Linux IDE Archive

• Thread Index

• Re: [REGRESSION] 8a3e33cf92c7 "ata: ahci: find eSATA ports and flag them as removable" changes userspace behavior
  • From: Tejun Heo
• Re: [PATCH V3] AHCI: Workaround for ThunderX Errata#22536
  • From: Tirumalesh Chalamarla
• Re: [REGRESSION] 8a3e33cf92c7 "ata: ahci: find eSATA ports and flag them as removable" changes userspace behavior
  • From: Laura Abbott
• Re: [REGRESSION] 8a3e33cf92c7 "ata: ahci: find eSATA ports and flag them as removable" changes userspace behavior
  • From: Manuel Lauss
• Re: [REGRESSION] 8a3e33cf92c7 "ata: ahci: find eSATA ports and flag them as removable" changes userspace behavior
  • From: Manuel Lauss
• Re: [REGRESSION] 8a3e33cf92c7 "ata: ahci: find eSATA ports and flag them as removable" changes userspace behavior
  • From: Manuel Lauss
• Re: [RFC PATCH] sata_via: Implement hotplug for VT6421
  • From: Tejun Heo
• Re: M2/NVM vs M2/Sata vs SATA/6GB benchmarks
  • From: Marc MERLIN
• Re: [PATCH v2] sata_via: Apply WD workaround only when needed on VT6421
  • From: Tejun Heo
• [REGRESSION] 8a3e33cf92c7 "ata: ahci: find eSATA ports and flag them as removable" changes userspace behavior
  • From: Laura Abbott
• [RFC PATCH] sata_via: Implement hotplug for VT6421
  • From: Ondrej Zary
• Re: [PATCH] SATA: rcar: add device tree support for r8a7792
  • From: Simon Horman
• Re: [PATCH v4 12/12] arm64: defconfig: enable Armada 3700 related config
  • From: Olof Johansson
• [PATCH] SATA: rcar: add device tree support for r8a7792
  • From: Simon Horman
• [PATCH] libata: Align ata_device's id on a cacheline
  • From: Harvey Hunt
• rcar_sata DMA warnings on Salvator-X
  • From: Geert Uytterhoeven
• Re: [PATCH V3] AHCI: Workaround for ThunderX Errata#22536
  • From: Tirumalesh Chalamarla
• Re: [RFC PATCH] drivers: ata: Read Rx water mark value from device-tree
  • From: Rob Herring
• RE: [RFC PATCH] drivers: ata: Read Rx water mark value from device-tree
  • From: Anurag Kumar Vulisha
• Re: [RFC PATCH] drivers: ata: Read Rx water mark value from device-tree
  • From: Arnd Bergmann
• RE: [RFC PATCH] drivers: ata: Read Rx water mark value from device-tree
  • From: Anurag Kumar Vulisha
• Re: [RFC PATCH] drivers: ata: Read Rx water mark value from device-tree
  • From: Arnd Bergmann
• RE: [RFC PATCH] drivers: ata: Read Rx water mark value from device-tree
  • From: Anurag Kumar Vulisha
• another Dell-Seagate ticky-ticky
  • From: Andrew Jacks
• Re: [RFC PATCH] drivers: ata: Read Rx water mark value from device-tree
  • From: Arnd Bergmann
• [RFC PATCH] drivers: ata: Read Rx water mark value from device-tree
  • From: Anurag Kumar Vulisha
• [PATCH v2] sata_via: Apply WD workaround only when needed on VT6421
  • From: Ondrej Zary
• [PATCH] sata_via: Apply WD workaround only when needed on VT6421
  • From: Ondrej Zary
• Re: [PATCH libata/for-4.6] libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show()
  • From: Tejun Heo
• Re: [PATCH 0/7] Runtime PM support for AHCI host controller driver
  • From: Tejun Heo
• Re: [PATCH 0/7] Runtime PM support for AHCI host controller driver
  • From: Jens Axboe
• Re: [PATCH 0/7] Runtime PM support for AHCI host controller driver
  • From: Mika Westerberg
• Re: [PATCH 3/7] scsi: Drop runtime PM usage count after host is added
  • From: Mika Westerberg
• Re: [PATCH libata/for-4.6] libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show()
  • From: Elias Oltmanns
• Re: [PATCH 3/7] scsi: Drop runtime PM usage count after host is added
  • From: Julian Calaby
• Re: [PATCH v4 04/12] ata: ahci_mvebu: add support for Armada 3700 variant
  • From: Tejun Heo
• Re: [PATCH v4 04/12] ata: ahci_mvebu: add support for Armada 3700 variant
  • From: Gregory CLEMENT
• Re: [PATCH v4 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Gregory CLEMENT
• [PATCH libata/for-4.6] libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show()
  • From: Tejun Heo
• Re: [PATCH] pata-rb532-cf: get rid of the irq_to_gpio() call
  • From: Arnd Bergmann
• Re: [PATCH 0/7] Runtime PM support for AHCI host controller driver
  • From: Tejun Heo
• Re: [PATCH] Adding Intel Lewisburg device IDs for SATA
  • From: Tejun Heo
• Re: [PATCH] pata-rb532-cf: get rid of the irq_to_gpio() call
  • From: Tejun Heo
• Re: [PATCH 5/7] ahci: Convert driver to use modern PM hooks
  • From: Christoph Hellwig
• Re: [PATCH 5/7] ahci: Convert driver to use modern PM hooks
  • From: Tejun Heo
• Re: [PATCH 5/7] ahci: Convert driver to use modern PM hooks
  • From: Andy Shevchenko
• Re: [PATCH] pata-rb532-cf: get rid of the irq_to_gpio() call
  • From: Gabor Juhos
• Re: libata: Implement disk shock protection support
  • From: Elias Oltmanns
• [PATCH 0/7] Runtime PM support for AHCI host controller driver
  • From: Mika Westerberg
• [PATCH 3/7] scsi: Drop runtime PM usage count after host is added
  • From: Mika Westerberg
• [PATCH 7/7] ahci: Add runtime PM support for the host controller
  • From: Mika Westerberg
• [PATCH 5/7] ahci: Convert driver to use modern PM hooks
  • From: Mika Westerberg
• [PATCH 6/7] ahci: Add functions to manage runtime PM of AHCI ports
  • From: Mika Westerberg
• [PATCH 4/7] ahci: Cache host controller version
  • From: Mika Westerberg
• [PATCH 2/7] scsi: Set request queue runtime PM status back to active on resume
  • From: Mika Westerberg
