Linux IDE Archive

• Thread Index

• Re: [PATCH 1/4] pata_parport: fix pata_parport_devchk
  • From: Sergei Shtylyov
• Re: [PATCH 4/4] pata_parport-fit3: implement IDE command set registers
  • From: Ondrej Zary
• Re: [PATCH 1/4] pata_parport: fix pata_parport_devchk
  • From: Ondrej Zary
• Re: [PATCH 3/4] pata_parport: add custom version of wait_after_reset
  • From: Sergey Shtylyov
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Rafael J. Wysocki
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Petr Tesařík
• Re: Thinkpad E595 system deadlock on resume from S3
  • From: Petr Tesařík
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Mika Westerberg
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Damien Le Moal
• Re: [PATCH 4/4] pata_parport-fit3: implement IDE command set registers
  • From: Damien Le Moal
• Re: [PATCH 3/4] pata_parport: add custom version of wait_after_reset
  • From: Damien Le Moal
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Damien Le Moal
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH 0/4] pata_parport: fix EXP Computer CD-865 with MC-1285B EPP cable
  • From: Damien Le Moal
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Phillip Susi
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Phillip Susi
• Re: [PATCH 3/4] pata_parport: add custom version of wait_after_reset
  • From: Sergey Shtylyov
• Re: [PATCH 4/4] pata_parport-fit3: implement IDE command set registers
  • From: Sergey Shtylyov
• Re: [PATCH 2/4] pata_parport: implement set_devctl
  • From: Sergey Shtylyov
• Re: [PATCH 1/4] pata_parport: fix pata_parport_devchk
  • From: Sergey Shtylyov
• Re: [PATCH 1/4] pata_parport: fix pata_parport_devchk
  • From: Sergey Shtylyov
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Mika Westerberg
• [PATCH 4/4] pata_parport-fit3: implement IDE command set registers
  • From: Ondrej Zary
• [PATCH 0/4] pata_parport: fix EXP Computer CD-865 with MC-1285B EPP cable
  • From: Ondrej Zary
• [PATCH 1/4] pata_parport: fix pata_parport_devchk
  • From: Ondrej Zary
• [PATCH 2/4] pata_parport: implement set_devctl
  • From: Ondrej Zary
• [PATCH 3/4] pata_parport: add custom version of wait_after_reset
  • From: Ondrej Zary
• Re: [GIT PULL] ata fixes for 6.6-rc4
  • From: pr-tracker-bot
• Re: [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Geert Uytterhoeven
• Re: [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• [GIT PULL] ata fixes for 6.6-rc4
  • From: Damien Le Moal
• Re: [PATCH AUTOSEL 4.14 6/6] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Niklas Cassel
• Re: [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Geert Uytterhoeven
• Re: [PATCH v8 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Martin K. Petersen
• Re: [PATCH v8 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Martin K. Petersen
• Re: [PATCH v8 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Martin K. Petersen
• Re: [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Martin K. Petersen
• Re: [PATCH v7 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• Re: [PATCH v7 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• Re: [PATCH v7 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• [PATCH v8 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v8 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v8 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v8 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v8 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v8 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v8 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v8 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v8 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH v8 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v8 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v8 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH v8 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v8 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v8 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v8 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v8 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH v8 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v8 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• [PATCH v8 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v8 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v8 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v8 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v8 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v7 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Hannes Reinecke
• Re: [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• Re: [PATCH v6 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Bart Van Assche
• Re: [PATCH v6 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Bart Van Assche
• Re: [PATCH v6 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Bart Van Assche
• Re: [PATCH v6 02/23] ata: libata-core: Fix port and device removal
  • From: Bart Van Assche
• Re: [PATCH v6 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Bart Van Assche
• Re: [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Phillip Susi
• Re: [PATCH v6 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Phillip Susi
• Re: [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• [PATCH v7 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v7 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v7 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v7 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v7 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH v7 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v7 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v7 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v7 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH v7 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH v7 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v7 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v7 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v7 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v7 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v7 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• [PATCH v7 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v7 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v7 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v7 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v7 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v7 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v7 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v7 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• Re: [PATCH v6 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• Re: [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• Re: [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Koba Ko
• Re: [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• Re: [PATCH v6 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Phillip Susi
• Re: [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Phillip Susi
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Damien Le Moal
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Mika Westerberg
• Re: [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Damien Le Moal
• [PATCH] ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
  • From: Mika Westerberg
• Re: [PATCH] ata: libata: increase PMP SRST timeout to 10s
  • From: Damien Le Moal
• Re: [PATCH] libata: Annotate struct ata_cpr_log with __counted_by
  • From: Damien Le Moal
• Re: [PATCH] ahci: add identifiers for ASM2116 series devices.
  • From: Damien Le Moal
• [PATCH AUTOSEL 6.1 28/28] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.10 13/13] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 7/7] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.1 16/28] ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  • From: Sasha Levin
• [PATCH AUTOSEL 5.15 18/18] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 7/7] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 6/6] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.5 40/41] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.5 41/41] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Sasha Levin
• [PATCH AUTOSEL 6.5 19/41] ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  • From: Sasha Levin
• Re: [PATCH] libata: Annotate struct ata_cpr_log with __counted_by
  • From: Gustavo A. R. Silva
• [PATCH v6 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v6 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v6 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v6 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v6 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v6 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v6 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v6 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v6 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH v6 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v6 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v6 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH v6 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v6 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v6 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v6 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH v6 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v6 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v6 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v6 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v6 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v6 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• [PATCH] ata: libata: increase PMP SRST timeout to 10s
  • From: Matthias Schiffer
• Re: [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• Re: [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• Re: [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Damien Le Moal
• Re: [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Matthias Schiffer
• Re: [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• Re: [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Damien Le Moal
• Re: [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Matthias Schiffer
• Re: [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• [PATCH] libata: Annotate struct ata_cpr_log with __counted_by
  • From: Kees Cook
• Re: [PATCH v4 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Damien Le Moal
• [RFC] ata: libata: increase PMP SRST timeout to 10s
  • From: Matthias Schiffer
• Re: [PATCH v5 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Sergey Shtylyov
• Re: [PATCH v5 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• Re: [PATCH v5 03/23] ata: libata-scsi: link ata port and scsi device
  • From: John Garry
• Re: [PATCH v5 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Martin K. Petersen
• Re: [PATCH v5 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Martin K. Petersen
• Re: [PATCH v4 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v5 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v5 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v5 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• Re: [PATCH v4 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Bart Van Assche
• Re: [PATCH v4 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• [PATCH v5 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v5 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v5 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v5 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v5 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v5 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH v5 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• [PATCH v5 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v5 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v5 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v5 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v5 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v5 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v5 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v5 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• Re: [PATCH v4 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v5 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v5 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• Re: [PATCH v4 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v4 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Geert Uytterhoeven
• Re: [PATCH v4 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH v4 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v5 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v5 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v5 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v5 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH] ahci: add identifiers for ASM2116 series devices.
  • From: Szuying Chen
• Re: [PATCH v4 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: John Garry
• Re: [PATCH v4 03/23] ata: libata-scsi: link ata port and scsi device
  • From: John Garry
• Re: [PATCH v4 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Sergey Shtylyov
• Re: [PATCH v4 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Geert Uytterhoeven
• Re: [PATCH v4 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Niklas Cassel
• Re: [PATCH v4 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Niklas Cassel
