On 1/8/24 03:02, Phillip Susi wrote:
> In the event that more than one pass of EH is needed during system resume,
> only request the drive be started once ( if the first time worked ).
See my comment on patch 3/3. You need this only and only because of how you
handle PUIS state, forcing (an invalid) transition to sleep state.
> ---
> drivers/ata/libata-core.c | 9 +++++----
> drivers/ata/libata-eh.c | 8 +++-----
> drivers/ata/libata.h | 2 +-
> 3 files changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index 6c5269de4bf2..ef6a2349a6f8 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -2080,7 +2080,7 @@ static bool ata_dev_power_is_active(struct ata_device *dev)
> * LOCKING:
> * Kernel thread context (may sleep).
> */
> -void ata_dev_power_set_active(struct ata_device *dev)
> +unsigned int ata_dev_power_set_active(struct ata_device *dev)
> {
> struct ata_taskfile tf;
> unsigned int err_mask;
> @@ -2090,14 +2090,14 @@ void ata_dev_power_set_active(struct ata_device *dev)
> * if supported by the device.
> */
> if (!ata_dev_power_init_tf(dev, &tf, true))
> - return;
> + return AC_ERR_OK;
>
> /*
> * Check the device power state & condition and force a spinup with
> * VERIFY command only if the drive is not already ACTIVE or IDLE.
> */
> if (ata_dev_power_is_active(dev))
> - return;
> + return AC_ERR_OK;
>
> ata_dev_notice(dev, "Entering active power mode\n");
>
> @@ -2105,6 +2105,7 @@ void ata_dev_power_set_active(struct ata_device *dev)
> if (err_mask)
> ata_dev_err(dev, "VERIFY failed (err_mask=0x%x)\n",
> err_mask);
> + return err_mask;
> }
>
> /**
> @@ -5277,7 +5278,7 @@ static int ata_port_pm_poweroff(struct device *dev)
> static void ata_port_resume(struct ata_port *ap, pm_message_t mesg,
> bool async)
> {
> - ata_port_request_pm(ap, mesg, ATA_EH_RESET,
> + ata_port_request_pm(ap, mesg, ATA_EH_RESET | ATA_EH_SET_ACTIVE,
> ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET,
> async);
> }
> diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
> index b0d6e69c4a5b..799a1b8bc384 100644
> --- a/drivers/ata/libata-eh.c
> +++ b/drivers/ata/libata-eh.c
> @@ -710,10 +710,6 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
> ehc->saved_xfer_mode[devno] = dev->xfer_mode;
> if (ata_ncq_enabled(dev))
> ehc->saved_ncq_enabled |= 1 << devno;
> -
> - /* If we are resuming, wake up the device */
> - if (ap->pflags & ATA_PFLAG_RESUMING)
> - ehc->i.dev_action[devno] |= ATA_EH_SET_ACTIVE;
> }
> }
>
> @@ -3853,7 +3849,9 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
> */
> ata_for_each_dev(dev, link, ENABLED) {
> if (ehc->i.dev_action[dev->devno] & ATA_EH_SET_ACTIVE) {
> - ata_dev_power_set_active(dev);
> + unsigned int err_mask = ata_dev_power_set_active(dev);
> + if (err_mask)
> + link->eh_info.dev_action[dev->devno] |= ATA_EH_SET_ACTIVE;
> ata_eh_done(link, dev, ATA_EH_SET_ACTIVE);
> }
> }
> diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
> index 5c685bb1939e..43ad1ef9b63a 100644
> --- a/drivers/ata/libata.h
> +++ b/drivers/ata/libata.h
> @@ -65,7 +65,7 @@ extern int ata_dev_configure(struct ata_device *dev);
> extern bool ata_dev_power_init_tf(struct ata_device *dev,
> struct ata_taskfile *tf, bool set_active);
> extern void ata_dev_power_set_standby(struct ata_device *dev);
> -extern void ata_dev_power_set_active(struct ata_device *dev);
> +extern unsigned int ata_dev_power_set_active(struct ata_device *dev);
> extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
> extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
> extern unsigned int ata_dev_set_feature(struct ata_device *dev,
--
Damien Le Moal
Western Digital Research
