Linux IDE Archive
[Prev Page][Next Page]
- Re: [PATCH 05/13] block: Export I/O topology for block devices and partitions
- NCQ sg_io
- Re: [PATCH] asm-generic: add a dma-mapping.h file
- Re: [PATCH] asm-generic: add a dma-mapping.h file
- Re: [PATCH] asm-generic: add a dma-mapping.h file
- Re: [PATCH 03/13] block: Move queue limits to an embedded struct
- Re: [PATCH 05/13] block: Export I/O topology for block devices and partitions
- Re: [PATCH] asm-generic: add a dma-mapping.h file
- sata_via oops on copying files?
- Re: EP93xx PIO IDE driver proposal
- Re: PATA DMA problem leading to kernel panic on reading movie DVDs
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 11/13] scsi_debug: Add support for physical block exponent and alignment
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCHSET block#for-2.6.31] block: fix fallouts from recent cleanups, take#2
- [PATCHSET block#for-2.6.31] block: fix fallouts from recent cleanups, take#2
- [PATCH 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- [PATCH 1/3] ub: use __blk_end_request_all()
- [PATCH 3/3] bio: always copy back data for copied kernel requests
- Re: [PATCH UPDATED2 block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH UPDATED2 block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: 2.6.30-rc4 kernel
- Re: utku's sata freeze and hard reset problem
- Re: 2.6.30-rc4 kernel
- Re: [PATCH] asm-generic: add a dma-mapping.h file
- Re: [PATCH] asm-generic: add a dma-mapping.h file
- Re: [PATCH] asm-generic: add a dma-mapping.h file
- [PATCH] ata_piix: Add HP Compaq nc6000 to the broken poweroff list
- Re: [PATCH 3/7] ide: merge ide_disk_special() into do_special()
- Re: [PATCH 0/6] drivers/ide Convert printk(KERN_<foo> to pr_<foo>(
- Re: [PATCH 0/6] drivers/ide Convert printk(KERN_<foo> to pr_<foo>(
- Re: [PATCH 0/6] drivers/ide Convert printk(KERN_<foo> to pr_<foo>(
- [PATCH 2/2] drivers/ide/ide-core: Convert pr_<foo> to dev_<foo>
- [PATCH 1/2] drivers/ide/ide-core: Convert printk(KERN_<foo> to pr_<foo>( without KERN_DEBUG
- drivers/ide/ide-core: Convert printk's to pr_<foo> and dev_<foo>
- Re: PATA DMA problem leading to kernel panic on reading movie DVDs
- Re: [PATCH 03/13] block: Move queue limits to an embedded struct
- Re: [PATCH 6/6] drivers/ide: Convert printk(KERN_NOTICE to pr_notice(
- Re: [PATCH 03/13] block: Move queue limits to an embedded struct
- Re: [PATCH 05/13] block: Export I/O topology for block devices and partitions
- Re: [PATCH 05/13] block: Export I/O topology for block devices and partitions
- Re: [PATCH 6/6] drivers/ide: Convert printk(KERN_NOTICE to pr_notice(
- Re: PATA DMA problem leading to kernel panic on reading movie DVDs
- Re: [PATCH 0/6] drivers/ide Convert printk(KERN_<foo> to pr_<foo>(
- Re: [PATCH 0/6] drivers/ide Convert printk(KERN_<foo> to pr_<foo>(
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 0/6] drivers/ide Convert printk(KERN_<foo> to pr_<foo>(
- Re: s2disk hangs with kernel >=2.6.29, SATA, Gigabyte EG45M-DS2H (bisected)
- Re: [PATCH] asm-generic: add a dma-mapping.h file
- Re: s2disk hangs with kernel >=2.6.29, SATA, Gigabyte EG45M-DS2H (bisected)
- From: Bartlomiej Zolnierkiewicz
- Re: s2disk hangs with kernel >=2.6.29, SATA, Gigabyte EG45M-DS2H (bisected)
- Re: [PATCH 0/6] drivers/ide Convert printk(KERN_<foo> to pr_<foo>(
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- Re: [PATCH 6/6] drivers/ide: Convert printk(KERN_NOTICE to pr_notice(
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 6/6] drivers/ide: Convert printk(KERN_NOTICE to pr_notice(
- Re: [PATCH 6/6] drivers/ide: Convert printk(KERN_NOTICE to pr_notice(
- Re: [PATCH 6/6] drivers/ide: Convert printk(KERN_NOTICE to pr_notice(
- Re: 2.9.29.2: ide-tape: panic when probing device at boot
- Re: [PATCH UPDATED2 block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH] asm-generic: add a dma-mapping.h file
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH 6/6] drivers/ide: Convert printk(KERN_NOTICE to pr_notice(
- Re: [PATCH 1/6] drivers/ide: Convert printk(KERN_DEBUG to pr_debug(
- Re: [PATCH] asm-generic: add a dma-mapping.h file
- Re: PATA DMA problem leading to kernel panic on reading movie DVDs
- Re: 2.9.29.2: ide-tape: panic when probing device at boot
- Re: 2.9.29.2: ide-tape: panic when probing device at boot
- Re: [PATCH] asm-generic: add a dma-mapping.h file
- Re: [PATCH 2/6] drivers/ide: Convert printk(KERN_INFO to pr_info(
- [PATCH 6/6] drivers/ide: Convert printk(KERN_NOTICE to pr_notice(
- [PATCH 5/6] drivers/ide: Convert printk(KERN_CONT to pr_cont(
- [PATCH 4/6] drivers/ide: Convert printk(KERN_WARNING to pr_warning(
- [PATCH 3/6] drivers/ide: Convert printk(KERN_ERR to pr_err(
- [PATCH 2/6] drivers/ide: Convert printk(KERN_INFO to pr_info(
- [PATCH 1/6] drivers/ide: Convert printk(KERN_DEBUG to pr_debug(
- utku's sata freeze and hard reset problem
- Re: s2disk hangs with kernel >=2.6.29, SATA, Gigabyte EG45M-DS2H (bisected)
- From: Bartlomiej Zolnierkiewicz
- Re: PATA DMA problem leading to kernel panic on reading movie DVDs
- From: Bartlomiej Zolnierkiewicz
- [PATCH] asm-generic: add a dma-mapping.h file
- Re: PATA DMA problem leading to kernel panic on reading movie DVDs
- Re: PATA DMA problem leading to kernel panic on reading movie DVDs
- Re: PATA DMA problem leading to kernel panic on reading movie DVDs
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: PATA DMA problem leading to kernel panic on reading movie DVDs
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: PATA DMA problem leading to kernel panic on reading movie DVDs
- From: Bartlomiej Zolnierkiewicz
- Re: PATA DMA problem leading to kernel panic on reading movie DVDs
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 3/7] ide: merge ide_disk_special() into do_special()
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 6/7] ide: pass number of ports to ide_host_{alloc,add}()
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 0/15 v2] ide-atapi: remove pc->buf and misc cleanups
- From: Bartlomiej Zolnierkiewicz
- Dropped emails from linux-ide
- [PATCH UPDATED2 block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH UPDATED block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH UPDATED block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH 0/15 v2] ide-atapi: remove pc->buf and misc cleanups
- Re: [PATCH 0/15 v2] ide-atapi: remove pc->buf and misc cleanups
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 0/15 v2] ide-atapi: remove pc->buf and misc cleanups
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH UPDATED block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- [PATCH] [IDE] Add VIA VX855 PCI Device ID
- Re: [PATCH 11/18] swim: dequeue in-flight request
- Re: [PATCH 0/15 v2] ide-atapi: remove pc->buf and misc cleanups
- Re: [PATCH 15/18] z2ram: dequeue in-flight request
- Re: [PATCH 11/18] swim: dequeue in-flight request
- Re: [PATCH 0/15 v2] ide-atapi: remove pc->buf and misc cleanups
- From: Bartlomiej Zolnierkiewicz
- Re: [git pull] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 0/15 v2] ide-atapi: remove pc->buf and misc cleanups
- Re: [git pull] IDE fixes
- Re: [PATCH] sata_sx4: speed up ECC initialization
- From: Alexander Beregalov
- [git pull] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 0/15 v2] ide-atapi: remove pc->buf and misc cleanups
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] icside: register second channel of version 6 PCB
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] sata_sx4: speed up ECC initialization
- Re: [PATCH] Fix ide-tape compilation error.
- Re: [PATCH 11/18] swim: dequeue in-flight request
- Re: [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH 11/18] swim: dequeue in-flight request
- Re: [PATCH] sata_sx4: speed up ECC initialization
- From: Alexander Beregalov
- Re: [PATCH 15/18] z2ram: dequeue in-flight request
- Re: [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [bug#12874] Seagate STT20000A no longer works
- Re: [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH] sata_sx4: speed up ECC initialization
- [PATCH UPDATED block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH] fix sata_sil compilation on non-DMI platforms
- [PATCH 28/30] loongson: fixup for FUJITSU disk
- Re: [PATCH block#for-2.6.31 1/3] ub: use __blk_end_request_all()
- Re: [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: Delay on intialization ide subsystem(most likely)
- ATA ULD (was Re: [PATCH 2/3] scsi: add scsi_device->alt_capacity)
- [git patches] libata fixes and updates
- Re: [PATCH 13/13] libata: Media rotation rate and form factor heuristics
- Re: [PATCH 12/13] libata: Report disk alignment and physical block size
- Re: [PATCH] sata_fsl: Fix the command description of FSL SATA controller
- Re: [PATCH v3] sata_fsl: Fix compile warnings
- Re: [PATCH #sx4] sata_sx4: fixup interrupt handling
- Re: [PATCH] fix sata_sil compilation on non-DMI platforms
- Re: [PATCH block#for-2.6.31 1/3] ub: use __blk_end_request_all()
- Re: [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- Re: EP93xx PIO IDE driver proposal
- [PATCH] icside: register second channel of version 6 PCB
- Re: [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- [PATCH block#for-2.6.31 3/3] bio: always copy back data for copied kernel requests
- [PATCH block#for-2.6.31 2/3] block: set rq->resid_len to blk_rq_bytes() on issue
- [PATCH block#for-2.6.31 1/3] ub: use __blk_end_request_all()
- [Bug 13308] ide-tape boot kernel panic
- [Bug 13308] ide-tape boot kernel panic
- Re: [PATCH 7/7] ide: remove hw_regs_t typedef
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH] fix sata_sil compilation on non-DMI platforms
- [Bug 13308] ide-tape boot kernel panic
- [Bug 13308] ide-tape boot kernel panic
- [Bug 13308] ide-tape boot kernel panic
- [Bug 13308] ide-tape boot kernel panic
- [Bug 13308] ide-tape boot kernel panic
- Re: [PATCH] ata: libata depends on HAS_DMA
- [PATCH 08/15] ide-floppy/ide_floppy_format_unit: use local buffer
- [PATCH 11/15] ide-tape/ide_tape_get_bsize_from_bdesc: use local buffer
- [PATCH 04/15] ide-atapi: add a len-parameter to ide_queue_pc_tail
- [PATCH 05/15] ide-atapi: add a buffer-arg to ide_queue_pc_tail
- [PATCH 10/15] ide-floppy/ide_floppy_get_format_progress: use local sense buffer
- [PATCH 15/15] ide: unify interrupt reason checking
- [PATCH 14/15] ide-cd: use whole request_sense buffer in EH
- [PATCH 13/15] ide-atapi: remove pc->buf
- [PATCH 12/15] ide-tape: fix READ POSITION cmd handling
- [PATCH 09/15] ide-atapi: use local sense buffer
- [PATCH 03/15] ide-atapi: switch to rq->resid_len
- [PATCH 01/15] ide-tape: fix potential fs requests bug
- [PATCH 07/15] ide-floppy/ide_floppy_get_sfrp_bit: use local buffer
- [PATCH 0/15 v2] ide-atapi: remove pc->buf and misc cleanups
- [PATCH 06/15] ide-floppy/ide_floppy_get_flexible_disk_page: use local buffer
- [PATCH 02/15] ide-atapi: switch to blk_rq_bytes() on do_request() path
- [PATCH 12/13] libata: Report disk alignment and physical block size
- [PATCH 13/13] libata: Media rotation rate and form factor heuristics
- [PATCH 01/13] block: Do away with the notion of hardsect_size
- [PATCH 02/13] block: Use accessor functions for queue limits
- [PATCH 10/13] sd: Block limits VPD support
- [PATCH 07/13] block: Deprecate blk_queue_stack_limits
- [PATCH 08/13] sd: Physical block size and alignment support
- [PATCH 05/13] block: Export I/O topology for block devices and partitions
- [PATCH 06/13] MD: Use new topology calls to indicate alignment and I/O sizes
- [PATCH 09/13] sd: Detect non-rotational devices
- [PATCH 11/13] scsi_debug: Add support for physical block exponent and alignment
- [PATCH 03/13] block: Move queue limits to an embedded struct
- [PATCH 04/13] block: Expose stacked device queues in sysfs
- I/O Topology v3
- Re: [PATCH 6/7] ide: pass number of ports to ide_host_{alloc,add}()
- Re: [PATCH 6/7] ide: pass number of ports to ide_host_{alloc,add}()
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 6/7] ide: pass number of ports to ide_host_{alloc,add}()
- Re: [PATCH 5/7] ide: remove chipset field from hw_regs_t
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- [PATCH] sata_fsl: Fix the command description of FSL SATA controller
- Re: [PATCH #sx4] sata_sx4: fixup interrupt handling
- Re: [PATCH 4/7] ide: replace special_t typedef by IDE_SFLAG_* flags
- [Bug 13308] ide-tape boot kernel panic
- [Bug 13308] ide-tape boot kernel panic
- [Bug 13308] New: ide-tape boot kernel panic
- Re: [PATCH 3/7] ide: merge ide_disk_special() into do_special()
- [PATCH v3] sata_fsl: Fix compile warnings
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH #sx4] sata_sx4: fixup interrupt handling
- Re: [PATCH #sx4] sata_sx4: fixup interrupt handling
- Re: [PATCH #sx4] sata_sx4: fixup interrupt handling
- Re: [PATCH #sx4] sata_sx4: fixup interrupt handling
- [PATCH #sx4] sata_sx4: fixup interrupt handling
- Re: [PATCH 0/7] ide: minor improvements/cleanups
- From: Bartlomiej Zolnierkiewicz
- [PATCH v2] sata_fsl: Fix compile warnings
- Re: [PATCH] sata_fsl: Fix compile warnings
- [PATCH] sata_fsl: Fix compile warnings
- Re: [PATCH 3/7] ide: merge ide_disk_special() into do_special()
- [PATCH 7/7] ide: remove hw_regs_t typedef
- From: Bartlomiej Zolnierkiewicz
- [PATCH 6/7] ide: pass number of ports to ide_host_{alloc,add}()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 5/7] ide: remove chipset field from hw_regs_t
- From: Bartlomiej Zolnierkiewicz
- [PATCH 4/7] ide: replace special_t typedef by IDE_SFLAG_* flags
- From: Bartlomiej Zolnierkiewicz
- [PATCH 3/7] ide: merge ide_disk_special() into do_special()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 2/7] ide: BUG() on unknown flags in ide_disk_special()
- From: Bartlomiej Zolnierkiewicz
- [PATCH 1/7] ide: BUG() on unknown requests
- From: Bartlomiej Zolnierkiewicz
- [PATCH 0/7] ide: minor improvements/cleanups
- From: Bartlomiej Zolnierkiewicz
- Re: Help with SATA driver/libata/SCSI subsystem
- stex : invalid tag
- Re: Delay on intialization ide subsystem(most likely)
- From: Bartlomiej Zolnierkiewicz
- [Bug 13286] dma_timer_expiry: DMA status (0x21)
- [Bug 13286] dma_timer_expiry: DMA status (0x21)
- Re: [Bug 13286] dma_timer_expiry: DMA status (0x21)
- From: Bartlomiej Zolnierkiewicz
- [Bug 13286] dma_timer_expiry: DMA status (0x21)
- [Bug 13286] dma_timer_expiry: DMA status (0x21)
- [Bug 13286] dma_timer_expiry: DMA status (0x21)
- Re: Delay on intialization ide subsystem(most likely)
- Re: [PATCH 1/2] libata: Use IGN_SIMPLEX for ALi
- Re: [PATCH 1/2] libata: Use IGN_SIMPLEX for ALi
- Re: EP93xx PIO IDE driver proposal
- Re: [PATCH] libata: Use IGN_SIMPLEX for ALi
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] libata: Use IGN_SIMPLEX for ALi
- [Bug 13286] dma_timer_expiry: DMA status (0x21)
- Re: [PATCH] libata: Use IGN_SIMPLEX for ALi
- From: Bartlomiej Zolnierkiewicz
- Re: [Bug 13286] dma_timer_expiry: DMA status (0x21)
- From: Bartlomiej Zolnierkiewicz
- Re: Delay on intialization ide subsystem(most likely)
- From: Bartlomiej Zolnierkiewicz
- [PATCH 2/2] ata_piix: Enable parallel scan
- [PATCH 1/2] libata: Use IGN_SIMPLEX for ALi
- [PATCH 0/2] Series short description
- [PATCH] libata: Use IGN_SIMPLEX for ALi
- Re: EP93xx PIO IDE driver proposal
- Re: [PATCH] ata: libata depends on HAS_DMA
- [Bug 13297] kernel panic - not syncing : fatel exception in interupt
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH] ata: libata depends on HAS_DMA
- [Bug 13286] dma_timer_expiry: DMA status (0x21)
- Re: 2.6.30-rc4 kernel
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
- Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
- Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
- Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
- Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0
- Re: [patch 1/1] pata-rb532-cf: platform_get_irq() failure ignored
- [patch 1/1] pata-rb532-cf: platform_get_irq() failure ignored
- Re: Delay on intialization ide subsystem(most likely)
- [Bug 13286] dma_timer_expiry: DMA status (0x21)
- Re: [Bug 13286] New: dma_timer_expiry: DMA status (0x21)
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/14] ide-atapi: switch to rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH] fix sata_sil compilation on non-DMI platforms
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH] fix sata_sil compilation on non-DMI platforms
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: SATA disks resets in a md setup
