[PATCH 02/12] ata-scsi: Translate ReportZones result to big endian

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Translate T13 (little endian) output to match T10 (big endian).

In the common case SATA drives connected via AHCI controllers libata
translates commands from T10 to T13. On reply the converse should
also be performed. If the originating command was translate from T10
to T13 the result should be translated from T13 to T10 format.

Add this T13->T10 translation on the result from Report Zones.

Code originially from: Hannes Reinecke <hare@xxxxxxx> with minor
changes.

http://kernel.opensuse.org/cgit/kernel-source/commit/?id=6e219225108bf49c59aa69d14f3cbc74708777ae

Signed-off-by: Shaun Tancheff <shaun.tancheff@xxxxxxxxxxx>
---
 drivers/ata/libata-eh.c       |   2 +
 drivers/ata/libata-scsi.c     | 229 +++++++++++++++++++++++++++---------------
 include/trace/events/libata.h |   2 +
 3 files changed, 154 insertions(+), 79 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 961acc7..c217471 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2398,6 +2398,8 @@ const char *ata_get_cmd_descript(u8 command)
 		{ ATA_CMD_CFA_WRITE_MULT_NE,	"CFA WRITE MULTIPLE WITHOUT ERASE" },
 		{ ATA_CMD_REQ_SENSE_DATA,	"REQUEST SENSE DATA EXT" },
 		{ ATA_CMD_SANITIZE_DEVICE,	"SANITIZE DEVICE" },
+		{ ATA_CMD_ZONE_MAN_IN,		"ZAC MANAGEMENT IN" },
+		{ ATA_CMD_ZONE_MAN_OUT,		"ZAC MANAGEMENT OUT" },
 		{ ATA_CMD_READ_LONG,		"READ LONG (with retries)" },
 		{ ATA_CMD_READ_LONG_ONCE,	"READ LONG (without retries)" },
 		{ ATA_CMD_WRITE_LONG,		"WRITE LONG (with retries)" },
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a7c5ec8..ea454c4 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1518,85 +1518,6 @@ static unsigned int ata_scsi_zone_command_xlat(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_scsi_report_zones_xlat - Translate SCSI Report Zones command
- *	@qc: Storage for translated ATA taskfile
- *
- *	Sets up an ATA taskfile to issue Report Zones Ext command.
- *	May need change when zac specs is updated.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	Zero on success, non-zero on error.
- */
-static unsigned int ata_scsi_report_zones_xlat(struct ata_queued_cmd *qc)
-{
-	struct ata_device *dev = qc->dev;
-	struct scsi_cmnd *scmd = qc->scsicmd;
-	struct ata_taskfile *tf = &qc->tf;
-	const u8 *cdb = scmd->cmnd;
-	u64 max_lba = dev->n_sectors;     /* Maximal LBA supported */
-	u64 slba;       /* Start LBA in scsi command */
-	u32 alloc_len;  /* Alloc length (in bytes) */
-	u8 reporting_option;
-
-	if (scmd->cmd_len < 16) {
-		ata_dev_err(dev, "ZAC Error: Command length is less than 16\n");
-		goto invalid_fld;
-	}
-	if (unlikely(!dev->dma_mode)) {
-		ata_dev_err(dev, "ZAC Error: No DMA mode is set\n");
-		goto invalid_fld;
-	}
-	if (!scsi_sg_count(scmd)) {
-		ata_dev_err(dev, "ZAC Error: SCSI sg count is zero\n");
-		goto invalid_fld;
-	}
-	scsi_16_lba_len(cdb, &slba, &alloc_len);
-	if (slba > max_lba) {
-		ata_dev_err(dev, "Zone start LBA %llu > %llu (Max LBA)\n",
-			    slba, max_lba);
-		goto out_of_range;
-	}
-
-	reporting_option = cdb[14] & 0x3f;
-
-	tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | ATA_TFLAG_ISADDR;
-	tf->protocol = ATA_PROT_DMA;
-
-	tf->command = ATA_CMD_ZONE_MAN_IN;
-
-	tf->hob_lbah = (slba >> 40) & 0xff;
-	tf->hob_lbam = (slba >> 32) & 0xff;
-	tf->hob_lbal = (slba >> 24) & 0xff;
-	tf->lbah = (slba >> 16) & 0xff;
-	tf->lbam = (slba >> 8) & 0xff;
-	tf->lbal = slba & 0xff;
-
-	tf->feature = 0x00;
-	tf->hob_feature = reporting_option;
-
-	alloc_len    /= 512; /* bytes in scsi, blocks in ata */
-	tf->nsect     = alloc_len & 0xff;
-	tf->hob_nsect = alloc_len >> 8;
-
-	ata_qc_set_pc_nbytes(qc);
-
-	return 0;
-
- invalid_fld:
-	ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
-	/* "Invalid field in cbd" */
-	return 1;
- out_of_range:
-	ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
-	/* LBA out of range */
-	return 1;
-}
-
-
-/**
  *	scsi_6_lba_len - Get LBA and transfer length
  *	@cdb: SCSI command to translate
  *
@@ -1950,6 +1871,156 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
 	ata_qc_done(qc);
 }
 
+/*
+ * ata_scsi_report_zones_complete
+ *
+ * Convert T-13 little-endian field representation into
+ * T-10 big-endian field representation.
+ */
+static void ata_scsi_report_zones_complete(struct ata_queued_cmd *qc)
+{
+	struct scsi_cmnd *scmd = qc->scsicmd;
+	struct sg_mapping_iter miter;
+	unsigned long flags;
+	unsigned int bytes = 0;
+
+	sg_miter_start(&miter, scsi_sglist(scmd), scsi_sg_count(scmd),
+		       SG_MITER_TO_SG | SG_MITER_ATOMIC);
+
+	local_irq_save(flags);
+	while (sg_miter_next(&miter)) {
+		unsigned int offset = 0;
+
+		if (bytes == 0) {
+			char *hdr;
+			u32 list_length;
+			u64 max_lba, opt_lba;
+			u16 same;
+
+			/* Swizzle header */
+			hdr = miter.addr;
+			list_length = get_unaligned_le32(&hdr[0]);
+			same = get_unaligned_le16(&hdr[4]);
+			max_lba = get_unaligned_le64(&hdr[8]);
+			opt_lba = get_unaligned_le64(&hdr[16]);
+			put_unaligned_be32(list_length, &hdr[0]);
+			hdr[4] = same & 0xf;
+			put_unaligned_be64(max_lba, &hdr[8]);
+			put_unaligned_be64(opt_lba, &hdr[16]);
+			offset += 64;
+			bytes += 64;
+		}
+		while (offset < miter.length) {
+			char *rec;
+			u16 option;
+			u8 cond, type, reset;
+			u64 size, start, wp, checkpoint;
+
+			/* Swizzle zone descriptor */
+			rec = miter.addr + offset;
+			option = get_unaligned_le16(&rec[0]);
+			cond = (option >> 4) & 0xf;
+			type = (option >> 8) & 0xf;
+			reset = (option & 1);
+			size = get_unaligned_le64(&rec[8]);
+			start = get_unaligned_le64(&rec[16]);
+			wp = get_unaligned_le64(&rec[24]);
+			checkpoint = get_unaligned_le64(&rec[32]);
+			put_unaligned_be64(size, &rec[8]);
+			put_unaligned_be64(start, &rec[16]);
+			put_unaligned_be64(wp, &rec[24]);
+			put_unaligned_be64(checkpoint, &rec[32]);
+			WARN_ON(offset + 64 > miter.length);
+			offset += 64;
+			bytes += 64;
+		}
+	}
+	sg_miter_stop(&miter);
+	local_irq_restore(flags);
+
+	ata_scsi_qc_complete(qc);
+}
+
+/**
+ *	ata_scsi_report_zones_xlat - Translate SCSI Report Zones command
+ *	@qc: Storage for translated ATA taskfile
+ *
+ *	Sets up an ATA taskfile to issue Report Zones Ext command.
+ *	May need change when zac specs is updated.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	Zero on success, non-zero on error.
+ */
+static unsigned int ata_scsi_report_zones_xlat(struct ata_queued_cmd *qc)
+{
+	struct ata_device *dev = qc->dev;
+	struct scsi_cmnd *scmd = qc->scsicmd;
+	struct ata_taskfile *tf = &qc->tf;
+	const u8 *cdb = scmd->cmnd;
+	u64 max_lba = dev->n_sectors;     /* Maximal LBA supported */
+	u64 slba;       /* Start LBA in scsi command */
+	u32 alloc_len;  /* Alloc length (in bytes) */
+	u8 reporting_option;
+
+	if (scmd->cmd_len < 16) {
+		ata_dev_err(dev, "ZAC Error: Command length is less than 16\n");
+		goto invalid_fld;
+	}
+	if (unlikely(!dev->dma_mode)) {
+		ata_dev_err(dev, "ZAC Error: No DMA mode is set\n");
+		goto invalid_fld;
+	}
+	if (!scsi_sg_count(scmd)) {
+		ata_dev_err(dev, "ZAC Error: SCSI sg count is zero\n");
+		goto invalid_fld;
+	}
+	scsi_16_lba_len(cdb, &slba, &alloc_len);
+	if (slba > max_lba) {
+		ata_dev_err(dev, "Zone start LBA %llu > %llu (Max LBA)\n",
+			    slba, max_lba);
+		goto out_of_range;
+	}
+
+	reporting_option = cdb[14] & 0x3f;
+
+	tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | ATA_TFLAG_ISADDR;
+	tf->protocol = ATA_PROT_DMA;
+
+	tf->command = ATA_CMD_ZONE_MAN_IN;
+
+	tf->hob_lbah = (slba >> 40) & 0xff;
+	tf->hob_lbam = (slba >> 32) & 0xff;
+	tf->hob_lbal = (slba >> 24) & 0xff;
+	tf->lbah = (slba >> 16) & 0xff;
+	tf->lbam = (slba >> 8) & 0xff;
+	tf->lbal = slba & 0xff;
+
+	tf->feature = 0x00;
+	tf->hob_feature = reporting_option;
+
+	alloc_len    /= 512; /* bytes in scsi, blocks in ata */
+	tf->nsect     = alloc_len & 0xff;
+	tf->hob_nsect = alloc_len >> 8;
+
+	ata_qc_set_pc_nbytes(qc);
+
+	qc->complete_fn = ata_scsi_report_zones_complete;
+
+	return 0;
+
+ invalid_fld:
+	ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
+	/* "Invalid field in cbd" */
+	return 1;
+ out_of_range:
+	ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x21, 0x0);
+	/* LBA out of range */
+	return 1;
+}
+
 /**
  *	ata_scsi_translate - Translate then issue SCSI command to ATA device
  *	@dev: ATA device to which the command is addressed
diff --git a/include/trace/events/libata.h b/include/trace/events/libata.h
index 8b0fbd9..157ca7b 100644
--- a/include/trace/events/libata.h
+++ b/include/trace/events/libata.h
@@ -97,6 +97,8 @@
 		 ata_opcode_name(ATA_CMD_CFA_WRITE_MULT_NE),	\
 		 ata_opcode_name(ATA_CMD_REQ_SENSE_DATA),	\
 		 ata_opcode_name(ATA_CMD_SANITIZE_DEVICE),	\
+		 ata_opcode_name(ATA_CMD_ZONE_MAN_IN),		\
+		 ata_opcode_name(ATA_CMD_ZONE_MAN_OUT),		\
 		 ata_opcode_name(ATA_CMD_RESTORE),		\
 		 ata_opcode_name(ATA_CMD_READ_LONG),		\
 		 ata_opcode_name(ATA_CMD_READ_LONG_ONCE),	\
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux