On 08/11/2009 12:33 AM, Borislav Petkov wrote:
Yes, but send me the whole boot log.
Boris, Here is the full boot log (from /var/log/messages history). FYI, I'm beginning to believe that my entire problem might have more to do with understanding what's in my backup as compared to a problem with ide-tape. I think the driver is working proerly now. I'm going to do a series of smaller tests. I've learned that I can either use ide-tape or the st/libata drivers. I can now switch back and forth between the two. I get the same behavior from either. I will do some more testing with both, with smaller backup sets. Jim
Aug 9 19:42:12 linux kernel: imklog 3.21.10, log source = /proc/kmsg started.
Aug 9 19:42:12 linux kernel: Linux version 2.6.31-rc1 (jduda@linux) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #3 SMP PREEMPT Tue Aug 4 20:35:30 EDT 2009 Aug 9 19:42:12 linux kernel: KERNEL supported cpus: Aug 9 19:42:12 linux kernel: Intel GenuineIntel Aug 9 19:42:12 linux kernel: AMD AuthenticAMD Aug 9 19:42:12 linux kernel: NSC Geode by NSC Aug 9 19:42:12 linux kernel: Cyrix CyrixInstead Aug 9 19:42:12 linux kernel: Centaur CentaurHauls Aug 9 19:42:12 linux kernel: Transmeta GenuineTMx86 Aug 9 19:42:12 linux kernel: Transmeta TransmetaCPU Aug 9 19:42:12 linux kernel: UMC UMC UMC UMC Aug 9 19:42:12 linux kernel: BIOS-provided physical RAM map: Aug 9 19:42:12 linux kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Aug 9 19:42:12 linux kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Aug 9 19:42:12 linux kernel: BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) Aug 9 19:42:12 linux kernel: BIOS-e820: 0000000000100000 - 000000003f730000 (usable) Aug 9 19:42:12 linux kernel: BIOS-e820: 000000003f730000 - 000000003f740000 (ACPI data) Aug 9 19:42:12 linux kernel: BIOS-e820: 000000003f740000 - 000000003f7f0000 (ACPI NVS) Aug 9 19:42:12 linux kernel: BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) Aug 9 19:42:12 linux kernel: BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) Aug 9 19:42:12 linux kernel: user-defined physical RAM map: Aug 9 19:42:12 linux kernel: user: 0000000000000000 - 000000000009fc00 (usable) Aug 9 19:42:12 linux kernel: user: 000000000009fc00 - 00000000000a0000 (reserved) Aug 9 19:42:12 linux kernel: user: 00000000000e8000 - 0000000000100000 (reserved) Aug 9 19:42:12 linux kernel: user: 0000000000100000 - 000000003e800000 (usable) Aug 9 19:42:12 linux kernel: user: 000000003f730000 - 000000003f740000 (ACPI data) Aug 9 19:42:12 linux kernel: user: 000000003f740000 - 000000003f7f0000 (ACPI NVS) Aug 9 19:42:12 linux kernel: user: 000000003f7f0000 - 000000003f800000 (reserved) Aug 9 19:42:12 linux kernel: user: 00000000ffb80000 - 0000000100000000 (reserved) Aug 9 19:42:12 linux kernel: DMI 2.3 present. Aug 9 19:42:12 linux kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it. Aug 9 19:42:12 linux kernel: last_pfn = 0x3e800 max_arch_pfn = 0x100000 Aug 9 19:42:12 linux kernel: init_memory_mapping: 0000000000000000-00000000377fe000 Aug 9 19:42:12 linux kernel: RAMDISK: 37c19000 - 37fefeb4 Aug 9 19:42:12 linux kernel: Allocated new RAMDISK: 00529000 - 008ffeb4 Aug 9 19:42:12 linux kernel: Move RAMDISK from 0000000037c19000 - 0000000037fefeb3 to 00529000 - 008ffeb3 Aug 9 19:42:12 linux kernel: ACPI: RSDP 000fa1d0 00014 (v00 ACPIAM) Aug 9 19:42:12 linux kernel: ACPI: RSDT 3f730000 00030 (v01 A M I OEMRSDT 06000305 MSFT 00000097) Aug 9 19:42:12 linux kernel: ACPI: FACP 3f730200 00081 (v01 A M I OEMFACP 06000305 MSFT 00000097) Aug 9 19:42:12 linux kernel: ACPI: DSDT 3f7303f0 036CF (v01 P4G80 P4G80000 00000000 INTL 02002026) Aug 9 19:42:12 linux kernel: ACPI: FACS 3f740000 00040 Aug 9 19:42:12 linux kernel: ACPI: APIC 3f730390 0005C (v01 A M I OEMAPIC 06000305 MSFT 00000097) Aug 9 19:42:12 linux kernel: ACPI: OEMB 3f740040 0003F (v01 A M I OEMBIOS 06000305 MSFT 00000097) Aug 9 19:42:12 linux kernel: 112MB HIGHMEM available. Aug 9 19:42:12 linux kernel: 887MB LOWMEM available. Aug 9 19:42:12 linux kernel: mapped low ram: 0 - 377fe000 Aug 9 19:42:12 linux kernel: low ram: 0 - 377fe000 Aug 9 19:42:12 linux kernel: node 0 low ram: 00000000 - 377fe000 Aug 9 19:42:12 linux kernel: node 0 bootmap 00011000 - 00017f00 Aug 9 19:42:12 linux kernel: (9 early reservations) ==> bootmem [0000000000 - 00377fe000] Aug 9 19:42:12 linux kernel: #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Aug 9 19:42:12 linux kernel: #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] Aug 9 19:42:12 linux kernel: #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] Aug 9 19:42:12 linux kernel: #3 [0000100000 - 00005254dc] TEXT DATA BSS ==> [0000100000 - 00005254dc] Aug 9 19:42:12 linux kernel: #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] Aug 9 19:42:12 linux kernel: #5 [0000526000 - 0000528175] BRK ==> [0000526000 - 0000528175] Aug 9 19:42:12 linux kernel: #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] Aug 9 19:42:12 linux kernel: #7 [0000529000 - 00008ffeb4] NEW RAMDISK ==> [0000529000 - 00008ffeb4] Aug 9 19:42:12 linux kernel: #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] Aug 9 19:42:12 linux kernel: found SMP MP-table at [c00ff780] ff780 Aug 9 19:42:12 linux kernel: Zone PFN ranges: Aug 9 19:42:12 linux kernel: DMA 0x00000010 -> 0x00001000 Aug 9 19:42:12 linux kernel: Normal 0x00001000 -> 0x000377fe Aug 9 19:42:12 linux kernel: HighMem 0x000377fe -> 0x0003e800 Aug 9 19:42:12 linux kernel: Movable zone start PFN for each node Aug 9 19:42:12 linux kernel: early_node_map[2] active PFN ranges Aug 9 19:42:12 linux kernel: 0: 0x00000010 -> 0x0000009f Aug 9 19:42:12 linux kernel: 0: 0x00000100 -> 0x0003e800 Aug 9 19:42:12 linux kernel: Using APIC driver default Aug 9 19:42:12 linux kernel: ACPI: PM-Timer IO Port: 0x808 Aug 9 19:42:12 linux kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Aug 9 19:42:12 linux kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Aug 9 19:42:12 linux kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Aug 9 19:42:12 linux kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Aug 9 19:42:12 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Aug 9 19:42:12 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Aug 9 19:42:12 linux kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Aug 9 19:42:12 linux kernel: Using ACPI (MADT) for SMP configuration information Aug 9 19:42:12 linux kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs Aug 9 19:42:12 linux kernel: Allocating PCI resources starting at 3f800000 (gap: 3f800000:c0380000) Aug 9 19:42:12 linux kernel: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 Aug 9 19:42:12 linux kernel: PERCPU: Embedded 13 pages at c19cc000, static data 29980 bytes Aug 9 19:42:12 linux kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 253386 Aug 9 19:42:12 linux kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mem=1000M Aug 9 19:42:12 linux kernel: PID hash table entries: 4096 (order: 12, 16384 bytes) Aug 9 19:42:12 linux kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Aug 9 19:42:12 linux kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Aug 9 19:42:12 linux kernel: Enabling fast FPU save and restore... done. Aug 9 19:42:12 linux kernel: Enabling unmasked SIMD FPU exception support... done. Aug 9 19:42:12 linux kernel: Initializing CPU#0 Aug 9 19:42:12 linux kernel: Initializing HighMem for node 0 (000377fe:0003e800) Aug 9 19:42:12 linux kernel: Memory: 1004056k/1024000k available (2290k kernel code, 19140k reserved, 1157k data, 308k init, 114696k highmem) Aug 9 19:42:12 linux kernel: virtual kernel memory layout: Aug 9 19:42:12 linux kernel: fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB) Aug 9 19:42:12 linux kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB) Aug 9 19:42:12 linux kernel: vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) Aug 9 19:42:12 linux kernel: lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) Aug 9 19:42:12 linux kernel: .init : 0xc0463000 - 0xc04b0000 ( 308 kB) Aug 9 19:42:12 linux kernel: .data : 0xc033c923 - 0xc045e0f0 (1157 kB) Aug 9 19:42:12 linux kernel: .text : 0xc0100000 - 0xc033c923 (2290 kB) Aug 9 19:42:12 linux kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok. Aug 9 19:42:12 linux kernel: NR_IRQS:512 Aug 9 19:42:12 linux kernel: Fast TSC calibration using PIT Aug 9 19:42:12 linux kernel: Detected 2800.090 MHz processor. Aug 9 19:42:12 linux kernel: Console: colour VGA+ 80x25 Aug 9 19:42:12 linux kernel: console [tty0] enabled Aug 9 19:42:12 linux kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.18 BogoMIPS (lpj=2800090) Aug 9 19:42:12 linux kernel: Security Framework initialized Aug 9 19:42:12 linux kernel: SELinux: Initializing. Aug 9 19:42:12 linux kernel: Mount-cache hash table entries: 512 Aug 9 19:42:12 linux kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K Aug 9 19:42:12 linux kernel: CPU: L2 cache: 512K Aug 9 19:42:12 linux kernel: CPU: Physical Processor ID: 0 Aug 9 19:42:12 linux kernel: CPU: Processor Core ID: 0 Aug 9 19:42:12 linux kernel: mce: CPU supports 4 MCE banks Aug 9 19:42:12 linux kernel: CPU0: Thermal monitoring enabled (TM1) Aug 9 19:42:12 linux kernel: Checking 'hlt' instruction... OK. Aug 9 19:42:12 linux kernel: ACPI: Core revision 20090521 Aug 9 19:42:12 linux kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Aug 9 19:42:12 linux kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Aug 9 19:42:12 linux kernel: Booting processor 1 APIC 0x1 ip 0x6000 Aug 9 19:42:12 linux kernel: Initializing CPU#1 Aug 9 19:42:12 linux kernel: Calibrating delay using timer specific routine.. 5599.16 BogoMIPS (lpj=2799583) Aug 9 19:42:12 linux kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K Aug 9 19:42:12 linux kernel: CPU: L2 cache: 512K Aug 9 19:42:12 linux kernel: CPU: Physical Processor ID: 0 Aug 9 19:42:12 linux kernel: CPU: Processor Core ID: 0 Aug 9 19:42:12 linux kernel: mce: CPU supports 4 MCE banks Aug 9 19:42:12 linux kernel: CPU1: Thermal monitoring enabled (TM1) Aug 9 19:42:12 linux kernel: CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Aug 9 19:42:12 linux kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed. Aug 9 19:42:12 linux kernel: Brought up 2 CPUs Aug 9 19:42:12 linux kernel: Total of 2 processors activated (11199.34 BogoMIPS). Aug 9 19:42:12 linux kernel: khelper used greatest stack depth: 3256 bytes left Aug 9 19:42:12 linux kernel: NET: Registered protocol family 16 Aug 9 19:42:12 linux kernel: ACPI: bus type pci registered Aug 9 19:42:12 linux kernel: khelper used greatest stack depth: 3184 bytes left Aug 9 19:42:12 linux kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 Aug 9 19:42:12 linux kernel: PCI: Using configuration type 1 for base access Aug 9 19:42:12 linux kernel: bio: create slab <bio-0> at 0 Aug 9 19:42:12 linux kernel: ACPI: Interpreter enabled Aug 9 19:42:12 linux kernel: ACPI: (supports S0 S1 S3 S5) Aug 9 19:42:12 linux kernel: ACPI: Using IOAPIC for interrupt routing Aug 9 19:42:12 linux kernel: ACPI Warning: Incorrect checksum in table [OEMB] - 9C, should be 9B 20090521 tbutils-246 Aug 9 19:42:12 linux kernel: ACPI: No dock devices found. Aug 9 19:42:12 linux kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) Aug 9 19:42:12 linux kernel: pci 0000:00:00.0: Enabling MCH 'Overflow' Device Aug 9 19:42:12 linux kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Aug 9 19:42:12 linux kernel: pci 0000:00:1d.7: PME# disabled Aug 9 19:42:12 linux kernel: pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO Aug 9 19:42:12 linux kernel: pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO Aug 9 19:42:12 linux kernel: pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold Aug 9 19:42:12 linux kernel: pci 0000:00:1f.5: PME# disabled Aug 9 19:42:12 linux kernel: pci 0000:01:03.0: PME# supported from D1 D2 D3hot D3cold Aug 9 19:42:12 linux kernel: pci 0000:01:03.0: PME# disabled Aug 9 19:42:12 linux kernel: pci 0000:01:09.0: PME# supported from D0 D2 D3hot Aug 9 19:42:12 linux kernel: pci 0000:01:09.0: PME# disabled Aug 9 19:42:12 linux kernel: pci 0000:01:09.1: PME# supported from D0 D2 D3hot Aug 9 19:42:12 linux kernel: pci 0000:01:09.1: PME# disabled Aug 9 19:42:12 linux kernel: pci 0000:01:0f.0: PME# supported from D1 D2 D3hot D3cold Aug 9 19:42:12 linux kernel: pci 0000:01:0f.0: PME# disabled Aug 9 19:42:12 linux kernel: pci 0000:00:1e.0: transparent bridge Aug 9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) Aug 9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) Aug 9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) Aug 9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) Aug 9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Aug 9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 10 11 12 14 15) Aug 9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) Aug 9 19:42:12 linux kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Aug 9 19:42:12 linux kernel: usbcore: registered new interface driver usbfs Aug 9 19:42:12 linux kernel: usbcore: registered new interface driver hub Aug 9 19:42:12 linux kernel: usbcore: registered new device driver usb Aug 9 19:42:12 linux kernel: PCI: Using ACPI for IRQ routing Aug 9 19:42:12 linux kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer Aug 9 19:42:12 linux kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Aug 9 19:42:12 linux kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter Aug 9 19:42:12 linux kernel: pnp: PnP ACPI init Aug 9 19:42:12 linux kernel: ACPI: bus type pnp registered Aug 9 19:42:12 linux kernel: pnp: PnP ACPI: found 12 devices Aug 9 19:42:12 linux kernel: ACPI: ACPI bus type pnp unregistered Aug 9 19:42:12 linux kernel: system 00:06: ioport range 0x680-0x6ff has been reserved Aug 9 19:42:12 linux kernel: system 00:07: ioport range 0x4d0-0x4d1 has been reserved Aug 9 19:42:12 linux kernel: system 00:07: ioport range 0x800-0x87f has been reserved Aug 9 19:42:12 linux kernel: system 00:07: ioport range 0x480-0x4bf has been reserved Aug 9 19:42:12 linux kernel: system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved Aug 9 19:42:12 linux kernel: system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved Aug 9 19:42:12 linux kernel: system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved Aug 9 19:42:12 linux kernel: system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved Aug 9 19:42:12 linux kernel: system 00:0b: iomem range 0x0-0x9ffff could not be reserved Aug 9 19:42:12 linux kernel: system 00:0b: iomem range 0xc0000-0xdffff could not be reserved Aug 9 19:42:12 linux kernel: system 00:0b: iomem range 0xe0000-0xfffff could not be reserved Aug 9 19:42:12 linux kernel: system 00:0b: iomem range 0x100000-0x3f7effff could not be reserved Aug 9 19:42:12 linux kernel: system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved Aug 9 19:42:12 linux kernel: pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 Aug 9 19:42:12 linux kernel: pci 0000:00:1e.0: IO window: 0xd000-0xdfff Aug 9 19:42:12 linux kernel: pci 0000:00:1e.0: MEM window: 0xf6400000-0xfe5fffff Aug 9 19:42:12 linux kernel: pci 0000:00:1e.0: PREFETCH window: 0xe6200000-0xe62fffff Aug 9 19:42:12 linux kernel: NET: Registered protocol family 2 Aug 9 19:42:12 linux kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Aug 9 19:42:12 linux kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Aug 9 19:42:12 linux kernel: TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) Aug 9 19:42:12 linux kernel: TCP: Hash tables configured (established 131072 bind 65536) Aug 9 19:42:12 linux kernel: TCP reno registered Aug 9 19:42:12 linux kernel: NET: Registered protocol family 1 Aug 9 19:42:12 linux kernel: Trying to unpack rootfs image as initramfs... Aug 9 19:42:12 linux kernel: Freeing initrd memory: 3931k freed Aug 9 19:42:12 linux kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Aug 9 19:42:12 linux kernel: apm: disabled - APM is not SMP safe. Aug 9 19:42:12 linux kernel: audit: initializing netlink socket (disabled) Aug 9 19:42:12 linux kernel: type=2000 audit(1249861302.367:1): initialized Aug 9 19:42:12 linux kernel: highmem bounce pool size: 64 pages Aug 9 19:42:12 linux kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages Aug 9 19:42:12 linux kernel: VFS: Disk quotas dquot_6.5.2 Aug 9 19:42:12 linux kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Aug 9 19:42:12 linux kernel: msgmni has been set to 1745 Aug 9 19:42:12 linux kernel: cryptomgr_test used greatest stack depth: 3024 bytes left Aug 9 19:42:12 linux kernel: alg: No test for stdrng (krng) Aug 9 19:42:12 linux kernel: io scheduler noop registered Aug 9 19:42:12 linux kernel: io scheduler anticipatory registered (default) Aug 9 19:42:12 linux kernel: io scheduler deadline registered Aug 9 19:42:12 linux kernel: io scheduler cfq registered Aug 9 19:42:12 linux kernel: processor LNXCPU:00: registered as cooling_device0 Aug 9 19:42:12 linux kernel: processor LNXCPU:01: registered as cooling_device1 Aug 9 19:42:12 linux kernel: isapnp: Scanning for PnP cards... Aug 9 19:42:12 linux kernel: isapnp: No Plug & Play device found Aug 9 19:42:12 linux kernel: Real Time Clock Driver v1.12b Aug 9 19:42:12 linux kernel: intel_rng: FWH not detected Aug 9 19:42:12 linux kernel: Linux agpgart interface v0.103 Aug 9 19:42:12 linux kernel: agpgart-intel 0000:00:00.0: Intel 865 Chipset Aug 9 19:42:12 linux kernel: agpgart-intel 0000:00:00.0: detected 8060K stolen memory Aug 9 19:42:12 linux kernel: agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 Aug 9 19:42:12 linux kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled Aug 9 19:42:12 linux kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Aug 9 19:42:12 linux kernel: Platform driver 'serial8250' needs updating - please use dev_pm_ops Aug 9 19:42:12 linux kernel: brd: module loaded Aug 9 19:42:12 linux kernel: Uniform Multi-Platform E-IDE driver Aug 9 19:42:12 linux kernel: piix 0000:00:1f.1: IDE controller (0x8086:0x24db rev 0x02) Aug 9 19:42:12 linux kernel: PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007) Aug 9 19:42:12 linux kernel: PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Aug 9 19:42:12 linux kernel: piix 0000:00:1f.1: not 100% native mode: will probe irqs later Aug 9 19:42:12 linux kernel: ide0: BM-DMA at 0xfc00-0xfc07 Aug 9 19:42:12 linux kernel: ide1: BM-DMA at 0xfc08-0xfc0f Aug 9 19:42:12 linux kernel: hdc: HL-DT-ST GCE-8160B, ATAPI CD/DVD-ROM drive Aug 9 19:42:12 linux kernel: hdd: Seagate STT20000A, ATAPI TAPE drive Aug 9 19:42:12 linux kernel: hdc: MWDMA2 mode selected Aug 9 19:42:12 linux kernel: hdd: Disabling (U)DMA for Seagate STT20000A (blacklisted) Aug 9 19:42:12 linux kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Aug 9 19:42:12 linux kernel: ide1 at 0x170-0x177,0x376 on irq 15 Aug 9 19:42:12 linux kernel: ide-gd driver 1.18 Aug 9 19:42:12 linux kernel: ide-cd driver 5.00 Aug 9 19:42:12 linux kernel: ide-cd: hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache Aug 9 19:42:12 linux kernel: Uniform CD-ROM driver Revision: 3.20 Aug 9 19:42:12 linux kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 Aug 9 19:42:12 linux kernel: Platform driver 'i8042' needs updating - please use dev_pm_ops Aug 9 19:42:12 linux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Aug 9 19:42:12 linux kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Aug 9 19:42:12 linux kernel: mice: PS/2 mouse device common for all mice Aug 9 19:42:12 linux kernel: cpuidle: using governor ladder Aug 9 19:42:12 linux kernel: usbcore: registered new interface driver hiddev Aug 9 19:42:12 linux kernel: usbcore: registered new interface driver usbhid Aug 9 19:42:12 linux kernel: usbhid: v2.6:USB HID core driver Aug 9 19:42:12 linux kernel: TCP cubic registered Aug 9 19:42:12 linux kernel: Initializing XFRM netlink socket Aug 9 19:42:12 linux kernel: NET: Registered protocol family 17 Aug 9 19:42:12 linux kernel: Using IPI No-Shortcut mode Aug 9 19:42:12 linux kernel: Freeing unused kernel memory: 308k freed Aug 9 19:42:12 linux kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Aug 9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 Aug 9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller Aug 9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Aug 9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: debug port 1 Aug 9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe77bc00 Aug 9 19:42:12 linux kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Aug 9 19:42:12 linux kernel: usb usb1: configuration #1 chosen from 1 choice Aug 9 19:42:12 linux kernel: hub 1-0:1.0: USB hub found Aug 9 19:42:12 linux kernel: hub 1-0:1.0: 8 ports detected Aug 9 19:42:12 linux kernel: modprobe used greatest stack depth: 2680 bytes left Aug 9 19:42:12 linux kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Aug 9 19:42:12 linux kernel: uhci_hcd: USB Universal Host Controller Interface driver Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00 Aug 9 19:42:12 linux kernel: usb usb2: configuration #1 chosen from 1 choice Aug 9 19:42:12 linux kernel: hub 2-0:1.0: USB hub found Aug 9 19:42:12 linux kernel: hub 2-0:1.0: 2 ports detected Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20 Aug 9 19:42:12 linux kernel: usb usb3: configuration #1 chosen from 1 choice Aug 9 19:42:12 linux kernel: hub 3-0:1.0: USB hub found Aug 9 19:42:12 linux kernel: hub 3-0:1.0: 2 ports detected Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40 Aug 9 19:42:12 linux kernel: usb usb4: configuration #1 chosen from 1 choice Aug 9 19:42:12 linux kernel: hub 4-0:1.0: USB hub found Aug 9 19:42:12 linux kernel: hub 4-0:1.0: 2 ports detected Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Aug 9 19:42:12 linux kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80 Aug 9 19:42:12 linux kernel: usb usb5: configuration #1 chosen from 1 choice Aug 9 19:42:12 linux kernel: hub 5-0:1.0: USB hub found Aug 9 19:42:12 linux kernel: hub 5-0:1.0: 2 ports detected Aug 9 19:42:12 linux kernel: modprobe used greatest stack depth: 2668 bytes left Aug 9 19:42:12 linux kernel: SCSI subsystem initialized Aug 9 19:42:12 linux kernel: ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Aug 9 19:42:12 linux kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] Aug 9 19:42:12 linux kernel: scsi0 : ata_piix Aug 9 19:42:12 linux kernel: scsi1 : ata_piix Aug 9 19:42:12 linux kernel: ata1: SATA max UDMA/133 cmd 0xefe0 ctl 0xefac bmdma 0xef60 irq 18 Aug 9 19:42:12 linux kernel: ata2: SATA max UDMA/133 cmd 0xefa0 ctl 0xefa8 bmdma 0xef68 irq 18 Aug 9 19:42:12 linux kernel: ata1.00: ATA-7: Maxtor 6L200S0, BANC1G10, max UDMA/133 Aug 9 19:42:12 linux kernel: ata1.00: 398297088 sectors, multi 16: LBA48 NCQ (not used) Aug 9 19:42:12 linux kernel: ata2.00: ATA-7: Maxtor 7L300S0, BANC1G10, max UDMA/133 Aug 9 19:42:12 linux kernel: ata2.00: 586114704 sectors, multi 16: LBA48 NCQ (not used) Aug 9 19:42:12 linux kernel: ata1.00: configured for UDMA/133 Aug 9 19:42:12 linux kernel: ata2.00: configured for UDMA/133 Aug 9 19:42:12 linux kernel: scsi 0:0:0:0: Direct-Access ATA Maxtor 6L200S0 BANC PQ: 0 ANSI: 5 Aug 9 19:42:12 linux kernel: sd 0:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB) Aug 9 19:42:12 linux kernel: scsi 1:0:0:0: Direct-Access ATA Maxtor 7L300S0 BANC PQ: 0 ANSI: 5 Aug 9 19:42:12 linux kernel: sd 0:0:0:0: [sda] Write Protect is off Aug 9 19:42:12 linux kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 9 19:42:12 linux kernel: sd 1:0:0:0: [sdb] 586114704 512-byte logical blocks: (300 GB/279 GiB) Aug 9 19:42:12 linux kernel: sda: Aug 9 19:42:12 linux kernel: sd 1:0:0:0: [sdb] Write Protect is off Aug 9 19:42:12 linux kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 9 19:42:12 linux kernel: sdb: sda1 sda2 Aug 9 19:42:12 linux kernel: sd 0:0:0:0: [sda] Attached SCSI disk Aug 9 19:42:12 linux kernel: unknown partition table Aug 9 19:42:12 linux kernel: sd 1:0:0:0: [sdb] Attached SCSI disk Aug 9 19:42:12 linux kernel: device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx Aug 9 19:42:12 linux kernel: input: PS/2 Logitech Mouse as /class/input/input0 Aug 9 19:42:12 linux kernel: input: AT Translated Set 2 keyboard as /class/input/input1 Aug 9 19:42:12 linux kernel: usb 3-1: new full speed USB device using uhci_hcd and address 2 Aug 9 19:42:12 linux kernel: lvm used greatest stack depth: 2120 bytes left Aug 9 19:42:12 linux kernel: device-mapper: table: 253:0: target device sda2 is misaligned Aug 9 19:42:12 linux kernel: device-mapper: table: 253:0: target device sda2 is misaligned Aug 9 19:42:12 linux kernel: device-mapper: table: 253:1: target device sda2 is misaligned Aug 9 19:42:12 linux kernel: device-mapper: table: 253:1: target device sda2 is misaligned Aug 9 19:42:12 linux kernel: usb 3-1: configuration #1 chosen from 1 choice Aug 9 19:42:12 linux kernel: EXT3-fs: INFO: recovery required on readonly filesystem. Aug 9 19:42:12 linux kernel: EXT3-fs: write access will be enabled during recovery. Aug 9 19:42:12 linux kernel: EXT3-fs: dm-0: orphan cleanup on readonly fs Aug 9 19:42:12 linux kernel: EXT3-fs: dm-0: 5 orphan inodes deleted Aug 9 19:42:12 linux kernel: EXT3-fs: recovery complete. Aug 9 19:42:12 linux kernel: kjournald starting. Commit interval 5 seconds Aug 9 19:42:12 linux kernel: EXT3-fs: mounted filesystem with writeback data mode. Aug 9 19:42:12 linux kernel: SELinux: Disabled at runtime. Aug 9 19:42:12 linux kernel: type=1404 audit(1249861307.958:2): selinux=0 auid=4294967295 ses=4294967295 Aug 9 19:42:12 linux kernel: cat used greatest stack depth: 2032 bytes left Aug 9 19:42:12 linux kernel: udevd version 127 started Aug 9 19:42:12 linux kernel: Platform driver 'pcspkr' needs updating - please use dev_pm_ops Aug 9 19:42:12 linux kernel: input: PC Speaker as /class/input/input2 Aug 9 19:42:12 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51 Aug 9 19:42:12 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC Aug 9 19:42:12 linux kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Aug 9 19:42:12 linux kernel: serial 0000:01:09.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Aug 9 19:42:12 linux kernel: ttyS4: detected caps 00000700 should be 00000100 Aug 9 19:42:12 linux kernel: 0000:01:09.0: ttyS4 at I/O 0xdea0 (irq = 21) is a 16C950/954 Aug 9 19:42:12 linux kernel: ttyS5: detected caps 00000700 should be 00000100 Aug 9 19:42:12 linux kernel: 0000:01:09.0: ttyS5 at I/O 0xdea8 (irq = 21) is a 16C950/954 Aug 9 19:42:12 linux kernel: ttyS6: detected caps 00000700 should be 00000100 Aug 9 19:42:12 linux kernel: 0000:01:09.0: ttyS6 at I/O 0xdeb0 (irq = 21) is a 16C950/954 Aug 9 19:42:12 linux kernel: ttyS7: detected caps 00000700 should be 00000100 Aug 9 19:42:12 linux kernel: 0000:01:09.0: ttyS7 at I/O 0xdeb8 (irq = 21) is a 16C950/954 Aug 9 19:42:12 linux kernel: usbcore: registered new interface driver usbserial Aug 9 19:42:12 linux kernel: USB Serial support registered for generic Aug 9 19:42:12 linux kernel: usbcore: registered new interface driver usbserial_generic Aug 9 19:42:12 linux kernel: usbserial: USB Serial Driver core Aug 9 19:42:12 linux kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Aug 9 19:42:12 linux kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0 Aug 9 19:42:12 linux kernel: input: Power Button as /class/input/input3 Aug 9 19:42:12 linux kernel: ACPI: Power Button [PWRF] Aug 9 19:42:12 linux kernel: input: Power Button as /class/input/input4 Aug 9 19:42:12 linux kernel: ACPI: Power Button [PWRB] Aug 9 19:42:12 linux kernel: 8139too Fast Ethernet driver 0.9.28 Aug 9 19:42:12 linux kernel: 8139too 0000:01:0f.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Aug 9 19:42:12 linux kernel: eth0: RealTek RTL8139 at 0xd400, 00:0c:6e:82:94:4e, IRQ 19 Aug 9 19:42:12 linux kernel: sata_sil 0000:01:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Aug 9 19:42:12 linux kernel: scsi2 : sata_sil Aug 9 19:42:12 linux kernel: scsi3 : sata_sil Aug 9 19:42:12 linux kernel: ata3: SATA max UDMA/100 mmio m512@0xfe5ff800 tf 0xfe5ff880 irq 21 Aug 9 19:42:12 linux kernel: ata4: SATA max UDMA/100 mmio m512@0xfe5ff800 tf 0xfe5ff8c0 irq 21 Aug 9 19:42:12 linux kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded Aug 9 19:42:12 linux kernel: r8169 0000:01:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 9 19:42:12 linux kernel: r8169 0000:01:03.0: no PCI Express capability Aug 9 19:42:12 linux kernel: eth1: RTL8110s at 0xf8bf4c00, 00:14:bf:56:f4:1d, XID 04000000 IRQ 16 Aug 9 19:42:12 linux kernel: USB Serial support registered for pl2303 Aug 9 19:42:12 linux kernel: pl2303 3-1:1.0: pl2303 converter detected Aug 9 19:42:12 linux kernel: usb 3-1: pl2303 converter now attached to ttyUSB0 Aug 9 19:42:12 linux kernel: usbcore: registered new interface driver pl2303 Aug 9 19:42:12 linux kernel: pl2303: Prolific PL2303 USB to serial adaptor driver Aug 9 19:42:12 linux kernel: i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Aug 9 19:42:12 linux kernel: ata3: SATA link down (SStatus 0 SControl 310) Aug 9 19:42:12 linux kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) Aug 9 19:42:12 linux kernel: ata4.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133 Aug 9 19:42:12 linux kernel: ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) Aug 9 19:42:12 linux kernel: ata4.00: configured for UDMA/100 Aug 9 19:42:12 linux kernel: scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 Aug 9 19:42:12 linux kernel: sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) Aug 9 19:42:12 linux kernel: sd 3:0:0:0: Attached scsi generic sg2 type 0 Aug 9 19:42:12 linux kernel: sd 3:0:0:0: [sdc] Write Protect is off Aug 9 19:42:12 linux kernel: sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 9 19:42:12 linux kernel: sdc: unknown partition table Aug 9 19:42:12 linux kernel: sd 3:0:0:0: [sdc] Attached SCSI disk Aug 9 19:42:12 linux kernel: Linux video capture interface: v2.00 Aug 9 19:42:12 linux kernel: Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Aug 9 19:42:12 linux kernel: ENS1371 0000:01:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Aug 9 19:42:12 linux kernel: bttv: driver version 0.9.18 loaded Aug 9 19:42:12 linux kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture Aug 9 19:42:12 linux kernel: cx88/0: cx2388x v4l2 driver version 0.0.7 loaded Aug 9 19:42:12 linux kernel: cx2388x alsa driver version 0.0.7 loaded Aug 9 19:42:12 linux kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded Aug 9 19:42:12 linux kernel: intel8x0_measure_ac97_clock: measured 50586 usecs (2438 samples) Aug 9 19:42:12 linux kernel: intel8x0: clocking to 48000 Aug 9 19:42:12 linux kernel: modprobe used greatest stack depth: 1456 bytes left Aug 9 19:42:12 linux kernel: bttv: Bt8xx card found (0). Aug 9 19:42:12 linux kernel: bttv 0000:01:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 9 19:42:12 linux kernel: bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 23, latency: 64, mmio: 0xe62fe000 Aug 9 19:42:12 linux kernel: bttv0: using: GrandTec Multi Capture Card (Bt878) [card=77,insmod option] Aug 9 19:42:12 linux kernel: IRQ 23/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs Aug 9 19:42:12 linux kernel: bttv0: tuner absent Aug 9 19:42:12 linux kernel: bttv0: registered device video0 Aug 9 19:42:12 linux kernel: bttv0: registered device vbi0 Aug 9 19:42:12 linux kernel: bttv0: PLL: 28636363 => 35468950 .. ok Aug 9 19:42:12 linux kernel: cx8800 0000:01:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Aug 9 19:42:12 linux kernel: cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47,autodetected], frontend(s): 1 Aug 9 19:42:12 linux kernel: cx88[0]: TV tuner type 64, Radio tuner type -1 Aug 9 19:42:12 linux kernel: tuner 2-0043: chip found @ 0x86 (cx88[0]) Aug 9 19:42:12 linux kernel: tda9887 2-0043: creating new instance Aug 9 19:42:12 linux kernel: tda9887 2-0043: tda988[5/6/7] found Aug 9 19:42:12 linux kernel: tuner 2-0061: chip found @ 0xc2 (cx88[0]) Aug 9 19:42:12 linux kernel: tuner-simple 2-0061: creating new instance Aug 9 19:42:12 linux kernel: tuner-simple 2-0061: type set to 64 (LG TDVS-H06xF) Aug 9 19:42:12 linux kernel: input: cx88 IR (pcHDTV HD5500 HDTV) as /class/input/input5 Aug 9 19:42:12 linux kernel: cx88[0]/0: found at 0000:01:0a.0, rev: 5, irq: 22, latency: 64, mmio: 0xfa000000 Aug 9 19:42:12 linux kernel: IRQ 22/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs Aug 9 19:42:12 linux kernel: cx88[0]/0: registered device video1 [v4l2] Aug 9 19:42:12 linux kernel: cx88[0]/0: registered device vbi1 Aug 9 19:42:12 linux kernel: cx88_audio 0000:01:0a.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Aug 9 19:42:12 linux kernel: IRQ 22/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs Aug 9 19:42:12 linux kernel: cx88[0]/1: CX88x/0: ALSA support for cx2388x boards Aug 9 19:42:12 linux kernel: cx88[0]/2: cx2388x 8802 Driver Manager Aug 9 19:42:12 linux kernel: cx88-mpeg driver manager 0000:01:0a.