There is a duplication in the debug messages when accessing SCR registers.
Remove duplication to make the messages neat.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/ata/sata_dwc_460ex.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 44dca8c..2d73cdf 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -414,16 +414,16 @@ static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
}
*val = sata_dwc_readl(link->ap->ioaddr.scr_addr + (scr * 4));
- dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
- __func__, link->ap->print_id, scr, *val);
+ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
+ link->ap->print_id, scr, *val);
return 0;
}
static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
{
- dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
- __func__, link->ap->print_id, scr, val);
+ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
+ link->ap->print_id, scr, val);
if (scr > SCR_NOTIFICATION) {
dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
__func__, scr);
--
2.8.0.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
