If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver may
remove the scsi host, resulting in a call to sd_remove() for the
disks of the host. However, since this function calls sd_shutdown(),
a synchronize cache command and a start stop unit may be issued with the
drive still sleeping and the HBA non-functional. This causes PM resume
to hang, forcing a reset of the machine to recover.
Fix this by checking a device host state in sd_shutdown() and by
returning early doing nothing if the host state is not SHOST_RUNNING.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/scsi/sd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index c92a317ba547..a415abb721d3 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3763,7 +3763,8 @@ static void sd_shutdown(struct device *dev)
if (!sdkp)
return; /* this can happen */
- if (pm_runtime_suspended(dev))
+ if (pm_runtime_suspended(dev) ||
+ sdkp->device->host->shost_state != SHOST_RUNNING)
return;
if (sdkp->WCE && sdkp->media_present) {
--
2.41.0
