Some users of pata_falcon on Q40 have IDE disks in default
IDE little endian byte order, whereas legacy disks use
host-native big-endian byte order as on the Atari Falcon.
Add module parameter 'data_swab' to allow connecting drives
with non-native data byte order. Drives selected by the
data_swap bit mask will have their user data byte-swapped to
host byte order, i.e. 'pata_falcon.data_swab=2' will byte-swap
all user data on drive B, leaving data on drive A in native
byte order. On Q40, drives on a second IDE interface may be
added to the bit mask as bits 2 and 3.
Default setting is no byte swapping, i.e. compatibility with
the native Falcon or Q40 operating system disk format.
Cc: William R Sowerbutts <will@xxxxxxxxxxxxxx>
Cc: Finn Thain <fthain@xxxxxxxxxxxxxx>
Cc: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Tested-by: William R Sowerbutts <will@xxxxxxxxxxxxxx>
Signed-off-by: Michael Schmitz <schmitzmic@xxxxxxxxx>
---
Changes since v2:
Geert Uytterhoeven:
- only shift swap bitmask if pdev->id > 0
Finn Thain:
- use pdev->devno directly for byte swap check
Changes since v1:
Damien Le Moal:
- change patch title
- drop swap_data flag
Finn Thain:
- drop allocation of ap->private struct, use field as bitmask
Changes since RFC v4:
Geert Uytterhoeven:
- don't shift static module parameter for drive 3/4 bitmask
- simplify bit mask calculation to always use pdev->id
Finn Thain:
- correct bit numbers for drive 3/4
Changes since RFC v3:
- split off this byte swap handling into separate patch
- add hint regarding third and fourth drive on Q40
Finn Thain:
- rename module parameter to 'data_swab' to better reflect its use
William Sowerbutts:
- correct IDE drive number used in data swap conditional
---
drivers/ata/pata_falcon.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/pata_falcon.c b/drivers/ata/pata_falcon.c
index 3841ea200bcb..7cf15bd9764a 100644
--- a/drivers/ata/pata_falcon.c
+++ b/drivers/ata/pata_falcon.c
@@ -33,6 +33,11 @@
#define DRV_NAME "pata_falcon"
#define DRV_VERSION "0.1.0"
+static int pata_falcon_swap_mask;
+
+module_param_named(data_swab, pata_falcon_swap_mask, int, 0444);
+MODULE_PARM_DESC(data_swab, "Data byte swap enable/disable bitmap (0x1==drive1, 0x2==drive2, 0x4==drive3, 0x8==drive4, default==0)");
+
static const struct scsi_host_template pata_falcon_sht = {
ATA_PIO_SHT(DRV_NAME),
};
@@ -50,7 +55,7 @@ static unsigned int pata_falcon_data_xfer(struct ata_queued_cmd *qc,
if (dev->class == ATA_DEV_ATA && cmd &&
!blk_rq_is_passthrough(scsi_cmd_to_rq(cmd)))
- swap = 0;
+ swap = (uintptr_t)ap->private_data & BIT(dev->devno);
/* Transfer multiple of 2 bytes */
if (rw == READ) {
@@ -194,6 +199,9 @@ static int __init pata_falcon_init_one(struct platform_device *pdev)
ata_port_desc(ap, "cmd %px ctl %px data %pa",
base, ctl_base, &ap->ioaddr.data_addr);
+ ap->private_data = (void *)(uintptr_t)(pdev->id > 0 ?
+ pata_falcon_swap_mask >> 2 : pata_falcon_swap_mask);
+
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (irq_res && irq_res->start > 0) {
irq = irq_res->start;
--
2.17.1
