On Mon, 02 Mar 2015, Peter Griffin wrote: > Currently the ahci_st driver will hang the system on probe, as the > st_configure_oob function does some register writes before the IP > is clocked. This patch moves the function call to after > ahci_platform_enable_resources (which enables the IP clock), and > resolves the hang. > > Addtionally st_ahci_configure_oob should be called in the st_ahci_resume > function, so we also rectify that ensuring it is also called after > the IP clock has been enabled. > > Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx> > --- > drivers/ata/ahci_st.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) I suspect we might find a few issues like this now we're not using 'clk_ignore_unused'. Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> > diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c > index bc971af..ea0ff00 100644 > --- a/drivers/ata/ahci_st.c > +++ b/drivers/ata/ahci_st.c > @@ -68,8 +68,6 @@ static int st_ahci_deassert_resets(struct device *dev) > } > } > > - st_ahci_configure_oob(drv_data->hpriv->mmio); > - > if (drv_data->sw_rst) { > err = reset_control_deassert(drv_data->sw_rst); > if (err) { > @@ -172,6 +170,8 @@ static int st_ahci_probe(struct platform_device *pdev) > if (err) > return err; > > + st_ahci_configure_oob(drv_data->hpriv->mmio); > + > err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info, > &ahci_platform_sht); > if (err) { > @@ -222,6 +222,8 @@ static int st_ahci_resume(struct device *dev) > return err; > } > > + st_ahci_configure_oob(drv_data->hpriv->mmio); > + > return ahci_platform_resume_host(dev); > } > #endif -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html