Hi Tejun, The patch works as you intended it. There is still some timeout, but it is not more than 2-3 seconds which is a vast improvement. Attached is the new dmesg. Thank you. On Mon, Jun 29, 2009 at 12:20 PM, Tejun Heo<htejun@xxxxxxxxx> wrote: > Marc Bowes wrote: >> Ok. Just keep me informed :) > > Please test the attached patch and report the resulting boot log. Oh > and please turn on CONFIG_PRINTK_TIME. > > Thanks. > > -- > tejun >
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.29-gentoo-r5 (root@saidin) (gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) ) #11 SMP Wed Jul 1 09:57:24 SAST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfeb0000 (usable) [ 0.000000] BIOS-e820: 00000000cfeb0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xcfeb0 max_arch_pfn = 0x100000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000 [ 0.000000] ACPI: RSDP 000F7910, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT CFEE3040, 0034 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP CFEE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT CFEE3180, 4C52 (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS CFEB0000, 0040 [ 0.000000] ACPI: MCFG CFEE7FC0, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC CFEE7E40, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT CFEE89A0, 03AB (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2442MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00008000 - 0000ee80 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 0001692574] TEXT DATA BSS ==> [0001000000 - 0001692574] [ 0.000000] #4 [0001693000 - 000169a000] INIT_PG_TABLE ==> [0001693000 - 000169a000] [ 0.000000] #5 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x000cfeb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cfeb0 [ 0.000000] On node 0 totalpages: 851534 [ 0.000000] free_area_init_node: node 0, pgdat c15543c0, node_mem_map c169a000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3966 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4886 pages used for memmap [ 0.000000] HighMem zone: 620444 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844880 [ 0.000000] Kernel command line: root=/dev/sda3 video=uvesafb:mtrr:3,ywrap,1680x1050-24@60 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2400.160 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000999] Memory: 3370684k/3406528k available (3786k kernel code, 34496k reserved, 2032k data, 348k init, 2501320k highmem) [ 0.000999] virtual kernel memory layout: [ 0.000999] fixmap : 0xffc79000 - 0xfffff000 (3608 kB) [ 0.000999] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000999] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000999] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000999] .init : 0xc15b6000 - 0xc160d000 ( 348 kB) [ 0.000999] .data : 0xc13b2923 - 0xc15aeb80 (2032 kB) [ 0.000999] .text : 0xc1000000 - 0xc13b2923 (3786 kB) [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.001010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.32 BogoMIPS (lpj=2400160) [ 0.001300] Security Framework initialized [ 0.001440] Mount-cache hash table entries: 512 [ 0.001694] Initializing cgroup subsys ns [ 0.001827] Initializing cgroup subsys cpuacct [ 0.001973] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.002123] CPU: L2 cache: 4096K [ 0.002251] CPU: Physical Processor ID: 0 [ 0.002382] CPU: Processor Core ID: 0 [ 0.002513] using mwait in idle threads. [ 0.002650] Checking 'hlt' instruction... OK. [ 0.006595] ACPI: Core revision 20081204 [ 0.014396] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024545] CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 0.024996] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4799.29 BogoMIPS (lpj=2399646) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.096351] CPU1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 0.097160] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.098119] Booting processor 2 APIC 0x3 ip 0x6000 [ 0.000999] Initializing CPU#2 [ 0.000999] Calibrating delay using timer specific routine.. 4799.29 BogoMIPS (lpj=2399648) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 3 [ 0.000999] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.171384] CPU2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 0.172147] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.173108] Booting processor 3 APIC 0x2 ip 0x6000 [ 0.000999] Initializing CPU#3 [ 0.000999] Calibrating delay using timer specific routine.. 4799.30 BogoMIPS (lpj=2399650) [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 4096K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 2 [ 0.000999] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.246320] CPU3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 0.247137] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.248028] Brought up 4 CPUs [ 0.248175] Total of 4 processors activated (19198.20 BogoMIPS). [ 0.249036] khelper used greatest stack depth: 7128 bytes left [ 0.249111] net_namespace: 556 bytes [ 0.250069] NET: Registered protocol family 16 [ 0.250227] ACPI: bus type pci registered [ 0.250973] dca service started, version 1.8 [ 0.251154] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.251154] PCI: MCFG area at e0000000 reserved in E820 [ 0.251276] PCI: Using MMCONFIG for extended config space [ 0.251413] PCI: Using configuration type 1 for base access [ 0.258003] bio: create slab <bio-0> at 0 [ 0.259177] ACPI: EC: Look up EC in DSDT [ 0.264467] ACPI: Interpreter enabled [ 0.264617] ACPI: (supports S0 S3 S5) [ 0.265113] ACPI: Using IOAPIC for interrupt routing [ 0.271077] ACPI: No dock devices found. [ 0.271223] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.271399] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.271399] pci 0000:00:01.0: PME# disabled [ 0.272013] pci 0000:00:1a.0: reg 20 io port: [0xe100-0xe11f] [ 0.272076] pci 0000:00:1a.1: reg 20 io port: [0xe200-0xe21f] [ 0.272139] pci 0000:00:1a.2: reg 20 io port: [0xe000-0xe01f] [ 0.272192] pci 0000:00:1a.7: reg 10 32bit mmio: [0xec605000-0xec6053ff] [ 0.272267] pci 0000:00:1b.0: reg 10 64bit mmio: [0xec600000-0xec603fff] [ 