0: dwc_prep_slave_sg
[ 396.951944] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 396.960594] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 396.967997] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 396.976615] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 396.983317] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 397.008136] ata3.00: configured for UDMA/33
[ 397.012438] ata3.00: device reported invalid CHS sector 0
[ 397.027023] sd 3:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 397.042006] sd 3:0:0:0: [sdc] tag#0 Sense Key : 0x5 [current] [descriptor]
[ 397.049012] sd 3:0:0:0: [sdc] tag#0 ASC=0x21 ASCQ=0x4
[ 397.056588] sd 3:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
[ 397.064237] blk_update_request: I/O error, dev sdc, sector 0
[ 397.071627] Buffer I/O error on dev sdc, logical block 0, async page read
[ 397.078502] Dev sdc: unable to read RDB block 0
[ 397.084033] ata3: EH complete
[ 397.087612] sdc: unable to read partition table
[ 397.094132] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 397.103026] dma dma0chan0: dwc_prep_slave_sg
[ 397.107302] dma dma0chan0: scanned 1 descriptors on freelist
[ 397.112972] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed37fa00, count: 1 addr: 0xfffffffff6a18400
[ 428.074483] ata3: lost interrupt (Status 0x50)
[ 428.080190] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 428.088108] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.098163] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 428.105285] ata3.00: failed command: READ DMA EXT
[ 428.110996] ata3.00: cmd 25/00:08:80:5f:38/00:00:3a:00:00/e0 tag 0 dma 4096 in
[ 428.110996] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 428.125637] ata3.00: status: { DRDY }
[ 428.130285] ata3: hard resetting link
[ 428.144994] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 428.157723] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 428.165601] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 428.176050] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 428.185840] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 428.193744] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 428.404466] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 428.412323] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.428447] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.445520] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.466468] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.479445] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.492444] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.505445] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.518445] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.527891] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 428.535791] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 428.553510] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.569148] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 428.578597] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.588823] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.596725] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.606787] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 428.614693] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 428.624871] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.632959] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 428.643628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.661695] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 428.673855] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.681738] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.692080] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 428.706263] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 428.715140] dma dma0chan0: dwc_prep_slave_sg
[ 428.719419] dma dma0chan0: scanned 1 descriptors on freelist
[ 428.725089] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 428.739567] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 428.755144] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 428.763413] dma dma0chan0: dwc_prep_slave_sg
[ 428.767691] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 428.776347] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 428.783752] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 428.792370] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 428.799072] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 428.830958] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 428.845231] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 428.853499] dma dma0chan0: dwc_prep_slave_sg
[ 428.857778] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 428.870730] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 428.884918] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 428.893794] dma dma0chan0: dwc_prep_slave_sg
[ 428.898074] dma dma0chan0: scanned 1 descriptors on freelist
[ 428.903744] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 428.926568] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 428.942149] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 428.950418] dma dma0chan0: dwc_prep_slave_sg
[ 428.954696] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 428.963354] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 428.970757] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 428.979376] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 428.986086] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 429.010965] ata3.00: configured for UDMA/33
[ 429.015249] ata3.00: device reported invalid CHS sector 0
[ 429.029948] ata3: EH complete
[ 429.036692] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 429.045587] dma dma0chan0: dwc_prep_slave_sg
[ 429.049863] dma dma0chan0: scanned 1 descriptors on freelist
[ 429.055533] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed37fa00, count: 1 addr: 0xfffffffff6a18400
