On Thu, Nov 19, 2015 at 11:41:14AM +0900, Jaedon Shin wrote:
> Add quirk for broken ncq. Some chipsets (eg. BCM7349A0, BCM7445A0,
> BCM7445B0, and all 40nm chipsets including BCM7425) need a workaround
> disabling NCQ.
>
> Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx>
> Tested-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> Acked-by: Brian Norris <computersforpeace@xxxxxxxxx>
> ---
> drivers/ata/ahci_brcmstb.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
> index 73e3b0b2a3c2..3bf1cf6259d7 100644
> --- a/drivers/ata/ahci_brcmstb.c
> +++ b/drivers/ata/ahci_brcmstb.c
> @@ -69,10 +69,15 @@
> (DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
> (MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
>
> +enum brcm_ahci_quirks {
> + BRCM_AHCI_QUIRK_NONCQ = BIT(0),
> +};
> +
> struct brcm_ahci_priv {
> struct device *dev;
> void __iomem *top_ctrl;
> u32 port_mask;
> + u32 quirks;
> };
>
> static const struct ata_port_info ahci_brcm_port_info = {
> @@ -202,6 +207,42 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
> return impl;
> }
>
> +static void brcm_sata_quirks(struct platform_device *pdev,
> + struct brcm_ahci_priv *priv)
> +{
> + if (priv->quirks & BRCM_AHCI_QUIRK_NONCQ) {
> + void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
> + void __iomem *ahci;
> + struct resource *res;
> + u32 reg;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "ahci");
> + ahci = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(ahci))
> + return;
> +
> + reg = brcm_sata_readreg(ctrl);
> + reg |= OVERRIDE_HWINIT;
> + brcm_sata_writereg(reg, ctrl);
> +
> + /* Clear out the NCQ bit so the AHCI driver will not issue
> + * FPDMA/NCQ commands.
> + */
> + reg = brcm_sata_readreg(ahci + HOST_CAP);
> + reg &= ~HOST_CAP_NCQ;
> + brcm_sata_writereg(reg, ahci + HOST_CAP);
> +
> + reg = brcm_sata_readreg(ctrl);
> + reg &= ~OVERRIDE_HWINIT;
> + brcm_sata_writereg(reg, ctrl);
> +
> + devm_iounmap(&pdev->dev, ahci);
> + devm_release_mem_region(&pdev->dev, res->start,
> + resource_size(res));
You missed Tejun's suggestion:
http://article.gmane.org/gmane.linux.ide/60602
This can all be killed and replaced with
hpriv->flags |= AHCI_HFLAG_NO_NCQ;
And you need to move brcm_sata_quirks() after
ahci_platform_get_resources(). (It makes sense there anyway, despite
whatever the original Broadcom BSP did.)
Brian
> + }
> +}
> +
> static void brcm_sata_init(struct brcm_ahci_priv *priv)
> {
> /* Configure endianness */
> @@ -256,6 +297,11 @@ static int brcm_ahci_probe(struct platform_device *pdev)
> if (IS_ERR(priv->top_ctrl))
> return PTR_ERR(priv->top_ctrl);
>
> + if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci"))
> + priv->quirks |= BRCM_AHCI_QUIRK_NONCQ;
> +
> + brcm_sata_quirks(pdev, priv);
> +
> brcm_sata_init(priv);
>
> priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
> --
> 2.6.3
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
