Add quirk for phy interface of MIPS-based chipsets. The ARM-based
chipsets have four phy interface control registers and each port has two
registers but the MIPS-based chipsets have three. There are no
information and documentation.
The Broadcom strict-ahci based BSP of legacy version did not control
these registers.
Signed-off-by: Jaedon Shin <jaedon.shin@xxxxxxxxx>
---
drivers/ata/ahci_brcmstb.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index 194aeda8f14d..5098e6c041ac 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -71,6 +71,7 @@
enum brcm_ahci_quirks {
BRCM_AHCI_QUIRK_NONCQ = BIT(0),
+ BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1),
};
struct brcm_ahci_priv {
@@ -119,6 +120,9 @@ static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
void __iomem *p;
u32 reg;
+ if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
+ return;
+
/* clear PHY_DEFAULT_POWER_STATE */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
reg = brcm_sata_readreg(p);
@@ -148,6 +152,9 @@ static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
void __iomem *p;
u32 reg;
+ if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
+ return;
+
/* power-off the PHY digital logic */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
reg = brcm_sata_readreg(p);
@@ -297,8 +304,10 @@ static int brcm_ahci_probe(struct platform_device *pdev)
if (IS_ERR(priv->top_ctrl))
return PTR_ERR(priv->top_ctrl);
- if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci"))
+ if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) {
priv->quirks |= BRCM_AHCI_QUIRK_NONCQ;
+ priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
+ }
brcm_sata_quirks(pdev, priv);
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