• [PATCH 1/7] block: Add blk_set_runtime_active()
  • From: Mika Westerberg
• [PATCH] Adding Intel Lewisburg device IDs for SATA
  • From: Alexandra Yates
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Tirumalesh Chalamarla
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: David Daney
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Tejun Heo
• re: libata: Implement disk shock protection support
  • From: Dan Carpenter
• Re: [RFC PATCH] sata_via: Apply WD workaround only when needed
  • From: Tejun Heo
• Re: [PATCH V3] AHCI: Workaround for ThunderX Errata#22536
  • From: Thomas Gleixner
• Re: [PATCH v4 00/12] Add support for the Armada 3700 SoC an mvebu ARM64 based
  • From: Gregory CLEMENT
• Re: [PATCH] pata-rb532-cf: get rid of the irq_to_gpio() call
  • From: Alban
• [PATCH] pata-rb532-cf: get rid of the irq_to_gpio() call
  • From: Gabor Juhos
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Will Deacon
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Tirumalesh Chalamarla
• Re: [RFC PATCH] sata_via: Apply WD workaround only when needed
  • From: Ondrej Zary
• Re: [RFC PATCH] sata_via: Apply WD workaround only when needed
  • From: Tejun Heo
• Re: [PATCH v4 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Arnd Bergmann
• Re: [PATCH v4 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Thomas Petazzoni
• Re: [PATCH v4 00/12] Add support for the Armada 3700 SoC an mvebu ARM64 based
  • From: Arnd Bergmann
• Re: [PATCH v4 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Arnd Bergmann
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Robert Richter
• [PATCH V3] AHCI: Workaround for ThunderX Errata#22536
  • From: tchalamarla
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Tirumalesh Chalamarla
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: David Daney
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Tirumalesh Chalamarla
• Re: [PATCH v3 02/12] irqchip: armada-370-xp: do not enable it by default when ARCH_MVEBU is selected
  • From: Jason Cooper
• [PATCH v4 02/12] irqchip: armada-370-xp: do not enable it by default when ARCH_MVEBU is selected
  • From: Gregory CLEMENT
• [PATCH v4 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Gregory CLEMENT
• [PATCH v4 04/12] ata: ahci_mvebu: add support for Armada 3700 variant
  • From: Gregory CLEMENT
• [PATCH v4 05/12] arm64: add mvebu architecture entry
  • From: Gregory CLEMENT
• [PATCH v4 06/12] Documentation: dt-bindings: Add a new compatible for the Armada 3700
  • From: Gregory CLEMENT
• [PATCH v4 08/12] devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
  • From: Gregory CLEMENT
• [PATCH v4 07/12] Documentation: dt: Tidy up the Marvell related files
  • From: Gregory CLEMENT
• [PATCH v4 09/12] arm64: dts: add the Marvell Armada 3700 family and a development board
  • From: Gregory CLEMENT
• [PATCH v4 10/12] MAINTAINERS: Extend dts entry for ARM64 mvebu files
  • From: Gregory CLEMENT
• [PATCH v4 12/12] arm64: defconfig: enable Armada 3700 related config
  • From: Gregory CLEMENT
• [PATCH v4 11/12] Documentation: arm: update supported Marvell EBU processors
  • From: Gregory CLEMENT
• [PATCH v4 01/12] irqchip: armada-370-xp: add Kconfig option for the driver
  • From: Gregory CLEMENT
• [PATCH v4 00/12] Add support for the Armada 3700 SoC an mvebu ARM64 based
  • From: Gregory CLEMENT
• Re: [PATCH v3 05/12] arm64: add mvebu architecture entry
  • From: Gregory CLEMENT
• Re: [PATCH v3 09/12] arm64: dts: add the Marvell Armada 3700 family and a development board
  • From: Gregory CLEMENT
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Robert Richter
• Re: [PATCH v3 09/12] arm64: dts: add the Marvell Armada 3700 family and a development board
  • From: Jisheng Zhang
• Re: [PATCH v3 05/12] arm64: add mvebu architecture entry
  • From: Jisheng Zhang
• [RFC PATCH] sata_via: Apply WD workaround only when needed
  • From: Ondrej Zary
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Tejun Heo
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Tirumalesh Chalamarla
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Tejun Heo
• Re: M2/NVM vs M2/Sata vs SATA/6GB benchmarks
  • From: Matthew Wilcox
• M2/NVM vs M2/Sata vs SATA/6GB benchmarks
  • From: Marc MERLIN
• Re: [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: Sergei Shtylyov
• [PATCH V2] AHCI: Workaround for ThunderX Errata#22536
  • From: tchalamarla
• Re: [PATCH v3 08/12] devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
  • From: Rob Herring
• Re: [Patch v9] SATA: OCTEON: support SATA on OCTEON platform
  • From: Zubair Lutfullah Kakakhel
• Re: [Patch v9] SATA: OCTEON: support SATA on OCTEON platform
  • From: Ralf Baechle
• Re: [Patch v9] SATA: OCTEON: support SATA on OCTEON platform
  • From: Tejun Heo
• Re: [PATCH] libata: fix HDIO_GET_32BIT ioctl
  • From: Tejun Heo
• Re: [Patch v9] SATA: OCTEON: support SATA on OCTEON platform
  • From: Arnd Bergmann
• [Patch v9] SATA: OCTEON: support SATA on OCTEON platform
  • From: Zubair Lutfullah Kakakhel
• [PATCH] libata: fix HDIO_GET_32BIT ioctl
  • From: Arnd Bergmann
• Re: compat_hdio_ioctl() question
  • From: Arnd Bergmann
• Re: compat_hdio_ioctl() question
  • From: Soohoon Lee
• Re: compat_hdio_ioctl() question
  • From: Arnd Bergmann
• Re: [PATCH v4 0/3] ata: Fixes related to edge trigger latch for the ahci_xgene_driver.