0.272312] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.272455] pci 0000:00:1b.0: PME# disabled [ 0.272638] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.272790] pci 0000:00:1c.0: PME# disabled [ 0.273013] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.273961] pci 0000:00:1c.4: PME# disabled [ 0.274998] pci 0000:00:1d.0: reg 20 io port: [0xe300-0xe31f] [ 0.275061] pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f] [ 0.275124] pci 0000:00:1d.2: reg 20 io port: [0xe500-0xe51f] [ 0.275177] pci 0000:00:1d.7: reg 10 32bit mmio: [0xec604000-0xec6043ff] [ 0.275333] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.275564] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.275708] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.275960] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.276189] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b) [ 0.276455] pci 0000:00:1f.2: reg 10 io port: [0xe600-0xe607] [ 0.276460] pci 0000:00:1f.2: reg 14 io port: [0xe700-0xe703] [ 0.276465] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807] [ 0.276470] pci 0000:00:1f.2: reg 1c io port: [0xe900-0xe903] [ 0.276475] pci 0000:00:1f.2: reg 20 io port: [0xea00-0xea1f] [ 0.276480] pci 0000:00:1f.2: reg 24 32bit mmio: [0xec606000-0xec6067ff] [ 0.276526] pci 0000:00:1f.2: PME# supported from D3hot [ 0.276664] pci 0000:00:1f.2: PME# disabled [ 0.276826] pci 0000:00:1f.3: reg 10 64bit mmio: [0xec607000-0xec6070ff] [ 0.276838] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.276894] pci 0000:01:00.0: reg 10 32bit mmio: [0xe6000000-0xe6ffffff] [ 0.276965] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.276972] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe4000000-0xe5ffffff] [ 0.276977] pci 0000:01:00.0: reg 24 io port: [0x8000-0x807f] [ 0.276982] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.277019] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.277310] pci 0000:00:01.0: bridge io port: [0x8000-0x8fff] [ 0.277313] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe7ffffff] [ 0.277317] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.277385] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.277529] pci 0000:02:00.0: PME# disabled [ 0.279064] pci 0000:00:1c.0: bridge io port: [0x9000-0xcfff] [ 0.279068] pci 0000:00:1c.0: bridge 32bit mmio: [0xe8000000-0xebffffff] [ 0.279073] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xec000000-0xec3fffff] [ 0.279148] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.279290] pci 0000:03:01.0: PME# disabled [ 0.279498] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold [ 0.279642] pci 0000:03:02.0: PME# disabled [ 0.279849] pci 0000:03:03.0: PME# supported from D0 D3hot D3cold [ 0.279961] pci 0000:03:03.0: PME# disabled [ 0.280170] pci 0000:03:04.0: PME# supported from D0 D3hot D3cold [ 0.280313] pci 0000:03:04.0: PME# disabled [ 0.280520] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold [ 0.280663] pci 0000:03:05.0: PME# disabled [ 0.280889] pci 0000:03:06.0: PME# supported from D0 D3hot D3cold [ 0.280961] pci 0000:03:06.0: PME# disabled [ 0.281143] pci 0000:02:00.0: bridge io port: [0x9000-0xcfff] [ 0.281148] pci 0000:02:00.0: bridge 32bit mmio: [0xe8000000-0xebffffff] [ 0.281156] pci 0000:02:00.0: bridge 64bit mmio pref: [0xec000000-0xec3fffff] [ 0.281257] pci 0000:05:00.0: reg 10 io port: [0x9000-0x90ff] [ 0.281280] pci 0000:05:00.0: reg 18 64bit mmio: [0xec010000-0xec010fff] [ 0.281296] pci 0000:05:00.0: reg 20 64bit mmio: [0xec000000-0xec00ffff] [ 0.281305] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.281367] pci 0000:05:00.0: supports D1 D2 [ 0.281368] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.281514] pci 0000:05:00.0: PME# disabled [ 0.283128] pci 0000:03:02.0: bridge io port: [0x9000-0x9fff] [ 0.283133] pci 0000:03:02.0: bridge 32bit mmio: [0xe8000000-0xe8ffffff] [ 0.283141] pci 0000:03:02.0: bridge 64bit mmio pref: [0xec000000-0xec0fffff] [ 0.283182] pci 0000:06:00.0: reg 10 io port: [0xa000-0xa0ff] [ 0.283206] pci 0000:06:00.0: reg 18 64bit mmio: [0xec110000-0xec110fff] [ 0.283222] pci 0000:06:00.0: reg 20 64bit mmio: [0xec100000-0xec10ffff] [ 0.283231] pci 0000:06:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.283293] pci 0000:06:00.0: supports D1 D2 [ 0.283295] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.283441] pci 0000:06:00.0: PME# disabled [ 0.285130] pci 0000:03:03.0: bridge io port: [0xa000-0xafff] [ 0.285135] pci 0000:03:03.0: bridge 32bit mmio: [0xe9000000-0xe9ffffff] [ 0.285143] pci 0000:03:03.0: bridge 64bit mmio pref: [0xec100000-0xec1fffff] [ 0.285183] pci 0000:07:00.0: reg 10 io port: [0xb000-0xb0ff] [ 0.285207] pci 0000:07:00.0: reg 18 64bit mmio: [0xec210000-0xec210fff] [ 0.285223] pci 0000:07:00.0: reg 20 64bit mmio: [0xec200000-0xec20ffff] [ 0.285232] pci 0000:07:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.285293] pci 0000:07:00.0: supports D1 D2 [ 0.285295] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.285440] pci 0000:07:00.0: PME# disabled [ 0.287119] pci 0000:03:04.0: bridge io port: [0xb000-0xbfff] [ 0.287132] pci 0000:03:04.0: bridge 32bit mmio: [0xea000000-0xeaffffff] [ 0.287140] pci 0000:03:04.0: bridge 64bit mmio pref: [0xec200000-0xec2fffff] [ 0.287181] pci 0000:08:00.0: reg 10 io port: [0xc000-0xc0ff] [ 0.287204] pci 0000:08:00.0: reg 18 64bit mmio: [0xec310000-0xec310fff] [ 0.287221] pci 0000:08:00.0: reg 20 64bit mmio: [0xec300000-0xec30ffff] [ 0.287230] pci 0000:08:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.287291] pci 0000:08:00.0: supports D1 D2 [ 0.287293] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.287439] pci 0000:08:00.0: PME# disabled [ 0.289109] pci 0000:03:05.0: bridge io port: [0xc000-0xcfff] [ 0.289114] pci 0000:03:05.0: bridge 32bit mmio: [0xeb000000-0xebffffff] [ 0.289132] pci 0000:03:05.0: bridge 64bit mmio pref: [0xec300000-0xec3fffff] [ 0.289328] pci 0000:0a:00.0: reg 24 32bit mmio: [0xec400000-0xec401fff] [ 0.289375] pci 0000:0a:00.0: PME# supported from D3hot [ 0.289514] pci 0000:0a:00.0: PME# disabled [ 0.289679] pci 0000:0a:00.1: reg 10 io port: [0xd000-0xd007] [ 0.289687] pci 0000:0a:00.1: reg 14 io port: [0xd100-0xd103] [ 0.289695] pci 0000:0a:00.1: reg 18 