On 2023/09/19 6:21, Niklas Cassel wrote:
> On Fri, Sep 15, 2023 at 05:14:46PM +0900, Damien Le Moal wrote:
>> Whenever an ATA adapter driver is removed (e.g. rmmod),
>> ata_port_detach() is called repeatedly for all the adapter ports to
>> remove (unload) the devices attached to the port and delete the port
>> device itself. Removing of devices is done using libata EH with the
>> ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute
>> ata_eh_unload() which disables all devices attached to the port.
>>
>> ata_port_detach() finishes by calling scsi_remove_host() to remove the
>> scsi host associated with the port. This function will trigger the
>> removal of all scsi devices attached to the host and in the case of
>> disks, calls to sd_shutdown() which will flush the device write cache
>> and stop the device. However, given that the devices were already
>> disabled by ata_eh_unload(), the synchronize write cache command and
>> start stop unit commands fail. E.g. running "rmmod ahci" with first
>> removing sd_mod results in error messages like:
>>
>> ata13.00: disable device
>> sd 0:0:0:0: [sda] Synchronizing SCSI cache
>> sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
>> sd 0:0:0:0: [sda] Stopping disk
>> sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
>>
>> Fix this by removing all scsi devices of the ata devices connected to
>> the port before scheduling libata EH to disable the ATA devices.
>>
>> Fixes: 720ba12620ee ("[PATCH] libata-hp: update unload-unplug")
>> Cc: stable@xxxxxxxxxxxxxxx
>> Signed-off-by: Damien Le Moal <dlemoal@xxxxxxxxxx>
>> Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
>> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@xxxxxxxxxxxxx>
>> ---
>> drivers/ata/libata-core.c | 21 ++++++++++++++++++++-
>> 1 file changed, 20 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
>> index c4898483d716..693cb3cd70cd 100644
>> --- a/drivers/ata/libata-core.c
>> +++ b/drivers/ata/libata-core.c
>> @@ -5952,11 +5952,30 @@ static void ata_port_detach(struct ata_port *ap)
>> struct ata_link *link;
>> struct ata_device *dev;
>>
>> - /* tell EH we're leaving & flush EH */
>> + /* Wait for any ongoing EH */
>> + ata_port_wait_eh(ap);
>> +
>> + mutex_lock(&ap->scsi_scan_mutex);
>> spin_lock_irqsave(ap->lock, flags);
>> +
>> + /* Remove scsi devices */
>> + ata_for_each_link(link, ap, HOST_FIRST) {
>> + ata_for_each_dev(dev, link, ALL) {
>> + if (dev->sdev) {
>> + spin_unlock_irqrestore(ap->lock, flags);
>> + scsi_remove_device(dev->sdev);
>> + spin_lock_irqsave(ap->lock, flags);
>> + dev->sdev = NULL;
>> + }
>> + }
>> + }
>> +
>> + /* Tell EH to disable all devices */
>> ap->pflags |= ATA_PFLAG_UNLOADING;
>> ata_port_schedule_eh(ap);
>> +
>> spin_unlock_irqrestore(ap->lock, flags);
>> + mutex_unlock(&ap->scsi_scan_mutex);
>>
>> /* wait till EH commits suicide */
>> ata_port_wait_eh(ap);
>> --
>> 2.41.0
>>
>
> Looks good:
> Reviewed-by: Niklas Cassel <niklas.cassel@xxxxxxx>
>
> Could you perhaps also fix the WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED));
> in this very same function.
>
> The pflag is checked without holding the lock.
It does not matter much at that point since EH is dead, or supposed to be, which
is what the WARN_ON() checks.
>
>
> Kind regards,
> Niklas
--
Damien Le Moal
Western Digital Research
