Re: [PATCH 1/2] ARM: dts: r8a7793: Add SATA controller node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 16, 2016 at 06:11:07PM +0100, Ulrich Hecht wrote:
> Adds SATA device node to r8a7793.dtsi.
> 
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/r8a7793.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
> index 3ebe7d4..abb6851 100644
> --- a/arch/arm/boot/dts/r8a7793.dtsi
> +++ b/arch/arm/boot/dts/r8a7793.dtsi
> @@ -775,6 +775,22 @@
>  		status = "disabled";
>  	};
>  
> +	sata0: sata@ee300000 {
> +		compatible = "renesas,sata-r8a7793";
> +		reg = <0 0xee300000 0 0x2000>;
> +		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp8_clks R8A7793_CLK_SATA0>;

I think you also need a power domains property:

		power-domains = <&cpg_clocks>;

> +		status = "disabled";
> +	};
> +
> +	sata1: sata@ee500000 {
> +		compatible = "renesas,sata-r8a7793";
> +		reg = <0 0xee500000 0 0x2000>;
> +		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp8_clks R8A7793_CLK_SATA1>;

Here too.

> +		status = "disabled";
> +	};
> +
>  	qspi: spi@e6b10000 {
>  		compatible = "renesas,qspi-r8a7793", "renesas,qspi";
>  		reg = <0 0xe6b10000 0 0x2c>;
> -- 
> 2.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux