Elkhart Lake is the successor of Apollo Lake and Gemini Lake. These CPUs and their PCHs are used in mobile and embedded environments. With this patch I suggest that Elkhart Lake SATA controllers [1] should use the default LPM policy for mobile chipsets. The disadvantage of missing hot-plug support with this setting should not be an issue, as those CPUs are used in embedded environments and not in servers with hot-plug backplanes. We discovered that the Elkhart Lake SATA controllers have been missing in ahci.c after a customer reported the throttling of his SATA SSD after a short period of higher I/O. We determined the high temperature of the SSD controller in idle mode as the root cause for that. Depending on the used SSD, we have seen up to 1.8 Watt lower system idle power usage and up to 30°C lower SSD controller temperatures in our tests, when we set med_power_with_dipm manually. I have provided a table showing seven different SATA SSDs from ATP, Intel/Solidigm and Samsung [2]. Intel lists a total of 3 SATA controller IDs (4B60, 4B62, 4B63) in [1] for those mobile PCHs. This commit just adds 0x4b63 as I do not have test systems with 0x4b60 and 0x4b62 SATA controllers. I have tested this patch with a system which uses 0x4b63 as SATA controller. [1] https://sata-io.org/product/8803 [2] https://www.thomas-krenn.com/en/wiki/SATA_Link_Power_Management#Example_LES_v4 Signed-off-by: Werner Fischer <devlists@xxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- V1 -> V2: Added comment mentioning the additional IDs 4b60 and 4b62 added "ahci:" in summary phrase --- a/drivers/ata/ahci.c 2023-08-29 09:14:09.537450842 +0200 +++ b/drivers/ata/ahci.c 2023-08-29 11:22:50.779830526 +0200 @@ -421,6 +421,8 @@ { PCI_VDEVICE(INTEL, 0x34d3), board_ahci_low_power }, /* Ice Lake LP AHCI */ { PCI_VDEVICE(INTEL, 0x02d3), board_ahci_low_power }, /* Comet Lake PCH-U AHCI */ { PCI_VDEVICE(INTEL, 0x02d7), board_ahci_low_power }, /* Comet Lake PCH RAID */ + /* Elkhart Lake IDs 0x4b60 & 0x4b62 https://sata-io.org/product/8803 not tested yet */ + { PCI_VDEVICE(INTEL, 0x4b63), board_ahci_low_power }, /* Elkhart Lake AHCI */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
