IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.
The replacement driver (pata_atiixp) has been available since
2006 and it supports all the hardware supported by the old
atiixp host driver. Also x86 defconfigs have switched to use
libata PATA exclusively in 2008.
Remove the deprecated atiixp host driver.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
drivers/ide/Kconfig | 11 ---
drivers/ide/Makefile | 1 -
drivers/ide/atiixp.c | 211 ---------------------------------------------------
3 files changed, 223 deletions(-)
delete mode 100644 drivers/ide/atiixp.c
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 39ea67f..8c30be9 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -379,17 +379,6 @@ config BLK_DEV_AMD74XX
change PIO, DMA and UDMA speeds and to configure the chip to
optimum performance.
-config BLK_DEV_ATIIXP
- tristate "ATI IXP chipset IDE support"
- depends on X86
- select BLK_DEV_IDEDMA_PCI
- help
- This driver adds explicit support for ATI IXP chipset.
- This allows the kernel to change PIO, DMA and UDMA speeds
- and to configure the chip to optimum performance.
-
- Say Y here if you have an ATI IXP chipset IDE controller.
-
config BLK_DEV_CMD64X
tristate "CMD64{3|6|8|9} chipset support"
select IDE_TIMINGS
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 2a8c417..cabab02 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o
obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o
obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o
obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o
-obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o
obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o
obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o
obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c
deleted file mode 100644
index 76650e9..0000000
--- a/drivers/ide/atiixp.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Copyright (C) 2003 ATI Inc. <hyu@xxxxxxx>
- * Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "atiixp"
-
-#define ATIIXP_IDE_PIO_TIMING 0x40
-#define ATIIXP_IDE_MDMA_TIMING 0x44
-#define ATIIXP_IDE_PIO_CONTROL 0x48
-#define ATIIXP_IDE_PIO_MODE 0x4a
-#define ATIIXP_IDE_UDMA_CONTROL 0x54
-#define ATIIXP_IDE_UDMA_MODE 0x56
-
-struct atiixp_ide_timing {
- u8 command_width;
- u8 recover_width;
-};
-
-static struct atiixp_ide_timing pio_timing[] = {
- { 0x05, 0x0d },
- { 0x04, 0x07 },
- { 0x03, 0x04 },
- { 0x02, 0x02 },
- { 0x02, 0x00 },
-};
-
-static struct atiixp_ide_timing mdma_timing[] = {
- { 0x07, 0x07 },
- { 0x02, 0x01 },
- { 0x02, 0x00 },
-};
-
-static DEFINE_SPINLOCK(atiixp_lock);
-
-/**
- * atiixp_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * Set the interface PIO mode.
- */
-
-static void atiixp_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long flags;
- int timing_shift = (drive->dn ^ 1) * 8;
- u32 pio_timing_data;
- u16 pio_mode_data;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- spin_lock_irqsave(&atiixp_lock, flags);
-
- pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
- pio_mode_data &= ~(0x07 << (drive->dn * 4));
- pio_mode_data |= (pio << (drive->dn * 4));
- pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
-
- pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
- pio_timing_data &= ~(0xff << timing_shift);
- pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) |
- (pio_timing[pio].command_width << (timing_shift + 4));
- pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
-
- spin_unlock_irqrestore(&atiixp_lock, flags);
-}
-
-/**
- * atiixp_set_dma_mode - set host controller for DMA mode
- * @hwif: port
- * @drive: drive
- *
- * Set a ATIIXP host controller to the desired DMA mode. This involves
- * programming the right timing data into the PCI configuration space.
- */
-
-static void atiixp_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long flags;
- int timing_shift = (drive->dn ^ 1) * 8;
- u32 tmp32;
- u16 tmp16;
- u16 udma_ctl = 0;
- const u8 speed = drive->dma_mode;
-
- spin_lock_irqsave(&atiixp_lock, flags);
-
- pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &udma_ctl);
-
- if (speed >= XFER_UDMA_0) {
- pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16);
- tmp16 &= ~(0x07 << (drive->dn * 4));
- tmp16 |= ((speed & 0x07) << (drive->dn * 4));
- pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16);
-
- udma_ctl |= (1 << drive->dn);
- } else if (speed >= XFER_MW_DMA_0) {
- u8 i = speed & 0x03;
-
- pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32);
- tmp32 &= ~(0xff << timing_shift);
- tmp32 |= (mdma_timing[i].recover_width << timing_shift) |
- (mdma_timing[i].command_width << (timing_shift + 4));
- pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32);
-
- udma_ctl &= ~(1 << drive->dn);
- }
-
- pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, udma_ctl);
-
- spin_unlock_irqrestore(&atiixp_lock, flags);
-}
-
-static u8 atiixp_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- u8 udma_mode = 0, ch = hwif->channel;
-
- pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
-
- if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
- return ATA_CBL_PATA80;
- else
- return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops atiixp_port_ops = {
- .set_pio_mode = atiixp_set_pio_mode,
- .set_dma_mode = atiixp_set_dma_mode,
- .cable_detect = atiixp_cable_detect,
-};
-
-static const struct ide_port_info atiixp_pci_info[] = {
- { /* 0: IXP200/300/400/700 */
- .name = DRV_NAME,
- .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
- .port_ops = &atiixp_port_ops,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 1: IXP600 */
- .name = DRV_NAME,
- .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
- .port_ops = &atiixp_port_ops,
- .host_flags = IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
-};
-
-/**
- * atiixp_init_one - called when a ATIIXP is found
- * @dev: the atiixp device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &atiixp_pci_info[id->driver_data], NULL);
-}
-
-static const struct pci_device_id atiixp_pci_tbl[] = {
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), 0 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), 0 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
-
-static struct pci_driver atiixp_pci_driver = {
- .name = "ATIIXP_IDE",
- .id_table = atiixp_pci_tbl,
- .probe = atiixp_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init atiixp_ide_init(void)
-{
- return ide_pci_register_driver(&atiixp_pci_driver);
-}
-
-static void __exit atiixp_ide_exit(void)
-{
- pci_unregister_driver(&atiixp_pci_driver);
-}
-
-module_init(atiixp_ide_init);
-module_exit(atiixp_ide_exit);
-
-MODULE_AUTHOR("HUI YU");
-MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE");
-MODULE_LICENSE("GPL");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