io port: [0xd200-0xd207] [ 0.289704] pci 0000:0a:00.1: reg 1c io port: [0xd300-0xd303] [ 0.289712] pci 0000:0a:00.1: reg 20 io port: [0xd400-0xd40f] [ 0.289792] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.290058] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] [ 0.290061] pci 0000:00:1c.4: bridge 32bit mmio: [0xec400000-0xec4fffff] [ 0.290113] pci 0000:0b:06.0: reg 10 32bit mmio: [0xec504000-0xec5047ff] [ 0.290120] pci 0000:0b:06.0: reg 14 32bit mmio: [0xec500000-0xec503fff] [ 0.290170] pci 0000:0b:06.0: supports D1 D2 [ 0.290172] pci 0000:0b:06.0: PME# supported from D0 D1 D2 D3hot [ 0.290314] pci 0000:0b:06.0: PME# disabled [ 0.290479] pci 0000:00:1e.0: transparent bridge [ 0.290615] pci 0000:00:1e.0: bridge 32bit mmio: [0xec500000-0xec5fffff] [ 0.290634] pci_bus 0000:00: on NUMA node 0 [ 0.290643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.290831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.290964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.291028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.309056] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.309808] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.310574] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.311343] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.312051] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.312960] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.313717] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.314461] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.315139] SCSI subsystem initialized [ 0.316001] libata version 3.00 loaded. [ 0.316001] usbcore: registered new interface driver usbfs [ 0.316146] usbcore: registered new interface driver hub [ 0.316146] usbcore: registered new device driver usb [ 0.316995] PCI: Using ACPI for IRQ routing [ 0.327085] pnp: PnP ACPI init [ 0.327231] ACPI: bus type pnp registered [ 0.330538] pnp: PnP ACPI: found 12 devices [ 0.330691] ACPI: ACPI bus type pnp unregistered [ 0.330850] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.330992] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.331133] system 00:01: ioport range 0x800-0x805 has been reserved [ 0.331275] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.331421] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.331563] system 00:01: ioport range 0x4c0-0x4ff could not be reserved [ 0.331720] system 00:08: ioport range 0x400-0x4bf could not be reserved [ 0.331883] system 00:09: iomem range 0xe0000000-0xe3ffffff has been reserved [ 0.332030] system 00:0a: iomem range 0xd2000-0xd3fff has been reserved [ 0.332174] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [ 0.332321] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.332465] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.332610] system 00:0a: iomem range 0xcfeb0000-0xcfefffff could not be reserved [ 0.332859] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.333002] system 00:0a: iomem range 0x100000-0xcfeaffff could not be reserved [ 0.333229] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.333378] system 00:0a: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.333524] system 00:0a: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.333670] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.333833] system 00:0a: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.333988] system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved [ 0.334133] system 00:0a: iomem range 0xe0000-0xeffff has been reserved [ 0.368989] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.369129] pci 0000:00:01.0: IO window: 0x8000-0x8fff [ 0.369290] pci 0000:00:01.0: MEM window: 0xe4000000-0xe7ffffff [ 0.369444] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.369675] pci 0000:03:01.0: PCI bridge, secondary bus 0000:04 [ 0.369813] pci 0000:03:01.0: IO window: disabled [ 0.369952] pci 0000:03:01.0: MEM window: disabled [ 0.370090] pci 0000:03:01.0: PREFETCH window: disabled [ 0.370248] pci 0000:03:02.0: PCI bridge, secondary bus 0000:05 [ 0.370410] pci 0000:03:02.0: IO window: 0x9000-0x9fff [ 0.370551] pci 0000:03:02.0: MEM window: 0xe8000000-0xe8ffffff [ 0.370694] pci 0000:03:02.0: PREFETCH window: 0x000000ec000000-0x000000ec0fffff [ 0.370930] pci 0000:03:03.0: PCI bridge, secondary bus 0000:06 [ 0.371070] pci 0000:03:03.0: IO window: 0xa000-0xafff [ 0.371211] pci 0000:03:03.0: MEM window: 0xe9000000-0xe9ffffff [ 0.371387] pci 0000:03:03.0: PREFETCH window: 0x000000ec100000-0x000000ec1fffff [ 0.371621] pci 0000:03:04.0: PCI bridge, secondary bus 0000:07 [ 0.371762] pci 0000:03:04.0: IO window: 0xb000-0xbfff [ 0.371904] pci 0000:03:04.0: MEM window: 0xea000000-0xeaffffff [ 0.372047] pci 0000:03:04.0: PREFETCH window: 0x000000ec200000-0x000000ec2fffff [ 0.372282] pci 0000:03:05.0: PCI bridge, secondary bus 0000:08 [ 0.372456] pci 0000:03:05.0: IO window: 0xc000-0xcfff [ 0.372597] pci 0000:03:05.0: MEM window: 0xeb000000-0xebffffff [ 0.372741] pci 0000:03:05.0: PREFETCH window: 0x000000ec300000-0x000000ec3fffff [ 0.372977] pci 0000:03:06.0: PCI bridge, secondary bus 0000:09 [ 0.373115] pci 0000:03:06.0: IO window: disabled [ 0.373255] pci 0000:03:06.0: MEM window: disabled [ 0.373416] pci 0000:03:06.0: PREFETCH window: disabled [ 0.373568] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 [ 0.373709] pci 0000:02:00.0: IO window: 0x9000-0xcfff [ 0.373850] pci 0000:02:00.0: MEM window: 0xe8000000-0xebffffff [ 0.373994] pci 0000:02:00.0: PREFETCH window: 0x000000ec000000-0x000000ec3fffff [ 0.374228] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.374381] pci 0000:00:1c.0: IO window: 0x9000-0xcfff [ 0.374539] pci 0000:00:1c.0: MEM window: 0xe8000000-0xebffffff [ 0.374682] pci 0000:00:1c.0: PREFETCH window: 0x000000ec000000-0x000000ec3fffff [ 0.374913] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0a [ 0.375053] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 0.375193] pci 0000:00:1c.4: MEM window: 0xec400000-0xec4fffff [ 0.375338] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.375496] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b [ 0.375642] pci 0000:00:1e.0: IO window: disabled [ 0.375779] pci 0000:00:1e.0: MEM window: 0xec500000-0xec5fffff [ 0.375921] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.376066] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.376211] pci 0000:00:01.0: setting latency timer to 64 [ 0.376217] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.376365] pci 0000:00:1c.0: setting latency timer to 64 [ 0.376377] pci 0000:02:00.0: setting latency timer to 64 [ 0.376389] pci 0000:03:01.0: setting latency timer to 64 [ 0.376400] pci 0000:03:02.0: setting latency timer to 64 [ 0.376411] pci 0000:03:03.0: setting latency timer to 64 [ 0.376422] pci 0000:03:04.0: setting latency timer to 64 [ 0.376434] pci 0000:03:05.0: setting latency timer to 64 [ 0.376445] pci 0000:03:06.0: setting latency timer to 64 [ 0.376462] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.376637] pci 0000:00:1c.4: setting latency timer to 64 [ 0.376642] pci 0000:00:1e.0: setting latency timer to 64 [ 0.376646] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.376648] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.376650] pci_bus 0000:01: resource 0 io: [0x8000-0x8fff] [ 0.376653] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe7ffffff] [ 0.376655] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff] [ 0.376658] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 0.376661] pci_bus 0000:02: resource 0 io: [0x9000-0xcfff] [ 0.376663] pci_bus 0000:02: resource 1 mem: [0xe8000000-0xebffffff] [ 0.376666] pci_bus 0000:02: resource 2 mem: [0xec000000-0xec3fffff] [ 0.376669] pci_bus 0000:02: resource 3 mem: [0x0-0x0] [ 0.376671] pci_bus 0000:03: resource 0 io: [0x9000-0xcfff] [ 0.376673] pci_bus 0000:03: resource 1 mem: [0xe8000000-0xebffffff] [ 0.376676] pci_bus 0000:03: resource 2 mem: [0xec000000-0xec3fffff] [ 0.376678] pci_bus 0000:03: resource 3 mem: [0x0-0x0] [ 0.376680] pci_bus 0000:04: resource 0 mem: [0x0-0x0] [ 0.376682] pci_bus 0000:04: resource 1 mem: [0x0-0x0] [ 0.376683] pci_bus 0000:04: resource 2 mem: [0x0-0x0] [ 0.376685] pci_bus 0000:04: resource 3 mem: [0x0-0x0] [ 0.376687] pci_bus 0000:05: resource 0 io: [0x9000-0x9fff] [ 0.376689] pci_bus 0000:05: resource 1 mem: [0xe8000000-0xe8ffffff] [ 0.376691] pci_bus 0000:05: resource 2 mem: [0xec000000-0xec0fffff] [ 0.376693] pci_bus 0000:05: resource 3 mem: [0x0-0x0] [ 0.376696] pci_bus 0000:06: resource 0 io: [0xa000-0xafff] [ 0.376698] pci_bus 0000:06: resource 1 mem: [0xe9000000-0xe9ffffff] [ 0.376700] pci_bus 0000:06: resource 2 mem: [0xec100000-0xec1fffff] [ 0.376702] pci_bus 0000:06: resource 3 mem: [0x0-0x0] [ 0.376704] pci_bus 0000:07: resource 0 io: [0xb000-0xbfff] [ 0.376706] pci_bus 0000:07: resource 1 mem: [0xea000000-0xeaffffff] [ 0.376708] pci_bus 0000:07: resource 2 mem: [0xec200000-0xec2fffff] [ 0.376710] pci_bus 0000:07: resource 3 mem: [0x0-0x0] [ 0.376712] pci_bus 0000:08: resource 0 io: [0xc000-0xcfff] [ 0.376714] pci_bus 0000:08: resource 1 mem: [0xeb000000-0xebffffff] [ 0.376716] pci_bus 0000:08: resource 2 mem: [0xec300000-0xec3fffff] [ 0.376718] pci_bus 0000:08: resource 3 mem: [0x0-0x0] [ 0.376720] pci_bus 0000:09: resource 0 mem: [0x0-0x0] [ 0.376722] pci_bus 0000:09: resource 1 mem: [0x0-0x0] [ 0.376724] pci_bus 0000:09: resource 2 mem: [0x0-0x0] [ 0.376726] pci_bus 0000:09: resource 3 mem: [0x0-0x0] [ 0.376728] pci_bus 0000:0a: resource 0 io: [0xd000-0xdfff] [ 0.376730] pci_bus 0000:0a: resource 1 mem: [0xec400000-0xec4fffff] [ 0.376733] pci_bus 0000:0a: resource 2 mem: [0x0-0x0] [ 0.376735] pci_bus 0000:0a: resource 3 mem: [0x0-0x0] [ 0.376738] pci_bus 0000:0b: resource 0 mem: [0x0-0x0] [ 0.376740] pci_bus 0000:0b: resource 1 mem: [0xec500000-0xec5fffff] [ 0.376743] pci_bus 0000:0b: resource 2 mem: [0x0-0x0] [ 0.376745] pci_bus 0000:0b: resource 3 io: [0x00-0xffff] [ 0.376748] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffff] [ 0.376774] NET: Registered protocol family 2 [ 0.388598] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.388961] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.389421] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.389689] TCP: Hash tables configured (established 131072 bind 65536) [ 0.389850] TCP reno registered [ 0.392666] NET: Registered protocol family 1 [ 0.395577] audit: initializing netlink socket (disabled) [ 0.395753] type=2000 audit(1246442346.394:1): initialized [ 0.401248] highmem bounce pool size: 64 pages [ 0.401404] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.407196] fuse init (API version 7.11) [ 0.407595] msgmni has been set to 1699 [ 0.408043] cryptomgr_test used greatest stack depth: 7096 bytes left [ 0.408492] cryptomgr_test used greatest stack depth: 6836 bytes left [ 0.408516] alg: No test for stdrng (krng) [ 0.408905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.409134] io scheduler noop registered [ 0.409275] io scheduler cfq registered (default) [ 0.409589] pci 0000:01:00.0: Boot video device [ 0.409765] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.409820] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.409997] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.410044] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.410304] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.410351] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.410621] pcieport-driver 0000:02:00.0: setting latency timer to 64 [ 0.410901] pcieport-driver 0000:03:01.0: setting latency timer to 64 [ 0.411004] pcieport-driver 0000:03:01.0: irq 27 for MSI/MSI-X [ 0.411239] pcieport-driver 0000:03:02.0: setting latency timer to 64 [ 0.411330] pcieport-driver 0000:03:02.0: irq 28 for MSI/MSI-X [ 0.411550] pcieport-driver 0000:03:03.0: setting latency timer to 64 [ 0.411642] pcieport-driver 0000:03:03.0: irq 29 for MSI/MSI-X [ 0.411865] pcieport-driver 0000:03:04.0: setting latency timer to 64 [ 0.411960] pcieport-driver 0000:03:04.0: irq 30 for MSI/MSI-X [ 0.412202] pcieport-driver 0000:03:05.0: setting latency timer to 64 [ 0.412293] pcieport-driver 0000:03:05.0: irq 31 for MSI/MSI-X [ 0.412515] pcieport-driver 0000:03:06.0: setting latency timer to 64 [ 0.412606] pcieport-driver 0000:03:06.0: irq 32 for MSI/MSI-X [ 0.417982] Non-volatile memory driver v1.3 [ 0.418832] v86d used