The compatible "at91rm9200-cf" is not used by any driver,hence remove the
corresponding documentation.
Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@xxxxxxxxxxxxx>
---
.../devicetree/bindings/ata/atmel-at91_cf.txt | 19 -------------------
1 file changed, 19 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
diff --git a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
deleted file mode 100644
index c1d22b3ae134..000000000000
--- a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Atmel AT91RM9200 CompactFlash
-
-Required properties:
-- compatible : "atmel,at91rm9200-cf".
-- reg : should specify localbus address and size used.
-- gpios : specifies the gpio pins to control the CF device. Detect
- and reset gpio's are mandatory while irq and vcc gpio's are
- optional and may be set to 0 if not present.
-
-Example:
-compact-flash@50000000 {
- compatible = "atmel,at91rm9200-cf";
- reg = <0x50000000 0x30000000>;
- gpios = <&pioC 13 0 /* irq */
- &pioC 15 0 /* detect */
- 0 /* vcc */
- &pioC 5 0 /* reset */
- >;
-};
--
2.34.1