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH 09/14] ide-atapi: use local sense buffer
- [Bug 13286] New: dma_timer_expiry: DMA status (0x21)
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- [PATCH UPDATED #upstream] ahci: misc cleanups for EM stuff
- Re: [PATCH] ata: libata depends on HAS_DMA
- Re: [dm-devel] Re: [PATCH 1/3] block: add alt_size
- Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- [PATCH] ata: libata depends on HAS_DMA
- Re: [PATCH] fix sata_sil compilation on non-DMI platforms
- From: Benjamin Herrenschmidt
- Re: [PATCH] ide: remove driver_data direct access of struct device
- [PATCH] ide: remove driver_data direct access of struct device
- Re: [PATCH] fix sata_sil compilation on non-DMI platforms
- Re: [PATCH] fix sata_sil compilation on non-DMI platforms
- [git patches] libata fixes
- Re: [PATCH #upstream-fixes] libata: clear ering on resume
- Re: [PATCH] libata: fix suspend/resume for ATA SEMB devices
- Re: [PATCH] sata_mv: use new sata phy register settings for new devices
- Re: [PATCH #upstream-fixes] libata: fix attach error handling
- Re: [PATCH 2/4] ata_piix: The Sony TZ90 needs the cable type hardcoding
- Re: [PATCH 1/3 v3] Added support for Designware SATA controller driver
- Re: [PATCH] fix sata_sil compilation on non-DMI platforms
- Re: [PATCH #upstream] ahci: misc cleanups for EM stuff
- Re: [PATCH] fix sata_sil compilation on non-DMI platforms
- Re: [PATCH 0/4] Series short description
- Re: [PATCH 0/4] Series short description
- Re: [PATCH 0/4] Series short description
- Re: [PATCH 0/4] Series short description
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [dm-devel] Re: [PATCH 1/3] block: add alt_size
- Re: EP93xx PIO IDE driver proposal
- Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
- Re: [PATCH 03/14] ide-atapi: switch to rq->resid_len
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 08/11] block: cleanup rq->data_len usages
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: EP93xx PIO IDE driver proposal
- Re: SATA disks resets in a md setup
- Re: [GIT PATCH] block: unify request processing model and implement peek/fetch
- Re: [PATCH 03/14] ide-atapi: switch to rq->resid_len
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: sata_inic162x for help
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [RFC PATCH 0/12] ide-atapi remove pc->buf
- Re: [mmotm 2009-04-30] ata: failed to IDENTIFY
- Re: [PATCH 18/18] block: implement and enforce request peek/start/fetch
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 14/14] ide: unify interrupt reason checking
- From: Bartlomiej Zolnierkiewicz
- Re: [RFC PATCH 0/12] ide-atapi remove pc->buf
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 09/14] ide-atapi: use local sense buffer
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 05/14] ide-atapi: add a buffer-arg to ide_queue_pc_tail
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 03/14] ide-atapi: switch to rq->resid_len
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 02/14] ide-atapi: switch to blk_rq_bytes() on do_request() path
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 03/11] block: add rq->resid_len
- [mmotm 2009-04-30] ata: failed to IDENTIFY
- Re: [GIT PATCH] block: unify request processing model and implement peek/fetch
- Re: [PATCH 2/3] scsi: add scsi_device->alt_capacity
- Re: sata_inic162x for help
- Re: 2.9.29.2: ide-tape: panic when probing device at boot
- Re: 2.9.29.2: ide-tape: panic when probing device at boot
- Re: SATA disks resets in a md setup
- Re: [PATCH 1/3] block: add alt_size
- Re: [PATCH 2/3] scsi: add scsi_device->alt_capacity
- Re: 2.9.29.2: ide-tape: panic when probing device at boot
- Re: [PATCH 2/3] scsi: add scsi_device->alt_capacity
- [PATCH #upstream-fixes] libata: fix attach error handling
- Re: [PATCH 01/18] ide: dequeue in-flight request
- From: Bartlomiej Zolnierkiewicz
- Re: [RFC]hpt366/ide-probe reset drive on probe error.
- From: Bartlomiej Zolnierkiewicz
- Re: 2.9.29.2: ide-tape: panic when probing device at boot
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] libata: fix suspend/resume for ATA SEMB devices
- Re: [PATCH] libata: fix suspend/resume for ATA SEMB devices
- Re: [PATCH 1/3] block: add alt_size
- Re: [PATCH 1/3] block: add alt_size
- Re: [PATCH 01/14] ide-tape: fix potential fs requests bug
- Re: [RFC]hpt366/ide-probe reset drive on probe error.
- Re: [PATCH 01/14] ide-tape: fix potential fs requests bug
- Re: [PATCH 01/14] ide-tape: fix potential fs requests bug
- Re: How to assess PMP register
- Re: [PATCH 01/14] ide-tape: fix potential fs requests bug
- [PATCH 14/14] ide: unify interrupt reason checking
- [PATCH 05/14] ide-atapi: add a buffer-arg to ide_queue_pc_tail
- [PATCH 13/14] ide-cd: use whole request_sense buffer in EH
- [PATCH 09/14] ide-atapi: use local sense buffer
- [PATCH 08/14] ide-floppy/ide_floppy_format_unit: use local buffer
- [PATCH 07/14] ide-floppy/ide_floppy_get_sfrp_bit: use local buffer
- [PATCH 06/14] ide-floppy/ide_floppy_get_flexible_disk_page: use local buffer
- [PATCH 11/14] ide-tape/ide_tape_get_bsize_from_bdesc: use local buffer
- [PATCH 12/14] ide-atapi: remove pc->buf
- [PATCH 10/14] ide-tape: fix READ POSITION cmd handling
- [PATCH 04/14] ide-atapi: add a len-parameter to ide_queue_pc_tail
- [PATCH 02/14] ide-atapi: switch to blk_rq_bytes() on do_request() path
- [PATCH 01/14] ide-tape: fix potential fs requests bug
- [PATCH 03/14] ide-atapi: switch to rq->resid_len
- [RFC PATCH 0/12] ide-atapi remove pc->buf
- Re: SATA disks resets in a md setup
- Re: [PATCH 01/18] ide: dequeue in-flight request
- Re: How to assess PMP register
- Re: How to assess PMP register
- Re: How to assess PMP register
- Re: [PATCH 2/3] scsi: add scsi_device->alt_capacity
- [PATCH 1/3] block: add alt_size
- [PATCH 3/3] libata: export HPA size as alt_size
- [PATCH 2/3] scsi: add scsi_device->alt_capacity
- [GIT PATCH] block,scsi,libata: implement alt_size, take#2
- Re: sata_sil24 EH complete
- Re: [PATCH 16/18] gdrom: dequeue in-flight request
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- Re: [PATCH 16/18] gdrom: dequeue in-flight request
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- Re: [RFC]hpt366/ide-probe reset drive on probe error.
- Re: [RFC]hpt366/ide-probe reset drive on probe error.
- Re: [RFC]hpt366/ide-probe reset drive on probe error.
- Re: sata_sil24 EH complete
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: [RFC]hpt366/ide-probe reset drive on probe error.
- From: Bartlomiej Zolnierkiewicz
- Re: [RFC]hpt366/ide-probe reset drive on probe error.
- From: Bartlomiej Zolnierkiewicz
- Re: [RFC]hpt366/ide-probe reset drive on probe error.
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- Re: [PATCH] ide: remove driver_data direct access of struct device
- From: Bartlomiej Zolnierkiewicz
- Re: EP93xx PIO IDE driver proposal
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ata: Fix the command description of FSL SATA controller
- Re: EP93xx PIO IDE driver proposal
- Re: [PATCH 3/3 v3] Add 4xx SATA dts node documentation
- Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- [PATCH 03/18] mg_disk: dequeue and track in-flight request
- [PATCH 10/18] amiflop: dequeue in-flight request
- [PATCH 14/18] jsflash: dequeue in-flight request
- [PATCH 11/18] swim: dequeue in-flight request
- [PATCH 12/18] xd: dequeue in-flight request
- [PATCH 15/18] z2ram: dequeue in-flight request
- [PATCH 09/18] ps3disk: dequeue in-flight request
- [PATCH 16/18] gdrom: dequeue in-flight request
- [PATCH 17/18] block: convert to dequeueing model (easy ones)
- [PATCH 13/18] mtd_blkdevs: dequeue in-flight request
- [PATCH 07/18] xsysace: dequeue in-flight request
- [PATCH 01/18] ide: dequeue in-flight request
- [PATCH 08/18] paride: dequeue in-flight request
- [PATCH 18/18] block: implement and enforce request peek/start/fetch
- [GIT PATCH] block: unify request processing model and implement peek/fetch
- [PATCH 06/18] swim3: dequeue in-flight request
- [PATCH 05/18] ataflop: dequeue and track in-flight request
- [PATCH 04/18] hd: dequeue and track in-flight request
- [PATCH 02/18] mg_disk: fix queue hang / infinite retry on !fs requests
- Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
- RE: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- RE: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- RE: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- RE: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- [PATCH] ata: Fix the command description of FSL SATA controller
- Re: EP93xx PIO IDE driver proposal
- Re: EP93xx PIO IDE driver proposal
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
- Re: EP93xx PIO IDE driver proposal
- Re: [PATCH] libata: Add multi-count transfer debugging
- Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
- [PATCH 3/3 v3] Add 4xx SATA dts node documentation
- [PATCH 2/3 v3] Added AMCC 460EX Canyonlands SATA support.
- [PATCH 1/3 v3] Added support for Designware SATA controller driver
- Re: [PATCH 1/2] Added support for Designware SATA controller driver
- [PATCH] fix sata_sil compilation on non-DMI platforms
- From: Konstantinos Margaritis
- Re: EP93xx PIO IDE driver proposal
- [PATCH 4/4] ata_piix: Remove stale comment
- [PATCH 3/4] ata_piix: Turn on hotplugging support for older chips
- [PATCH 2/4] ata_piix: The Sony TZ90 needs the cable type hardcoding
- [PATCH 1/4] ata_piix: ICH7 does not support correct MWDMA timings
- [PATCH 0/4] Series short description
- Re: EP93xx PIO IDE driver proposal
- [PATCH] libata: Add multi-count transfer debugging
- From: Carl-Daniel Hailfinger
- Re: How to assess PMP register
- Re: [bug#12874] Seagate STT20000A no longer works
- Re: [PATCH] Fix ide-tape compilation error.
- Re: sata_sil24 EH complete
- Re: sata_sil24 EH complete
- [PATCH] Fix ide-tape compilation error.
- Re: [bug#12874] Seagate STT20000A no longer works
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- [RFC]hpt366/ide-probe reset drive on probe error.
- sata_sil24 EH complete
- Re: EP93xx PIO IDE driver proposal
- [PATCH 2.6.29-stable] cs5536: define dma_sff_read_status() method
- Re: [stable] [PATCH] cs5536: define dma_sff_read_status() method
- Re: [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
- Re: [PATCH 05/11] block: convert to pos and nr_sectors accessors
- Re: [PATCH 04/11] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- Re: [PATCH] sata_mv: use new sata phy register settings for new devices
- Re: How to assess PMP register
- Re: [stable] [PATCH] cs5536: define dma_sff_read_status() method
- Re: [PATCH 05/11] block: convert to pos and nr_sectors accessors
- Re: [PATCH] sata_mv: use new sata phy register settings for new devices
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: [PATCH 08/11] block: cleanup rq->data_len usages
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: [PATCH 04/11] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
- Re: [PATCH 03/11] block: add rq->resid_len
- Re: EP93xx PIO IDE driver proposal
- Re: Kernel Panic 2.6.29.6 AMD Geode (in CS5536 IDE ?)
- Re: Kernel Panic 2.6.29.6 AMD Geode (in CS5536 IDE ?)
- From: Bartlomiej Zolnierkiewicz
- [PATCH 05/11] block: convert to pos and nr_sectors accessors
- [PATCH 02/11] ide-tape: don't initialize rq->sector for rw requests
- [GIT PATCH] block,scsi,ide: unify sector and data_len, take#2
- [PATCH 08/11] block: cleanup rq->data_len usages
- Re: Kernel Panic 2.6.29.6 AMD Geode (in CS5536 IDE ?)
- [PATCH 04/11] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
- [PATCH 03/11] block: add rq->resid_len
- [PATCH 01/11] nbd: don't clear rq->sector and nr_sectors unnecessarily
- [PATCH 07/11] block: drop request->hard_* and *nr_sectors
- [PATCH 10/11] block: hide request sector and data_len
- [PATCH 06/11] ide: convert to rq pos and nr_sectors accessors
- [PATCH 11/11] block: blk_rq_[cur_]_{sectors|bytes}() usage cleanup
- [PATCH 09/11] ide: cleanup rq->data_len usages
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- Re: [PATCH 07/10] block: drop request->hard_* and *nr_sectors
- Re: How to assess PMP register
- Re: [PATCH 08/10] block: cleanup rq->data_len usages
- Re: dm-multipath completely breaks AHCI driver
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: dm-multipath completely breaks AHCI driver
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- From: Bartlomiej Zolnierkiewicz
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: New TRIM/UNMAP tree published (2009-05-02)
- Re: [PATCH 08/10] block: cleanup rq->data_len usages
- Re: New TRIM/UNMAP tree published (2009-05-02)
- dm-multipath completely breaks AHCI driver
- New TRIM/UNMAP tree published (2009-05-02)
- Re: [PATCH 1/5] Block: Discard may need to allocate pages
- Re: [GIT PATCH] block,scsi,ide: unify sector and data_len
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: [PATCH 08/10] block: cleanup rq->data_len usages
- Re: [PATCH 08/10] block: cleanup rq->data_len usages
- Re: [PATCH 1/2] Added support for Designware SATA controller driver
- Re: [PATCH 1/2] Added support for Designware SATA controller driver
- Re: [PATCH 2/2] Added AMCC 460EX Canyonlands SATA support.
