Linux IDE Archive

• Thread Index

• [LSF/MM/BPF TOPIC] Removing GFP_NOFS
  • From: Matthew Wilcox
• Re: [PATCH 1/1] libata: only wake a drive once on system resume
  • From: Phillip Susi
• Re: [PATCH 1/1] libata: only wake a drive once on system resume
  • From: Damien Le Moal
• Re: [PATCH 1/1] libata: only wake a drive once on system resume
  • From: Phillip Susi
• [GIT PULL] ata changes for 6.8-rc1
  • From: Damien Le Moal
• Re: [PATCH 1/1] libata: only wake a drive once on system resume
  • From: Damien Le Moal
• Re: [PATCH 0/1] Only activate drive once during system resume
  • From: Damien Le Moal
• Re: [PATCH 1/1] libata: only wake a drive once on system resume
  • From: Sergey Shtylyov
• [PATCH 1/1] libata: only wake a drive once on system resume
  • From: Phillip Susi
• [PATCH 0/1 v2] Only activate drive once during system resume
  • From: Phillip Susi
• Re: [PATCH v6 00/40] ep93xx device tree conversion
  • From: Andy Shevchenko
• [PATCH 1/1] libata: only wake a drive once on system resume
  • From: Phillip Susi
• [PATCH 0/1] Only activate drive once during system resume
  • From: Phillip Susi
• Re: [PATCH] MAINTAINERS: Add Niklas Cassel as libata maintainer
  • From: Niklas Cassel
• [PATCH] MAINTAINERS: Add Niklas Cassel as libata maintainer
  • From: Damien Le Moal
• Re: [PATCH v6 00/40] ep93xx device tree conversion
  • From: Nikita Shubin
• [linux-next:master] BUILD REGRESSION 39676dfe52331dba909c617f213fdb21015c8d10
  • From: kernel test robot
• LSF/MM/BPF: 2024: Call for Proposals
  • From: Daniel Borkmann
• Re: [Bug 218198] Suspend/Resume Regression with attached ATA devices
  • From: Niklas Cassel
• Re: [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use
  • From: Uwe Kleine-König
• Re: [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use
  • From: Andy Shevchenko
• Re: [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use
  • From: Uwe Kleine-König
• Re: [PATCH v6 22/40] ata: pata_ep93xx: add device tree support
  • From: Andy Shevchenko
• Re: [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use
  • From: Andy Shevchenko
• Re: [PATCH v6 00/40] ep93xx device tree conversion
  • From: Andy Shevchenko
• Re: [PATCH v6 00/40] ep93xx device tree conversion
  • From: Uwe Kleine-König
• [PATCH v6 36/40] ata: pata_ep93xx: remove legacy pinctrl use
  • From: Nikita Shubin via B4 Relay
• [PATCH v6 22/40] ata: pata_ep93xx: add device tree support
  • From: Nikita Shubin via B4 Relay
• [PATCH v6 21/40] dt-bindings: ata: Add Cirrus EP93xx
  • From: Nikita Shubin via B4 Relay
• [PATCH v6 00/40] ep93xx device tree conversion
  • From: Nikita Shubin via B4 Relay
• Re: [DO NOT MERGE v5 16/37] irqchip: Add SH7751 INTC driver
  • From: Thomas Gleixner
• Re: [DO NOT MERGE v5 23/37] mfd: sm501: Convert platform_data to OF property
  • From: Lee Jones
• Re: [DO NOT MERGE v5 11/37] pci: pci-sh7751: Add SH7751 PCI driver
  • From: Linus Walleij
• Re: [DO NOT MERGE v5 19/37] dt-bindings: interrupt-controller: renesas,sh7751-irl-ext: Add json-schema
  • From: Rob Herring
• Re: [DO NOT MERGE v5 09/37] dt-bindings: timer: renesas,tmu: add renesas,tmu-sh7750
  • From: Krzysztof Kozlowski
• Re: [DO NOT MERGE v5 17/37] dt-bindings: interrupt-controller: renesas,sh7751-intc: Add json-schema
  • From: Krzysztof Kozlowski
• Re: [DO NOT MERGE v5 04/37] dt-bindings: interrupt-controller: Add header for Renesas SH3/4 INTC.
  • From: Krzysztof Kozlowski
• Re: [DO NOT MERGE v5 22/37] dt-bindings: display: smi,sm501: SMI SM501 binding json-schema
  • From: Krzysztof Kozlowski
• Re: [DO NOT MERGE v5 20/37] serial: sh-sci: fix SH4 OF support.
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v5 09/37] dt-bindings: timer: renesas,tmu: add renesas,tmu-sh7750
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v5 24/37] dt-binding: sh: cpus: Add SH CPUs json-schema
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v5 17/37] dt-bindings: interrupt-controller: renesas,sh7751-intc: Add json-schema
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v5 21/37] dt-bindings: serial: renesas,scif: Add scif-sh7751.
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v5 12/37] dt-bindings: pci: pci-sh7751: Add SH7751 PCI
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v5 22/37] dt-bindings: display: smi,sm501: SMI SM501 binding json-schema
  • From: Arnd Bergmann
• Re: [DO NOT MERGE v5 22/37] dt-bindings: display: smi,sm501: SMI SM501 binding json-schema
  • From: Rob Herring
• Re: [DO NOT MERGE v5 11/37] pci: pci-sh7751: Add SH7751 PCI driver
  • From: Geert Uytterhoeven
• Re: [DO NOT MERGE v5 11/37] pci: pci-sh7751: Add SH7751 PCI driver
  • From: Arnd Bergmann
• Re: [DO NOT MERGE v5 06/37] sh: kernel/setup Update DT support.
  • From: Arnd Bergmann
• Re: [DO NOT MERGE v5 10/37] sh: Common PCI Framework driver support.
  • From: Arnd Bergmann
• Re: [DO NOT MERGE v5 35/37] sh: RTS7751R2D Plus OF defconfig
  • From: Arnd Bergmann
• Re: [DO NOT MERGE v5 14/37] clk: Compatible with narrow registers
  • From: Uwe Kleine-König
• Re: [DO NOT MERGE v5 17/37] dt-bindings: interrupt-controller: renesas,sh7751-intc: Add json-schema
  • From: Linus Walleij
• [DO NOT MERGE v5 00/37] Device Tree support for SH7751 based board
  • From: Yoshinori Sato
• [DO NOT MERGE v5 09/37] dt-bindings: timer: renesas,tmu: add renesas,tmu-sh7750
  • From: Yoshinori Sato
• [DO NOT MERGE v5 16/37] irqchip: Add SH7751 INTC driver
  • From: Yoshinori Sato
• [DO NOT MERGE v5 15/37] clk: renesas: Add SH7750/7751 CPG Driver
  • From: Yoshinori Sato
• [DO NOT MERGE v5 03/37] sh: Enable OF support for build and configuration.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 18/37] irqchip: SH7751 IRL external encoder with enable gate.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 10/37] sh: Common PCI Framework driver support.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 22/37] dt-bindings: display: smi,sm501: SMI SM501 binding json-schema
  • From: Yoshinori Sato
• [DO NOT MERGE v5 14/37] clk: Compatible with narrow registers
  • From: Yoshinori Sato
• [DO NOT MERGE v5 19/37] dt-bindings: interrupt-controller: renesas,sh7751-irl-ext: Add json-schema
  • From: Yoshinori Sato
• [DO NOT MERGE v5 11/37] pci: pci-sh7751: Add SH7751 PCI driver
  • From: Yoshinori Sato
• [DO NOT MERGE v5 08/37] clocksource: sh_tmu: CLOCKSOURCE support.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 27/37] dt-bindings: ata: ata-generic: Add new targets
  • From: Yoshinori Sato
• [DO NOT MERGE v5 02/37] sh: Kconfig unified OF supported targets.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 01/37] sh: passing FDT address to kernel startup.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 17/37] dt-bindings: interrupt-controller: renesas,sh7751-intc: Add json-schema
  • From: Yoshinori Sato
• [DO NOT MERGE v5 12/37] dt-bindings: pci: pci-sh7751: Add SH7751 PCI
  • From: Yoshinori Sato
• [DO NOT MERGE v5 13/37] dt-bindings: clock: sh7750-cpg: Add renesas,sh7750-cpg header.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 21/37] dt-bindings: serial: renesas,scif: Add scif-sh7751.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 26/37] dt-bindings: vendor-prefixes: Add smi
  • From: Yoshinori Sato
• [DO NOT MERGE v5 20/37] serial: sh-sci: fix SH4 OF support.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 25/37] dt-bindings: vendor-prefixes: Add iodata
  • From: Yoshinori Sato
• [DO NOT MERGE v5 28/37] dt-bindings: soc: renesas: sh: Add SH7751 based target
  • From: Yoshinori Sato
• [DO NOT MERGE v5 29/37] sh: SH7751R SoC Internal peripheral definition dtsi.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 04/37] dt-bindings: interrupt-controller: Add header for Renesas SH3/4 INTC.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 05/37] sh: GENERIC_IRQ_CHIP support for CONFIG_OF=y
  • From: Yoshinori Sato
• [DO NOT MERGE v5 07/37] sh: Fix COMMON_CLK support in CONFIG_OF=y.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 06/37] sh: kernel/setup Update DT support.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 23/37] mfd: sm501: Convert platform_data to OF property
  • From: Yoshinori Sato
• [DO NOT MERGE v5 24/37] dt-binding: sh: cpus: Add SH CPUs json-schema
  • From: Yoshinori Sato
• [DO NOT MERGE v5 37/37] sh: j2_defconfig: update
  • From: Yoshinori Sato
• [DO NOT MERGE v5 36/37] sh: LANDISK OF defconfig
  • From: Yoshinori Sato
• [DO NOT MERGE v5 35/37] sh: RTS7751R2D Plus OF defconfig
  • From: Yoshinori Sato
• [DO NOT MERGE v5 34/37] sh: Add dtbs target support.
  • From: Yoshinori Sato
• [DO NOT MERGE v5 33/37] sh: j2_mimas_v2.dts update
  • From: Yoshinori Sato
• [DO NOT MERGE v5 32/37] sh: Add IO DATA USL-5P dts
  • From: Yoshinori Sato
• [DO NOT MERGE v5 31/37] sh: Add IO DATA LANDISK dts
  • From: Yoshinori Sato
• [DO NOT MERGE v5 30/37] sh: add RTS7751R2D Plus DTS
  • From: Yoshinori Sato
• Re: [Bug 218198] Suspend/Resume Regression with attached ATA devices
  • From: Niklas Cassel
• Re: [Bug 218198] Suspend/Resume Regression with attached ATA devices
  • From: Phillip Susi
• Re: [Bug 218198] Suspend/Resume Regression with attached ATA devices
  • From: Niklas Cassel
• Re: [PATCH v2 0/2] Fix runtime suspended device resume
  • From: Martin K. Petersen
• Re: [GIT PULL] ata fixes for 6.7-rc3
  • From: pr-tracker-bot
• [GIT PULL] ata fixes for 6.7-rc3
  • From: Damien Le Moal
• Re: [PATCH v5 35/39] ata: pata_ep93xx: remove legacy pinctrl use
  • From: Andy Shevchenko
• Re: [PATCH v5 21/39] ata: pata_ep93xx: add device tree support
  • From: Andy Shevchenko
• Re: [PATCH v5 20/39] dt-bindings: ata: Add Cirrus EP93xx
  • From: Rob Herring
• Re: [PATCH v5 00/39] ep93xx device tree conversion
  • From: Andy Shevchenko
• [PATCH v5 35/39] ata: pata_ep93xx: remove legacy pinctrl use
  • From: Nikita Shubin via B4 Relay
• [PATCH v5 20/39] dt-bindings: ata: Add Cirrus EP93xx
  • From: Nikita Shubin via B4 Relay
• [PATCH v5 21/39] ata: pata_ep93xx: add device tree support
  • From: Nikita Shubin via B4 Relay
• [PATCH v5 00/39] ep93xx device tree conversion
  • From: Nikita Shubin via B4 Relay
• Re: [PATCH v2 1/2] scsi: Change scsi device boolean fields to single bit flags
  • From: Niklas Cassel
• [PATCH v2 2/2] scsi: sd: fix system start for ATA devices
  • From: Damien Le Moal
• [PATCH v2 1/2] scsi: Change scsi device boolean fields to single bit flags
  • From: Damien Le Moal
• [PATCH v2 0/2] Fix runtime suspended device resume
  • From: Damien Le Moal
• Re: [PATCH 1/2] scsi: Change scsi device boolean fields to single bit flags
  • From: Damien Le Moal
• Re: [PATCH 1/2] scsi: Change scsi device boolean fields to single bit flags
  • From: Bart Van Assche
• Re: [PATCH 2/2] scsi: sd: fix system start for ATA devices
  • From: Niklas Cassel
• Re: [PATCH 2/2] scsi: sd: fix system start for ATA devices
  • From: Damien Le Moal
• Re: [PATCH 2/2] scsi: sd: fix system start for ATA devices
  • From: Sergey Shtylyov
• [PATCH 2/2] scsi: sd: fix system start for ATA devices
  • From: Damien Le Moal
• [PATCH 1/2] scsi: Change scsi device boolean fields to single bit flags
  • From: Damien Le Moal
• [PATCH 0/2] Fix runtime suspended device resume
  • From: Damien Le Moal
• Re: [PATCH v2] ata: pata_pxa: convert not to use dma_request_slave_channel()
  • From: Damien Le Moal
• Re: [PATCH v2] ata: pata_pxa: convert not to use dma_request_slave_channel()
  • From: Sergey Shtylyov
• [PATCH v2] ata: pata_pxa: convert not to use dma_request_slave_channel()
  • From: Christophe JAILLET
• Re: [PATCH] ata: pata_pxa: convert not to use dma_request_slave_channel()
  • From: Christophe JAILLET
• Re: [PATCH v3 14/42] power: reset: Add a driver for the ep93xx reset
  • From: Andy Shevchenko
• Re: [PATCH v3 07/42] soc: Add SoC driver for Cirrus ep93xx
  • From: Andy Shevchenko
• Re: [PATCH] ata: pata_pxa: convert not to use dma_request_slave_channel()
  • From: Sergey Shtylyov
• Re: [PATCH v3 14/42] power: reset: Add a driver for the ep93xx reset
  • From: Alexander Sverdlin
• Re: [PATCH v3 14/42] power: reset: Add a driver for the ep93xx reset
  • From: Alexander Sverdlin
• Re: [PATCH v3 14/42] power: reset: Add a driver for the ep93xx reset
  • From: Andy Shevchenko
• Re: [PATCH] ata: pata_pxa: convert not to use dma_request_slave_channel()
  • From: Niklas Cassel
• [PATCH] ata: pata_pxa: convert not to use dma_request_slave_channel()
  • From: Christophe JAILLET
• Re: [PATCH v3 07/42] soc: Add SoC driver for Cirrus ep93xx
  • From: Alexander Sverdlin
• Re: [PATCH v3 14/42] power: reset: Add a driver for the ep93xx reset
  • From: Alexander Sverdlin
• Re: PSA: This list is being migrated (no action required)
  • From: Konstantin Ryabitsev
• Re: [GIT PULL] ata fixes for 6.7-rc1-2
  • From: pr-tracker-bot
• PSA: This list is being migrated (no action required)
  • From: Konstantin Ryabitsev
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH] pata_isapnp: Add check for devm_ioport_map
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [GIT PULL] ata fixes for 6.7-rc1-2
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH] ata: libata-core: Fix ata_pci_shutdown_one()
  • From: Damien Le Moal
• Re: [PATCH 0/4] ata: Drop platform_driver_probe() and convert to platform remove callback returning void (part II)
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH 0/4] ata: Drop platform_driver_probe() and convert to platform remove callback returning void (part II)
  • From: Niklas Cassel
• Re: [PATCH] ata: libata-core: Fix ata_pci_shutdown_one()
  • From: Niklas Cassel
• PSA: migrating linux-ide to new vger infrastructure
  • From: Konstantin Ryabitsev
• [PATCH 5.4 64/74] ata: ahci: fix enum constants for gcc-13
  • From: Greg Kroah-Hartman
• [PATCH 4.19 54/61] ata: ahci: fix enum constants for gcc-13
  • From: Greg Kroah-Hartman
• [PATCH 4.14 40/48] ata: ahci: fix enum constants for gcc-13
  • From: Greg Kroah-Hartman
• Re: [PATCH 4/4] ata: pata_gayle: Convert to platform remove callback returning void
  • From: Sergey Shtylyov
• Re: [PATCH 3/4] ata: pata_falcon: Convert to platform remove callback returning void
  • From: Sergey Shtylyov
• Re: [PATCH 2/4] ata: pata_gayle: Stop using module_platform_driver_probe()
  • From: Sergey Shtylyov
• Re: [PATCH 1/4] ata: pata_falcon: Stop using module_platform_driver_probe()
  • From: Sergey Shtylyov
• Re: [PATCH 4.14] ata: ahci: fix enum constants for gcc-13
  • From: Greg KH
• Re: [PATCH] ata: libata-core: Fix ata_pci_shutdown_one()
  • From: Damien Le Moal
• Re: [PATCH] ata: libata-core: Fix ata_pci_shutdown_one()
  • From: Sergey Shtylyov
• [PATCH] ata: libata-core: Fix ata_pci_shutdown_one()
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH 2/4] ata: pata_gayle: Stop using module_platform_driver_probe()
  • From: Uwe Kleine-König
• [PATCH 4/4] ata: pata_gayle: Convert to platform remove callback returning void
  • From: Uwe Kleine-König
• [PATCH 3/4] ata: pata_falcon: Convert to platform remove callback returning void
  • From: Uwe Kleine-König
• [PATCH 1/4] ata: pata_falcon: Stop using module_platform_driver_probe()
  • From: Uwe Kleine-König
• [PATCH 0/4] ata: Drop platform_driver_probe() and convert to platform remove callback returning void (part II)
  • From: Uwe Kleine-König
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [GIT PULL] ata changes for 6.7-rc1
  • From: pr-tracker-bot
• Re: [PATCH 4.14] ata: ahci: fix enum constants for gcc-13
  • From: Paul Barker
• Re: [PATCH 4.14] ata: ahci: fix enum constants for gcc-13
  • From: Greg KH
• [PATCH 5.4] ata: ahci: fix enum constants for gcc-13
  • From: Paul Barker
• [PATCH 4.19] ata: ahci: fix enum constants for gcc-13
  • From: Paul Barker
• [PATCH 4.14] ata: ahci: fix enum constants for gcc-13
  • From: Paul Barker
• Re: [PATCH] pata_isapnp: Add check for devm_ioport_map
  • From: Sergey Shtylyov
• Re: [PATCH] pata_isapnp: Add check for devm_ioport_map
  • From: Damien Le Moal
• Re: [PATCH] pata_isapnp: Add check for devm_ioport_map
  • From: Damien Le Moal
• [PATCH] pata_isapnp: Add check for devm_ioport_map
  • From: Chen Ni
• [GIT PULL] ata changes for 6.7-rc1
  • From: Damien Le Moal
• Re: [GIT PULL] ata fixes for 6.6-final
  • From: Damien Le Moal
• Re: [GIT PULL] ata fixes for 6.6-final
  • From: pr-tracker-bot
• Re: [GIT PULL] ata fixes for 6.6-final
  • From: Linus Torvalds
• Re: Fwd: bbbf096ea227607cbb348155eeda7af71af1a35b results in "dirty" shutdown
  • From: Linux regression tracking (Thorsten Leemhuis)
• Re: Fwd: bbbf096ea227607cbb348155eeda7af71af1a35b results in "dirty" shutdown
  • From: Damien Le Moal
• [GIT PULL] ata fixes for 6.6-final
  • From: Damien Le Moal
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: Martin K. Petersen
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: James Bottomley
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: Bart Van Assche
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: James Bottomley
• Re: [PATCH v3] scsi: sd: Introduce manage_shutdown device flag
  • From: Hannes Reinecke
• [PATCH v3] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal
• Re: [PATCH v2] scsi: sd: Introduce manage_shutdown device flag
  • From: Niklas Cassel
• Re: [PATCH v2] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal
• [PATCH v2] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: James Bottomley
• Re: [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal
• [PATCH] scsi: sd: Introduce manage_shutdown device flag
  • From: Damien Le Moal
• Re: Fwd: bbbf096ea227607cbb348155eeda7af71af1a35b results in "dirty" shutdown
  • From: Damien Le Moal
• Fwd: bbbf096ea227607cbb348155eeda7af71af1a35b results in "dirty" shutdown
  • From: Bagas Sanjaya
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH] pata_lagacy: Handle failed ATA timing computation in opti82c46x_set_piomode
  • From: Haonan Li
• Re: [PATCH] pata_lagacy: Handle failed ATA timing computation in opti82c46x_set_piomode
  • From: Sergey Shtylyov
• [PATCH AUTOSEL 6.5 25/31] ata: pata_parport: fit3: implement IDE command set registers
  • From: Sasha Levin
• [PATCH AUTOSEL 6.5 24/31] ata: pata_parport: add custom version of wait_after_reset
  • From: Sasha Levin
• Re: [PATCH] pata_lagacy: Handle failed ATA timing computation in opti82c46x_set_piomode
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH] pata_lagacy: Handle failed ATA timing computation in opti82c46x_set_piomode
  • From: Haonan Li
• Re: [PATCH] pata_lagacy: Handle failed ATA timing computation in opti82c46x_set_piomode
  • From: kernel test robot
• Re: [PATCH] pata_lagacy: Handle failed ATA timing computation in opti82c46x_set_piomode
  • From: Damien Le Moal
• [PATCH] pata_lagacy: Handle failed ATA timing computation in opti82c46x_set_piomode
  • From: Haonan Li
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH] dt-bindings: ata: tegra: Disallow undefined properties
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH] dt-bindings: ata: tegra: Disallow undefined properties
  • From: Conor Dooley
• [PATCH] dt-bindings: ata: tegra: Disallow undefined properties
  • From: Rob Herring
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [RFC PATCH v3 28/35] Documentation/devicetree/bindings/ata: ata-generic.yaml add usl-5p and rts7751r2d.
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: libata-core: Improve ata_dev_power_set_active()
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: (subset) [PATCH v4 00/42] ep93xx device tree conversion
  • From: Alexandre Belloni
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• [RFC PATCH v3 28/35] Documentation/devicetree/bindings/ata: ata-generic.yaml add usl-5p and rts7751r2d.
  • From: Yoshinori Sato
• Re: [PATCH 2/2] ata: libata-core: Improve ata_dev_power_set_active()
  • From: Niklas Cassel
• Re: [PATCH 2/2] ata: libata-core: Improve ata_dev_power_set_active()
  • From: Phillip Susi
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH 2/2] ata: libata-core: Improve ata_dev_power_set_active()
  • From: Niklas Cassel
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• Re: [PATCH 0/2] Improve drive spinup on resume
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] ata: libata-core: Improve ata_dev_power_set_active()
  • From: Niklas Cassel
• Re: [PATCH 1/2] ata: libata-eh: Spinup disk on resume after revalidation
  • From: Niklas Cassel
• [PATCH 0/2] Improve drive spinup on resume
  • From: Damien Le Moal
• [PATCH 1/2] ata: libata-eh: Spinup disk on resume after revalidation
  • From: Damien Le Moal
• [PATCH 2/2] ata: libata-core: Improve ata_dev_power_set_active()
  • From: Damien Le Moal
• Re: [GIT PULL] ata fixes for 6.6-rc6
  • From: pr-tracker-bot
• Re: [PATCH] ata: imx: Use device_get_match_data()
  • From: Damien Le Moal
• Re: [PATCH] ata: xgene: Use of_device_get_match_data()
  • From: Damien Le Moal
• Re: [PATCH v3] ata: sata_mv: aspeed: fix value check in mv_platform_probe()
  • From: Damien Le Moal
• [GIT PULL] ata fixes for 6.6-rc6
  • From: Damien Le Moal
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v3] ata: sata_mv: aspeed: fix value check in mv_platform_probe()
  • From: Niklas Cassel
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Phillip Susi
• [PATCH v3] ata: sata_mv: aspeed: fix value check in mv_platform_probe()
  • From: Ma Ke
• Re: [PATCH v2] ata: sata_mv: aspeed: fix value check in mv_platform_probe()
  • From: Niklas Cassel
• Re: [PATCH] scsi: Do not rescan devices with a suspended queue
  • From: Damien Le Moal
• Re: [PATCH] scsi: Do not rescan devices with a suspended queue
  • From: Martin K. Petersen
• Re: [PATCH] scsi: Do not rescan devices with a suspended queue
  • From: Damien Le Moal
• Re: [PATCH v2] ata: sata_mv: aspeed: fix value check in mv_platform_probe()
  • From: Damien Le Moal
• Re: [PATCH] ata: xgene: Use of_device_get_match_data()
  • From: Niklas Cassel
• Re: [PATCH] ata: xgene: Use of_device_get_match_data()
  • From: Rob Herring
• Re: [PATCH] ata: xgene: Use of_device_get_match_data()
  • From: Niklas Cassel
• Re: [PATCH] ata: imx: Use device_get_match_data()
  • From: Niklas Cassel
• Re: [PATCH v2] ata: sata_mv: aspeed: fix value check in mv_platform_probe()
  • From: Niklas Cassel
• [PATCH v2] ata: sata_mv: aspeed: fix value check in mv_platform_probe()
  • From: Ma Ke
• Re: [PATCH] ata: sata_mv: aspeed: fix value check in mv_platform_probe()
  • From: Niklas Cassel
• Re: [PATCH] scsi: Do not rescan devices with a suspended queue
  • From: Petr Tesařík
• [PATCH AUTOSEL 5.4 7/8] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 6/7] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.1 10/12] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 7/8] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 09/10] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 7/8] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 08/10] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.5 16/18] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.5 17/18] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.1 11/12] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Sasha Levin
• [PATCH] ata: sata_mv: aspeed: fix value check in mv_platform_probe()
  • From: Ma Ke
• [PATCH] ata: imx: Use device_get_match_data()
  • From: Rob Herring
• [PATCH] ata: xgene: Use of_device_get_match_data()
  • From: Rob Herring
• Re: [PATCH v4 0/4] ata: pata_parport: fix EXP Computer CD-865 with MC-1285B EPP cable
  • From: Damien Le Moal
• [PATCH 3/4] ata: pata_parport: add custom version of wait_after_reset
  • From: Ondrej Zary
• [PATCH 4/4] ata: pata_parport: fit3: implement IDE command set registers
  • From: Ondrej Zary
• [PATCH 2/4] ata: pata_parport: implement set_devctl
  • From: Ondrej Zary
• [PATCH v4 0/4] ata: pata_parport: fix EXP Computer CD-865 with MC-1285B EPP cable
  • From: Ondrej Zary
• [PATCH 1/4] ata: pata_parport: fix pata_parport_devchk
  • From: Ondrej Zary
• Re: [PATCH 4/4] ata: pata_parport: fit3: implement IDE command set registers
  • From: Ondrej Zary
• Re: [PATCH 3/4] ata: pata_parport: add custom version of wait_after_reset
  • From: Sergey Shtylyov
• Re: [PATCH 4/4] ata: pata_parport: fit3: implement IDE command set registers
  • From: Sergey Shtylyov
• Re: [PATCH 1/4] ata: pata_parport: fix pata_parport_devchk
  • From: Sergey Shtylyov
• Re: [PATCH 1/4] ata: pata_parport: fix pata_parport_devchk
  • From: Sergei Shtylyov
• [PATCH v3 0/4] ata: pata_parport: fix EXP Computer CD-865 with MC-1285B EPP cable
  • From: Ondrej Zary
• [PATCH 4/4] ata: pata_parport: fit3: implement IDE command set registers
  • From: Ondrej Zary
• [PATCH 3/4] ata: pata_parport: add custom version of wait_after_reset
  • From: Ondrej Zary
• [PATCH 2/4] ata: pata_parport: implement set_devctl
  • From: Ondrej Zary
• [PATCH 1/4] ata: pata_parport: fix pata_parport_devchk
  • From: Ondrej Zary
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Phillip Susi
• Re: [PATCH 2/4] ata: pata_parport: implement set_devctl
  • From: Damien Le Moal
• Re: [PATCH 4/4] ata: pata_parport: fit3: implement IDE command set registers
  • From: Damien Le Moal
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Phillip Susi
• [PATCH 3/4] ata: pata_parport: add custom version of wait_after_reset
  • From: Ondrej Zary
• [PATCH v2 0/4] ata: pata_parport: fix EXP Computer CD-865 with MC-1285B EPP cable
  • From: Ondrej Zary
• [PATCH 2/4] ata: pata_parport: implement set_devctl
  • From: Ondrej Zary
• [PATCH 1/4] ata: pata_parport: fix pata_parport_devchk
  • From: Ondrej Zary
• [PATCH 4/4] ata: pata_parport: fit3: implement IDE command set registers
  • From: Ondrej Zary
• [PATCH] scsi: Do not rescan devices with a suspended queue
  • From: Damien Le Moal
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Damien Le Moal
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Petr Tesařík
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Petr Tesařík
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Damien Le Moal
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Hannes Reinecke
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Damien Le Moal
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH 3/4] pata_parport: add custom version of wait_after_reset
  • From: Damien Le Moal
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Phillip Susi
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Petr Tesařík
• Re: [PATCH 3/4] pata_parport: add custom version of wait_after_reset
  • From: Ondrej Zary
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Petr Tesařík
• Re: [PATCH 1/4] pata_parport: fix pata_parport_devchk
  • From: Sergei Shtylyov
• Re: [PATCH 4/4] pata_parport-fit3: implement IDE command set registers
  • From: Ondrej Zary
• Re: [PATCH 1/4] pata_parport: fix pata_parport_devchk
  • From: Ondrej Zary
• Re: [PATCH 3/4] pata_parport: add custom version of wait_after_reset
  • From: Sergey Shtylyov
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Rafael J. Wysocki
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Petr Tesařík
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Petr Tesařík
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Mika Westerberg
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Damien Le Moal
• Re: [PATCH 4/4] pata_parport-fit3: implement IDE command set registers
  • From: Damien Le Moal
• Re: [PATCH 3/4] pata_parport: add custom version of wait_after_reset
  • From: Damien Le Moal
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Damien Le Moal
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH 0/4] pata_parport: fix EXP Computer CD-865 with MC-1285B EPP cable
  • From: Damien Le Moal
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Phillip Susi
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Phillip Susi
• Re: [PATCH 3/4] pata_parport: add custom version of wait_after_reset
  • From: Sergey Shtylyov
• Re: [PATCH 4/4] pata_parport-fit3: implement IDE command set registers
  • From: Sergey Shtylyov
• Re: [PATCH 2/4] pata_parport: implement set_devctl
  • From: Sergey Shtylyov
• Re: [PATCH 1/4] pata_parport: fix pata_parport_devchk
  • From: Sergey Shtylyov
• Re: [PATCH 1/4] pata_parport: fix pata_parport_devchk
  • From: Sergey Shtylyov
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Mika Westerberg
• [PATCH 4/4] pata_parport-fit3: implement IDE command set registers
  • From: Ondrej Zary
• [PATCH 0/4] pata_parport: fix EXP Computer CD-865 with MC-1285B EPP cable
  • From: Ondrej Zary
• [PATCH 1/4] pata_parport: fix pata_parport_devchk
  • From: Ondrej Zary
• [PATCH 2/4] pata_parport: implement set_devctl
  • From: Ondrej Zary
• [PATCH 3/4] pata_parport: add custom version of wait_after_reset
  • From: Ondrej Zary
• Re: [GIT PULL] ata fixes for 6.6-rc4
  • From: pr-tracker-bot
• Re: [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Geert Uytterhoeven
• Re: [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• [GIT PULL] ata fixes for 6.6-rc4
  • From: Damien Le Moal
• Re: [PATCH AUTOSEL 4.14 6/6] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Niklas Cassel
• Re: [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Geert Uytterhoeven
• Re: [PATCH v8 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Martin K. Petersen
• Re: [PATCH v8 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Martin K. Petersen
• Re: [PATCH v8 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Martin K. Petersen
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Martin K. Petersen
• Re: [PATCH v7 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• Re: [PATCH v7 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• Re: [PATCH v7 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• [PATCH v8 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v8 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v8 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v8 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v8 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v8 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v8 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v8 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v8 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH v8 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v8 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v8 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH v8 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v8 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v8 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v8 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v8 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH v8 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v8 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v8 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v8 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v8 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v7 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Hannes Reinecke
• Re: [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• Re: [PATCH v6 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Bart Van Assche
• Re: [PATCH v6 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Bart Van Assche
• Re: [PATCH v6 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Bart Van Assche
• Re: [PATCH v6 02/23] ata: libata-core: Fix port and device removal
  • From: Bart Van Assche
• Re: [PATCH v6 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Bart Van Assche
• Re: [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Phillip Susi
• Re: [PATCH v6 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Phillip Susi
• Re: [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• [PATCH v7 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v7 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v7 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v7 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v7 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH v7 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v7 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v7 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v7 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH v7 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH v7 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v7 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v7 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v7 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v7 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v7 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• [PATCH v7 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v7 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v7 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v7 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v7 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v7 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v7 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• Re: [PATCH v6 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• Re: [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• Re: [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Koba Ko
• Re: [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• Re: [PATCH v6 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Phillip Susi
• Re: [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Phillip Susi
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Damien Le Moal
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Mika Westerberg
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Damien Le Moal
• [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Mika Westerberg
• Re: [PATCH] ata: libata: increase PMP SRST timeout to 10s
  • From: Damien Le Moal
• Re: [PATCH] libata: Annotate struct ata_cpr_log with __counted_by
  • From: Damien Le Moal
• Re: [PATCH] ahci: add identifiers for ASM2116 series devices.
  • From: Damien Le Moal
• [PATCH AUTOSEL 6.1 28/28] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 13/13] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 7/7] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.1 16/28] ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 18/18] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 7/7] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 6/6] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.5 40/41] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.5 41/41] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.5 19/41] ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  • From: Sasha Levin
• Re: [PATCH] libata: Annotate struct ata_cpr_log with __counted_by
  • From: Gustavo A. R. Silva
• [PATCH v6 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v6 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v6 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v6 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v6 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v6 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v6 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v6 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v6 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH v6 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v6 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v6 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH v6 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v6 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v6 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v6 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH v6 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v6 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v6 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v6 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v6 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v6 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• [PATCH] ata: libata: increase PMP SRST timeout to 10s
  • From: Matthias Schiffer
• Re: [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• Re: [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• Re: [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Damien Le Moal
• Re: [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Matthias Schiffer
• Re: [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• Re: [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Damien Le Moal
• Re: [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Matthias Schiffer
• Re: [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• [PATCH] libata: Annotate struct ata_cpr_log with __counted_by
  • From: Kees Cook
• Re: [PATCH v4 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Damien Le Moal
• [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Matthias Schiffer
• Re: [PATCH v5 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Sergey Shtylyov
• Re: [PATCH v5 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v5 03/23] ata: libata-scsi: link ata port and scsi device
  • From: John Garry
• Re: [PATCH v5 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Martin K. Petersen
• Re: [PATCH v5 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Martin K. Petersen
• Re: [PATCH v4 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v5 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v5 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• Re: [PATCH v4 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Bart Van Assche
• Re: [PATCH v4 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• [PATCH v5 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v5 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v5 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v5 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v5 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v5 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH v5 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• [PATCH v5 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v5 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v5 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v5 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v5 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v5 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v5 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v5 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• Re: [PATCH v4 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v5 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v5 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• Re: [PATCH v4 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v4 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Geert Uytterhoeven
• Re: [PATCH v4 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v4 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v5 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v5 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v5 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v5 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH] ahci: add identifiers for ASM2116 series devices.
  • From: Szuying Chen
• Re: [PATCH v4 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: John Garry
• Re: [PATCH v4 03/23] ata: libata-scsi: link ata port and scsi device
  • From: John Garry
• Re: [PATCH v4 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Sergey Shtylyov
• Re: [PATCH v4 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Geert Uytterhoeven
• Re: [PATCH v4 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Niklas Cassel
• Re: [PATCH v4 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Niklas Cassel
• [PATCH v4 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v4 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v4 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v4 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v4 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v4 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v4 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH v4 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v4 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v4 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH v4 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v4 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v4 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v4 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v4 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• [PATCH v4 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v4 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v4 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v4 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v4 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• [PATCH v4 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v4 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v4 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v4 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Niklas Cassel
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Niklas Cassel
• Re: [PATCH v3 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• Re: [PATCH] ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
  • From: Damien Le Moal
• Re: [PATCH] dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
  • From: Damien Le Moal
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• Re: [PATCH v3 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• Re: [PATCH v3 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Niklas Cassel
• Re: [PATCH v3 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Niklas Cassel
• Re: [PATCH v3 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Niklas Cassel
• Re: [PATCH v3 02/23] ata: libata-core: Fix port and device removal
  • From: Niklas Cassel
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Niklas Cassel
• Re: Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Bagas Sanjaya
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Linux regression tracking #update (Thorsten Leemhuis)
• Re: Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Linux regression tracking #update (Thorsten Leemhuis)
• Re: Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Bagas Sanjaya
• Re: [PATCH] ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
  • From: Niklas Cassel
• [PATCH] ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
  • From: Niklas Cassel
• Re: Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Bagas Sanjaya
• Re: [PATCH v4 00/42] ep93xx device tree conversion
  • From: Andy Shevchenko
• Re: Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Niklas Cassel
• Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Bagas Sanjaya
• Re: [GIT PULL] ata fixes for 6.6-rc2
  • From: pr-tracker-bot
• [GIT PULL] ata fixes for 6.6-rc2
  • From: Damien Le Moal
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: David Gow
• Re: [PATCH] dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
  • From: Conor Dooley
• [PATCH] dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
  • From: Rob Herring
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Niklas Cassel
• Re: [PATCH v3 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• Re: [PATCH v3 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Hannes Reinecke
• Re: [PATCH v3 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Hannes Reinecke
• Re: [PATCH v3 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Hannes Reinecke
• Re: [PATCH v3 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Hannes Reinecke
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: David Gow
• Re: [PATCH v3 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Hannes Reinecke
• Re: [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Niklas Cassel
• Re: [PATCH v4 27/42] dt-bindings: ata: Add Cirrus EP93xx
  • From: Krzysztof Kozlowski
• Re: [PATCH v4 28/42] ata: pata_ep93xx: add device tree support
  • From: Sergey Shtylyov
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Niklas Cassel
• Re: [PATCH v4 38/42] ata: pata_ep93xx: remove legacy pinctrl use
  • From: Linus Walleij
• Re: [PATCH v4 28/42] ata: pata_ep93xx: add device tree support
  • From: Damien Le Moal
• [PATCH v3 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v3 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v3 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• [PATCH v3 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v3 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v3 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v3 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v3 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v3 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v3 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v3 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v3 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v3 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• [PATCH v3 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v3 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH v3 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v3 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH v3 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v3 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH v3 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v3 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v3 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v3 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v4 27/42] dt-bindings: ata: Add Cirrus EP93xx
  • From: Nikita Shubin via B4 Relay
• [PATCH v4 38/42] ata: pata_ep93xx: remove legacy pinctrl use
  • From: Nikita Shubin via B4 Relay
• [PATCH v4 28/42] ata: pata_ep93xx: add device tree support
  • From: Nikita Shubin via B4 Relay
• [PATCH v4 00/42] ep93xx device tree conversion
  • From: Nikita Shubin via B4 Relay
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Damien Le Moal
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: David Gow
• Re: [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Damien Le Moal
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Damien Le Moal
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: David Gow
• Re: [PATCH v2 07/21] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Damien Le Moal
• Re: [PATCH 05/19] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• Re: [PATCH 08/19] scsi: Remove scsi device no_start_on_resume flag
  • From: Bart Van Assche
• Re: [PATCH 05/19] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Bart Van Assche
• Re: [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Phillip Susi
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Phillip Susi
• Re: [PATCH v2 07/21] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Bart Van Assche
• Re: [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Bart Van Assche
• Re: [PATCH v2 03/21] ata: libata-scsi: link ata port and scsi device
  • From: Geert Uytterhoeven
• Re: [PATCH v2 03/21] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Niklas Cassel
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Niklas Cassel
• Re: [PATCH v2 03/21] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• Re: [PATCH v2 03/21] ata: libata-scsi: link ata port and scsi device
  • From: Geert Uytterhoeven
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Geert Uytterhoeven
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Geert Uytterhoeven
• Re: [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Damien Le Moal
• Re: [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Hannes Reinecke
• Re: [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Damien Le Moal
• Re: [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Damien Le Moal
• [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Niklas Cassel
• [PATCH 1/2] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Niklas Cassel
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Bart Van Assche
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Niklas Cassel
• [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Niklas Cassel
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Bjorn Helgaas
• Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Bagas Sanjaya