If an error occurs when resuming a host adapter before the devices attached to the adapter are resumed, the adapter low level driver may remove the scsi host, resulting in a call to sd_remove() for the disks of the host. This in turn results in a call to sd_shutdown() which will issue a synchronize cache command and a start stop unit command to spindown the disk. sd_shutdown() issues the commands only if the device is not already suspended but does not check the power state for system-wide suspend/resume. That is, the commands may be issued with the device in a suspended state, which causes PM resume to hang, forcing a reset of the machine to recover. Fix this by not calling sd_shutdown() in sd_remove() if the device is not running. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx> Reviewed-by: Hannes Reinecke <hare@xxxxxxx> Reviewed-by: Bart Van Assche <bvanassche@xxxxxxx> --- drivers/scsi/sd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 1d106c8ad5af..d86306d42445 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3727,7 +3727,8 @@ static int sd_remove(struct device *dev) device_del(&sdkp->disk_dev); del_gendisk(sdkp->disk); - sd_shutdown(dev); + if (sdkp->device->sdev_state == SDEV_RUNNING) + sd_shutdown(dev); put_disk(sdkp->disk); return 0; -- 2.41.0
