Re: [PATCH] ata,scsi: do not issue START STOP UNIT on resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



	Hi Damien,

On Mon, 31 Jul 2023, Damien Le Moal wrote:
During system resume, ata_port_pm_resume() triggers ata EH to
1) Resume the controller
2) Reset and rescan the ports
3) Revalidate devices
This EH execution is started asynchronously from ata_port_pm_resume(),
which means that when sd_resume() is executed, none or only part of the
above processing may have been executed. However, sd_resume() issues a
START STOP UNIT to wake up the drive from sleep mode. This command is
translated to ATA with ata_scsi_start_stop_xlat() and issued to the
device. However, depending on the state of execution of the EH process
and revalidation triggerred by ata_port_pm_resume(), two things may
happen:
1) The START STOP UNIT fails if it is received before the controller has
  been reenabled at the beginning of the EH execution. This is visible
  with error messages like:

ata10.00: device reported invalid CHS sector 0
sd 9:0:0:0: [sdc] Start/Stop Unit failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
sd 9:0:0:0: [sdc] Sense Key : Illegal Request [current]
sd 9:0:0:0: [sdc] Add. Sense: Unaligned write command
sd 9:0:0:0: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x90 returns -5
sd 9:0:0:0: PM: failed to resume async: error -5

2) The START STOP UNIT command is received while the EH process is
  on-going, which mean that it is stopped and must wait for its
  completion, at which point the command is rather useless as the drive
  is already fully spun up already. This case results also in a
  significant delay in sd_resume() which is observable by users as
  the entire system resume completion is delayed.

Given that ATA devices will be woken up by libata activity on resume,
sd_resume() has no need to issue a START STOP UNIT command, which solves
the above mentioned problems. Do not issue this command by introducing
the new scsi_device flag no_start_on_resume and setting this flag to 1
in ata_scsi_dev_config(). sd_resume() is modified to issue a START STOP
UNIT command only if this flag is not set.

Reported-by: Paul Ausbeck <paula@xxxxxxxxxxxx>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215880
Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx>

Thanks for your patch, which is now commit 0a8589055936d8fe
("ata,scsi: do not issue START STOP UNIT on resume") in v6.5-rc5.
Sorry for being late to the party, but this commit landed upstream
during my summer holidays, and apparently I wasn't that focussed on
noticing small behavioral changes after getting back to work...

I noticed an oddity after s2idle or s2ram on Renesas Salvator-XS (R-Car
H3 ES2.0) with an old (spinning rust) SATA drive, and bisected it to
this commit: when accessing the drive after system resume, there is now
a delay of ca. 5s before data is returned, presumably due to starting
the drive, and having to wait for it to spin up to be able to read data.
But the good news is that the actual system resume takes less time than
before (reduced by even more than ca. 5s!), so this looks like a net
win...

I'm not sure this is to be called a regression, I just wanted you to be
aware of it.

Thanks!

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux