Hello, Carolin. On Thu, Feb 25, 2016 at 10:45:10PM +0100, Carolin Latze wrote: ... > Since the beginning (started with 3.19.x kernels on this notebook) I had > problems with this sata controller: > > 03:00.0 SATA controller: Lite-On Technology Corporation Device 0224 (rev 10) > > Very often during boot, the boot just failed with error messages like > > ata1.00: exception... (I was only able to capture them by taking a picture: > https://launchpadlibrarian.net/227876135/IMG_20151128_230313.jpg) > > Then I keep trying, sometimes I boot into Windows inbetween, and eventually, > the kernel comes up. > > Then, when running and putting a lot of load on the disk (e.g. running dump > or a simple update via apt-get upgrade), the system looses its disk and I > have to hard reset. > > The machine runs perfectly fine under Windows, so I don't believe it is a > hardware issue. > > I hope there is a solution to this issue. Can you please boot with libata.force=noncq and if that fails post the kernel messages of the failure? Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html