[PATCH v2 22/23] ata: sata_dwc_460ex: make debug messages neat

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is a duplication in the debug messages when accessing SCR registers.
Remove duplication to make the messages neat.

Tested-by: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/ata/sata_dwc_460ex.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 6f145f8..00c2af1 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -414,16 +414,16 @@ static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
 	}
 
 	*val = sata_dwc_readl(link->ap->ioaddr.scr_addr + (scr * 4));
-	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
-		__func__, link->ap->print_id, scr, *val);
+	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
+		link->ap->print_id, scr, *val);
 
 	return 0;
 }
 
 static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
 {
-	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
-		__func__, link->ap->print_id, scr, val);
+	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
+		link->ap->print_id, scr, val);
 	if (scr > SCR_NOTIFICATION) {
 		dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
 			 __func__, scr);
-- 
2.8.0.rc3

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux