[RFC PATCH 15/19] ide: remove deprecated sis5513 host driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.

The replacement driver (pata_sis) has been available since
2006 and it supports all the hardware supported by the old
sis5513 host driver.  Also x86 defconfigs have switched to
use libata PATA exclusively in 2008.

Remove the deprecated sis5513 host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
 drivers/ide/Kconfig   |  17 --
 drivers/ide/Makefile  |   1 -
 drivers/ide/sis5513.c | 636 --------------------------------------------------
 3 files changed, 654 deletions(-)
 delete mode 100644 drivers/ide/sis5513.c

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 1379ce6..d086f52 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -444,23 +444,6 @@ config BLK_DEV_SIIMAGE
 	  This driver adds PIO/(U)DMA support for the SI CMD680 and SII
 	  3112 (Serial ATA) chips.
 
-config BLK_DEV_SIS5513
-	tristate "SiS5513 chipset support"
-	depends on X86
-	select BLK_DEV_IDEDMA_PCI
-	help
-	  This driver ensures (U)DMA support for SIS5513 chipset family based
-	  mainboards.
-
-	  The following chipsets are supported:
-	  ATA16:  SiS5511, SiS5513
-	  ATA33:  SiS5591, SiS5597, SiS5598, SiS5600
-	  ATA66:  SiS530, SiS540, SiS620, SiS630, SiS640
-	  ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
-	  SiS745, SiS750
-
-	  Please read the comments at the top of <file:drivers/ide/sis5513.c>.
-
 config BLK_DEV_SL82C105
 	tristate "Winbond SL82c105 support"
 	depends on (PPC || ARM)
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 9fe5f5f..3867f7d 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -46,7 +46,6 @@ obj-$(CONFIG_BLK_DEV_PDC202XX_NEW)	+= pdc202xx_new.o
 obj-$(CONFIG_BLK_DEV_PIIX)		+= piix.o
 obj-$(CONFIG_BLK_DEV_SGIIOC4)		+= sgiioc4.o
 obj-$(CONFIG_BLK_DEV_SIIMAGE)		+= siimage.o
-obj-$(CONFIG_BLK_DEV_SIS5513)		+= sis5513.o
 obj-$(CONFIG_BLK_DEV_SL82C105)		+= sl82c105.o
 obj-$(CONFIG_BLK_DEV_SLC90E66)		+= slc90e66.o
 obj-$(CONFIG_BLK_DEV_TC86C001)		+= tc86c001.o
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
deleted file mode 100644
index 247853e..0000000
--- a/drivers/ide/sis5513.c
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- * Copyright (C) 1999-2000	Andre Hedrick <andre@xxxxxxxxxxxxx>
- * Copyright (C) 2002		Lionel Bouton <Lionel.Bouton@xxxxxxxx>, Maintainer
- * Copyright (C) 2003		Vojtech Pavlik <vojtech@xxxxxxx>
- * Copyright (C) 2007-2009	Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- *
- * Thanks :
- *
- * SiS Taiwan		: for direct support and hardware.
- * Daniela Engert	: for initial ATA100 advices and numerous others.
- * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt	:
- *			  for checking code correctness, providing patches.
- *
- *
- * Original tests and design on the SiS620 chipset.
- * ATA100 tests and design on the SiS735 chipset.
- * ATA16/33 support from specs
- * ATA133 support for SiS961/962 by L.C. Chang <lcchang@xxxxxxxxxx>
- * ATA133 961/962/963 fixes by Vojtech Pavlik <vojtech@xxxxxxx>
- *
- * Documentation:
- *	SiS chipset documentation available under NDA to companies only
- *      (not to individuals).
- */
-
-/*
- * The original SiS5513 comes from a SiS5511/55112/5513 chipset. The original
- * SiS5513 was also used in the SiS5596/5513 chipset. Thus if we see a SiS5511
- * or SiS5596, we can assume we see the first MWDMA-16 capable SiS5513 chip.
- *
- * Later SiS chipsets integrated the 5513 functionality into the NorthBridge,
- * starting with SiS5571 and up to SiS745. The PCI ID didn't change, though. We
- * can figure out that we have a more modern and more capable 5513 by looking
- * for the respective NorthBridge IDs.
- *
- * Even later (96x family) SiS chipsets use the MuTIOL link and place the 5513
- * into the SouthBrige. Here we cannot rely on looking up the NorthBridge PCI
- * ID, while the now ATA-133 capable 5513 still has the same PCI ID.
- * Fortunately the 5513 can be 'unmasked' by fiddling with some config space
- * bits, changing its device id to the true one - 5517 for 961 and 5518 for
- * 962/963.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "sis5513"
-
-/* registers layout and init values are chipset family dependent */
-
-#define ATA_16		0x01
-#define ATA_33		0x02
-#define ATA_66		0x03
-#define ATA_100a	0x04 /* SiS730/SiS550 is ATA100 with ATA66 layout */
-#define ATA_100		0x05
-#define ATA_133a	0x06 /* SiS961b with 133 support */
-#define ATA_133		0x07 /* SiS962/963 */
-
-static u8 chipset_family;
-
-/*
- * Devices supported
- */
-static const struct {
-	const char *name;
-	u16 host_id;
-	u8 chipset_family;
-	u8 flags;
-} SiSHostChipInfo[] = {
-	{ "SiS968",	PCI_DEVICE_ID_SI_968,	ATA_133  },
-	{ "SiS966",	PCI_DEVICE_ID_SI_966,	ATA_133  },
-	{ "SiS965",	PCI_DEVICE_ID_SI_965,	ATA_133  },
-	{ "SiS745",	PCI_DEVICE_ID_SI_745,	ATA_100  },
-	{ "SiS735",	PCI_DEVICE_ID_SI_735,	ATA_100  },
-	{ "SiS733",	PCI_DEVICE_ID_SI_733,	ATA_100  },
-	{ "SiS635",	PCI_DEVICE_ID_SI_635,	ATA_100  },
-	{ "SiS633",	PCI_DEVICE_ID_SI_633,	ATA_100  },
-
-	{ "SiS730",	PCI_DEVICE_ID_SI_730,	ATA_100a },
-	{ "SiS550",	PCI_DEVICE_ID_SI_550,	ATA_100a },
-
-	{ "SiS640",	PCI_DEVICE_ID_SI_640,	ATA_66   },
-	{ "SiS630",	PCI_DEVICE_ID_SI_630,	ATA_66   },
-	{ "SiS620",	PCI_DEVICE_ID_SI_620,	ATA_66   },
-	{ "SiS540",	PCI_DEVICE_ID_SI_540,	ATA_66   },
-	{ "SiS530",	PCI_DEVICE_ID_SI_530,	ATA_66   },
-
-	{ "SiS5600",	PCI_DEVICE_ID_SI_5600,	ATA_33   },
-	{ "SiS5598",	PCI_DEVICE_ID_SI_5598,	ATA_33   },
-	{ "SiS5597",	PCI_DEVICE_ID_SI_5597,	ATA_33   },
-	{ "SiS5591/2",	PCI_DEVICE_ID_SI_5591,	ATA_33   },
-	{ "SiS5582",	PCI_DEVICE_ID_SI_5582,	ATA_33   },
-	{ "SiS5581",	PCI_DEVICE_ID_SI_5581,	ATA_33   },
-
-	{ "SiS5596",	PCI_DEVICE_ID_SI_5596,	ATA_16   },
-	{ "SiS5571",	PCI_DEVICE_ID_SI_5571,	ATA_16   },
-	{ "SiS5517",	PCI_DEVICE_ID_SI_5517,	ATA_16   },
-	{ "SiS551x",	PCI_DEVICE_ID_SI_5511,	ATA_16   },
-};
-
-/* Cycle time bits and values vary across chip dma capabilities
-   These three arrays hold the register layout and the values to set.
-   Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */
-
-/* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */
-static u8 cycle_time_offset[] = { 0, 0, 5, 4, 4, 0, 0 };
-static u8 cycle_time_range[]  = { 0, 0, 2, 3, 3, 4, 4 };
-static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
-	{  0,  0, 0, 0, 0, 0, 0 }, /* no UDMA */
-	{  0,  0, 0, 0, 0, 0, 0 }, /* no UDMA */
-	{  3,  2, 1, 0, 0, 0, 0 }, /* ATA_33 */
-	{  7,  5, 3, 2, 1, 0, 0 }, /* ATA_66 */
-	{  7,  5, 3, 2, 1, 0, 0 }, /* ATA_100a (730 specific),
-				      different cycle_time range and offset */
-	{ 11,  7, 5, 4, 2, 1, 0 }, /* ATA_100 */
-	{ 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133a (earliest 691 southbridges) */
-	{ 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133 */
-};
-/* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133
-   See SiS962 data sheet for more detail */
-static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
-	{ 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
-	{ 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
-	{ 2, 1, 1, 0, 0, 0, 0 },
-	{ 4, 3, 2, 1, 0, 0, 0 },
-	{ 4, 3, 2, 1, 0, 0, 0 },
-	{ 6, 4, 3, 1, 1, 1, 0 },
-	{ 9, 6, 4, 2, 2, 2, 2 },
-	{ 9, 6, 4, 2, 2, 2, 2 },
-};
-/* Initialize time, Active time, Recovery time vary across
-   IDE clock settings. These 3 arrays hold the register value
-   for PIO0/1/2/3/4 and DMA0/1/2 mode in order */
-static u8 ini_time_value[][8] = {
-	{ 0, 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0, 0 },
-	{ 2, 1, 0, 0, 0, 1, 0, 0 },
-	{ 4, 3, 1, 1, 1, 3, 1, 1 },
-	{ 4, 3, 1, 1, 1, 3, 1, 1 },
-	{ 6, 4, 2, 2, 2, 4, 2, 2 },
-	{ 9, 6, 3, 3, 3, 6, 3, 3 },
-	{ 9, 6, 3, 3, 3, 6, 3, 3 },
-};
-static u8 act_time_value[][8] = {
-	{  0,  0,  0,  0, 0,  0,  0, 0 },
-	{  0,  0,  0,  0, 0,  0,  0, 0 },
-	{  9,  9,  9,  2, 2,  7,  2, 2 },
-	{ 19, 19, 19,  5, 4, 14,  5, 4 },
-	{ 19, 19, 19,  5, 4, 14,  5, 4 },
-	{ 28, 28, 28,  7, 6, 21,  7, 6 },
-	{ 38, 38, 38, 10, 9, 28, 10, 9 },
-	{ 38, 38, 38, 10, 9, 28, 10, 9 },
-};
-static u8 rco_time_value[][8] = {
-	{  0,  0, 0,  0, 0,  0,  0, 0 },
-	{  0,  0, 0,  0, 0,  0,  0, 0 },
-	{  9,  2, 0,  2, 0,  7,  1, 1 },
-	{ 19,  5, 1,  5, 2, 16,  3, 2 },
-	{ 19,  5, 1,  5, 2, 16,  3, 2 },
-	{ 30,  9, 3,  9, 4, 25,  6, 4 },
-	{ 40, 12, 4, 12, 5, 34, 12, 5 },
-	{ 40, 12, 4, 12, 5, 34, 12, 5 },
-};
-
-/*
- * Printing configuration
- */
-/* Used for chipset type printing at boot time */
-static char *chipset_capability[] = {
-	"ATA", "ATA 16",
-	"ATA 33", "ATA 66",
-	"ATA 100 (1st gen)", "ATA 100 (2nd gen)",
-	"ATA 133 (1st gen)", "ATA 133 (2nd gen)"
-};
-
-/*
- * Configuration functions
- */
-
-static u8 sis_ata133_get_base(ide_drive_t *drive)
-{
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-	u32 reg54 = 0;
-
-	pci_read_config_dword(dev, 0x54, &reg54);
-
-	return ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4;
-}
-
-static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
-{
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-	u16 t1 = 0;
-	u8 drive_pci = 0x40 + drive->dn * 2;
-
-	const u16 pio_timings[]   = { 0x000, 0x607, 0x404, 0x303, 0x301 };
-	const u16 mwdma_timings[] = { 0x008, 0x302, 0x301 };
-
-	pci_read_config_word(dev, drive_pci, &t1);
-
-	/* clear active/recovery timings */
-	t1 &= ~0x070f;
-	if (mode >= XFER_MW_DMA_0) {
-		if (chipset_family > ATA_16)
-			t1 &= ~0x8000;	/* disable UDMA */
-		t1 |= mwdma_timings[mode - XFER_MW_DMA_0];
-	} else
-		t1 |= pio_timings[mode - XFER_PIO_0];
-
-	pci_write_config_word(dev, drive_pci, t1);
-}
-
-static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
-{
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-	u8 t1, drive_pci = 0x40 + drive->dn * 2;
-
-	/* timing bits: 7:4 active 3:0 recovery */
-	const u8 pio_timings[]   = { 0x00, 0x67, 0x44, 0x33, 0x31 };
-	const u8 mwdma_timings[] = { 0x08, 0x32, 0x31 };
-
-	if (mode >= XFER_MW_DMA_0) {
-		u8 t2 = 0;
-
-		pci_read_config_byte(dev, drive_pci, &t2);
-		t2 &= ~0x80;	/* disable UDMA */
-		pci_write_config_byte(dev, drive_pci, t2);
-
-		t1 = mwdma_timings[mode - XFER_MW_DMA_0];
-	} else
-		t1 = pio_timings[mode - XFER_PIO_0];
-
-	pci_write_config_byte(dev, drive_pci + 1, t1);
-}
-
-static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode)
-{
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-	u32 t1 = 0;
-	u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
-
-	pci_read_config_dword(dev, drive_pci, &t1);
-
-	t1 &= 0xc0c00fff;
-	clk = (t1 & 0x08) ? ATA_133 : ATA_100;
-	if (mode >= XFER_MW_DMA_0) {
-		t1 &= ~0x04;	/* disable UDMA */
-		idx = mode - XFER_MW_DMA_0 + 5;
-	} else
-		idx = mode - XFER_PIO_0;
-	t1 |= ini_time_value[clk][idx] << 12;
-	t1 |= act_time_value[clk][idx] << 16;
-	t1 |= rco_time_value[clk][idx] << 24;
-
-	pci_write_config_dword(dev, drive_pci, t1);
-}
-
-static void sis_program_timings(ide_drive_t *drive, const u8 mode)
-{
-	if (chipset_family < ATA_100)		/* ATA_16/33/66/100a */
-		sis_ata16_program_timings(drive, mode);
-	else if (chipset_family < ATA_133)	/* ATA_100/133a */
-		sis_ata100_program_timings(drive, mode);
-	else					/* ATA_133 */
-		sis_ata133_program_timings(drive, mode);
-}
-
-static void config_drive_art_rwp(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif	= drive->hwif;
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	u8 reg4bh		= 0;
-	u8 rw_prefetch		= 0;
-
-	pci_read_config_byte(dev, 0x4b, &reg4bh);
-
-	rw_prefetch = reg4bh & ~(0x11 << drive->dn);
-
-	if (drive->media == ide_disk)
-		rw_prefetch |= 0x11 << drive->dn;
-
-	if (reg4bh != rw_prefetch)
-		pci_write_config_byte(dev, 0x4b, rw_prefetch);
-}
-
-static void sis_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	config_drive_art_rwp(drive);
-	sis_program_timings(drive, drive->pio_mode);
-}
-
-static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
-{
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-	u32 regdw = 0;
-	u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
-
-	pci_read_config_dword(dev, drive_pci, &regdw);
-
-	regdw |= 0x04;
-	regdw &= 0xfffff00f;
-	/* check if ATA133 enable */
-	clk = (regdw & 0x08) ? ATA_133 : ATA_100;
-	idx = mode - XFER_UDMA_0;
-	regdw |= cycle_time_value[clk][idx] << 4;
-	regdw |= cvs_time_value[clk][idx] << 8;
-
-	pci_write_config_dword(dev, drive_pci, regdw);
-}
-
-static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode)
-{
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-	u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family;
-
-	pci_read_config_byte(dev, drive_pci + 1, &reg);
-
-	/* force the UDMA bit on if we want to use UDMA */
-	reg |= 0x80;
-	/* clean reg cycle time bits */
-	reg &= ~((0xff >> (8 - cycle_time_range[i])) << cycle_time_offset[i]);
-	/* set reg cycle time bits */
-	reg |= cycle_time_value[i][mode - XFER_UDMA_0] << cycle_time_offset[i];
-
-	pci_write_config_byte(dev, drive_pci + 1, reg);
-}
-
-static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
-{
-	if (chipset_family >= ATA_133)	/* ATA_133 */
-		sis_ata133_program_udma_timings(drive, mode);
-	else				/* ATA_33/66/100a/100/133a */
-		sis_ata33_program_udma_timings(drive, mode);
-}
-
-static void sis_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	const u8 speed = drive->dma_mode;
-
-	if (speed >= XFER_UDMA_0)
-		sis_program_udma_timings(drive, speed);
-	else
-		sis_program_timings(drive, speed);
-}
-
-static u8 sis_ata133_udma_filter(ide_drive_t *drive)
-{
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-	u32 regdw = 0;
-	u8 drive_pci = sis_ata133_get_base(drive);
-
-	pci_read_config_dword(dev, drive_pci, &regdw);
-
-	/* if ATA133 disable, we should not set speed above UDMA5 */
-	return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
-}
-
-static int sis_find_family(struct pci_dev *dev)
-{
-	struct pci_dev *host;
-	int i = 0;
-
-	chipset_family = 0;
-
-	for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !chipset_family; i++) {
-
-		host = pci_get_device(PCI_VENDOR_ID_SI, SiSHostChipInfo[i].host_id, NULL);
-
-		if (!host)
-			continue;
-
-		chipset_family = SiSHostChipInfo[i].chipset_family;
-
-		/* Special case for SiS630 : 630S/ET is ATA_100a */
-		if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
-			if (host->revision >= 0x30)
-				chipset_family = ATA_100a;
-		}
-		pci_dev_put(host);
-
-		printk(KERN_INFO DRV_NAME " %s: %s %s controller\n",
-			pci_name(dev), SiSHostChipInfo[i].name,
-			chipset_capability[chipset_family]);
-	}
-
-	if (!chipset_family) { /* Belongs to pci-quirks */
-
-			u32 idemisc;
-			u16 trueid;
-
-			/* Disable ID masking and register remapping */
-			pci_read_config_dword(dev, 0x54, &idemisc);
-			pci_write_config_dword(dev, 0x54, (idemisc & 0x7fffffff));
-			pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
-			pci_write_config_dword(dev, 0x54, idemisc);
-
-			if (trueid == 0x5518) {
-				printk(KERN_INFO DRV_NAME " %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n",
-					pci_name(dev));
-				chipset_family = ATA_133;
-
-				/* Check for 5513 compatibility mapping
-				 * We must use this, else the port enabled code will fail,
-				 * as it expects the enablebits at 0x4a.
-				 */
-				if ((idemisc & 0x40000000) == 0) {
-					pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
-					printk(KERN_INFO DRV_NAME " %s: Switching to 5513 register mapping\n",
-						pci_name(dev));
-				}
-			}
-	}
-
-	if (!chipset_family) { /* Belongs to pci-quirks */
-
-			struct pci_dev *lpc_bridge;
-			u16 trueid;
-			u8 prefctl;
-			u8 idecfg;
-
-			pci_read_config_byte(dev, 0x4a, &idecfg);
-			pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
-			pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
-			pci_write_config_byte(dev, 0x4a, idecfg);
-
-			if (trueid == 0x5517) { /* SiS 961/961B */
-
-				lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */
-				pci_read_config_byte(dev, 0x49, &prefctl);
-				pci_dev_put(lpc_bridge);
-
-				if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
-					printk(KERN_INFO DRV_NAME " %s: SiS 961B MuTIOL IDE UDMA133 controller\n",
-						pci_name(dev));
-					chipset_family = ATA_133a;
-				} else {
-					printk(KERN_INFO DRV_NAME " %s: SiS 961 MuTIOL IDE UDMA100 controller\n",
-						pci_name(dev));
-					chipset_family = ATA_100;
-				}
-			}
-	}
-
-	return chipset_family;
-}
-
-static int init_chipset_sis5513(struct pci_dev *dev)
-{
-	/* Make general config ops here
-	   1/ tell IDE channels to operate in Compatibility mode only
-	   2/ tell old chips to allow per drive IDE timings */
-
-	u8 reg;
-	u16 regw;
-
-	switch (chipset_family) {
-	case ATA_133:
-		/* SiS962 operation mode */
-		pci_read_config_word(dev, 0x50, &regw);
-		if (regw & 0x08)
-			pci_write_config_word(dev, 0x50, regw&0xfff7);
-		pci_read_config_word(dev, 0x52, &regw);
-		if (regw & 0x08)
-			pci_write_config_word(dev, 0x52, regw&0xfff7);
-		break;
-	case ATA_133a:
-	case ATA_100:
-		/* Fixup latency */
-		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
-		/* Set compatibility bit */
-		pci_read_config_byte(dev, 0x49, &reg);
-		if (!(reg & 0x01))
-			pci_write_config_byte(dev, 0x49, reg|0x01);
-		break;
-	case ATA_100a:
-	case ATA_66:
-		/* Fixup latency */
-		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10);
-
-		/* On ATA_66 chips the bit was elsewhere */
-		pci_read_config_byte(dev, 0x52, &reg);
-		if (!(reg & 0x04))
-			pci_write_config_byte(dev, 0x52, reg|0x04);
-		break;
-	case ATA_33:
-		/* On ATA_33 we didn't have a single bit to set */
-		pci_read_config_byte(dev, 0x09, &reg);
-		if ((reg & 0x0f) != 0x00)
-			pci_write_config_byte(dev, 0x09, reg&0xf0);
-	case ATA_16:
-		/* force per drive recovery and active timings
-		   needed on ATA_33 and below chips */
-		pci_read_config_byte(dev, 0x52, &reg);
-		if (!(reg & 0x08))
-			pci_write_config_byte(dev, 0x52, reg|0x08);
-		break;
-	}
-
-	return 0;
-}
-
-struct sis_laptop {
-	u16 device;
-	u16 subvendor;
-	u16 subdevice;
-};
-
-static const struct sis_laptop sis_laptop[] = {
-	/* devid, subvendor, subdev */
-	{ 0x5513, 0x1043, 0x1107 },	/* ASUS A6K */
-	{ 0x5513, 0x1734, 0x105f },	/* FSC Amilo A1630 */
-	{ 0x5513, 0x1071, 0x8640 },     /* EasyNote K5305 */
-	/* end marker */
-	{ 0, }
-};
-
-static u8 sis_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	const struct sis_laptop *lap = &sis_laptop[0];
-	u8 ata66 = 0;
-
-	while (lap->device) {
-		if (lap->device == pdev->device &&
-		    lap->subvendor == pdev->subsystem_vendor &&
-		    lap->subdevice == pdev->subsystem_device)
-			return ATA_CBL_PATA40_SHORT;
-		lap++;
-	}
-
-	if (chipset_family >= ATA_133) {
-		u16 regw = 0;
-		u16 reg_addr = hwif->channel ? 0x52: 0x50;
-		pci_read_config_word(pdev, reg_addr, &regw);
-		ata66 = (regw & 0x8000) ? 0 : 1;
-	} else if (chipset_family >= ATA_66) {
-		u8 reg48h = 0;
-		u8 mask = hwif->channel ? 0x20 : 0x10;
-		pci_read_config_byte(pdev, 0x48, &reg48h);
-		ata66 = (reg48h & mask) ? 0 : 1;
-	}
-
-	return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops sis_port_ops = {
-	.set_pio_mode		= sis_set_pio_mode,
-	.set_dma_mode		= sis_set_dma_mode,
-	.cable_detect		= sis_cable_detect,
-};
-
-static const struct ide_port_ops sis_ata133_port_ops = {
-	.set_pio_mode		= sis_set_pio_mode,
-	.set_dma_mode		= sis_set_dma_mode,
-	.udma_filter		= sis_ata133_udma_filter,
-	.cable_detect		= sis_cable_detect,
-};
-
-static const struct ide_port_info sis5513_chipset = {
-	.name		= DRV_NAME,
-	.init_chipset	= init_chipset_sis5513,
-	.enablebits	= { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} },
-	.host_flags	= IDE_HFLAG_NO_AUTODMA,
-	.pio_mask	= ATA_PIO4,
-	.mwdma_mask	= ATA_MWDMA2,
-};
-
-static int sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	struct ide_port_info d = sis5513_chipset;
-	u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
-	int rc;
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		return rc;
-
-	if (sis_find_family(dev) == 0)
-		return -ENOTSUPP;
-
-	if (chipset_family >= ATA_133)
-		d.port_ops = &sis_ata133_port_ops;
-	else
-		d.port_ops = &sis_port_ops;
-
-	d.udma_mask = udma_rates[chipset_family];
-
-	return ide_pci_init_one(dev, &d, NULL);
-}
-
-static void sis5513_remove(struct pci_dev *dev)
-{
-	ide_pci_remove(dev);
-	pci_disable_device(dev);
-}
-
-static const struct pci_device_id sis5513_pci_tbl[] = {
-	{ PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5513), 0 },
-	{ PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5518), 0 },
-	{ PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_1180), 0 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);
-
-static struct pci_driver sis5513_pci_driver = {
-	.name		= "SIS_IDE",
-	.id_table	= sis5513_pci_tbl,
-	.probe		= sis5513_init_one,
-	.remove		= sis5513_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init sis5513_ide_init(void)
-{
-	return ide_pci_register_driver(&sis5513_pci_driver);
-}
-
-static void __exit sis5513_ide_exit(void)
-{
-	pci_unregister_driver(&sis5513_pci_driver);
-}
-
-module_init(sis5513_ide_init);
-module_exit(sis5513_ide_exit);
-
-MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
-MODULE_DESCRIPTION("PCI driver module for SIS IDE");
-MODULE_LICENSE("GPL");
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux