[CC devicetree@xxxxxxxxxxxxxxx]
On Tue, Mar 08, 2016 at 10:30:42AM +0900, Simon Horman wrote:
> Add fallback compatibility string for R-Car Gen 1, 2 and 3.
>
> In the case of Renesas R-Car hardware we know that there are generations of
> SoCs, e.g. Gen 1 and 2. But beyond that its not clear what the relationship
> between IP blocks might be. For example, I believe that r8a7779 is older
> than r8a7778 but that doesn't imply that the latter is a descendant of the
> former or vice versa.
>
> We can, however, by examining the documentation and behaviour of the
> hardware at run-time observe that the current driver implementation appears
> to be compatible with the IP blocks on SoCs within a given generation.
>
> For the above reasons and convenience when enabling new SoCs a
> per-generation fallback compatibility string scheme being adopted for
> drivers for Renesas SoCs.
>
> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
> ---
> Based on libata/for-next
> ---
> Documentation/devicetree/bindings/ata/sata_rcar.txt | 15 ++++++++++++---
> drivers/ata/sata_rcar.c | 12 ++++++++++++
> 2 files changed, 24 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
> index 0764f9ab63dc..b44048176938 100644
> --- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
> +++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
> @@ -1,14 +1,23 @@
> * Renesas R-Car SATA
>
> Required properties:
> -- compatible : should contain one of the following:
> +- compatible : should contain one or more of the following:
> - "renesas,sata-r8a7779" for R-Car H1
> - ("renesas,rcar-sata" is deprecated)
> - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
> - "renesas,sata-r8a7790" for R-Car H2 other than ES1
> - "renesas,sata-r8a7791" for R-Car M2-W
> - "renesas,sata-r8a7793" for R-Car M2-N
> - "renesas,sata-r8a7795" for R-Car H3
> + - "renesas,rcar-gen1-sata" for a generic R-Car Gen1 compatible device
> + - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device
> + - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device
> + - "renesas,rcar-sata" is deprecated
> +
> + When compatible with the generic version, nodes
> + must list the SoC-specific version corresponding
> + to the platform first followed by the generic
> + version.
> +
> - reg : address and length of the SATA registers;
> - interrupts : must consist of one interrupt specifier.
> - clocks : must contain a reference to the functional clock.
> @@ -16,7 +25,7 @@ Required properties:
> Example:
>
> sata0: sata@ee300000 {
> - compatible = "renesas,sata-r8a7791";
> + compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
> reg = <0 0xee300000 0 0x2000>;
> interrupt-parent = <&gic>;
> interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
> index f72d601e300a..09d4ba3f0bc4 100644
> --- a/drivers/ata/sata_rcar.c
> +++ b/drivers/ata/sata_rcar.c
> @@ -858,6 +858,18 @@ static struct of_device_id sata_rcar_match[] = {
> .compatible = "renesas,sata-r8a7795",
> .data = (void *)RCAR_GEN2_SATA
> },
> + {
> + .compatible = "renesas,rcar-gen1-sata",
> + .data = (void *)RCAR_GEN1_SATA
> + },
> + {
> + .compatible = "renesas,rcar-gen2-sata",
> + .data = (void *)RCAR_GEN2_SATA
> + },
> + {
> + .compatible = "renesas,rcar-gen3-sata",
> + .data = (void *)RCAR_GEN2_SATA
> + },
> { },
> };
> MODULE_DEVICE_TABLE(of, sata_rcar_match);
> --
> 2.1.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
