On 30/03/16 19:57, Tejun Heo wrote:
Hello,
On Tue, Mar 29, 2016 at 02:11:13PM +0100, Srinivas Kandagatla wrote:
In usecases where force_port_map is used saved_port_map is never set,
resulting in not programming the PORTS_IMPL register as part of intial
config. This patch fixes this by setting it to port_map even in case
where force_port_map is used, making it more inline with other parts of
the code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
drivers/ata/libahci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 3982054..a5d7c1c 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -507,6 +507,7 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv)
dev_info(dev, "forcing port_map 0x%x -> 0x%x\n",
port_map, hpriv->force_port_map);
port_map = hpriv->force_port_map;
+ hpriv->saved_port_map = port_map;
So, the only change it'd cause is making the driver write the forced
value to the PI register. Does that make sense?
Yes, that is the intention, I guess, This was done exactly in case where
the port number was fabricated too.
Without this I could not get the sata working on my board with forced
port map option.
--srini
Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html