- Re: [PATCH 1/2] Added support for Designware SATA controller driver
- [PATCH 0/2] Added support for Designware SATA controller driver
- [PATCH 2/2] Added AMCC 460EX Canyonlands SATA support.
- [PATCH 1/2] Added support for Designware SATA controller driver
- [PATCH 3/3] ide-atapi: switch to rq->resid_len
- [PATCH 2/3] ide-atapi: switch to blk_rq_bytes() on do_request() path
- [RFC PATCH 0/3] ide-atapi cleanups
- [PATCH 1/3] ide-tape: fix potential fs requests bug
- Re: [GIT PATCH] block,scsi,ide: unify sector and data_len
- Re: [PATCH 08/10] block: cleanup rq->data_len usages
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: [PATCH 1/2] Add support for Designware SATA controller driver
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: [PATCH 1/2] Add support for Designware SATA controller driver
- From: Benjamin Herrenschmidt
- Re: [PATCH 1/2] Add support for Designware SATA controller driver
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: Implementing NVMHCI...
- Re: Implementing NVMHCI...
- Re: How to assess PMP register
- [PATCH] ide: remove driver_data direct access of struct device
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
- [git pull] IDE fix
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] alim15x3: Remove historical hacks, re-enable init_hwif for PowerPC
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
- From: Bartlomiej Zolnierkiewicz
- Re: How to assess PMP register
- Re: [GIT PATCH] block,scsi,ide: unify sector and data_len
- From: Bartlomiej Zolnierkiewicz
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- From: Henrique de Moraes Holschuh
- Re: [PATCH 08/10] block: cleanup rq->data_len usages
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: [PATCH 08/10] block: cleanup rq->data_len usages
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: [PATCH 07/10] block: drop request->hard_* and *nr_sectors
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: [PATCH 03/10] block: add rq->resid_len
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: [PATCH 03/10] block: add rq->resid_len
- Re: [PATCH 03/10] block: add rq->resid_len
- Re: [PATCH 03/10] block: add rq->resid_len
- Re: [PATCH] m68k: Atari - leave out spurious request_irq for Falcon IDE
- Re: [PATCH 02/10] ide-tape: don't initialize rq->sector for rw requests
- Re: No NCQ support on X61s Ultrabay? (Intel ICH8 SATA controller question)
- Re: [PATCH 03/10] block: add rq->resid_len
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- How to assess PMP register
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- Re: [PATCHSET] block,scsi,libata: implement alt_size
- Re: [PATCH 1/2] Add support for Designware SATA controller driver
- Re: [PATCH 1/2] Add support for Designware SATA controller driver
- [PATCH 1/2] Add support for Designware SATA controller driver
- Re: Delay on intialization ide subsystem(most likely)
- Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
- Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
- Re: [PATCH 03/10] block: add rq->resid_len
- Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
- Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
- Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
- Re: [PATCH 05/10] block: convert to pos and nr_sectors accessors
- Re: [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
- [PATCH 03/10] block: add rq->resid_len
- [PATCH 06/10] ide: convert to rq pos and nr_sectors accessors
- [GIT PATCH] block,scsi,ide: unify sector and data_len
- [PATCH 04/10] block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones
- [PATCH 10/10] block: hide request sector and data_len
- [PATCH 08/10] block: cleanup rq->data_len usages
- [PATCH 05/10] block: convert to pos and nr_sectors accessors
- [PATCH 07/10] block: drop request->hard_* and *nr_sectors
- [PATCH 02/10] ide-tape: don't initialize rq->sector for rw requests
- [PATCH 01/10] nbd: don't clear rq->sector and nr_sectors unnecessarily
- [PATCH 09/10] ide: cleanup rq->data_len usages
- Re: [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
- Re: ATA taskfile register returns 0xd0 on resume.
- Re: ATA taskfile register returns 0xd0 on resume.
- Re: [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
- [PATCH] ide-cd: fix REQ_QUIET tests in cdrom_decode_status
- Re: [PATCH] ata_piix: ICH7 does not support correct MWDMA timings
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/3] mg_disk: fix CONFIG_LBD=y warning
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/3] mg_disk: fix CONFIG_LBD=y warning
- Re: [PATCH 2/3] mg_disk: fix CONFIG_LBD=y warning
- From: Bartlomiej Zolnierkiewicz
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]