greatest stack depth: 6644 bytes left [ 0.446947] uvesafb: NVIDIA Corporation, G80 Board - p355h00 , Chip Rev , OEM: NVIDIA, VBE v3.0 [ 0.468205] uvesafb: protected mode interface info at c000:aa00 [ 0.468356] uvesafb: pmi: set display start = c00caa63, set palette = c00caabe [ 0.468623] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.533914] uvesafb: VBIOS/hardware doesn't support DDC transfers [ 0.534067] uvesafb: no monitor limits have been set, default refresh rate will be used [ 0.534467] uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=6241 [ 0.536642] mtrr: type mismatch for e5000000,800000 old: write-back new: write-combining [ 0.536873] mtrr: type mismatch for e5000000,400000 old: write-back new: write-combining [ 0.537105] mtrr: type mismatch for e5000000,200000 old: write-back new: write-combining [ 0.537355] mtrr: type mismatch for e5000000,100000 old: write-back new: write-combining [ 0.537590] mtrr: type mismatch for e5000000,80000 old: write-back new: write-combining [ 0.537822] mtrr: type mismatch for e5000000,40000 old: write-back new: write-combining [ 0.538053] mtrr: type mismatch for e5000000,20000 old: write-back new: write-combining [ 0.538309] mtrr: type mismatch for e5000000,10000 old: write-back new: write-combining [ 0.538543] mtrr: type mismatch for e5000000,8000 old: write-back new: write-combining [ 0.538773] mtrr: type mismatch for e5000000,4000 old: write-back new: write-combining [ 0.539004] mtrr: type mismatch for e5000000,2000 old: write-back new: write-combining [ 0.539246] mtrr: type mismatch for e5000000,1000 old: write-back new: write-combining [ 0.873187] Switched to high resolution mode on CPU 3 [ 0.873222] Switched to high resolution mode on CPU 1 [ 0.873291] Switched to high resolution mode on CPU 2 [ 0.873375] Switched to high resolution mode on CPU 0 [ 0.997906] Console: switching to colour frame buffer device 210x65 [ 1.013436] uvesafb: framebuffer at 0xe5000000, mapped to 0xf7c80000, using 10240k, total 14336k [ 1.013540] fb0: VESA VGA frame buffer device [ 1.014213] ACPI: SSDT CFEE80C0, 022A (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 1.014590] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 1.014760] processor ACPI_CPU:00: registered as cooling_device0 [ 1.014847] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.015108] ACPI: SSDT CFEE8580, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 1.015438] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 1.015629] processor ACPI_CPU:01: registered as cooling_device1 [ 1.015716] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.015982] ACPI: SSDT CFEE86E0, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20040311) [ 1.016314] ACPI: CPU2 (power states: C1[C1] C2[C2]) [ 1.016458] processor ACPI_CPU:02: registered as cooling_device2 [ 1.016534] ACPI: Processor [CPU2] (supports 8 throttling states) [ 1.016820] ACPI: SSDT CFEE8840, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20040311) [ 1.017172] ACPI: CPU3 (power states: C1[C1] C2[C2]) [ 1.017341] processor ACPI_CPU:03: registered as cooling_device3 [ 1.017441] ACPI: Processor [CPU3] (supports 8 throttling states) [ 1.019494] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.263351] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.264155] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.265517] loop: module loaded [ 1.265678] PPP generic driver version 2.4.2 [ 1.265837] PPP Deflate Compression module registered [ 1.265912] PPP BSD Compression module registered [ 1.266158] PPP MPPE Compression module registered [ 1.266244] NET: Registered protocol family 24 [ 1.266359] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.266446] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.266542] r8169 0000:05:00.0: setting latency timer to 64 [ 1.266641] r8169 0000:05:00.0: irq 33 for MSI/MSI-X [ 1.266862] eth0: RTL8168c/8111c at 0xf7c28000, 00:1f:d0:a0:cb:61, XID 3c4000c0 IRQ 33 [ 1.269741] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.269819] r8169 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.269912] r8169 0000:06:00.0: setting latency timer to 64 [ 1.269982] r8169 0000:06:00.0: irq 34 for MSI/MSI-X [ 1.270236] eth1: RTL8168c/8111c at 0xf7c2c000, 00:1f:d0:a0:cb:63, XID 3c4000c0 IRQ 34 [ 1.273169] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.273255] r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.273348] r8169 0000:07:00.0: setting latency timer to 64 [ 1.273422] r8169 0000:07:00.0: irq 35 for MSI/MSI-X [ 1.273719] eth2: RTL8168c/8111c at 0xf7c30000, 00:1f:d0:a0:cb:71, XID 3c4000c0 IRQ 35 [ 1.276608] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.276684] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.276777] r8169 0000:08:00.0: setting latency timer to 64 [ 1.276847] r8169 0000:08:00.0: irq 36 for MSI/MSI-X [ 1.277156] eth3: RTL8168c/8111c at 0xf7c34000, 00:1f:d0:a0:cb:73, XID 3c4000c0 IRQ 36 [ 1.280163] Driver 'sd' needs updating - please use bus_type methods [ 1.283106] Driver 'sr' needs updating - please use bus_type methods [ 1.286074] ahci 0000:00:1f.2: version 3.0 [ 1.286082] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.289021] ahci 0000:00:1f.2: irq 37 for MSI/MSI-X [ 1.289065] ahci: SSS flag set, parallel bus scan disabled [ 1.292065] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.295149] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems [ 1.298307] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.298583] scsi0 : ahci [ 1.301994] scsi1 : ahci [ 1.305360] scsi2 : ahci [ 1.308696] scsi3 : ahci [ 1.312049] scsi4 : ahci [ 1.315427] scsi5 : ahci [ 1.318884] ata1: SATA max UDMA/133 abar m2048@0xec606000 port 0xec606100 irq 37 [ 1.322227] ata2: SATA max UDMA/133 abar m2048@0xec606000 port 0xec606180 irq 37 [ 1.325528] ata3: SATA max UDMA/133 abar m2048@0xec606000 port 0xec606200 irq 37 [ 1.328836] ata4: SATA max UDMA/133 abar m2048@0xec606000 port 0xec606280 irq 37 [ 1.332181] ata5: SATA max UDMA/133 abar m2048@0xec606000 port 0xec606300 irq 37 [ 1.335454] ata6: SATA max UDMA/133 abar m2048@0xec606000 port 0xec606380 irq 37 [ 1.643034] ata1: SATA link down (SStatus 0 SControl 300) [ 1.962032] ata2: SATA link