From: Niklas Cassel <niklas.cassel@xxxxxxx> For REPORT SUPPORTED OPERATION CODES command, the service action field is defined as bits 0-4 in the second byte in the CDB. Bits 5-7 in the second byte are reserved. Only look at the service action field in the second byte when determining if the MAINTENANCE IN opcode is a REPORT SUPPORTED OPERATION CODES command. This matches how we only look at the service action field in the second byte when determining if the SERVICE ACTION IN(16) opcode is a READ CAPACITY(16) command (reserved bits 5-7 in the second byte are ignored). Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxx> --- drivers/ata/libata-scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d3f28b82c97b..fb73c145b49a 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -4312,7 +4312,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd) break; case MAINTENANCE_IN: - if (scsicmd[1] == MI_REPORT_SUPPORTED_OPERATION_CODES) + if ((scsicmd[1] & 0x1f) == MI_REPORT_SUPPORTED_OPERATION_CODES) ata_scsi_rbuf_fill(&args, ata_scsiop_maint_in); else ata_scsi_set_invalid_field(dev, cmd, 1, 0xff); -- 2.41.0