  • From: Suman Tripathi
• Re: [PATCH v4 0/3] ata: Fixes related to edge trigger latch for the ahci_xgene_driver.
  • From: Tejun Heo
• Re: [PATCH v4 0/3] ata: Fixes related to edge trigger latch for the ahci_xgene_driver.
  • From: Suman Tripathi
• Re: [PATCH v4 0/3] ata: Fixes related to edge trigger latch for the ahci_xgene_driver.
  • From: Tejun Heo
• Re: [PATCH v4 0/3] ata: Fixes related to edge trigger latch for the ahci_xgene_driver.
  • From: Suman Tripathi
• Re: [PATCH v8] SATA: OCTEON: support SATA on OCTEON platform
  • From: David Daney
• Re: [PATCH v8] SATA: OCTEON: support SATA on OCTEON platform
  • From: Tejun Heo
• [GIT PULL] libata fixes for v4.5-rc3
  • From: Tejun Heo
• Re: [PATCH] Intel DNV device IDs SATA
  • From: Tejun Heo
• Re: [PATCH v4 0/3] ata: Fixes related to edge trigger latch for the ahci_xgene_driver.
  • From: Tejun Heo
• Re: [PATCH v8] SATA: OCTEON: support SATA on OCTEON platform
  • From: Tejun Heo
• Re: [PATCH v3 00/12] Add support for the Armada 3700 SoC an mvebu ARM64 based
  • From: Arnd Bergmann
• Re: [PATCH v3 01/12] irqchip: armada-370-xp: add Kconfig option for the driver
  • From: Arnd Bergmann
• [PATCH v8] SATA: OCTEON: support SATA on OCTEON platform
  • From: Zubair Lutfullah Kakakhel
• [Bug 111901] Pre-2008 boards may fail to enable PATA device(s) via pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• Re: [PATCH v7] SATA: OCTEON: support SATA on OCTEON platform
  • From: Rob Herring
• [PATCH v3 05/12] arm64: add mvebu architecture entry
  • From: Gregory CLEMENT
• [PATCH v3 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Gregory CLEMENT
• [PATCH v3 02/12] irqchip: armada-370-xp: do not enable it by default when ARCH_MVEBU is selected
  • From: Gregory CLEMENT
• [PATCH v3 04/12] ata: ahci_mvebu: add support for Armada 3700 variant
  • From: Gregory CLEMENT
• [PATCH v3 07/12] Documentation: dt: Tidy up the Marvell related files
  • From: Gregory CLEMENT
• [PATCH v3 06/12] Documentation: dt-bindings: Add a new compatible for the Armada 3700
  • From: Gregory CLEMENT
• [PATCH v3 01/12] irqchip: armada-370-xp: add Kconfig option for the driver
  • From: Gregory CLEMENT
• [PATCH v3 09/12] arm64: dts: add the Marvell Armada 3700 family and a development board
  • From: Gregory CLEMENT
• [PATCH v3 08/12] devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
  • From: Gregory CLEMENT
• [PATCH v3 11/12] Documentation: arm: update supported Marvell EBU processors
  • From: Gregory CLEMENT
• [PATCH v3 10/12] MAINTAINERS: Extend dts entry for ARM64 mvebu files
  • From: Gregory CLEMENT
• [PATCH v3 12/12] arm64: defconfig: enable Armada 3700 related config
  • From: Gregory CLEMENT
• [PATCH v3 00/12] Add support for the Armada 3700 SoC an mvebu ARM64 based
  • From: Gregory CLEMENT
• [PATCH] ide: icside: remove incorrect initconst annotation
  • From: Arnd Bergmann
• Re: [PATCH v2 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Gregory CLEMENT
• Re: [PATCH v2 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Greg Kroah-Hartman
• [PATCH v4 3/3] ahci_xgene: Implement the workaround to fix the missing of the edge interrupt for the HOST_IRQ_STAT.
  • From: suman Tripathi
• [PATCH v4 2/3] ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.
  • From: suman Tripathi
• [PATCH v4 0/3] ata: Fixes related to edge trigger latch for the ahci_xgene_driver.
  • From: suman Tripathi
• [PATCH v4 1/3] libahci: Implement the capability to override the generic ahci interrupt handler.
  • From: suman Tripathi
• [Bug 111901] Pre-2008 boards may fail to enable PATA device(s) via pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• [Bug 111901] Pre-2008 boards may not enable PATA device(s) via pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• [PATCH] Intel DNV device IDs SATA
  • From: Alexandra Yates
• [Bug 111901] Pre-2008 boards may show errors in pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• [Bug 111901] Pre-2008 boards may show errors in pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• [Bug 111901] Pre-2008 boards may show errors in pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• [Bug 111901] Pre-2008 boards may show errors in pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• Re: [PATCH v3 1/3] libahci: Implement the capability to override the generic ahci interrupt handler.
  • From: Suman Tripathi
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• Re: [PATCH] AHCI: Workaround for ThunderX Errata#22536
  • From: Tejun Heo
• Re: [PATCH v3 1/3] libahci: Implement the capability to override the generic ahci interrupt handler.
  • From: Tejun Heo
• Re: [PATCH v2 08/12] devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
  • From: Gregory CLEMENT
• Re: [PATCH v7] SATA: OCTEON: support SATA on OCTEON platform
  • From: Arnd Bergmann
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Arnd Bergmann
• Re: [PATCH v3 1/3] libahci: Implement the capability to override the generic ahci interrupt handler.
  • From: Sergei Shtylyov
• [Bug 111901] Pre-2008 boards may show errors in pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• [Bug 111901] Pre-2008 boards may show errors in pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• [Bug 111901] Pre-2008 boards may show errors in pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• [Bug 111901] Pre-2008 boards may show errors in pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [Bug 111901] Pre-2008 boards may show errors in pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• [Bug 111901] New: Pre-2008 boards may show errors in pata_amd | pata_acpi unless CRS is turned off by pci=nocrs
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [PATCH v3 2/3] libahci: ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.
  • From: suman Tripathi
• [PATCH v3 1/3] libahci: Implement the capability to override the generic ahci interrupt handler.
  • From: suman Tripathi
• [PATCH v3 0/3] ata: Fixes related to edge trigger latch for the ahci_xgene_driver.
  • From: suman Tripathi
• [PATCH v3 3/3] ahci_xgene: Implement the workaround to fix the missing of edge interrupt for HOST_IRQ_STAT.
  • From: suman Tripathi
• Re: [PATCH v7] SATA: OCTEON: support SATA on OCTEON platform
  • From: Zubair Lutfullah Kakakhel
• Re: [RFT PATCH] powerpc: convert amigaone_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFT PATCH] arm: omap1_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFT PATCH] arm: collie_defconfig: convert to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 01/19] ide: remove deprecated atiixp host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 02/19] ide: remove deprecated cs5520 host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 04/19] ide: remove deprecated cs5535 host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 05/19] ide: remove deprecated cs5536 host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 06/19] ide: remove deprecated sc1200 host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 07/19] ide: remove deprecated delkin_cb host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 08/19] ide: remove deprecated it8213 host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 09/19] ide: remove deprecated it821x host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 10/19] ide: remove deprecated jmicron host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 12/19] ide: remove deprecated pdc202xx_old host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 14/19] ide: remove deprecated serverworks host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 13/19] ide: remove deprecated rz1000 host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 11/19] ide: remove deprecated opti621 host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 18/19] ide: remove deprecated ide-pnp host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 17/19] ide: remove deprecated triflex host driver
  • From: Bartlomiej Zolnierkiewicz
• [RC PATCH 19/19] ide: remove deprecated icside host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 15/19] ide: remove deprecated sis5513 host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 16/19] ide: remove deprecated slc90e66 host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 03/19] ide: remove deprecated cs5530 host driver
  • From: Bartlomiej Zolnierkiewicz
• [RFC PATCH 00/19] ide: remove deprecated host drivers (part 1)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v7] SATA: OCTEON: support SATA on OCTEON platform
  • From: Aleksey Makarov
• RE: [PATCH v2 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Ofer Heifetz
• [PATCH] AHCI: Workaround for ThunderX Errata#22536
  • From: tchalamarla
• Re: [PATCH v2 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Marcin Wojtas
• Re: [PATCH v2 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Thomas Petazzoni
• Re: [PATCH v2 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Marcin Wojtas
• Re: [RFT PATCH] powerpc: convert amigaone_defconfig to use libata PATA drivers
  • From: Gerhard Pircher
• Re: [PATCH v2 08/12] devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
  • From: Thomas Petazzoni
• Re: [PATCH v2 08/12] devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
  • From: Rob Herring
• [PATCH v2 04/12] ata: ahci_mvebu: add support for Armada 3700 variant
  • From: Gregory CLEMENT
• [PATCH v2 03/12] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Gregory CLEMENT
• [PATCH v2 02/12] irqchip: armada-370-xp: do not enable it by default when ARCH_MVEBU is selected
  • From: Gregory CLEMENT
• [PATCH v2 08/12] devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
  • From: Gregory CLEMENT
• [PATCH v2 05/12] arm64: add mvebu architecture entry
  • From: Gregory CLEMENT
• [PATCH v2 06/12] Documentation: dt-bindings: Add a new compatible for the Armada 3700
  • From: Gregory CLEMENT
• [PATCH v2 07/12] Documentation: dt: Tidy up the Marvell related files
  • From: Gregory CLEMENT
• [PATCH v2 09/12] arm64: dts: add the Marvell Armada 3700 family and a development board
  • From: Gregory CLEMENT
• [PATCH v2 01/12] irqchip: armada-370-xp: add Kconfig option for the driver
  • From: Gregory CLEMENT
• [PATCH v2 10/12] MAINTAINERS: Extend dts entry for ARM64 mvebu files
  • From: Gregory CLEMENT
• [PATCH v2 11/12] Documentation: arm: update supported Marvell EBU processors
  • From: Gregory CLEMENT
• [PATCH v2 12/12] arm64: defconfig: enable Armada 3700 related config
  • From: Gregory CLEMENT
• [PATCH v2 00/12] Add support for the Armada 3700 SoC an mvebu ARM64 based
  • From: Gregory CLEMENT
• [PATCH v7] SATA: OCTEON: support SATA on OCTEON platform
  • From: Zubair Lutfullah Kakakhel
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Mark Rutland
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Gregory CLEMENT
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Gregory CLEMENT
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Gregory CLEMENT
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Gregory CLEMENT
• Re: [PATCH v6] SATA: OCTEON: support SATA on OCTEON platform
  • From: Arnd Bergmann
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Gregory CLEMENT
• Re: [PATCH v6] SATA: OCTEON: support SATA on OCTEON platform
  • From: Zubair Lutfullah Kakakhel
• [PATCH] powerpc/85xx: disable IDE subsystem in stx_gp3_defconfig
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc/85xx: convert tqm8540_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc/85xx: convert tqm8541_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc/85xx: convert mpc85xx_cds_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc/85xx: convert tqm8560_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc/86xx: convert gef_ppc9a_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc/86xx: convert gef_sbc310_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] powerpc/86xx: disable IDE subsystem in mpc8610_hpcd_defconfig
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc: convert amigaone_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc: convert cell_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc: convert chrp32_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc: convert g5_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc: convert maple_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] powerpc: disable IDE subsystem in pasemi_defconfig
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc: convert pmac32_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc: convert ppc64_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc: convert ppc64e_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc: convert ppc6xx_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc: convert pseries_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc: convert storcenter_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] powerpc: disable IDE subsystem in pq2fads_defconfig
  • From: Bartlomiej Zolnierkiewicz
• [RFT PATCH] powerpc/85xx: convert tqm8555_defconfig to use libata PATA drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] powerpc/85xx: disable IDE subsystem in ksi8560_defconfig
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] powerpc/83xx: disable IDE subsystem in mpc834x_itx_defconfig
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v6] SATA: OCTEON: support SATA on OCTEON platform
  • From: Arnd Bergmann
• Re: [PATCH v6] SATA: OCTEON: support SATA on OCTEON platform
  • From: Zubair Lutfullah Kakakhel
• Re: [PATCH v6] SATA: OCTEON: support SATA on OCTEON platform
  • From: Zubair Lutfullah Kakakhel
• Re: [PATCH v6] SATA: OCTEON: support SATA on OCTEON platform
  • From: Arnd Bergmann
• Re: [PATCH v6] SATA: OCTEON: support SATA on OCTEON platform
  • From: Arnd Bergmann
• Re: [PATCH v6] SATA: OCTEON: support SATA on OCTEON platform
  • From: Zubair Lutfullah Kakakhel
• Re: [PATCH 03/10] arm64: add Armada 3700 architecture entry
  • From: Gregory CLEMENT
• Re: [PATCH 07/10] arm64: dts: add the Marvell Armada 3700 family and a development board
  • From: Gregory CLEMENT
• Re: [PATCH 03/10] arm64: add Armada 3700 architecture entry
  • From: Arnd Bergmann
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Marcin Wojtas
• Re: [PATCH 06/10] devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
  • From: Gregory CLEMENT
• Re: [PATCH 03/10] arm64: add Armada 3700 architecture entry
  • From: Gregory CLEMENT
• Re: [PATCH 07/10] arm64: dts: add the Marvell Armada 3700 family and a development board
  • From: Jisheng Zhang
• Re: [PATCH 03/10] arm64: add Armada 3700 architecture entry
  • From: Jisheng Zhang
• Re: [PATCH 05/10] Documentation: dt: Tidy up the Marvell related files
  • From: Rob Herring
• Re: [PATCH 06/10] devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
  • From: Rob Herring
• Re: [PATCH 04/10] Documentation: dt-bindings: Add a new compatible for the Armada 3700
  • From: Rob Herring
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Rob Herring
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Arnd Bergmann
• Re: [PATCH v6] SATA: OCTEON: support SATA on OCTEON platform
  • From: Arnd Bergmann
• Re: [PATCH v6] SATA: OCTEON: support SATA on OCTEON platform
  • From: David Daney
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• Re: [PATCH 07/10] arm64: dts: add the Marvell Armada 3700 family and a development board
  • From: Mark Rutland
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Mark Rutland
• [PATCH v6] SATA: OCTEON: support SATA on OCTEON platform
  • From: Zubair Lutfullah Kakakhel
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Mark Rutland
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: One Thousand Gnomes
• Re: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Mark Rutland
• [PATCH 02/10] ata: ahci_mvebu: add support for Armada 3700 variant
  • From: Gregory CLEMENT
• [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
  • From: Gregory CLEMENT
• [PATCH 04/10] Documentation: dt-bindings: Add a new compatible for the Armada 3700
  • From: Gregory CLEMENT
• [PATCH 03/10] arm64: add Armada 3700 architecture entry
  • From: Gregory CLEMENT
• [PATCH 06/10] devicetree: bindings: add DT binding for the Marvell Armada 3700 SoC family
  • From: Gregory CLEMENT
• [PATCH 05/10] Documentation: dt: Tidy up the Marvell related files
  • From: Gregory CLEMENT
• [PATCH 07/10] arm64: dts: add the Marvell Armada 3700 family and a development board
  • From: Gregory CLEMENT
• [PATCH 09/10] Documentation: arm: update supported Marvell EBU processors
  • From: Gregory CLEMENT
• [PATCH 08/10] MAINTAINERS: Extend dts entry for ARM64 mvebu files
  • From: Gregory CLEMENT
• [PATCH 10/10] arm64: defconfig: enable Armada 3700 related config
  • From: Gregory CLEMENT
• [PATCH 00/10] Add support for the Armada 3700 SoC an mvebu ARM64 based
  • From: Gregory CLEMENT
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Arnd Bergmann
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Arnd Bergmann
• Re: [PATCH v2 1/3] ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.
  • From: Suman Tripathi
• Re: [PATCH v2 2/3] libahci: Implement the capability to override the generic ahci interrupt handler.
  • From: Suman Tripathi
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• [PATCH libata/for-4.5-fixes] libata: fix sff host state machine locking while polling
  • From: Tejun Heo
• Re: ata: BUG in ata_sff_hsm_move
  • From: Dmitry Vyukov
• Re: [PATCH v2 2/3] libahci: Implement the capability to override the generic ahci interrupt handler.
  • From: Tejun Heo
• Re: [PATCH v2 1/3] ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.
  • From: Tejun Heo
• [LSF/MM ATTEND][LSF/MM TOPIC] SMR/Zoned devices IO
  • From: Adrian Palmer
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: One Thousand Gnomes
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Arnd Bergmann
• Re: ata: BUG in ata_sff_hsm_move
  • From: Tejun Heo
• Re: ata: BUG in ata_sff_hsm_move
  • From: Tejun Heo
• Re: ata: BUG in ata_sff_hsm_move
  • From: David Milburn
• Re: ata: BUG in ata_sff_hsm_move
  • From: Dmitry Vyukov
• Re: ata: BUG in ata_sff_hsm_move
  • From: Dmitry Vyukov
• Re: ata: BUG in ata_sff_hsm_move
  • From: Tejun Heo
• [PATCH libata/for-4.5-fixes] libata-sff: use WARN instead of BUG on illegal host state machine state
  • From: Tejun Heo
• Re: ata: BUG in ata_sff_hsm_move
  • From: Dmitry Vyukov
• Re: ata: BUG in ata_sff_hsm_move
  • From: Tejun Heo
• ata: BUG in ata_sff_hsm_move
  • From: Dmitry Vyukov
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Mark Brown
• [PATCH v2 0/3] ata: Fixes related to edge trigger latch for ahci_xgene driver.
  • From: Suman Tripathi
• [PATCH v2 3/3] ahci_xgene: Implement the workaround to fix the missing of edge interrupt for HOST_IRQ_STAT.
  • From: Suman Tripathi
• [PATCH v2 1/3] ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.
  • From: Suman Tripathi
• [PATCH v2 2/3] libahci: Implement the capability to override the generic ahci interrupt handler.
  • From: Suman Tripathi
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• Re: [PATCH] Let AHCI dirver skip Lenovo SWRAID controller
  • From: Christoph Hellwig
• Re: [PATCH] Let AHCI dirver skip Lenovo SWRAID controller
  • From: Ocean HY1 He
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Arnd Bergmann
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Hans de Goede
• [PATCH v3] libata: disable forced PORTS_IMPL for >= AHCI 1.3
  • From: Tejun Heo
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Tejun Heo
• Re: [PATCH -v2] drivers: libata-core : blacklist a Viking flash model for MWDMA corruption
  • From: Tejun Heo
• Re: [PATCH v2] drivers: ata: wake port before DMA stop for ALPM
  • From: Tejun Heo
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Andy Shevchenko
• Re: [PATCH] Let AHCI dirver skip Lenovo SWRAID controller
  • From: One Thousand Gnomes
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Mark Brown
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Mark Brown
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Vinod Koul
• Re: [PATCH] Let AHCI dirver skip Lenovo SWRAID controller
  • From: Christoph Hellwig
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Andy Shevchenko
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Viresh Kumar
• [PATCH] Let AHCI dirver skip Lenovo SWRAID controller
  • From: Ocean HY1 He
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Måns Rullgård
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Mark Brown
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Måns Rullgård
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Hans-Christian Noren Egtvedt
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Måns Rullgård
• Re: [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Hans-Christian Noren Egtvedt
• [PATCH 03/15] dmaengine: dw: rename masters to reflect actual topology
  • From: Mans Rullgard
• [PATCH 10/15] dmaengine: dw: pass platform data via struct dw_dma_chip
  • From: Mans Rullgard
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• [Bug 111151] [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• [Bug 111151] New: [pata_amd][pata_acpi] Internal base address register error prevents initialization of PATA drive
  • From: bugzilla-daemon
• Re: [PATCH v2] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH v2] drivers: ata: wake port before DMA stop for ALPM
  • From: Tejun Heo
• Re: [PATCH v2] libata: disable forced PORTS_IMPL for >= AHCI 1.3
  • From: Sergei Shtylyov
• Re: [PATCH v2] libata: disable forced PORTS_IMPL for >= AHCI 1.3
  • From: Tejun Heo
• Re: [PATCH v2] drivers: ata: wake port before DMA stop for ALPM
  • From: Danesh Petigara
• Re: [GIT] IDE
  • From: David Miller
• Re: [patch] ide: silence some underflow warnings
  • From: David Miller
• Re: [PATCH] ide: constify ide_dma_ops structures
  • From: David Miller
• Re: [PATCH] drivers/ide: make ide-scan-pci.c driver explicitly non-modular
  • From: David Miller
• Re: [PATCH v2] libata: disable forced PORTS_IMPL for >= AHCI 1.3
  • From: Sergei Shtylyov
• Re: [PATCH v2] libata: disable forced PORTS_IMPL for >= AHCI 1.3
  • From: Andy Lutomirski
• [PATCH v2] libata: disable forced PORTS_IMPL for >= AHCI 1.3
  • From: Tejun Heo
• Re: [PATCH] libata: disable forced PORTS_IMPL for >= v3.0 controllers
  • From: Tejun Heo
• Re: [PATCH] libata: disable forced PORTS_IMPL for >= v3.0 controllers
  • From: Andy Lutomirski
• [PATCH] libata: disable forced PORTS_IMPL for >= v3.0 controllers
  • From: Tejun Heo
• Re: Unhappy ahci controller on Dell XPS 13 9350
  • From: Tejun Heo
• Re: [PATCH v1 1/2] libahci: Implement the capability to override the generic ahci interrupt handler
  • From: Tejun Heo
• [PATCH v2] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• [PATCH v1 2/2] ahci_xgene: Implement the workaround to fix the missing of edge interrupt for HOST_IRQ_STAT
  • From: Suman Tripathi
• [PATCH v1 1/2] libahci: Implement the capability to override the generic ahci interrupt handler
  • From: Suman Tripathi
• [PATCH v1 0/2] ata: Fixes related to edge trigger latch for ahci_xgene driver.
  • From: Suman Tripathi
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Arnd Bergmann
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• Unhappy ahci controller on Dell XPS 13 9350
  • From: Andy Lutomirski
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Arnd Bergmann
• [PATCH -v2] drivers: libata-core : blacklist a Viking flash model for MWDMA corruption
  • From: Daniel Walker
• [PATCH] drivers: libata-core : blacklist a Viking flash model for MWDMA corruption
  • From: Daniel Walker
• [PATCH v2] drivers: ata: wake port before DMA stop for ALPM
  • From: Danesh Petigara
• [GIT PULL] libata changes for v4.5-rc1
  • From: Tejun Heo
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• Re: [PATCH 1/2] libahci: Implement the workaround to fix the missing of edge interrupt for HOST_IRQ_STAT
  • From: Tejun Heo
• Re: [PATCH 0/2] ata: Introduce the AHCI_HFLAG_EDGE_IRQ_BROKEN in libahci and enabling it for ahci_xgene driver.
  • From: Tejun Heo
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Mark Langsdorf
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Hans de Goede
• [PATCH 2/2] ahci_xgene: Enable AHCI_HFLAG_EDGE_IRQ_BROKEN for APM X-Gen2 SATA host controller
  • From: Suman Tripathi
• [PATCH 0/2] ata: Introduce the AHCI_HFLAG_EDGE_IRQ_BROKEN in libahci and enabling it for ahci_xgene driver.
  • From: Suman Tripathi
• [PATCH 1/2] libahci: Implement the workaround to fix the missing of edge interrupt for HOST_IRQ_STAT
  • From: Suman Tripathi
• Re: [PATCH 3/4] drivers: ata: wake port before DMA stop for ALPM
  • From: Tejun Heo
• Re: [PATCH 3/4] drivers: ata: wake port before DMA stop for ALPM
  • From: Danesh Petigara
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Arnd Bergmann
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• Re: [PATCH 1/2] drivers: pata_octeon_cf : Switch IO mode depending on model number
  • From: Daniel Walker
• Re: [PATCH 1/2] drivers: pata_octeon_cf : Switch IO mode depending on model number
  • From: Tejun Heo
• Re: [PATCH 1/2] drivers: pata_octeon_cf : Switch IO mode depending on model number
  • From: Daniel Walker
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Joe Perches
• Re: [PATCH 4/4] libata: skip debounce delay on link resume
  • From: Tejun Heo
• Re: [PATCH 3/4] drivers: ata: wake port before DMA stop for ALPM
  • From: Tejun Heo
• Re: [PATCH 2/4] ata: ahci_brcmstb: disable DIPM support
  • From: Tejun Heo
• Re: [PATCH 1/4] ata: ahci_brcmstb: enable support for ALPM
  • From: Tejun Heo
• Re: [PATCH 2/2] drivers: libata-core: Use usleep_range() instead of msleep() for short sleeps (<20 ms)
  • From: Tejun Heo
• Re: [PATCH 1/2] drivers: pata_octeon_cf : Switch IO mode depending on model number
  • From: Tejun Heo
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Arnd Bergmann
• [PATCH 2/2] drivers: libata-core: Use usleep_range() instead of msleep() for short sleeps (<20 ms)
  • From: Daniel Walker
• [PATCH 1/2] drivers: pata_octeon_cf : Switch IO mode depending on model number
  • From: Daniel Walker
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• [PATCH 1/4] ata: ahci_brcmstb: enable support for ALPM
  • From: Florian Fainelli
• [PATCH 2/4] ata: ahci_brcmstb: disable DIPM support
  • From: Florian Fainelli
• [PATCH 4/4] libata: skip debounce delay on link resume
  • From: Florian Fainelli
• [PATCH 3/4] drivers: ata: wake port before DMA stop for ALPM
  • From: Florian Fainelli
• [PATCH 0/4] ata: ahci_brcmstb: ALPM support
  • From: Florian Fainelli
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Arnd Bergmann
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Rob Herring
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• [PATCH] ata: add AMD Seattle platform driver
  • From: Brijesh Singh
• Re: [PATCH] ata: add AMD Seattle platform driver
  • From: Arnd Bergmann
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 0/2] ata: Introduce the AHCI_HFLAG_EDGE_IRQ_BROKEN in libahci and enabling it for ahci_xgene driver.
  • From: Suman Tripathi
• Re: [PATCH] ata: correctly handling failed allocation
  • From: Tejun Heo
• Re: [v6 0/7] add support SATA for BMIPS_GENERIC
  • From: Jaedon Shin
• Re: [v6 0/7] add support SATA for BMIPS_GENERIC
  • From: Tejun Heo
• [PATCH] ata: correctly handling failed allocation
  • From: Insu Yun
• Re: sata_mv: Another source code review around exception handling?
  • From: Tejun Heo
• Re: [v6 0/7] add support SATA for BMIPS_GENERIC
  • From: Tejun Heo
• Re: [PATCH 0/3] IDE-ACPI: Fine-tuning for a function
  • From: Julia Lawall
• Re: [PATCH 0/3] IDE-ACPI: Fine-tuning for a function
  • From: Joe Perches
• Re: [PATCH 0/3] IDE-ACPI: Fine-tuning for a function
  • From: David Miller
• [PATCH 3/3] IDE-ACPI: Move an assignment for one variable in ide_get_dev_handle()
  • From: SF Markus Elfring
• [PATCH 2/3] IDE-ACPI: Delete unnecessary null pointer checks in ide_get_dev_handle()
  • From: SF Markus Elfring
• [PATCH 1/3] IDE-ACPI: One function call less in ide_get_dev_handle() after error detection
  • From: SF Markus Elfring
• [PATCH 0/3] IDE-ACPI: Fine-tuning for a function
  • From: SF Markus Elfring
• sata_mv: Another source code review around exception handling?
  • From: SF Markus Elfring
• Re: [v6 0/7] add support SATA for BMIPS_GENERIC
  • From: Florian Fainelli
• [PATCH 1/2] libahci: Implement the workaround to fix the missing of edge interrupt for HOST_IRQ_STAT
  • From: Suman Tripathi
• [PATCH 2/2] ahci_xgene: Enable AHCI_HFLAG_EDGE_IRQ_BROKEN for APM X-Gen2 SATA host controller
  • From: Suman Tripathi
• [PATCH 0/2] ata: Introduce the AHCI_HFLAG_EDGE_IRQ_BROKEN in libahci and enabling it for ahci_xgene driver.
  • From: Suman Tripathi
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Jens Axboe
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Junichi Nomura
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Kent Overstreet
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Kent Overstreet
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Kent Overstreet
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Kent Overstreet
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Kent Overstreet
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Kent Overstreet
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Kent Overstreet
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Ming Lei
• Re: [PATCH] ata: sata_dwc_460ex: remove incorrect locking
  • From: Julian Margetson
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Tejun Heo
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH] ata: sata_dwc_460ex: remove incorrect locking
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Tejun Heo
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Tejun Heo
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• [PATCH] ata: sata_dwc_460ex: remove incorrect locking
  • From: Mans Rullgard
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Dan Aloni
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Tejun Heo
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Linus Torvalds
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Linus Torvalds
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Linus Torvalds
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Linus Torvalds
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Tejun Heo
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Ming Lei
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Kent Overstreet
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Ming Lei
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Ming Lei
• SATA IO errors after ''block: fix segment split"
  • From: Ming Lei
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Kent Overstreet
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Artem S. Tashkinov
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Kent Overstreet
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Linus Torvalds
• Re: IO errors after "block: remove bio_get_nr_vecs()"
  • From: Christoph Hellwig
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• IO errors after "block: remove bio_get_nr_vecs()"
  • From: Linus Torvalds
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [v6 0/7] add support SATA for BMIPS_GENERIC
  • From: Kishon Vijay Abraham I
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• sata with dma-debug enabled: DMA-API: cpu touching an active dma mapped cacheline [cln=0x00f270c0]
  • From: Russell King - ARM Linux
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Julian Margetson
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 3/3] ata: sata_dwc_460ex: get rid of global data
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 3/3] ata: sata_dwc_460ex: get rid of global data
  • From: Andy Shevchenko
• Re: [PATCH 3/3] ata: sata_dwc_460ex: get rid of global data
  • From: Måns Rullgård
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• Re: [PATCH 3/3] ata: sata_dwc_460ex: get rid of global data
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Andy Shevchenko
• Re: [v6 6/7] phy: phy_brcmstb_sata: add data for phy version
  • From: Florian Fainelli
• Re: [PATCH 2/2] ahci: qoriq: Update the default Rx watermark value
  • From: Tejun Heo
• Re: [PATCH] ahci: qoriq: Adjust the default register values on ls1021a
  • From: Tejun Heo
• Re: [PATCH 2/3] ata: sata_dwc_460ex: add phy support
  • From: Måns Rullgård
• Re: [PATCH 2/3] ata: sata_dwc_460ex: add phy support
  • From: Sergei Shtylyov
• [PATCH] ahci: qoriq: Adjust the default register values on ls1021a
  • From: Yuantian.Tang
• [PATCH 2/2] ahci: qoriq: Update the default Rx watermark value
  • From: Yuantian.Tang
• [PATCH 1/2] ahci: qoriq: Adjust the default register values on ls1043a
  • From: Yuantian.Tang
• Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Måns Rullgård
• [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
  • From: Mans Rullgard
• [PATCH 3/3] ata: sata_dwc_460ex: get rid of global data
  • From: Mans Rullgard
• [PATCH 2/3] ata: sata_dwc_460ex: add phy support
  • From: Mans Rullgard
• Re: [v6 6/7] phy: phy_brcmstb_sata: add data for phy version
  • From: Jaedon Shin
• Re: [v6 6/7] phy: phy_brcmstb_sata: add data for phy version
  • From: Kishon Vijay Abraham I
• pointer arithmetic on void *
  • From: Andy Falanga (afalanga)
• [PATCH] drivers/ide: make ide-scan-pci.c driver explicitly non-modular
  • From: Paul Gortmaker
• HBA isn't interpreting commands correctly
  • From: Andy Falanga (afalanga)
• RE: [PATCH] drivers: ata: Move vendor specific sata port phy oob settings to device-tree
  • From: Anurag Kumar Vulisha
• [GIT PULL] libata fixes for v4.4-rc4
  • From: Tejun Heo
• Re: [v2 0/2] ata/libata-eh.c: introduce ATA_FLAG_NO_LOG_PAGE
  • From: Andreas Werner
• Re: [v2 0/2] ata/libata-eh.c: introduce ATA_FLAG_NO_LOG_PAGE
  • From: Tejun Heo
• Re: [PATCH v2] ahci: compile out msi/msix infrastructure
  • From: Tejun Heo
• Re: [PATCH] ata: core: fix irq description on AHCI single irq systems
  • From: Tejun Heo
• Re: [PATCH] ata: core: fix irq description on AHCI single irq systems
  • From: Sergei Shtylyov
• Re: [PATCH v2] ahci: compile out msi/msix infrastructure
  • From: Peter Korsgaard
• [PATCH] ata: core: fix irq description on AHCI single irq systems
  • From: Heiner Kallweit
• [PATCH v2] ahci: compile out msi/msix infrastructure
  • From: Dan Williams
• Re: [PATCH] ahci: compile out msi/msix infrastructure
  • From: Dan Williams
• Re: [PATCH] ahci: compile out msi/msix infrastructure
  • From: Arnd Bergmann
• Re: [PATCH] ahci: compile out msi/msix infrastructure
  • From: Arnd Bergmann
• Re: [PATCH] ahci: compile out msi/msix infrastructure
  • From: Arnd Bergmann
• [PATCH] ahci: compile out msi/msix infrastructure
  • From: Dan Williams
• [v2 1/2] libata-eh.c: Introduce new ata port flag for controller which lockup on read log page
  • From: Andreas Werner
• [v2 2/2] ata/sata_fsl.c: add ATA_FLAG_NO_LOG_PAGE to blacklist the controller for log page reads
  • From: Andreas Werner
• [v2 0/2] ata/libata-eh.c: introduce ATA_FLAG_NO_LOG_PAGE
  • From: Andreas Werner
• Re: [PATCH] ahci: don't use MSI when PCI is disabled
  • From: Dan Williams
• Re: [PATCH] ahci: don't use MSI when PCI is disabled
  • From: Arnd Bergmann
• Re: [PATCH 1/2] libata-eh.c: Introduce new ata port flag for controller which lockup on read log page
  • From: kbuild test robot
• Re: [PATCH 1/2] libata-eh.c: Introduce new ata port flag for controller which lockup on read log page
  • From: kbuild test robot
• [PATCH 2/2] ata/sata_fsl.c: add ATA_FLAG_NO_LOG_PAGE to blacklist the controller for log page reads
  • From: Andreas Werner
• [PATCH 1/2] libata-eh.c: Introduce new ata port flag for controller which lockup on read log page
  • From: Andreas Werner
• [PATCH 0/2] libata: introduce ATA_FLAG_NO_LOG_PAGE
  • From: Andreas Werner
• requesting block devices via netlink
  • From: Marek
• Re: libata-core: devslp fails on ATP mSATA
  • From: Andreas Werner
• Re: libata-core: devslp fails on ATP mSATA
  • From: Tejun Heo
• Re: libata-core: devslp fails on ATP mSATA
  • From: Andreas Werner
• Re: libata-core: devslp fails on ATP mSATA
  • From: Tejun Heo
• Re: libata-core: devslp fails on ATP mSATA
  • From: Andreas Werner
• Re: libata-core: devslp fails on ATP mSATA
  • From: Tejun Heo
• Re: libata-core: devslp fails on ATP mSATA
  • From: Tejun Heo
• Re: [PATCH] sata_sil: disable trim
  • From: Tejun Heo
• Re: [PATCH 1/1] AHCI: Fix softreset failed issue of Port Multiplier
  • From: Tejun Heo
• Re: [v6 4/7] ata: ahci_brcmstb: remove unused definitions
  • From: Tejun Heo