down (SStatus 0 SControl 300) [ 2.434049] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.465557] ata3.00: HPA detected: current 312579695, native 312581808 [ 2.468598] ata3.00: ATA-8: ST3160813AS, CC2H, max UDMA/133 [ 2.471620] ata3.00: 312579695 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.516407] ata3.00: configured for UDMA/133 [ 2.530123] scsi 2:0:0:0: Direct-Access ATA ST3160813AS CC2H PQ: 0 ANSI: 5 [ 2.533384] sd 2:0:0:0: [sda] 312579695 512-byte hardware sectors: (160 GB/149 GiB) [ 2.536510] sd 2:0:0:0: [sda] Write Protect is off [ 2.539580] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.539601] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.542768] sd 2:0:0:0: [sda] 312579695 512-byte hardware sectors: (160 GB/149 GiB) [ 2.545899] sd 2:0:0:0: [sda] Write Protect is off [ 2.548988] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.549008] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.552170] sda: sda1 sda2 sda3 [ 2.580381] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.583681] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.044048] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.048432] ata4.00: HPA detected: current 976771055, native 976773168 [ 3.051483] ata4.00: ATA-8: ST3500320AS, SD81, max UDMA/133 [ 3.054512] ata4.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.059295] ata4.00: configured for UDMA/133 [ 3.073135] scsi 3:0:0:0: Direct-Access ATA ST3500320AS SD81 PQ: 0 ANSI: 5 [ 3.076570] sd 3:0:0:0: [sdb] 976771055 512-byte hardware sectors: (500 GB/465 GiB) [ 3.079716] sd 3:0:0:0: [sdb] Write Protect is off [ 3.082825] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.082846] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.086070] sd 3:0:0:0: [sdb] 976771055 512-byte hardware sectors: (500 GB/465 GiB) [ 3.089263] sd 3:0:0:0: [sdb] Write Protect is off [ 3.092431] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.092451] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.095637] sdb: sdb1 sdb2 sdb3 [ 3.108624] sd 3:0:0:0: [sdb] Attached SCSI disk [ 3.111973] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 3.573032] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.576659] ata5.00: HPA detected: current 488395055, native 488397168 [ 3.579732] ata5.00: ATA-7: ST3250410AS, 3.AAA, max UDMA/133 [ 3.582735] ata5.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.586494] ata5.00: configured for UDMA/133 [ 3.600100] scsi 4:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5 [ 3.603458] sd 4:0:0:0: [sdc] 488395055 512-byte hardware sectors: (250 GB/232 GiB) [ 3.606586] sd 4:0:0:0: [sdc] Write Protect is off [ 3.609720] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.609740] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.612962] sd 4:0:0:0: [sdc] 488395055 512-byte hardware sectors: (250 GB/232 GiB) [ 3.616150] sd 4:0:0:0: [sdc] Write Protect is off [ 3.619278] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.619306] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.622507] sdc: sdc1 [ 3.642405] sd 4:0:0:0: [sdc] Attached SCSI disk [ 3.645723] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 4.106049] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.109780] ata6.00: HPA detected: current 488395055, native 488397168 [ 4.113107] ata6.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133 [ 4.116401] ata6.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.120414] ata6.00: configured for UDMA/133 [ 4.134100] scsi 5:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5 [ 4.137846] sd 5:0:0:0: [sdd] 488395055 512-byte hardware sectors: (250 GB/232 GiB) [ 4.141325] sd 5:0:0:0: [sdd] Write Protect is off [ 4.144826] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.144846] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.148488] sd 5:0:0:0: [sdd] 488395055 512-byte hardware sectors: (250 GB/232 GiB) [ 4.152077] sd 5:0:0:0: [sdd] Write Protect is off [ 4.155690] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.155710] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.159368] sdd: sdd1 [ 4.180205] sdd: p1 size 488406082 limited to end of disk [ 4.184005] sd 5:0:0:0: [sdd] Attached SCSI disk [ 4.187890] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 4.191730] ahci 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.195477] ahci 0000:0a:00.0: online status unreliable, applying workaround [ 4.199153] ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 4.202782] ahci 0000:0a:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 4.206402] ahci 0000:0a:00.0: setting latency timer to 64 [ 4.206567] scsi6 : ahci [ 4.210305] scsi7 : ahci [ 4.214033] ata7: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 16 [ 4.217663] ata8: SATA max UDMA/133 irq_stat 0x00400040, connection status changed [ 10.503027] ata7: link is slow to respond, please be patient (ready=0) [ 14.229027] ata7: softreset failed (device not ready) [ 14.232534] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 14.236070] ata7: link online but device misclassified, treating as offline [ 20.532026] ata8: link is slow to respond, please be patient (ready=0) [ 24.258028] ata8: softreset failed (device not ready) [ 24.261530] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 24.265081] ata8: link online but device misclassified, treating as offline [ 24.279353] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 24.282974] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 24.286536] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 24.286539] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 24.290119] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 24.297609] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 24.297620] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xec605000 [ 24.310153] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 24.313745] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 24.317228] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.320760] usb usb1: Product: EHCI Host Controller [ 24.324253] usb usb1: Manufacturer: Linux 2.6.29-gentoo-r5 ehci_hcd [ 24.327790] usb usb1: SerialNumber: 0000:00:1a.7 [ 24.331365] usb usb1: configuration #1 chosen from 1 choice [ 24.334953] hub 1-0:1.0: USB hub found [ 24.338449] hub 1-0:1.0: 6 ports detected [ 24.342142] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 24.345636] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 24.345638] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 24.349111] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 24.356480] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 24.356490] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xec604000 [ 24.369152] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 24.372567] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 24.375929] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.379271] usb usb2: Product: EHCI Host Controller [ 24.382606] usb usb2: Manufacturer: Linux 2.6.29-gentoo-r5 ehci_hcd [ 24.385930] usb usb2: SerialNumber: 0000:00:1d.7 [ 24.389347] usb usb2: configuration #1 chosen from 1 choice [ 24.392770] hub 2-0:1.0: USB hub found [ 24.396073] hub 2-0:1.0: 6 ports detected [ 24.399592] uhci_hcd: USB Universal Host Controller Interface driver [ 24.402944] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 24.406248] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 24.406251] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 24.409625] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 24.412913] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100 [ 24.416167] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 24.419453] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.422675] usb usb3: Product: UHCI Host Controller [ 24.425874] usb usb3: Manufacturer: Linux 2.6.29-gentoo-r5 uhci_hcd [ 24.429076] usb usb3: SerialNumber: 0000:00:1a.0 [ 24.432319] usb usb3: configuration #1 chosen from 1 choice [ 24.435579] hub 3-0:1.0: USB hub found [ 24.438741] hub 3-0:1.0: 2 ports detected [ 24.442044] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 24.445232] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 24.445235] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 24.448474] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 24.451657] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200 [ 24.454798] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 24.457926] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.461097] usb usb4: Product: UHCI Host Controller [ 24.464227] usb usb4: Manufacturer: Linux 2.6.29-gentoo-r5 uhci_hcd [ 24.467449] usb usb4: SerialNumber: 0000:00:1a.1 [ 24.470686] usb usb4: configuration #1 chosen from 1 choice [ 24.473903] hub 4-0:1.0: USB hub found [ 24.477040] hub 4-0:1.0: 2 ports detected [ 24.480295] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 24.483465] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 24.483467] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 24.486625] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 24.489757] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000 [ 24.492849] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 24.495928] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.498996] usb usb5: Product: UHCI Host Controller [ 24.502054] usb usb5: Manufacturer: Linux 2.6.29-gentoo-r5 uhci_hcd [ 24.505132] usb usb5: SerialNumber: 0000:00:1a.2 [ 24.508288] usb usb5: configuration #1 chosen from 1 choice [ 24.511472] hub 5-0:1.0: USB hub found [ 24.514529] hub 5-0:1.0: 2 ports detected [ 24.517741] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 24.520802] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 24.520805] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 24.523913] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 24.526999] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 24.530063] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 24.533134] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.536236] usb usb6: Product: UHCI Host Controller [ 24.539324] usb usb6: Manufacturer: Linux 2.6.29-gentoo-r5 uhci_hcd [ 24.542437] usb usb6: SerialNumber: 0000:00:1d.0 [ 24.545625] usb usb6: configuration #1 chosen from 1 choice [ 24.548786] hub 6-0:1.0: USB hub found [ 24.551888] hub 6-0:1.0: 2 ports detected [ 24.555114] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 24.558205] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 24.558207] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 24.561332] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 24.564459] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 24.567535] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 24.570623] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.573716] usb usb7: Product: UHCI Host Controller [ 24.576818] usb usb7: Manufacturer: Linux 2.6.29-gentoo-r5 uhci_hcd [ 24.579925] usb usb7: SerialNumber: 0000:00:1d.1 [ 24.583095] usb usb7: configuration #1 chosen from 1 choice [ 24.586273] hub 7-0:1.0: USB hub found [ 24.589371] hub 7-0:1.0: 2 ports detected [ 24.592612] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 24.595698] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 24.595701] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 24.599070] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 24.602146] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 24.605240] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 24.608331] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 24.611419] usb usb8: Product: UHCI Host Controller [ 24.614494] usb usb8: Manufacturer: Linux 2.6.29-gentoo-r5 uhci_hcd [ 24.617603] usb usb8: SerialNumber: 0000:00:1d.2 [ 24.620777] usb usb8: configuration #1 chosen from 1 choice [ 24.623943] hub 8-0:1.0: USB hub found [ 24.627036] hub 8-0:1.0: 2 ports detected [ 24.630355] Initializing USB Mass Storage driver... [ 24.633483] usbcore: registered new interface driver usb-storage [ 24.636564] USB Mass Storage support registered. [ 24.639840] PNP: No PS/2 controller found. Probing ports directly. [ 24.643374] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 24.646497] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 24.649691] mice: PS/2 mouse device common for all mice [ 24.652900] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 24.656696] cpuidle: using governor ladder [ 24.660687] cpuidle: using governor menu [ 24.663727] No iBFT detected. [ 24.668333] usbcore: registered new interface driver hiddev [ 24.671470] usbcore: registered new interface driver usbhid [ 24.674479] usbhid: v2.6:USB HID core driver [ 24.677554] Advanced Linux Sound Architecture Driver Version 1.0.18a. [ 24.681039] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 24.684168] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 24.695215] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 24.725090] ALSA device list: [ 24.728106] #0: HDA Intel at 0xec600000 irq 22 [ 24.731366] TCP cubic registered [ 24.734339] Initializing XFRM netlink socket [ 24.737297] NET: Registered protocol family 17 [ 24.745353] Using IPI No-Shortcut mode [ 24.748674] registered taskstats version 1 [ 24.853032] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 24.861842] EXT3-fs: sda3: couldn't mount because of unsupported optional features (240). [ 24.865589] EXT2-fs: sda3: couldn't mount because of unsupported optional features (240). [ 24.880687] EXT4-fs: barriers enabled [ 24.901407] kjournald2 starting: pid 812, dev sda3:8, commit interval 5 seconds [ 24.901416] EXT4-fs: delayed allocation enabled [ 24.901418] EXT4-fs: file extents enabled [ 24.911069] EXT4-fs: mballoc enabled [ 24.913975] EXT4-fs: mounted filesystem sda3 with ordered data mode [ 24.916884] VFS: Mounted root (ext4 filesystem) readonly on device 8:3. [ 24.919891] Freeing unused kernel memory: 348k freed [ 24.922914] Write protecting the kernel text: 3788k [ 24.925959] Write protecting the kernel read-only data: 1324k [ 24.966906] khelper used greatest stack depth: 6436 bytes left [ 24.975890] usb 2-2: New USB device found, idVendor=058f, idProduct=6387 [ 24.978950] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 24.981930] usb 2-2: Product: Mass Storage Device [ 24.984916] usb 2-2: Manufacturer: JetFlash [ 24.987880] usb 2-2: SerialNumber: Q3NWCT2T [ 24.990968] usb 2-2: configuration #1 chosen from 1 choice [ 24.994437] scsi8 : SCSI emulation for USB Mass Storage devices [ 24.997750] usb-storage: device found at 2 [ 24.997753] usb-storage: waiting for device to settle before scanning [ 25.203157] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 25.320960] stty used greatest stack depth: 6052 bytes left [ 25.376775] usb 4-1: New USB device found, idVendor=046d, idProduct=c51a [ 25.376780] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 25.376783] usb 4-1: Product: USB Receiver [ 25.376786] usb 4-1: Manufacturer: Logitech [ 25.376920] usb 4-1: configuration #1 chosen from 1 choice [ 25.385127] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input0 [ 25.393172] generic-usb 0003:046D:C51A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-1/input0 [ 25.395853] mount used greatest stack depth: 5912 bytes left [ 25.397920] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input1 [ 25.405570] generic-usb 0003:046D:C51A.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-1/input1 [ 25.611076] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 25.761831] usb 5-1: New USB device found, idVendor=046d, idProduct=c223 [ 25.761834] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 25.761837] usb 5-1: Product: G11 Keyboard [ 25.761905] usb 5-1: configuration #1 chosen from 1 choice [ 25.764896] hub 5-1:1.0: USB hub found [ 25.766819] hub 5-1:1.0: 4 ports detected [ 26.046811] usb 5-1.1: new low speed USB device using uhci_hcd and address 3 [ 26.170808] usb 5-1.1: New USB device found, idVendor=046d, idProduct=c221 [ 26.170814] usb 5-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 26.170818] usb 5-1.1: Product: Gaming Keyboard [ 26.170907] usb 5-1.1: configuration #1 chosen from 1 choice [ 26.188084] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.0/input/input2 [ 26.215473] generic-usb 0003:046D:C221.0003: input,hidraw2: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1a.2-1.1/input0 [ 26.247874] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.1/5-1.1:1.1/input/input3 [ 26.256503] generic-usb 0003:046D:C221.0004: input,hiddev97,hidraw3: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1a.2-1.1/input1 [ 26.321809] usb 5-1.4: new full speed USB device using uhci_hcd and address 4 [ 26.444796] usb 5-1.4: New USB device found, idVendor=046d, idProduct=c225 [ 26.444801] usb 5-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 26.444805] usb 5-1.4: Product: G11 Keyboard [ 26.444895] usb 5-1.4: configuration #1 chosen from 1 choice [ 26.453921] input: G11 Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.4/5-1.4:1.0/input/input4 [ 26.461504] generic-usb 0003:046D:C225.0005: input,hiddev98,hidraw4: USB HID v1.11 Keypad [G11 Keyboard] on usb-0000:00:1a.2-1.4/input0 [ 26.472874] nvidia: module license 'NVIDIA' taints kernel. [ 26.726755] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 26.726761] nvidia 0000:01:00.0: setting latency timer to 64 [ 26.727038] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.29 Wed Feb 4 23:44:25 PST 2009 [ 26.919003] EXT4 FS on sda3, internal journal on sda3:8 [ 26.944568] mount used greatest stack depth: 5464 bytes left [ 28.301189] Adding 530136k swap on /dev/sda2. Priority:-1 extents:1 across:530136k [ 29.998129] scsi 8:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2 [ 29.999492] sd 8:0:0:0: [sde] 15687680 512-byte hardware sectors: (8.03 GB/7.48 GiB) [ 29.999994] sd 8:0:0:0: [sde] Write Protect is off [ 29.999996] sd 8:0:0:0: [sde] Mode Sense: 03 00 00 00 [ 29.999998] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 30.001480] sd 8:0:0:0: [sde] 15687680 512-byte hardware sectors: (8.03 GB/7.48 GiB) [ 30.001992] sd 8:0:0:0: [sde] Write Protect is off [ 30.001995] sd 8:0:0:0: [sde] Mode Sense: 03 00 00 00 [ 30.001997] sd 8:0:0:0: [sde] Assuming drive cache: write through [ 30.001999] sde: sde1 [ 30.307986] sd 8:0:0:0: [sde] Attached SCSI removable disk [ 30.308075] sd 8:0:0:0: Attached scsi generic sg4 type 0 [ 30.313172] usb-storage: device scan complete [ 35.292006] r8169: eth0: link up [ 35.292012] r8169: eth0: link up [ 44.991778] IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs