On Fri, Jul 24, 2009 at 04:52:32AM +0800, Tejun Heo wrote:
> Jeff Garzik wrote:
> > Robert Hancock wrote:
> >> Seems reasonable to me, though we may want to print something out
> >> during device identification to indicate that we're using AA (like we
> >> do for ATAPI AN).
> >
> > Agreed -- the user needs some indication, somewhere, that this feature
> > is enabled.
>
> Also, the return value from ata_dev_set_feature() needs to be checked.
> AC_ERR_DEV can be ignored. Other errors should probably set
> inhinit-AA bit and fail the current recovery trial.
Ok, updated patch.
Add SATA DMA setup FIS auto-activate feature in AHCI.
Signed-off-by: Shaohua Li <shaohua.li@xxxxxxxxx>
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 336eb1e..d5d67b8 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2802,7 +2802,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* prepare host */
if (hpriv->cap & HOST_CAP_NCQ)
- pi.flags |= ATA_FLAG_NCQ;
+ pi.flags |= ATA_FLAG_NCQ | ATA_FLAG_FPDMA_AA;
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2c6aeda..68f60f3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2298,29 +2298,48 @@ static inline u8 ata_dev_knobble(struct ata_device *dev)
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
}
-static void ata_dev_config_ncq(struct ata_device *dev,
+static int ata_dev_config_ncq(struct ata_device *dev,
char *desc, size_t desc_sz)
{
struct ata_port *ap = dev->link->ap;
int hdepth = 0, ddepth = ata_id_queue_depth(dev->id);
+ unsigned int err_mask;
+ char *aa_desc = "";
if (!ata_id_has_ncq(dev->id)) {
desc[0] = '\0';
- return;
+ return 0;
}
if (dev->horkage & ATA_HORKAGE_NONCQ) {
snprintf(desc, desc_sz, "NCQ (not used)");
- return;
+ return 0;
}
if (ap->flags & ATA_FLAG_NCQ) {
hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1);
dev->flags |= ATA_DFLAG_NCQ;
}
+ if (!(dev->horkage & ATA_HORKAGE_FPDMA_AA) &&
+ (ap->flags & ATA_FLAG_FPDMA_AA) &&
+ ata_id_has_fpdma_aa(dev->id)) {
+ err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE,
+ SATA_FPDMA_AA);
+ if (err_mask) {
+ ata_dev_printk(dev, KERN_ERR, "failed to enable AA"
+ "(error_mask=0x%x)\n", err_mask);
+ if (err_mask != AC_ERR_DEV)
+ dev->horkage |= ATA_HORKAGE_FPDMA_AA;
+ return -EIO;
+ } else
+ aa_desc = ", AA";
+ }
+
if (hdepth >= ddepth)
- snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth);
+ snprintf(desc, desc_sz, "NCQ (depth %d)%s", ddepth, aa_desc);
else
- snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth);
+ snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
+ ddepth, aa_desc);
+ return 0;
}
/**
@@ -2460,7 +2479,7 @@ int ata_dev_configure(struct ata_device *dev)
if (ata_id_has_lba(id)) {
const char *lba_desc;
- char ncq_desc[20];
+ char ncq_desc[24];
lba_desc = "LBA";
dev->flags |= ATA_DFLAG_LBA;
@@ -2474,7 +2493,9 @@ int ata_dev_configure(struct ata_device *dev)
}
/* config NCQ */
- ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
+ rc = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
+ if (rc)
+ return rc;
/* print device info to dmesg */
if (ata_msg_drv(ap) && print_info) {
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 9c75921..f549405 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -306,6 +306,7 @@ enum {
/* SETFEATURE Sector counts for SATA features */
SATA_AN = 0x05, /* Asynchronous Notification */
SATA_DIPM = 0x03, /* Device Initiated Power Management */
+ SATA_FPDMA_AA = 0x02, /* DMA Setup FIS Auto-Activate */
/* feature values for SET_MAX */
ATA_SET_MAX_ADDR = 0x00,
@@ -525,6 +526,9 @@ static inline int ata_is_data(u8 prot)
#define ata_id_has_atapi_AN(id) \
( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
((id)[78] & (1 << 5)) )
+#define ata_id_has_fpdma_aa(id) \
+ ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
+ ((id)[78] & (1 << 2)) )
#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
#define ata_id_u32(id,n) \
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 79b6d7f..a8232b9 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -190,6 +190,7 @@ enum {
ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */
ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */
ATA_FLAG_DEBUGMSG = (1 << 13),
+ ATA_FLAG_FPDMA_AA = (1 << 14), /* driver supports Auto-Activate */
ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */
ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */
ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */
@@ -386,6 +387,7 @@ enum {
ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firmware update warning */
ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */
ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */
+ ATA_HORKAGE_FPDMA_AA = (1 << 15), /* skip AA */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