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Aug 9 19:42:12 linux kernel: cx88[0]/2: found at 0000:01:0a.2, rev: 5, irq: 22, latency: 64, mmio: 0xfc000000 Aug 9 19:42:12 linux kernel: IRQ 22/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs Aug 9 19:42:12 linux kernel: cx88/2: cx2388x dvb driver version 0.0.7 loaded Aug 9 19:42:12 linux kernel: cx88/2: registering cx8802 driver, type: dvb access: shared Aug 9 19:42:12 linux kernel: cx88[0]/2: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47] Aug 9 19:42:12 linux kernel: cx88[0]/2: cx2388x based DVB/ATSC card Aug 9 19:42:12 linux kernel: cx8802_alloc_frontends() allocating 1 frontend(s) Aug 9 19:42:12 linux kernel: tuner-simple 2-0061: attaching existing instance Aug 9 19:42:12 linux kernel: tuner-simple 2-0061: type set to 64 (LG TDVS-H06xF) Aug 9 19:42:12 linux kernel: tda9887 2-0043: attaching existing instance Aug 9 19:42:12 linux kernel: DVB: registering new adapter (cx88[0]) Aug 9 19:42:12 linux kernel: DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... Aug 9 19:42:12 linux kernel: device-mapper: table: 253:2: target device sdb is misaligned Aug 9 19:42:12 linux kernel: device-mapper: table: 253:2: target device sdc is misaligned Aug 9 19:42:12 linux kernel: device-mapper: table: 253:2: target device sdb is misaligned Aug 9 19:42:12 linux kernel: device-mapper: table: 253:2: target device sdc is misaligned Aug 9 19:42:12 linux kernel: EXT3 FS on dm-0, internal journal Aug 9 19:42:12 linux kernel: kjournald starting. Commit interval 5 seconds Aug 9 19:42:12 linux kernel: EXT3 FS on sda1, internal journal Aug 9 19:42:12 linux kernel: EXT3-fs: mounted filesystem with writeback data mode. Aug 9 19:42:12 linux kernel: kjournald starting. Commit interval 5 seconds Aug 9 19:42:12 linux kernel: EXT3 FS on dm-2, internal journal Aug 9 19:42:12 linux kernel: EXT3-fs: mounted filesystem with writeback data mode. Aug 9 19:42:12 linux kernel: Adding 1015800k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1015800k Aug 9 19:42:12 linux kernel: NET: Registered protocol family 10 Aug 9 19:42:12 linux kernel: lo: Disabled Privacy Extensions Aug 9 19:42:12 linux kernel: r8169: eth1: link up Aug 9 19:42:12 linux rsyslogd: [origin software="rsyslogd" swVersion="3.21.10" x-pid="1679" x-info="http://www.rsyslog.com";] restart Aug 9 19:42:12 linux rpc.statd[1717]: Version 1.1.4 Starting Aug 9 19:42:13 linux kernel: RPC: Registered udp transport module. Aug 9 19:42:13 linux kernel: RPC: Registered tcp transport module. Aug 9 19:42:16 linux acpid: starting up Aug 9 19:42:16 linux ypserv[1830]: WARNING: no securenets file found! Aug 9 19:42:17 linux dnsmasq[1865]: started, version 2.45 cachesize 150 Aug 9 19:42:17 linux dnsmasq[1865]: compile time options: IPv6 GNU-getopt no-ISC-leasefile DBus no-I18N TFTP Aug 9 19:42:17 linux dnsmasq[1865]: reading /etc/resolv.conf Aug 9 19:42:17 linux dnsmasq[1865]: using nameserver 71.250.0.12#53 Aug 9 19:42:17 linux dnsmasq[1865]: using nameserver 71.243.0.12#53 Aug 9 19:42:17 linux dnsmasq[1865]: read /etc/hosts - 14 addresses Aug 9 19:42:17 linux xinetd[1884]: /etc/xinetd.d/archive is not a regular file. It is being skipped. Aug 9 19:42:17 linux ntpd[1891]: ntpd 4.2.4p6@xxxxxxxx Mon Jan 12 14:07:28 UTC 2009 (1) Aug 9 19:42:17 linux ntpd[1892]: precision = 0.627 usec Aug 9 19:42:17 linux ntpd[1892]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled Aug 9 19:42:17 linux ntpd[1892]: Listening on interface #1 wildcard, ::#123 Disabled Aug 9 19:42:17 linux ntpd[1892]: Listening on interface #2 lo, ::1#123 Enabled Aug 9 19:42:17 linux ntpd[1892]: Listening on interface #3 eth1, fe80::214:bfff:fe56:f41d#123 Enabled Aug 9 19:42:17 linux ntpd[1892]: Listening on interface #4 lo, 127.0.0.1#123 Enabled Aug 9 19:42:17 linux ntpd[1892]: Listening on interface #5 eth1, 192.168.1.254#123 Enabled Aug 9 19:42:17 linux ntpd[1892]: Listening on routing socket on fd #22 for interface updates Aug 9 19:42:17 linux ntpd[1892]: kernel time sync status 0040 Aug 9 19:42:17 linux xinetd[1884]: /etc/xinetd.d/save is not a regular file. It is being skipped. Aug 9 19:42:17 linux ntpd[1892]: frequency initialized -74.253 PPM from /var/lib/ntp/drift Aug 9 19:42:17 linux xinetd[1884]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. Aug 9 19:42:17 linux xinetd[1884]: Started working: 2 available services Aug 9 19:42:18 linux kernel: Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). Aug 9 19:42:18 linux rpc.idmapd[1754]: nfsdreopen: Opening '/proc/net/rpc/nfs4.nametoid/channel' failed: errno 2 (No such file or directory) Aug 9 19:42:18 linux rpc.idmapd[1754]: nfsdreopen: Opening '/proc/net/rpc/nfs4.idtoname/channel' failed: errno 2 (No such file or directory) Aug 9 19:42:21 linux dhcpd: Internet Systems Consortium DHCP Server 4.0.0 Aug 9 19:42:21 linux dhcpd: Copyright 2004-2007 Internet Systems Consortium. Aug 9 19:42:21 linux dhcpd: All rights reserved. Aug 9 19:42:21 linux dhcpd: For info, please visit http://www.isc.org/sw/dhcp/ Aug 9 19:42:21 linux dhcpd: Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file Aug 9 19:42:21 linux dhcpd: Wrote 0 class decls to leases file. Aug 9 19:42:21 linux dhcpd: Wrote 0 deleted host decls to leases file. Aug 9 19:42:21 linux dhcpd: Wrote 0 new dynamic host decls to leases file. Aug 9 19:42:21 linux dhcpd: Wrote 48 leases to leases file. Aug 9 19:42:21 linux dhcpd: Listening on LPF/eth1/00:14:bf:56:f4:1d/192.168.1.0/24 Aug 9 19:42:21 linux dhcpd: Sending on LPF/eth1/00:14:bf:56:f4:1d/192.168.1.0/24 Aug 9 19:42:21 linux dhcpd: Sending on Socket/fallback/fallback-net Aug 9 19:42:26 linux /usr/sbin/gpm[2165]: *** info [daemon/startup.c(136)]: Aug 9 19:42:26 linux /usr/sbin/gpm[2165]: Started gpm successfully. Entered daemon mode. Aug 9 19:42:26 linux /usr/sbin/gpm[2165]: *** info [mice.c(1988)]: Aug 9 19:42:26 linux /usr/sbin/gpm[2165]: imps2: Auto-detected intellimouse PS/2 Aug 9 19:42:29 linux kernel: fuse init (API version 7.11) Aug 9 19:42:32 linux avahi-daemon[2300]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70). Aug 9 19:42:32 linux avahi-daemon[2300]: Successfully dropped root privileges. Aug 9 19:42:32 linux avahi-daemon[2300]: avahi-daemon 0.6.22 starting up. Aug 9 19:42:32 linux avahi-daemon[2300]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! Aug 9 19:42:32 linux avahi-daemon[2300]: Successfully called chroot(). Aug 9 19:42:32 linux avahi-daemon[2300]: Successfully dropped remaining capabilities. Aug 9 19:42:32 linux avahi-daemon[2300]: Loading service file /services/ssh.service. Aug 9 19:42:32 linux avahi-daemon[2300]: Joining mDNS multicast group on interface eth1.IPv4 with address 192.168.1.254. Aug 9 19:42:32 linux avahi-daemon[2300]: New relevant interface eth1.IPv4 for mDNS. Aug 9 19:42:32 linux avahi-daemon[2300]: Network interface enumeration completed. Aug 9 19:42:32 linux avahi-daemon[2300]: Registering new address record for fe80::214:bfff:fe56:f41d on eth1.*. Aug 9 19:42:32 linux avahi-daemon[2300]: Registering new address record for 192.168.1.254 on eth1.IPv4. Aug 9 19:42:32 linux avahi-daemon[2300]: Registering HINFO record with values 'I686'/'LINUX'. Aug 9 19:42:33 linux avahi-daemon[2300]: Server startup complete. Host name is linux.local. Local service cookie is 2163202976. Aug 9 19:42:34 linux avahi-daemon[2300]: Service "linux" (/services/ssh.service) successfully established. Aug 9 19:42:36 linux logger: Starting misterhouse: Aug 9 19:42:36 linux logger: /usr/local/bin:/usr/X11R6/bin:/sbin:/usr/sbin:/bin:/usr/bin Aug 9 19:42:36 linux logger: /home/misterhouse Aug 9 19:42:36 linux acpid: client connected from 2530[68:68] Aug 9 19:42:36 linux logger: :/usr/local/lib Aug 9 19:42:36 linux logger: :0 Aug 9 19:42:36 linux logger: /bin/tcsh Aug 9 19:42:44 linux pulseaudio[2562]: pid.c: Stale PID file, overwriting. Aug 9 19:42:44 linux pulseaudio[2562]: module-alsa-card.c: Failed to find a working profile. Aug 9 19:42:44 linux pulseaudio[2562]: module.c: Failed to load module "module-alsa-card" (argument: "device_id=2 name=pci_14f1_8801 card_name=alsa_card.pci_14f1_8801 tsched=1"): initialization failed. Aug 9 19:42:46 linux pulseaudio[2562]: main.c: Failed to acquire org.pulseaudio.Server: org.freedesktop.DBus.Error.AccessDenied: Connection ":1.8" is not allowed to own the service "org.pulseaudio.Server" due to security policies in the configuration file Aug 9 19:42:46 linux smartd[2578]: smartd version 5.38 [i386-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Aug 9 19:42:46 linux smartd[2578]: Home page is http://smartmontools.sourceforge.net/#012 Aug 9 19:42:46 linux smartd[2578]: Opened configuration file /etc/smartd.conf Aug 9 19:42:46 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 30.00 ms Aug 9 19:42:46 linux smartd[2578]: Drive: DEVICESCAN, implied '-a' Directive on line 28 of file /etc/smartd.conf Aug 9 19:42:46 linux smartd[2578]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices Aug 9 19:42:46 linux smartd[2578]: Device: /dev/hdc, opened Aug 9 19:42:46 linux smartd[2578]: Device: /dev/hdc, packet devices [this device CD/DVD] not SMART capable Aug 9 19:42:46 linux smartd[2578]: Device: /dev/sda, opened Aug 9 19:42:46 linux smartd[2578]: Device /dev/sda: using '-d sat' for ATA disk behind SAT layer. Aug 9 19:42:46 linux smartd[2578]: Device: /dev/sda, opened Aug 9 19:42:46 linux smartd[2578]: Device: /dev/sda, found in smartd database. Aug 9 19:42:46 linux smartd[2578]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. Aug 9 19:42:46 linux smartd[2578]: Device: /dev/sdb, opened Aug 9 19:42:47 linux smartd[2578]: Device /dev/sdb: using '-d sat' for ATA disk behind SAT layer. Aug 9 19:42:47 linux smartd[2578]: Device: /dev/sdb, opened Aug 9 19:42:47 linux smartd[2578]: Device: /dev/sdb, found in smartd database. Aug 9 19:42:47 linux smartd[2578]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list. Aug 9 19:42:47 linux smartd[2578]: Device: /dev/sdc, opened Aug 9 19:42:47 linux smartd[2578]: Device /dev/sdc: using '-d sat' for ATA disk behind SAT layer. Aug 9 19:42:47 linux smartd[2578]: Device: /dev/sdc, opened Aug 9 19:42:47 linux smartd[2578]: Device: /dev/sdc, found in smartd database. Aug 9 19:42:47 linux smartd[2578]: Device: /dev/sdc, is SMART capable. Adding to "monitor" list. Aug 9 19:42:47 linux smartd[2578]: Monitoring 0 ATA and 3 SCSI devices Aug 9 19:42:48 linux smartd[2580]: smartd has fork()ed into background mode. New PID=2580. Aug 9 19:42:49 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 30.00 ms Aug 9 19:42:49 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 40.00 ms Aug 9 19:42:49 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 40.00 ms Aug 9 19:42:51 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 50.00 ms Aug 9 19:42:51 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 60.00 ms Aug 9 19:42:53 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 70.00 ms Aug 9 19:42:54 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 50.00 ms Aug 9 19:42:54 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 80.00 ms Aug 9 19:42:56 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 90.00 ms Aug 9 19:42:56 linux kernel: bttv0: PLL can sleep, using XTAL (28636363). Aug 9 19:42:57 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 100.00 ms Aug 9 19:42:59 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 110.00 ms Aug 9 19:43:00 linux acpid: client connected from 2767[0:0] Aug 9 19:43:01 linux kernel: [drm] Initialized drm 1.1.0 20060810 Aug 9 19:43:01 linux kernel: pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Aug 9 19:43:01 linux kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Aug 9 19:43:01 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 30.00 ms Aug 9 19:43:02 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 120.00 ms Aug 9 19:43:04 linux xinetd[1884]: START: telnet pid=2846 from=::ffff:192.168.1.10 Aug 9 19:43:05 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 130.00 ms Aug 9 19:43:05 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 60.00 ms Aug 9 19:43:09 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 140.00 ms Aug 9 19:43:10 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 150.00 ms Aug 9 19:43:12 linux gdm-simple-greeter[2980]: WARNING: Unable to query filesystem type for /home/icecast: Error getting filesystem info: No such file or directory Aug 9 19:43:13 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 160.00 ms Aug 9 19:43:15 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 70.00 ms Aug 9 19:43:16 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 170.00 ms Aug 9 19:43:19 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 180.00 ms Aug 9 19:43:36 linux pulseaudio[2562]: alsa-source.c: Increasing wakeup watermark to 190.00 ms Aug 9 19:44:19 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51 Aug 9 19:44:19 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC Aug 9 19:45:30 linux xinetd[1884]: START: tftp pid=4610 from=192.168.1.200 Aug 9 19:46:36 linux ntpd[1892]: synchronized to 4.79.132.217, stratum 2 Aug 9 19:46:36 linux ntpd[1892]: time reset +0.254707 s Aug 9 19:46:36 linux ntpd[1892]: kernel time sync status change 0001 Aug 9 19:49:47 linux xinetd[1884]: START: telnet pid=8275 from=::ffff:192.168.1.10 Aug 9 19:50:41 linux kernel: Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! Aug 9 19:51:02 linux ntpd[1892]: synchronized to 72.52.190.26, stratum 2 Aug 9 19:56:54 linux kernel: hello Aug 9 19:56:54 linux kernel: hello jim2 Aug 9 19:56:54 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51 Aug 9 19:56:54 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC Aug 9 19:58:19 linux sm-notify[1719]: Unable to notify sharon, giving up Aug 9 19:58:19 linux Backgrounding to notify hosts... Aug 9 20:00:04 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 30.00 ms Aug 9 20:00:30 linux xinetd[1884]: EXIT: tftp status=0 pid=4610 duration=900(sec) Aug 9 20:06:11 linux dhcpd: DHCPDISCOVER from 00:30:1b:2b:4e:8c via eth1 Aug 9 20:06:11 linux dhcpd: DHCPOFFER on 192.168.1.14 to 00:30:1b:2b:4e:8c via eth1 Aug 9 20:06:13 linux dhcpd: DHCPREQUEST for 192.168.1.14 (192.168.1.254) from 00:30:1b:2b:4e:8c via eth1 Aug 9 20:06:13 linux dhcpd: DHCPACK on 192.168.1.14 to 00:30:1b:2b:4e:8c via eth1 Aug 9 20:06:13 linux xinetd[1884]: START: tftp pid=26744 from=192.168.1.14 Aug 9 20:06:13 linux in.tftpd[26745]: tftp: client does not accept options Aug 9 20:06:15 linux dhcpd: DHCPDISCOVER from 00:30:1b:2b:4e:8c via eth1 Aug 9 20:06:15 linux dhcpd: DHCPOFFER on 192.168.1.14 to 00:30:1b:2b:4e:8c via eth1 Aug 9 20:06:15 linux dhcpd: DHCPREQUEST for 192.168.1.14 (192.168.1.254) from 00:30:1b:2b:4e:8c via eth1 Aug 9 20:06:15 linux dhcpd: DHCPACK on 192.168.1.14 to 00:30:1b:2b:4e:8c via eth1 Aug 9 20:06:15 linux mountd[1933]: authenticated mount request from 192.168.1.14:952 for /tftpboot/muekow/i386 (/tftpboot/muekow) Aug 9 20:06:23 linux mountd[1933]: authenticated mount request from 192.168.1.14:915 for /home (/home) Aug 9 20:06:23 linux mountd[1933]: authenticated mount request from 192.168.1.14:1010 for /media (/media) Aug 9 20:08:17 linux kernel: hello Aug 9 20:08:17 linux kernel: hello jim2 Aug 9 20:08:17 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51 Aug 9 20:08:17 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC Aug 9 20:12:49 linux smartd[2580]: Device: /dev/sda, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 248 to 249 Aug 9 20:14:14 linux dhcpd: DHCPDISCOVER from 00:1b:24:b8:68:e2 via eth1 Aug 9 20:14:15 linux dhcpd: DHCPOFFER on 192.168.1.177 to 00:1b:24:b8:68:e2 via eth1 Aug 9 20:14:15 linux dhcpd: DHCPREQUEST for 192.168.1.177 (192.168.1.254) from 00:1b:24:b8:68:e2 via eth1 Aug 9 20:14:15 linux dhcpd: DHCPACK on 192.168.1.177 to 00:1b:24:b8:68:e2 via eth1 Aug 9 20:14:30 linux xinetd[1884]: START: telnet pid=29379 from=::ffff:192.168.1.177 Aug 9 20:17:37 linux xinetd[1884]: START: telnet pid=30948 from=::ffff:192.168.1.177 Aug 9 20:17:57 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 80.00 ms Aug 9 20:24:02 linux mountd[1933]: authenticated mount request from 192.168.1.177:666 for /media (/media) Aug 9 20:24:30 linux xinetd[1884]: EXIT: tftp status=0 pid=26744 duration=1097(sec) Aug 9 20:28:18 linux pulseaudio[2562]: alsa-sink.c: Increasing wakeup watermark to 90.00 ms Aug 9 20:30:05 linux mountd[1933]: authenticated unmount request from 192.168.1.177:890 for /media (/media) Aug 9 20:33:30 linux xinetd[1884]: START: tftp pid=9193 from=192.168.1.200 Aug 9 20:38:40 linux kernel: hello Aug 9 20:38:40 linux kernel: ide-tape: hello jim Aug 9 20:38:40 linux kernel: hello jim2 Aug 9 20:38:40 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:38:40 linux kernel: ide-tape: Retry #0, cmd = 12 Aug 9 20:38:40 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:38:40 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51 Aug 9 20:38:40 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:38:40 linux kernel: ide-tape: Retry #0, cmd = 1A Aug 9 20:38:40 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:38:40 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:38:40 linux kernel: ide-tape: Retry #0, cmd = 1A Aug 9 20:38:40 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:38:40 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC Aug 9 20:39:25 linux kernel: ide-tape: Enter idetape_chrdev_open Aug 9 20:39:25 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:39:25 linux kernel: ide-tape: Retry #0, cmd = 00 Aug 9 20:39:25 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:39:25 linux kernel: ide-tape: Enter ide_tape_read_position Aug 9 20:39:25 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:39:25 linux kernel: ide-tape: Retry #0, cmd = 34 Aug 9 20:39:25 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:39:25 linux kernel: ide-tape: BOP - Yes Aug 9 20:39:25 linux kernel: ide-tape: EOP - No Aug 9 20:39:25 linux kernel: ide-tape: Block Location - 0 Aug 9 20:39:25 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:39:25 linux kernel: ide-tape: Retry #0, cmd = 1A Aug 9 20:39:25 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:39:25 linux kernel: ide-tape: Enter idetape_chrdev_ioctl, cmd=2149346562 Aug 9 20:39:25 linux kernel: ide-tape: Enter ide_tape_read_position Aug 9 20:39:25 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:39:25 linux kernel: ide-tape: Retry #0, cmd = 34 Aug 9 20:39:25 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:39:25 linux kernel: ide-tape: BOP - Yes Aug 9 20:39:25 linux kernel: ide-tape: EOP - No Aug 9 20:39:25 linux kernel: ide-tape: Block Location - 0 Aug 9 20:39:25 linux kernel: ide-tape: Enter idetape_chrdev_release Aug 9 20:39:25 linux kernel: ide-tape: Enter idetape_rewind_tape Aug 9 20:39:25 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:39:25 linux kernel: ide-tape: Retry #0, cmd = 01 Aug 9 20:39:25 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:39:25 linux kernel: ide-tape: Enter idetape_postpone_request Aug 9 20:39:25 linux kernel: ide-tape: Enter ide_tape_read_position Aug 9 20:39:27 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:39:27 linux kernel: ide-tape: Retry #0, cmd = 34 Aug 9 20:39:27 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:39:27 linux kernel: ide-tape: BOP - Yes Aug 9 20:39:27 linux kernel: ide-tape: EOP - No Aug 9 20:39:27 linux kernel: ide-tape: Block Location - 0 Aug 9 20:40:16 linux kernel: hello Aug 9 20:40:16 linux kernel: ide-tape: hello jim Aug 9 20:40:16 linux kernel: hello jim2 Aug 9 20:40:16 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:40:16 linux kernel: ide-tape: Retry #0, cmd = 12 Aug 9 20:40:16 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:40:16 linux kernel: ide-tape: hdd <-> ht0: Seagate STT20000A rev 8A51 Aug 9 20:40:16 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:40:16 linux kernel: ide-tape: Retry #0, cmd = 1A Aug 9 20:40:16 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:40:16 linux kernel: ide-tape: sector: 18446744073709551615, nr_sectors: 0 Aug 9 20:40:16 linux kernel: ide-tape: Retry #0, cmd = 1A Aug 9 20:40:16 linux kernel: ide-tape: Enter ide_tape_callback Aug 9 20:40:16 linux kernel: ide-tape: hdd <-> ht0: 232KBps, 6*54kB buffer, 400ms tDSC -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
