On 9/15/23 10:14, Damien Le Moal wrote:
If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver may
remove the scsi host, resulting in a call to sd_remove() for the
disks of the host. This in turn results in a call to sd_shutdown() which
will issue a synchronize cache command and a start stop unit command to
spindown the disk. sd_shutdown() issues the commands only if the device
is not already suspended but does not check the power state for
system-wide suspend/resume. That is, the commands may be issued with the
device in a suspended state, which causes PM resume to hang, forcing a
reset of the machine to recover.
Fix this by not calling sd_shutdown() in sd_remove() if the device
is not running.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
---
drivers/scsi/sd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 1d106c8ad5af..d86306d42445 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3727,7 +3727,8 @@ static int sd_remove(struct device *dev)
device_del(&sdkp->disk_dev);
del_gendisk(sdkp->disk);
- sd_shutdown(dev);
+ if (sdkp->device->sdev_state == SDEV_RUNNING)
+ sd_shutdown(dev);
put_disk(sdkp->disk);
return 0;
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@xxxxxxx +49 911 74053 688
SUSE Software Solutions Germany GmbH, Frankenstr. 146, 90461 Nürnberg
Managing Directors: I. Totev, A. Myers, A. McDonald, M. B. Moerman
(HRB 36809, AG Nürnberg)
