Hi, Now that miphy28lp phy is present upstream we can add sata DT nodes for stih407 family silicon. As part of testing this I found a hang with the current driver implmentation which does some register writes before enabling the IP clock. Presumably on stih416 devices the sata clock must have already been enabled by the targetpack/bootloader. This series also tidys up some inaccuracies in the DT documentation where the doc hasn't kept aligned with the driver. In addtion to these fixes I've also added an example for stih407 silicon. Changes in RESEND: - Rebased on v4.0-rc6 (Pete) - Applied Acks (Pete) Peter Griffin (3): ahci: st: Update the ahci_st DT documentation ARM: DT: STi: STiH407: Add sata DT nodes. ahci: st: st_configure_oob must be called after IP is clocked. Documentation/devicetree/bindings/ata/ahci-st.txt | 45 ++++++++++++++++------- arch/arm/boot/dts/stih407-family.dtsi | 44 ++++++++++++++++++++++ drivers/ata/ahci_st.c | 6 ++- 3 files changed, 80 insertions(+), 15 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