• [PATCH v4 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v4 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v4 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v4 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v4 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v4 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v4 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH v4 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v4 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v4 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH v4 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v4 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v4 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v4 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v4 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• [PATCH v4 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v4 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v4 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v4 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v4 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• [PATCH v4 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v4 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v4 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v4 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Niklas Cassel
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Niklas Cassel
• Re: [PATCH v3 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• Re: [PATCH] ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
  • From: Damien Le Moal
• Re: [PATCH] dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
  • From: Damien Le Moal
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• Re: [PATCH v3 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• Re: [PATCH v3 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Niklas Cassel
• Re: [PATCH v3 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Niklas Cassel
• Re: [PATCH v3 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Niklas Cassel
• Re: [PATCH v3 02/23] ata: libata-core: Fix port and device removal
  • From: Niklas Cassel
• Re: [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Niklas Cassel
• Re: Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Bagas Sanjaya
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Linux regression tracking #update (Thorsten Leemhuis)
• Re: Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Linux regression tracking #update (Thorsten Leemhuis)
• Re: Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Bagas Sanjaya
• Re: [PATCH] ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
  • From: Niklas Cassel
• [PATCH] ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
  • From: Niklas Cassel
• Re: Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Bagas Sanjaya
• Re: [PATCH v4 00/42] ep93xx device tree conversion
  • From: Andy Shevchenko
• Re: Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Niklas Cassel
• Fwd: Marvell RAID Controller issues since 6.5.x
  • From: Bagas Sanjaya
• Re: [GIT PULL] ata fixes for 6.6-rc2
  • From: pr-tracker-bot
• [GIT PULL] ata fixes for 6.6-rc2
  • From: Damien Le Moal
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: David Gow
• Re: [PATCH] dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
  • From: Conor Dooley
• [PATCH] dt-bindings: ata: pata-common: Add missing additionalProperties on child nodes
  • From: Rob Herring
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Niklas Cassel
• Re: [PATCH v3 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Bart Van Assche
• Re: [PATCH v3 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Hannes Reinecke
• Re: [PATCH v3 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Hannes Reinecke
• Re: [PATCH v3 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Hannes Reinecke
• Re: [PATCH v3 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Hannes Reinecke
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: David Gow
• Re: [PATCH v3 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Hannes Reinecke
• Re: [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Niklas Cassel
• Re: [PATCH v4 27/42] dt-bindings: ata: Add Cirrus EP93xx
  • From: Krzysztof Kozlowski
• Re: [PATCH v4 28/42] ata: pata_ep93xx: add device tree support
  • From: Sergey Shtylyov
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Niklas Cassel
• Re: [PATCH v4 38/42] ata: pata_ep93xx: remove legacy pinctrl use
  • From: Linus Walleij
• Re: [PATCH v4 28/42] ata: pata_ep93xx: add device tree support
  • From: Damien Le Moal
• [PATCH v3 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown
  • From: Damien Le Moal
• [PATCH v3 16/23] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v3 00/23] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• [PATCH v3 17/23] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH v3 18/23] ata: libata-core: Do not poweroff runtime suspended ports
  • From: Damien Le Moal
• [PATCH v3 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v3 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v3 22/23] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v3 03/23] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v3 19/23] ata: libata-core: Do not resume runtime suspended ports
  • From: Damien Le Moal
• [PATCH v3 01/23] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v3 20/23] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v3 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v3 06/23] scsi: Do not attempt to rescan suspended devices
  • From: Damien Le Moal
• [PATCH v3 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v3 12/23] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH v3 08/23] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v3 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH v3 23/23] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v3 15/23] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH v3 21/23] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v3 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop
  • From: Damien Le Moal
• [PATCH v3 04/23] scsi: sd: Differentiate system and runtime start/stop management
  • From: Damien Le Moal
• [PATCH v3 02/23] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v4 27/42] dt-bindings: ata: Add Cirrus EP93xx
  • From: Nikita Shubin via B4 Relay
• [PATCH v4 38/42] ata: pata_ep93xx: remove legacy pinctrl use
  • From: Nikita Shubin via B4 Relay
• [PATCH v4 28/42] ata: pata_ep93xx: add device tree support
  • From: Nikita Shubin via B4 Relay
• [PATCH v4 00/42] ep93xx device tree conversion
  • From: Nikita Shubin via B4 Relay
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Damien Le Moal
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: David Gow
• Re: [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Damien Le Moal
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Damien Le Moal
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: David Gow
• Re: [PATCH v2 07/21] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Damien Le Moal
• Re: [PATCH 05/19] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• Re: [PATCH 08/19] scsi: Remove scsi device no_start_on_resume flag
  • From: Bart Van Assche
• Re: [PATCH 05/19] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Bart Van Assche
• Re: [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Phillip Susi
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Phillip Susi
• Re: [PATCH v2 07/21] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Bart Van Assche
• Re: [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Bart Van Assche
• Re: [PATCH v2 03/21] ata: libata-scsi: link ata port and scsi device
  • From: Geert Uytterhoeven
• Re: [PATCH v2 03/21] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Niklas Cassel
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Niklas Cassel
• Re: [PATCH v2 03/21] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• Re: [PATCH v2 03/21] ata: libata-scsi: link ata port and scsi device
  • From: Geert Uytterhoeven
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Geert Uytterhoeven
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Geert Uytterhoeven
• Re: [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Damien Le Moal
• Re: [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Hannes Reinecke
• Re: [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Damien Le Moal
• Re: [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Damien Le Moal
• Re: [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Damien Le Moal
• [PATCH 2/2] ata: libata-eh: do not thaw the port twice in ata_eh_reset()
  • From: Niklas Cassel
• [PATCH 1/2] ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
  • From: Niklas Cassel
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Bart Van Assche
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Niklas Cassel
• [PATCH] ata: libata-core: fetch sense data for successful commands iff CDL enabled
  • From: Niklas Cassel
• Re: Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Bjorn Helgaas
• Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset
  • From: Bagas Sanjaya
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Geert Uytterhoeven
• Re: [PATCH v2 03/21] ata: libata-scsi: link ata port and scsi device
  • From: Geert Uytterhoeven
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Geert Uytterhoeven
• Re: [PATCH 19/19] ata: libata: Cleanup inline DMA helper functions
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 18/19] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 17/19] ata: libata-eh: Improve reset error messages
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 16/19] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 15/19] ata: libata-core: Do not resume ports that have been runtime suspended
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 14/19] ata: libata-core: skip poweroff for devices that are runtime suspended
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 13/19] ata: libata-core: Remove ata_port_resume_async()
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 12/19] ata: libata-core: Remove ata_port_suspend_async()
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 11/19] ata: libata-core: Detach a port devices on shutdown
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 10/19] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 09/19] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 08/19] scsi: Remove scsi device no_start_on_resume flag
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 06/19] ata: libata-core: Do not register PM operations for SAS ports
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 05/19] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 02/19] ata: libata-core: Fix port and device removal
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH 01/19] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Chia-Lin Kao (AceLan)
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Geert Uytterhoeven
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: John Garry
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: John Garry
• Re: [PATCH v2 18/21] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• Re: [PATCH v2 18/21] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: John Garry
• Re: [PATCH v2 09/21] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Hannes Reinecke
• Re: [PATCH v2 08/21] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Hannes Reinecke
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v2 16/21] ata: libata-core: skip poweroff for devices that are runtime suspended
  • From: Damien Le Moal
• [PATCH v2 17/21] ata: libata-core: Do not resume ports that have been runtime suspended
  • From: Damien Le Moal
• [PATCH v2 10/21] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH v2 03/21] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH v2 13/21] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH v2 00/21] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• [PATCH v2 18/21] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH v2 11/21] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH v2 21/21] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH v2 06/21] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH v2 01/21] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH v2 02/21] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH v2 09/21] ata: libata-eh: Fix compilation warning in ata_eh_link_report()
  • From: Damien Le Moal
• [PATCH v2 04/21] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Damien Le Moal
• [PATCH v2 05/21] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH v2 19/21] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH v2 08/21] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
  • From: Damien Le Moal
• [PATCH v2 14/21] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH v2 20/21] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH v2 07/21] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Damien Le Moal
• [PATCH v2 12/21] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH v2 15/21] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• Re: [PATCH 17/19] ata: libata-eh: Improve reset error messages
  • From: John Garry
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• Re: [PATCH v4] ata: libata-eh: Honor all EH scheduling requests
  • From: Li Nan
• Re: [PATCH 18/19] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Sergei Shtylyov
• Re: [PATCH v4] ata: libata-eh: Honor all EH scheduling requests
  • From: Niklas Cassel
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: John Garry
• Re: [PATCH v4] ata: libata-eh: Honor all EH scheduling requests
  • From: Li Nan
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: John Garry
• Re: [PATCH v4] ata: libata-eh: Honor all EH scheduling requests
  • From: Damien Le Moal
• Re: [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Hannes Reinecke
• Re: [PATCH 02/19] ata: libata-core: Fix port and device removal
  • From: Hannes Reinecke
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Hannes Reinecke
• Re: [PATCH 19/19] ata: libata: Cleanup inline DMA helper functions
  • From: Hannes Reinecke
• Re: [PATCH 18/19] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Hannes Reinecke
• Re: [PATCH 17/19] ata: libata-eh: Improve reset error messages
  • From: Hannes Reinecke
• Re: [PATCH 16/19] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Hannes Reinecke
• Re: [PATCH 15/19] ata: libata-core: Do not resume ports that have been runtime suspended
  • From: Hannes Reinecke
• Re: [PATCH 14/19] ata: libata-core: skip poweroff for devices that are runtime suspended
  • From: Hannes Reinecke
• Re: [PATCH 13/19] ata: libata-core: Remove ata_port_resume_async()
  • From: Hannes Reinecke
• Re: [PATCH 12/19] ata: libata-core: Remove ata_port_suspend_async()
  • From: Hannes Reinecke
• Re: [PATCH 11/19] ata: libata-core: Detach a port devices on shutdown
  • From: Hannes Reinecke
• Re: [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Damien Le Moal
• Re: [PATCH 10/19] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Hannes Reinecke
• Re: [PATCH 09/19] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Hannes Reinecke
• Re: [PATCH 08/19] scsi: Remove scsi device no_start_on_resume flag
  • From: Hannes Reinecke
• Re: [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Hannes Reinecke
• Re: [PATCH 06/19] ata: libata-core: Do not register PM operations for SAS ports
  • From: Hannes Reinecke
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• Re: [PATCH 05/19] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Hannes Reinecke
• Re: [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Hannes Reinecke
• Re: [PATCH 02/19] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• Re: [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Hannes Reinecke
• Re: [PATCH 02/19] ata: libata-core: Fix port and device removal
  • From: Hannes Reinecke
• Re: [PATCH 01/19] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Hannes Reinecke
• Re: [PATCH v2] ata: ahci: print the lpm policy on boot
  • From: Damien Le Moal
• Re: [PATCH v4] ahci: libahci: clear pending interrupt status
  • From: Damien Le Moal
• Re: [PATCH] ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  • From: Damien Le Moal
• Re: [PATCH] ata: libata: disallow dev-initiated LPM transitions to unsupported states
  • From: Damien Le Moal
• [PATCH 18/19] ata: libata-eh: Reduce "disable device" message verbosity
  • From: Damien Le Moal
• [PATCH 19/19] ata: libata: Cleanup inline DMA helper functions
  • From: Damien Le Moal
• [PATCH 17/19] ata: libata-eh: Improve reset error messages
  • From: Damien Le Moal
• [PATCH 16/19] ata: libata-sata: Improve ata_sas_slave_configure()
  • From: Damien Le Moal
• [PATCH 15/19] ata: libata-core: Do not resume ports that have been runtime suspended
  • From: Damien Le Moal
• [PATCH 14/19] ata: libata-core: skip poweroff for devices that are runtime suspended
  • From: Damien Le Moal
• [PATCH 13/19] ata: libata-core: Remove ata_port_resume_async()
  • From: Damien Le Moal
• [PATCH 12/19] ata: libata-core: Remove ata_port_suspend_async()
  • From: Damien Le Moal
• [PATCH 11/19] ata: libata-core: Detach a port devices on shutdown
  • From: Damien Le Moal
• [PATCH 10/19] ata: libata-core: Synchronize ata_port_detach() with hotplug
  • From: Damien Le Moal
• [PATCH 08/19] scsi: Remove scsi device no_start_on_resume flag
  • From: Damien Le Moal
• [PATCH 09/19] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
  • From: Damien Le Moal
• [PATCH 07/19] scsi: sd: Do not issue commands to suspended disks on remove
  • From: Damien Le Moal
• [PATCH 06/19] ata: libata-core: Do not register PM operations for SAS ports
  • From: Damien Le Moal
• [PATCH 04/19] ata: libata-scsi: Disable scsi device manage_start_stop
  • From: Damien Le Moal
• [PATCH 05/19] ata: libata-scsi: Fix delayed scsi_rescan_device() execution
  • From: Damien Le Moal
• [PATCH 03/19] ata: libata-scsi: link ata port and scsi device
  • From: Damien Le Moal
• [PATCH 02/19] ata: libata-core: Fix port and device removal
  • From: Damien Le Moal
• [PATCH 01/19] ata: libata-core: Fix ata_port_request_pm() locking
  • From: Damien Le Moal
• [PATCH 00/19] Fix libata suspend/resume handling and code cleanup
  • From: Damien Le Moal
• Re: [PATCH] ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  • From: Christophe JAILLET
• Re: [PATCH v4] ata: libata-eh: Honor all EH scheduling requests
  • From: Niklas Cassel
• [PATCH v4] ahci: libahci: clear pending interrupt status
  • From: Szuying Chen
• Re: [PATCH v4] ata: libata-eh: Honor all EH scheduling requests
  • From: kernel test robot
• Re: [PATCH v4] ahci: libahci: clear pending interrupt status
  • From: Niklas Cassel
• Re: [PATCH v2] ata: ahci: print the lpm policy on boot
  • From: Niklas Cassel
• Re: [PATCH v3] ahci: libahci: clear pending interrupt status
  • From: Damien Le Moal
• Re: [PATCH v2] ata: ahci: print the lpm policy on boot
  • From: Damien Le Moal
• Re: [PATCH v3] ahci: libahci: clear pending interrupt status
  • From: Niklas Cassel
• Re: [PATCH v2] ata: ahci: Add Elkhart Lake AHCI controller
  • From: Werner Fischer
• Re: [PATCH v3] ahci: libahci: clear pending interrupt status
  • From: Damien Le Moal
• Re: [PATCH v3] ahci: libahci: clear pending interrupt status
  • From: Niklas Cassel
• Re: [PATCH] ata: ahci: print the lpm policy on boot
  • From: Niklas Cassel
• [PATCH v3] ahci: libahci: clear pending interrupt status
  • From: Szuying Chen
• Re: [PATCH] ata: ahci: print the lpm policy on boot
  • From: Hannes Reinecke
• [PATCH v2] ata: ahci: print the lpm policy on boot
  • From: Niklas Cassel
• [PATCH v4] ata: libata-eh: Honor all EH scheduling requests
  • From: linan666
• Re: [PATCH] ata: ahci: print the lpm policy on boot
  • From: Damien Le Moal
• Re: [PATCH] ata: ahci: print the lpm policy on boot
  • From: Niklas Cassel
• Re: Cache coherency bug: stale reads on /dev/sda1
  • From: Hannes Reinecke
• Re: [PATCH v3] ata: libata-eh: Honor all EH scheduling requests
  • From: Niklas Cassel
• Re: [PATCH v3] ata: libata-eh: Honor all EH scheduling requests
  • From: Damien Le Moal
• Re: [PATCH] ata: ahci: print the lpm policy on boot
  • From: Damien Le Moal
• [PATCH v3] ata: libata-eh: Honor all EH scheduling requests
  • From: linan666
• Re: [PATCH] ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  • From: Damien Le Moal
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [GIT PULL] ata changes for 6.6-rc1
  • From: pr-tracker-bot
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Rodrigo Vivi
• [PATCH v2] scsi: ata: Fix a race condition between scsi error handler and ahci interrupt
  • From: linan666
• Re: [PATCH] ata: libata: disallow dev-initiated LPM transitions to unsupported states
  • From: Damien Le Moal
• Re: [PATCH] ata: libata: disallow dev-initiated LPM transitions to unsupported states
  • From: Damien Le Moal
• [PATCH] ata: ahci: print the lpm policy on boot
  • From: Niklas Cassel
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH v2] scsi: ata: Fix a race condition between scsi error handler and ahci interrupt
  • From: Li Nan
• [GIT PULL] ata changes for 6.6-rc1
  • From: Damien Le Moal
• Re: [PATCH] ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  • From: Christophe JAILLET
• Re: [PATCH] ata: libata: disallow dev-initiated LPM transitions to unsupported states
  • From: Niklas Cassel
• Re: [PATCH v2] scsi: ata: Fix a race condition between scsi error handler and ahci interrupt
  • From: Damien Le Moal
• Re: [PATCH] ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  • From: Damien Le Moal
• [PATCH] ata: libata: disallow dev-initiated LPM transitions to unsupported states
  • From: Niklas Cassel
• [PATCH] ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
  • From: Christophe JAILLET
• Re: [PATCH] scsi: ata: Fix a race condition between scsi error handler and ahci interrupt
  • From: Li Nan
• Re: [PATCH] scsi: ata: Fix a race condition between scsi error handler and ahci interrupt
  • From: Niklas Cassel
• Re: [PATCH] scsi: ata: Fix a race condition between scsi error handler and ahci interrupt
  • From: Li Nan
• Re: [PATCH] [V2] ata: libata: add workaround to flip LPM during suspend/resume
  • From: Thorsten Leemhuis
• Re: [PATCH v3] ata: Disable NCQ_TRIM on Micron 1100 drives
  • From: Damien Le Moal
• Re: [PATCH v2] ata: ahci: Add Elkhart Lake AHCI controller
  • From: Damien Le Moal
• Re: [PATCH v3] ata: Disable NCQ_TRIM on Micron 1100 drives
  • From: Damien Le Moal
• Re: [PATCH v2] ata: ahci: Add Elkhart Lake AHCI controller
  • From: Niklas Cassel
• Re: [PATCH v3] ata: Disable NCQ_TRIM on Micron 1100 drives
  • From: Niklas Cassel
• Re: [PATCH] [V2] ata: libata: add workaround to flip LPM during suspend/resume
  • From: Niklas Cassel
• [PATCH v3] ata: Disable NCQ_TRIM on Micron 1100 drives
  • From: Pawel Zmarzly
• Re: [PATCH v2] ata: Disable NCQ_TRIM on Micron 1100 drives
  • From: Niklas Cassel
• [PATCH v2] ata: Disable NCQ_TRIM on Micron 1100 drives
  • From: Pawel Zmarzly
• Re: [PATCH] ata: Disable NCQ_TRIM on Micron 1100 drives
  • From: Niklas Cassel
• Re: [PATCH v2] ahci: libahci: clear pending interrupt status
  • From: Niklas Cassel
• [PATCH v2] ahci: libahci: clear pending interrupt status
  • From: Szuying Chen
• [PATCH] [V2] ata: libata: add workaround to flip LPM during suspend/resume
  • From: Koba Ko
• Re: [PATCH] ata: libata: add workaround to flip LPM during suspend/resume
  • From: Koba Ko
• Re: [PATCH] ata: libata: add workaround to flip LPM during suspend/resume
  • From: kernel test robot
• [PATCH] ata: libata: add workaround to flip LPM during suspend/resume
  • From: Koba Ko
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH] ahci: libahci: clear pending interrupt status
  • From: Damien Le Moal
• [PATCH] ahci: libahci: clear pending interrupt status
  • From: Szuying Chen
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Vivi, Rodrigo
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• [PATCH] ata: Disable NCQ_TRIM on Micron 1100 drives
  • From: Pawel Zmarzly
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Rodrigo Vivi
• Re: [PATCH 1/9] ARM: Remove <asm/ide.h>
  • From: Arnd Bergmann
• Re: [PATCH] ata: Add Elkhart Lake AHCI controller
  • From: Werner Fischer
• Re: [PATCH] ata: Add Elkhart Lake AHCI controller
  • From: Niklas Cassel
• [PATCH v2] ata: ahci: Add Elkhart Lake AHCI controller
  • From: Werner Fischer
• Re: [PATCH] ata: Add Elkhart Lake AHCI controller
  • From: Werner Fischer
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH] ata: Add Elkhart Lake AHCI controller
  • From: Damien Le Moal
• Re: [PATCH v6 0/2] Q40 IDE fixes
  • From: Michael Schmitz
• Re: Re: [PATCH] ahci: libahci: clear pending interrupt status
  • From: Niklas Cassel
• [PATCH] ata: Add Elkhart Lake AHCI controller
  • From: Werner Fischer
• Re: [PATCH v6 0/2] Q40 IDE fixes
  • From: Damien Le Moal
• Re: Cache coherency bug: stale reads on /dev/sda1
  • From: Joshua Hudson
• Re: Cache coherency bug: stale reads on /dev/sda1
  • From: Al Viro
• Re: Cache coherency bug: stale reads on /dev/sda1
  • From: Joshua Hudson
• Re: Cache coherency bug: stale reads on /dev/sda1
  • From: Al Viro
• [PATCH v6 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Michael Schmitz
• [PATCH v6 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• [PATCH v6 0/2] Q40 IDE fixes
  • From: Michael Schmitz
• Re: Cache coherency bug: stale reads on /dev/sda1
  • From: Bagas Sanjaya
• Re: Cache coherency bug: stale reads on /dev/sda1
  • From: Joshua Hudson
• Re: Cache coherency bug: stale reads on /dev/sda1
  • From: Al Viro
• Re: Cache coherency bug: stale reads on /dev/sda1
  • From: Joshua Hudson
• Re: Cache coherency bug: stale reads on /dev/sda1
  • From: Bagas Sanjaya
• Re: [PATCH v5 0/2] Q40 IDE fixes
  • From: William R Sowerbutts
• Re: [PATCH v5 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Damien Le Moal
• Re: [PATCH v5 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Michael Schmitz
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Rodrigo Vivi
• Re: [PATCH 0/2] ata: pata_ep93xx: dt convert preparation fixes
  • From: Damien Le Moal
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH 1/2] ata: pata_ep93xx: fix error return code in probe
  • From: Nikita Shubin
• Re: [PATCH 1/2] ata: pata_ep93xx: fix error return code in probe
  • From: Damien Le Moal
• Re: [PATCH v5 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Geert Uytterhoeven
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Martin K. Petersen
• [PATCH v5 0/2] Q40 IDE fixes
  • From: Michael Schmitz
• [PATCH v5 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• [PATCH v5 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Michael Schmitz
• Re: [PATCH v4 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Damien Le Moal
• Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume
  • From: Rodrigo Vivi
• Re: Re: [PATCH] ahci: libahci: clear pending interrupt status
  • From: Szuying Chen
• Re: [PATCH v4 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Sergey Shtylyov
• Re: [PATCH 0/2] Fix compilation warnings
  • From: Linus Walleij
• Re: [PATCH v4 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Michael Schmitz
• Re: [PATCH v4 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• Re: [PATCH v4 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• Re: [PATCH v4 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Michael Schmitz
• Re: [PATCH 1/2] ata: pata_ep93xx: fix error return code in probe
  • From: Damien Le Moal
• Re: [PATCH v4 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Damien Le Moal
• Re: [PATCH treewide 0/9] Remove obsolete IDE headers
  • From: Damien Le Moal
• [PATCH 0/2] Fix compilation warnings
  • From: Damien Le Moal
• [PATCH 1/2] ata: pata_ftide010: Add missing MODULE_DESCRIPTION
  • From: Damien Le Moal
• [PATCH 2/2] ata: sata_gemini: Add missing MODULE_DESCRIPTION
  • From: Damien Le Moal
• Re: [PATCH v4 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Sergey Shtylyov
• Re: [PATCH v4 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Sergey Shtylyov
• Re: [PATCH 2/2] ata: pata_ep93xx: use soc_device_match for UDMA modes
  • From: Sergey Shtylyov
• Re: [PATCH 1/2] ata: pata_ep93xx: fix error return code in probe
  • From: Sergey Shtylyov
• Re: [PATCH v3 29/42] dt-bindings: rtc: Add ST M48T86
  • From: Krzysztof Kozlowski
• [PATCH 1/2] ata: pata_ep93xx: fix error return code in probe
  • From: Nikita Shubin via B4 Relay
• [PATCH 0/2] ata: pata_ep93xx: dt convert preparation fixes
  • From: Nikita Shubin via B4 Relay
• [PATCH 2/2] ata: pata_ep93xx: use soc_device_match for UDMA modes
  • From: Nikita Shubin via B4 Relay
• Re: [PATCH v4 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Geert Uytterhoeven
• Re: [PATCH v4 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Geert Uytterhoeven
• Re: [PATCH v4 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Geert Uytterhoeven
• [PATCH v4 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Michael Schmitz
• [PATCH v4 0/2] Q40 IDE fixes
  • From: Michael Schmitz
• [PATCH v4 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• Re: [PATCH 2/3] m68k/q40: add data_swab option for pata_falcon to byte-swap disk data
  • From: Michael Schmitz
• Re: [PATCH 2/3] m68k/q40: add data_swab option for pata_falcon to byte-swap disk data
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] m68k/q40: add data_swab option for pata_falcon to byte-swap disk data
  • From: Sergei Shtylyov
• Re: [PATCH] scsi: ata: Fix a race condition between scsi error handler and ahci interrupt
  • From: Niklas Cassel
• Re: [PATCH] scsi: ata: Fix a race condition between scsi error handler and ahci interrupt
  • From: Li Nan
• Re: Re: [PATCH] ahci: libahci: clear pending interrupt status
  • From: Niklas Cassel
• Re: [PATCH v3 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Geert Uytterhoeven
• Re: [PATCH v3 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• Re: [PATCH v3 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• Re: [PATCH v3 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Geert Uytterhoeven
• Re: [PATCH 1/9] ARM: Remove <asm/ide.h>
  • From: Damien Le Moal
• Re: [PATCH v3 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• Re: [PATCH] scsi: ata: Fix a race condition between scsi error handler and ahci interrupt
  • From: Niklas Cassel
• Re: [PATCH v3 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] m68k/q40: fix IO base selection for Q40 in pata_falcon.c
  • From: Michael Schmitz
• [RESEND PATCH v10 11/25] dept: Apply sdt_might_sleep_{start,end}() to hashed-waitqueue wait
  • From: Byungchul Park
• [RESEND PATCH v10 14/25] dept: Add a mechanism to refill the internal memory pools on running out
  • From: Byungchul Park
• [RESEND PATCH v10 02/25] dept: Implement Dept(Dependency Tracker)
  • From: Byungchul Park
• [RESEND PATCH v10 01/25] llist: Move llist_{head,node} definition to types.h
  • From: Byungchul Park
• [RESEND PATCH v10 09/25] dept: Apply sdt_might_sleep_{start,end}() to swait
  • From: Byungchul Park
• [RESEND PATCH v10 07/25] dept: Apply sdt_might_sleep_{start,end}() to wait_for_completion()/complete()
  • From: Byungchul Park
• [RESEND PATCH v10 13/25] dept: Distinguish each work from another
  • From: Byungchul Park
• [RESEND PATCH v10 19/25] dept: Apply timeout consideration to swait
  • From: Byungchul Park
• [RESEND PATCH v10 08/25] dept: Apply sdt_might_sleep_{start,end}() to PG_{locked,writeback} wait
  • From: Byungchul Park
• [RESEND PATCH v10 22/25] dept: Apply timeout consideration to dma fence wait
  • From: Byungchul Park
• [RESEND PATCH v10 10/25] dept: Apply sdt_might_sleep_{start,end}() to waitqueue wait
  • From: Byungchul Park
• Re: [RESEND PATCH v10 08/25] dept: Apply sdt_might_sleep_{start,end}() to PG_{locked,writeback} wait
  • From: Matthew Wilcox
• [RESEND PATCH v10 25/25] dept: Track the potential waits of PG_{locked,writeback}
  • From: Byungchul Park
• Re: [RESEND PATCH v10 25/25] dept: Track the potential waits of PG_{locked,writeback}
  • From: Matthew Wilcox
• [RESEND PATCH v10 04/25] dept: Add lock dependency tracker APIs
  • From: Byungchul Park
• [RESEND PATCH v10 05/25] dept: Tie to Lockdep and IRQ tracing
  • From: Byungchul Park
• [RESEND PATCH v10 16/25] dept: Apply sdt_might_sleep_{start,end}() to dma fence wait
  • From: Byungchul Park
• [RESEND PATCH v10 06/25] dept: Add proc knobs to show stats and dependency graph
  • From: Byungchul Park
• [RESEND PATCH v10 12/25] dept: Distinguish each syscall context from another
  • From: Byungchul Park
• Re: [RESEND PATCH v10 08/25] dept: Apply sdt_might_sleep_{start,end}() to PG_{locked,writeback} wait
  • From: Byungchul Park
• [RESEND PATCH v10 20/25] dept: Apply timeout consideration to waitqueue wait
  • From: Byungchul Park
• [RESEND PATCH v10 24/25] dept: Make Dept able to work with an external wgen
  • From: Byungchul Park
• Re: [RESEND PATCH v10 25/25] dept: Track the potential waits of PG_{locked,writeback}
  • From: Byungchul Park
• [RESEND PATCH v10 17/25] dept: Track timeout waits separately with a new Kconfig
  • From: Byungchul Park
• [RESEND PATCH v10 15/25] locking/lockdep, cpu/hotplus: Use a weaker annotation in AP thread
  • From: Byungchul Park
• [RESEND PATCH v10 18/25] dept: Apply timeout consideration to wait_for_completion()/complete()
  • From: Byungchul Park
• [RESEND PATCH v10 21/25] dept: Apply timeout consideration to hashed-waitqueue wait
  • From: Byungchul Park
• [RESEND PATCH v10 03/25] dept: Add single event dependency tracker APIs
  • From: Byungchul Park
• [RESEND PATCH v10 23/25] dept: Record the latest one out of consecutive waits of the same class
  • From: Byungchul Park
• [RESEND PATCH v10 00/25] DEPT(Dependency Tracker)
  • From: Byungchul Park
• Re: [PATCH 2/3] m68k/q40: add data_swab option for pata_falcon to byte-swap disk data
  • From: Michael Schmitz
• Re: [PATCH 1/3] m68k/q40: fix IO base selection for Q40 in pata_falcon.c
  • From: Michael Schmitz
• Re: [PATCH 2/3] m68k/q40: add data_swab option for pata_falcon to byte-swap disk data
  • From: Sergey Shtylyov
• Re: [PATCH 1/3] m68k/q40: fix IO base selection for Q40 in pata_falcon.c
  • From: Sergey Shtylyov
• Re: [PATCH v2 3/3] m68k/atari: change Falcon IDE platform device to id 0
  • From: Michael Schmitz
• Re: [PATCH v2 3/3] m68k/atari: change Falcon IDE platform device to id 0
  • From: Finn Thain
• Re: [PATCH v2 2/3] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Finn Thain
• [PATCH v3 1/2] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• [PATCH v3 2/2] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Michael Schmitz
• [PATCH v3 0/2] Q40 IDE fixes
  • From: Michael Schmitz
• Re: [PATCH v2 2/3] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Michael Schmitz
• Re: [PATCH v2 1/3] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• Re: [PATCH v2 3/3] m68k/atari: change Falcon IDE platform device to id 0
  • From: Michael Schmitz
• Re: [PATCH v2 3/3] m68k/atari: change Falcon IDE platform device to id 0
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/3] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/3] ata: pata_falcon: fix IO base selection for Q40
  • From: Finn Thain
• Re: [PATCH v2 2/3] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Finn Thain
• [PATCH v2 2/3] ata: pata_falcon: add data_swab option to byte-swap disk data
  • From: Michael Schmitz
• [PATCH v2 0/3] Q40 IDE fixes
  • From: Michael Schmitz
• [PATCH v2 1/3] ata: pata_falcon: fix IO base selection for Q40
  • From: Michael Schmitz
• [PATCH v2 3/3] m68k/atari: change Falcon IDE platform device to id 0
  • From: Michael Schmitz
• Re: [PATCH 3/9] powerpc: Remove <asm/ide.h>
  • From: Michael Ellerman
• Re: [PATCH 1/3] m68k/q40: fix IO base selection for Q40 in pata_falcon.c
  • From: Finn Thain
• Re: [PATCH 2/3] m68k/q40: add data_swab option for pata_falcon to byte-swap disk data
  • From: Michael Schmitz
• Re: [PATCH 2/3] m68k/q40: add data_swab option for pata_falcon to byte-swap disk data
  • From: Damien Le Moal
• Re: [PATCH 2/3] m68k/q40: add data_swab option for pata_falcon to byte-swap disk data
  • From: Michael Schmitz
• Re: [PATCH 1/3] m68k/q40: fix IO base selection for Q40 in pata_falcon.c
  • From: Michael Schmitz
• Re: [PATCH 2/3] m68k/q40: add data_swab option for pata_falcon to byte-swap disk data
  • From: Damien Le Moal
• Re: [PATCH 1/3] m68k/q40: fix IO base selection for Q40 in pata_falcon.c
  • From: Damien Le Moal